Alpine SPC-W84AT6-2 6 Channel DSP Amplifier & Subwoofer for VW Transporter T6.1 & T6
Couldn't Load Pickup availability
6-Channel DSP Amplifier & Subwoofer System for Volkswagen T6.1 / T6 for original Volkswagen radios
SPC-W84AT6-2
Alpine Adventure Audio – Your journey to a new sound experience
Upgrade your Alpine Adventure Audio speaker system for Volkswagen T6.1 or T6 to the Concert Ensemble with the new SPC-W84AT6-2 6-Channel DSP amplifier PDA-S560 and subwoofer system.
This sound upgrade will add lots of power output, dynamic and bass to your existing Alpine speaker system to achieve the ultimate listening experience in your vehicle.
The DSP amplifier is pre-programmed to perfectly match the sound characteristics of the Volkswagen T6.1 and T6, to ensure perfect sound quality, while the included wiring harness for original Volkswagen radios or aftermarket radios featuring RCA pre-amp outputs allows for fast plug-and-play installation in your vehicle.
The included 180 Watt subwoofer with wooden enclosure for installation under the passenger seat adds powerful bass and is even compatible with the rotary seat of the California camping bus.
Enjoy the second generation of Alpine Status sound systems with an even more powerful amplifier.
More Power, More Dynamic
The 1120 Watt (peak power) Alpine DSP amplifier ads much more power and dynamic to your entire sound system and additionally drives the included 180 Watt dual-coil subwoofer. The DSP amplifier is pre-programmed to perfectly match the sound characteristics of the Volkswagen T6.1 / T6 cabin, but can be further adjusted for steering wheel configurations (left or right), radio type and other factors.
Powerful Bass Upgrade
Enjoy strong, powerful bass with the included 180 Watt subwoofer to make all your audio tracks sound even more exciting. The dual-coil subwoofer comes pre-installed in a sealed wooden enclosure, installed under the passenger’s seat of your T6.1 or T6. It is also compatible with the rotary seats of the California version, as well as the seating bench of the Caravelle van (installation position for Caravelle with 2-person bench is under the driver’s seat).
Fast & easy installation
All required installation brackets and cable harnesses are included in the SPC-W84AT6-2 kit to enable a smooth and easy installation. This version includes a plug-and-play wiring harness to connect the sound system to an original Volkswagen T6.1 / T6 radio or aftermarket radios featuring RCA pre-amp outputs.
Compatibility
- Volkswagen T6 California 07/2015 - 10/2019
- Volkswagen T6.1 California 2019 →
- Volkswagen T6 Multivan 07/2015 - 10/2019
- Volkswagen T6.1 Multivan 2019 →
- Volkswagen T6 Transporter 07/2015 - 10/2019
- Volkswagen T6.1 Transporter 2019 →
- Volkswagen T6 Caravelle 07/2015 - 10/2019
- Volkswagen T6.1 Caravelle 2019 →
Compatible with rotary seats and 2 person front bench. Wiring harness designed for connection to original VW radio systems (high power input) or aftermarket radios featuring RCA pre-amp outputs.
Specification
| RMS Power Ratings CH 1-4 into 4 Ohms | 80W RMS x 4 (14.4V at 1% THD+N) |
|---|---|
| RMS Power Ratings CH 5-6 into 2 Ohms | 120W RMS x 2 (14.4V at 1% THD+N) |
| Power Requirement | 12 V |
| Measurements | 142mm x 40mm x 122mm (176mm with connectors plugged in) |
| Frequency response | 10 Hz - 22.000 Hz |
| Measurements | 355mm x 330mm x 170mm |
| Sensitivity | 91dB 1W/W |
More specs
| |
What's Included
- SPC-W84AT6-2
- Included subwoofer grill
- Installation brackets
- Wiring Kit
- 6 Channel DSP Amplifier
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
