Mosconi Pro 5 | 30 Amp 5 Channel Class A B Stereo Amplifier Up to 1030w RMS
Couldn't Load Pickup availability
MOSCONI PRO 5 | 30 DSP
5 Channel Amplifier Class AB and D Technology Up to 1030 Watts @ 4 Ohm
MOSCONI PRO 5 | 30 DSP
The MOSCONI PRO 5|30 already signals the high-end claim with its design: With rounded aluminum edges and contrasting black perforated sheet insert with illuminated logo, the amplifier looks very noble. The eye finds numerous steps and recesses on which the gaze lingers without the whole thing looking jagged. The Mosconi Pro 5|30 is a hybrid amplifier in a class of its own. With it, extensive system configurations can be realized. With its asymmetrical power distribution, it is, in conjunction with a digital sound processor, perfectly created for active operation.
- Direct DSP (bypassing all preamplifier circuits)
- High level / low level selectable input
- Autosense (only in BTL mode)
- RTC - Allows volume regulation by remote control (optional)
- Power supply and temperature management controlled by microprocessor
Specification
| Output power @ 4Ω | 2 x 95 + 2 x 185 + 1 x 660 Watts |
|---|---|
| Output power @ 2Ω | 2 x 150 + 2 x 290 + 1 x 1030 Watts |
| Input sensitivity | 0.35 V ÷ 12 V (5.3 V in DDSP mode) [CH 1/2/3/4] 0.14 V ÷ 5.9 V (3.1 V in DDSP mode) [CH 5] |
| Dimensions | 500 x 205 x 55 mm |
| Weight | 5,4 kg |
| Crossover | CH 1/2 = HP: 43 ÷ 500 Hz (x 1) or 430 ÷ 5000 Hz (x 10) CH 3/4 = HP: 50 ÷ 200 Hz & LP: 430 ÷ 5000 Hz CH 5 = LP: 43 ÷ 200 Hz |
| Signal to Noise Ratio | > 83 dBA (ref: 1 Watt into 4 Ohm) |
More specs
| |
What's Included
- MOSCONI PRO 5 | 30 DSP
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
