






Edge EDS8DSP-E3 Street Series 8 Channel DSP Digital Sound Processor
Couldn't Load Pickup availability
EDS8DSP-E3
EDGE Street Series 8 Channel DSP Processor
The all new EDSDSP8 DSP processor delivers the most powerful and flexible processing solution in the EDGE range.The EDSDSP8 is a stand alone 8 channel DSP processor which allows the user to simply turn any existing amplifier into a DSP powered beast!
With multiple inputs such as Optical digital and audio streaming, the EDSDSP8 turns any factory headunit into an audio receiver allowing you to wirelessly stream your music while on the move.
The smartphone app allows full control of all settings such as gain, crossover, time alignment, 31 band parametric Eq and many more functions.
The inbuilt mixer allows the input signal to be summed and distributed to any desired channels, perfect for a multiple speaker setup where only a stereo input exists
Key Features
- Cast aluminium chassis
- Auto turn on circuit
- High and low level input
- Optical and coaxial digital input
- Audio streaming receiver
- 8 channel RCA output
- Master volume control via smartphone app
- Source input switching from High level, RCA, optical digital and wireless streaming
- 1/3 octave parametric equaliser with variable Q
- High pass, low pass and bandpass crossover for each channel with variable crossover slope up to 48dB per octave
- Phase control
- Time alignment for each channel
- Powerful mixer allows summing of input signal and distribution to any channel
- Limiter allows full control over system dynamics
- Real time adjustment from the drivers seat allowing easy setup after installation
- All features can be adjusted with intuitive gesture control
Specification
| Model | EDS8DSP-E3 |
|---|---|
| Configuration | 8 channel DSP processor |
| Frequency Response | 10Hz - 30kHz |
| Crossover Type | LP / HP / BP / Flat |
| LP Crossover Range | 20Hz - 20kHz |
| HP Crossover Range | 20Hz - 20kHz |
What's Included
- EDS8DSP-E3 EDGE Street Series 8 Channel DSP Processor
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Recently Viewed
Jump back to the products you've been checking out





































