Mosconi Pro 4 | 30 Amp 4 Channel Stereo Bridgeable Amplifier Up to 900w RMS
Couldn't Load Pickup availability
MOSCONI PRO 4 | 30
4 Channel Amplifier Class AAB Technology Up to 1000 Watts @ 2 Ohm
MOSCONI PRO 4 | 30 DSP
Filippo Kania's masterpiece. (chief developer Mosconi)
The MOSCONI PRO 4|30 is a high-end 4-channel amplifier with a new Advanced-AB amplifier technology. With this revolutionary AAB circuit, the PRO 4|30 runs up to 30 Watts RMS in pure Class A mode and spoils the listener with everything that makes a Class A amplifier: airy, fine, rich in detail with an incredible amount of space.
With the combination of an extremely open, finely drawn sound image and its unique naturalness, the PRO 4|30 inspires music from the very first beat.
When performance and headroom are required, it packs a punch with 170 Watts RMS (at 4 Ohm) per channel (450 W bridged).
Specification
| Output power @ 2Ω | 4 x 225 Watts |
|---|---|
| Bridged Output power @ 4Ω | 2 x 450 Watts |
| Input sensitivity | 0.35 V ÷ 12 V (5.3 V in DDSP mode) [CH 1/2/3/4] |
| Dimensions | 500 x 205 x 55 mm |
| Weight | 5,1 kg |
| Crossover | CH 1/2 = HP: 43 ÷ 500 Hz (x 1) or 430 ÷ 5000 Hz (x 10) CH 3/4 = HP: 18 ÷ 220 Hz & LP: 43 ÷ 500 Hz |
| Signal to Noise Ratio > 83 dBA (ref | 1 Watt into 4 Ohm) |
What's Included
- MOSCONI PRO 4 | 30
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
