Kicker 49WXA36001 1 Channel Class D Amplifier 3600w RMS
Couldn't Load Pickup availability
Warhorse 3600W Monoblock Class D Subwoofer Amplifier
49WXA36001
Every aspect of the Warhorse was tortured mercilessly in our labs to ensure extreme performance and reliability. It was engineered completely in-house by KICKER Research and Development for ultra-high SPL applications.
Fortified to Go Hard
From the board layout to the rails, to the Tiffany-style RCA connectors, everything about these amps will make a bass head smile from ear to ear. This full-bridge, one-Ohm stable amplifier features dual 1/0 power and ground connections, 4 AWG speaker terminals, dual 8 AWG remote terminals, and quad microprocessor-controlled fans for fast but quiet cooling when you need it.
Engage Competition Mode!
Engage Competition mode to set the input sensitivity to 4 volts, locking the gain potentiometer out for easy gain-matching across multiple amps, amongst other slick features.
Real-Time Status Tools
Warhorse Amps come with a heavy-duty, magnetic-mount diagnostic tool, displaying battery voltage, thermal protection status, power-supply protection, and speaker current overload, all in real time! A premium remote bass-level control, also with magnetic mount, is included with the mono amp as well.
Compatible!
It’s equipped with the KICKER FIT+™ (Fail-safe Integration Technology) differential inputs and a 125mV-40V RCA input range, so the amps are fully compatible with most all factory or aftermarket source units. It’s also start/stop compliant.
Features
- Features extreme reliability under intense bass power and overall use
- Engineered completely in-house by KICKER R&D
- Full-bridge Class-D design
- Quad micro-controller-regulated cooling fans
- Capable of daisy-chaining remote power across multiple amps
- Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
- Includes premium remote bass-level control with a magnetic mount – 19.75 feet (6m) RJ45 cable
- Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status – 19.75 feet (6m) RJ45 cable
- Fully compatible with most factory or aftermarket source units (with FIT+™ differential inputs)
Explore the full range in 1 Channel Amplifier.
Specification
| Dynamic Power (watts) | 5000 |
|---|---|
| Frequency Response | (Hz) 10-200 |
| Signal-to-Noise Ratio (dB; ref | 1W output): >70 |
| Input Sensitivity | low level 125mV-5V / high level 1V-40V |
| Selectable Electronic Crossover | Variable Low-pass 50-200Hz, 24dB/octave |
| Subsonic Filter | Defeatable @ 15Hz, 24dB/octave |
| Height | 6.5 |
| Width | 23.2 |
| Length | 39.1 |
More specs
| |
What's Included
- Kicker 49WXA36001
About the brand
Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from 1 Channel Amplifier
More options from the same range, in stock and ready to go
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
