Couldn't Load Pickup availability
SPK-12S2
Spike Series 12" Single 2 Ohm Subwoofer
Are you a music fan who loves that low-end rumble? If so, look no further than the Spike Series Subwoofers! For over 45 years, we've been helping people take their car audio to the next level - and our latest product line is sure to enhance any vehicle's sound system. We are proud to present the ultimate in versatility and durability with AudioControl's Spike Series Subwoofers. These high-performance subwoofers come in a variety of sizes and power ratings to suit your audio needs. No matter what type of music you enjoy, Spike will take your listening experience to the next level. These subwoofers were designed to provide clear, precise bass for an immersive listening experience, so why wait? Load up your trunk with Spike Series Subwoofers today, and crank up your listening pleasure!
Spike Series Subwoofers feature a 3-layer voice coil former to handle some serious power. That means you can turn up the volume and still enjoy heart-pounding bass.
Features
- High Excursion Design for Ultra-Low Bass
- Fiber Matrix Paper Cone with Mica Coating
- 3-Layer High Temp Voice Coil Former
- Dual Damping System for Linear Bass Reproduction
- Dual Dust Cap System for Enclosure Compression Control
- Efficient Heavy-Duty Motor Design
- Removable Subwoofer Grille Included
Explore the full range in AudioControl.
Specification
| Impedance | 2 Ohms |
|---|---|
| Power (Pe) | 500W RMS / 700 W Max |
| Frequency Response | 20-200 Hz |
| Voice Coil | Diameter 2.5 in/63.5 mm |
| Displacement | 0.0885 cu ft/ 2.506 Lt |
| Overall Dimensions | 12.76in/ 324mm |
| Cut Out Diameter | 11.125 in/ 282mm |
| Mounting Depth | 6.14 in/ 156 mm |
| Mounting Height (w/o Grille) | 0.68in / 17.3mm |
| Mounting Height (w/ Grille) | 1.437in / 36.5mm |
| Motor Diameter (w/ Cover) | 6.41in / 163mm |
What's Included
- SPK-12S2
- Manual
- Warranty
AudioControl
About the AudioControl SPK-12S2
From our tech experts at CEN
An AudioControl 12 inch subwoofer, 2 ohm, handling 500w RMS.
Who it suits
Drivers building a system where the bass does real work rather than filling in behind the speakers.
Our tech experts advise
A subwoofer is only as good as its enclosure and the amplifier behind it: box volume and tuning decide what you actually hear, and impedance decides how it should be wired. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full AudioControl range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all AudioControl
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from AudioControl
More options from the same range, in stock and ready to go
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
