Couldn't Load Pickup availability
MOSCONI PRO 4 | 10
4 Channel Amplifier Class AB Technology Up to 640 Watts @ 2 Ohm
MOSCONI PRO 4 | 10
The Mosconi Pro 4|10 amplifier is a classic 4 channel Class AB amplifier. Equipped with active crossovers, autosense function as well as a remote level control input, it is very versatile in the vehicle.
- DDSP - Direct DSP (bypassing all preamplifier circuits)
- High level / low level selectable input
- Autosense (only in BTL mode)
- RTC - Allows volume regulation by remote control (optional)
- Power supply and temperature management controlled by microprocessor
Specification
| Output power @ 2Ω | 4 x 160 Watts |
|---|---|
| Bridged Output power @ 4Ω | 2 x 320 Watts |
| Input sensitivity | 0.35 V ÷ 12 V (6.2 V in DDSP mode) |
| Crossover | CH 1/2= HP: 43 ÷ 500 Hz (x 1) or 430 ÷ 5000 Hz (x 10) |
| CH 3/4= HP | 50 ÷ 200 Hz & LP: (430 ÷ 5000 Hz) |
| Dimensions | 235 x 205 x 55 mm |
| Weight | 2,3 kg |
What's Included
- MOSCONI PRO 4 | 10
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
