




Brax Graphic GL1 MK2 Hi-End 25mm 1 Inch Aluminium Dome Tweeters 100w RMS Pair
Couldn't Load Pickup availability
BRAX GRAPHIC GL1 MK2
25 mm High-End ceramic aluminium dome tweeter
It all started with a vision of Heinz Fischer, a passionate music lover and Audiotec's founder, to transfer the sound experience of legendary high-end audio components into a car environment. No compromises in terms of design, technology and sound - following these principles our engineers focussed on exceptional sound quality and expanded the technological limits once again when they designed the new BRAX GRAPHIC speaker series. Outstanding components and unparalleled craftsmanship make the difference - of course solely made in Germany!
- Ultra stiff ceramic aluminum hard dome for extremely precise and dynamic treble response
- CNC machined stainless steel housing for maximum heat dissipation
- Integrated, with merino wool dampened coupling volume for low resonance frequency
- Precisely machined, 12 x ventilated neodymium magnet for highest magnetic flux linearity
- Integrated, 24 carat gold plated terminals for maximum conductivity
- Rear mounting ring and fine thread for hidden fastening
- Sturdy protection grille is included in delivery
Brilliant treble reproduction
The 25 mm / 1" high-end tweeter BRAX GRAPHIC GL1 MK2 is equipped with an innovative ceramic aluminium dome. Its sophisticated material requires a complex manufacturing process in which a plasma flame melts a ceramic powder on the surface of an aluminium substrate. The result is a tweeter dome that combines outstanding stability with low moving mass and high inner damping – perfectly made for brilliant and compression-free treble reproduction. The integrated, with Merino wool damped coupling volume reduces the resonance frequency and therefore allows lower crossover frequencies.
Puristic design with sophisticated features
The pure and aesthetic design, made from solid stainless steel does not solely look noble but ensures perfect heat dissipation as well. The mounting ring with fine thread warrants a seamless and decent integration into the car's interior whereas the 12 times drilled neodymium magnet is optimized for highest linear magnetic flux. Finally the recessed, 24-carat gold plated terminal reduces contact resistances to almost zero and the rigid grille perfectly protects the sensitive diaphragm.
Each pair of speakers is unique
Like all BRAX speakers each pair of tweeters has its own serial number, properly recorded in our data base. Needless to say that such valuable products will be delivered in a noble, wooden box emphasizing the approach and the philosophy of the BRAX brand.
Specification
| Power handling | RMS / max. P 100 / 150 Watts |
|---|---|
| Impedance | Z 4 Ω |
| Frequency response | 2,000 Hz - 25,000 Hz |
| Sensitivity | SPL |
| Voice coil | diameter ø 25 mm / 1" |
| Cone | area Sd 4.9 cm² |
| Cone | material Ceramic aluminum hard dome |
More specs
| |
What's Included
- 2 x High-End Tweeter BRAX GRAPHIC GL1 MK2
- 2 x Mounting ring
- 2 x Grille
- 1 x Allen key
- 1 x Data sheet
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Brax
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Audiotec Fischer Brands
High-End Car Hifi components from Audiotec Fischer










































