Phoenix Gold Z1502i Amp 2 Channel Bridgeable Car Amplifier upto 200w RMS
Couldn't Load Pickup availability
Z1502i – 300W 2 Channel Amplifier
OEM connection ready compatible with aftermarket or original source units
The Z1502i features an integrated cooling fan that regulates amplifier temperature for sustained performance, the amp also features an OEM connection compatible with aftermarket or original source units, high level auto turn on which powers on the Z1502i when an audio signal is supplied. A 4-way protection circuit prevents damage caused be Thermal / Reversed power / Polarity / Low voltage / Short circuiting and a heavy duty connector block provides maximum current supply.
Key Features
- Power (MAX) 400W
- Power Ratings (RMS)
- 70W x 2 @ 4Ohm
- 100W x 2 @ 2Ohm
- 200W x 1 @ 4Ohm bridged
- Frequency Response: 20Hz – 20kHz
- Signal to Noise Ratio: >96dB
- High & Low Pass Crossover 6dB per Octave
- Crossover Range: 50Hz – 400Hz
- Bass Boost @ 45Hz 0 to +18dB
- Low – High Level Input Range 0.2V to 10V
- Minimum Load Impedance 2ohm stereo & 4ohm bridged
- Dimensions (LxWxH): 184 x 160 x 48mm
The Z1502i is an impressive 400W amplifier that features an integrated cooling fan that regulates amplifier temperature for sustained performance, the amp also features an OEM connection compatible with aftermarket or original source units, high level auto turn on which powers on the Z1502i when an audio signal is supplied. A 4 way protection circuit prevents damage caused be Thermal / Reversed power / Polarity / Low voltage / Short circuiting and a heavy duty connector block provides maximum current supply.
A high level of engineering has gone into making these amps with low EMI emissions to not interfere with the advanced electronics or FM signal.
Specification
| Frequency Response | 20Hz – 20kHz |
|---|---|
| Signal to Noise Ratio | >96dB |
| Crossover Range | 50Hz – 400Hz |
| Dimensions | (LxWxH) 184 x 160 x 48mm |
More specs
| |
What's Included
- Phoenix Gold Z1502i
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Phoenix Gold
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
