Brax Graphic GL3 MK2 3 Inch High End Midrange Car Speakers 100w RMS Pair
Couldn't Load Pickup availability
BRAX GRAPHIC GL3 MK2
3.15" / 80 mm High-End Cone Midrange Speaker
It all started with the vision of the passionate music lover and entrepreneur Heinz Fischer, to transfer the sound experience of legendary high-end audio components into an automobile environment without making any compromises in terms of design, technology and sound. following In line to this, our engineers focused on exceptional sound quality and once again pushed the technological limits when they designed our BRAX GRAPHIC speaker series. Outstanding components and unparalleled craftsmanship – solely made in Germany!
Features
- Very stiff lightweight paper cone with unique “MicroSphere” coating consisting of micro ceramic hollow spheres embedded in a polymer layer
- Low-reflection rubber surround for smooth high frequency roll-off
- Aerodynamically shaped aluminum diecast basket with optimized voice coil ventilation
- Polyurethane dustcap for optimization of the frequency response in the upper midrange area
- Ultra-precise machined, vented neodymium magnet system for highest magnetic flux linearity
- Solid stainless steel ring BRAX MR3 optionally available, which can either be used as mounting ring or grille support ring depending on mounting position
Progression in Perfection
In line with BRAX's typical self-conception and commitment, the constant pursuit of perfection is a must, resulting in continuous detailed improvements. The new GL3 MK2 now features a new dust cap made of exceptionally soft polyurethane, ensuring an even more balanced frequency response in the upper midrange and thus achieving maximum tonal neutrality.
A perfect team with maximum tonal harmony
The high-end midrange driver GL3 is, in combination with the GL1 MK2 tweeter and GL6 MK2 mid-woofer, the ideal complement for exceptional three-way constellations in our BRAX GRAPHIC speaker series. Its lively, dynamic sound characteristics and particularly wide frequency range predestine the GL3 MK2 ideal for an extraordinary acoustical experience.
MicroSphere – the material for maximum acoustic precision
The centerpiece of this midrange is its particularly light paper cone with a modified "MicroSphere" coating. Its extremely precise and detailed reproduction harmonizes perfectly with the other speakers in the GRAPHIC series. This patented technology embeds ceramic micro hollow spheres with a mere diameter of 75 µm in a polyamide layer that is applied to the cone.
State-of-the-art technology
The cone is driven by a particularly linear push-pull neodymium magnet system, which is integrated into the aerodynamically sophisticated die-cast aluminum basket. The perfect ventilation of the long-stroke voice coil not only ensures excellent thermal stability, but also prevents compression effects right from the start. The soft rubber surround ensures an extremely low resonance frequency and thus the possibility of a low crossover frequency, ideally in fully active systems.
Details thought through
The love for every single detail manifests the GL3 MK2 as a BRAX transducer at reference level, which meets the highest tonal demands of any music lover. Typically for BRAX, each pair of speakers is given its own serial number and recorded in a service database. This high-end product – Made in Germany – is made perfect by the packaging in an elegant wooden box, which once again underlines the uncompromising philosophy of the BRAX brand.
Specification
| Power handling | RMS/max 100/150 Watts |
|---|---|
| Impedance | 3Ω |
| DC resistance | 2.9Ω |
| Frequency response | 250Hz-8.000Hz |
| Resonance frequency | 80Hz |
| Mechanical Q factor | 2.90 |
| Electrical Q factor | 0.29 |
| Total Q factor | 0.26 |
| Compliance | 1180 μm/N |
| Equivalent air volume | 1.95L |
| Force factor | 4.1Tm |
| Sensitivity | 91dB @ 2.83V 87dB @ 1W/1m |
| Cone | area 35cm² |
| Moving mass | 3.4g |
| Cone | material Paper cone with “MicroSphere” coating consisting of micro ceramic |
| Mechanical resistance | 0.62kg/s |
| Voice coil | diameter 25mm/1" |
| Voice coil | winding height 6mm/0.2" |
| Max. linear excursion | +/- 1.5mm |
| Outer diameter | 92mm/3.6" |
| Installation diameter | 76mm/3.0" |
| Installation depth | 35.5mm/1.4" |
More specs
| |
What's Included
- 2 x High-End Cone Midrange Speaker BRAX GRAPHIC GL3 MK2
- 1 x Allen key
- 1 x Data sheet
FAQs
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
About the brand
Brax
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Audiotec Fischer Brands
High-End Car Hifi components from Audiotec Fischer
