Shop All

Hertz H8 DSP 8 Channel Processor 31 Band EQ Time Align + DRC HE Remote Control

£499.99
1 in stock
SKU: 90801MPN: H8 DSP

The Hertz H8 DSP is an eight-channel audio processor with a 31-band EQ and time alignment. The DRC HE remote control comes in the box.

Any Source, Properly Processed

The H8 interfaces with analogue and digital sources alike, turning an ordinary factory system into a high-performance integrated one. Tune each channel’s level, delay and EQ to your exact car.

Specification
Outputs N.8 Graphic-12 dB @ 31 Band
Weightkg/lb 0.6 / 1.322
Fine set 0.02 ms0.7 cm / 0.27 inch
Graphic card min. resolution800 x 600
Ambient operating temperature range0 C to 55 C
More specs
  • Operating power supply voltage 10.8 - 14.4 VDC
  • Power supply 7.5 - 15 VDC
  • Idling current 0.4 A
  • Switched off without DRC 2.5 mA
  • Switched off with DRC 4 mA
  • Remote IN voltage 6.5 - 15 VDC (1.3 mA)
  • Remote OUT voltage 12 VDC (130 mA)
  • INPUT STAGE
  • High Level (Speaker) FL - FR - RL - RR
  • Low Level (Pre) AUX IN
  • Digital Optical IN (S/PDIF max 96 kHz/24bit) OPTICAL IN
  • EQUALIZER
  • On Hi-Levels input (Speaker In) Automatic De-Equalisation On
  • ISO 1/3 Oct. 20 - 20k Hz
  • SIZE
  • W (Width) x H (Height) x D (Depth) mm/inch 191 x 34 x 131 / 7.51" x 1.33" x 4.76"
  • OUTPUT STAGE
  • Low Level Pre (default) FRONT TW L/R, FRONT WF L/R REAR L/R,
  • SUB, CENTER
  • SIGNAL STAGE
  • Distortion - THD @ 1 kHz, 1V RMS Output 0.005%
  • Bandwith @ -3 dB 10 - 22k Hz
  • S/N Ratio @ A weighted
  • Digital input 105 dBA
  • Master Input 95 dBA
  • AUX Input 96 dBA
  • Channel Separation @ 1 kHz 85 dB
  • Input sensitivity (Speaker In) 2 - 15 V RMS
  • Input sensitivity (AUX In) 0.6 - 5 V RMS
  • Input impedance (Speaker In) 2.2 k Ohm
  • Input impedance (AUX) 15 k Ohm
  • Max Output Level (RMS) @ 0.1% THD 4 V RMS
  • CONNECTIONS
  • From / To Personal Computer 1 x USB / B
  • DRC HE Audio controls and Memory / Inputs selection
  • Optical / AUX select Optical In / Aux wire control + 12V / GND enable
  • Memory A / Memory B Memory A / B wire control + 12V / GND enable
  • CROSSOVER N.8 (one for each output channel)
  • Filter Type Full / High Pass / Low Pass / Band Pass
  • Filter mode and slope Linkwitz @ 12 / 24 dB
  • Butterworth @ 6 / 12 / 18 / 24 dB
  • Crossover frequency 68 steps @ 20 - 20k Hz
  • Phase control 0 - 180 degrees
  • TIME ALIGNMENT
  • Distance 0 - 510 cm / 0 - 200.8 inch
  • Delay 0 - 15 ms
  • Step 0.08 ms; 2.8 cm / 1.1 inch
  • GENERAL REQUIREMENTS
  • PC connections USB 1.1 / 2.0 / 3.0 Compatible
  • Software/PC requirements:
  • Microsoft Windows (32/64 bit):
  • XP, Windows 7, Windows 8,
  • Windows 10
What's Included
  • H8 DSP - Signal Interface Processor
  • Power supply cable / Remote / Inputs
  • 3.0 m / 9,84 ft USB cable
  • 4.5 m / 177,16
Product information

About the brand

Hertz

Hertz Electronics is particularly well-known for its high-quality car audio equipment. Their product lineup includes amplifiers, speakers, subwoofers, and complete audio systems that are designed to deliver superior sound clarity and performance. These products are popular among car enthusiasts who seek an enhanced in-car audio experience.

Hertz Electronics continues to build on its legacy of delivering exceptional audio experiences, making it a respected and trusted brand in the electronics industry.

Shop Hertz

Hertz Car Audio Range

Hertz produces high-performance car audio systems driven by research.Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse.

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote