Shop All

Mosconi Pico 4 | 8 DSP Amp 4 Channel Amplifier with 8 Channel DSP Up to 460w

£529.99 Out of stock
Out of Stock
SKU: 91233MPN: MOSCONI PICO 4|8 DSP

MOSCONI PICO 4 | 8 DSP

A compact Class D amplifier with a built-in 8-channel DSP, designed to work seamlessly with factory head units.

4 Channel Amplifier Class D Technology Up to 460 Watts @ 2 Ohm

  • 4 channels at 90W each into 2 ohm
  • Six analog inputs accepting up to 30V — compatible with factory radios
  • Flexible signal routing with 3 x input EQ and delay
  • Two digital inputs: SP-DIF and BT+
  • Two processed line outputs for system expansion
  • Suitable for active, semi-active and front plus rear configurations
Specification
Bluetoothextended digital audio port (BT+)(flexible 8 kHz - 384 kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)
ASRCs from 18 up to 7.75:1 ratio and 139 dB DNR
nput voltage0.3 - 15 V
Overall efficiency> 80 %
Auto-On (only High Level)Off - BTL
Dimensions150 x 133 x 46 mm
Weight1100 Gramm
More specs
  • 4 x analog inputs balanced (high-level) up to 30 V
  • 2 x analog inputs switchable (high level / low level)
  • 1 x digital input SP-Dif optical (8 kHz - 96 kHz sampling rate)
  • 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
  • 912 MHz, 32-bit audio port, 64-bit core
  • Double Precision 56 bit filter calculation
  • 6144 SIMD instructions per sample at 48 kHz
  • 1 x remote connector (analog, for RTC.2 Poti remote control)
  • 1 x bluetooth control port (connection MOS-BT3.0 (app control), RC-Can (CAN-Bus control), MOS_USB2.0 (Programming dongle)
  • 1 x remote out, 1 x remote in, auto remote for high level connection
  • Connections with MOLEX® plug contacts
  • Very small size with low heat generation, best suited for installation behind panels
  • 3 x 9 band parametric input EQ (de-equalizing)
  • 6 x input delay 0 - 3 ms / 0.01 ms (de-delay)
  • 10 x input level control digital (signal conditioning)
  • Flexible mixer for signal routing
  • (Side separated, can sum and subtract, 10 inputs to 4 x 2 output groups)
  • 6 x 30 band or 4 x 30 band + 2 x 15 band group EQ
  • (parametric, relative phase remains stable)
  • 8 x 10 band output filters
  • Highpass / lowpass / highshelf / lowshelf / notch / allpass 1st + 2nd order / speaker-EQ)
  • 8 x speaker-delay 0 - 12ms, 0,02ms
  • 8 x speaker phase switch
  • Output power RMS @ 4Ω:
  • 4 x 90 Watts
  • Output power RMS @ 2Ω:
  • 4 x 115 Watts
  • Output power RMS @ 4Ω:
  • 2 x 85 Watts + 1 x 230 Watts (bridged)
  • Output power RMS @ 4Ω:
  • 2 x 230 Watts (bridged)
  • Line Out:
  • 4 x 2 Vrms Line Out
What's Included
  • MOSCONI PICO 4 | 8 DSP
Product information

Mosconi

Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: How do I choose the right amplifier for my speakers or subwoofer?

A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.

Q: What wiring do I need to install this amplifier?

A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.

Q: What class of amplifier is this and does it matter?

A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.

Q: Will an amplifier work with my factory head unit?

A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.

Q: Can CEN install this amplifier?

A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.