



Kicker 50CWCS124 Sub CompC 12 Inch Single Voice Coil Car Subwoofer 4Ohm 300w RMS
Couldn't Load Pickup availability
CompC 12" Single Voice Coil Subwoofer - 4 Ohm
50CWCS124
Experience thunderous bass with the BRAND NEW CompC 12 Subwoofer!
Now with an improved cone, larger surround, and enhanced excursion. This high-performance sub ensures non-stop, heat-free music with its perimeter venting. Features include a 4-Ohm voice coil and spring-loaded speaker terminals. Best with 300W power in a sealed or ported enclosure.
Huge value. High performance. The KICKER® CompC™ Subwoofer pumps out the bass with all the intensity your ears can handle.
Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn’t overheat, you get high-performance bass that keeps the music pounding.
- Four-Ohm Voice Coil
- Injection-Moulded Polypropylene Cone
- Perimeter Venting for Thermal Management
- Ribbed Polyurethane Surround
- Signature Yellow Surround Stitching
- High-Strength Spiralead™ Tinsel Leads
- Stamped Steel Basket
- High Temp Voice Coil
- Spring-Loaded Speaker Terminals
The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.
Specification
| Impedance | (Ohms) 4 |
|---|---|
| Sensitivity | (dB @ 1W/1m) 88.3 |
| Frequency Response | (Hz) 27-500 |
| Mounting Depth | (cm) 13.8 |
More specs
| |
What's Included
- Kicker CompC 12 Inch 4 ohm Woofer
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Recently Viewed
Jump back to the products you've been checking out
































