Mosconi Pico 8 | 10 DSP Amp 8 Channel Amplifier with 10 Channel DSP Up to 600w
Couldn't Load Pickup availability
MOSCONI PICO 8 | 10 DSP
8 Channel Amplifier Class D Technology Up to 600 Watts @ 2 Ohm
MOSCONI PICO 8|10 DSP
Perfect OEM integration:
Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watts + 4 x 90 Watts ideal for active and semi-active systems, as well as classic front + rear + sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.
Transducerless High Speed PWM Amplifiers:
High efficiency PWM output stages with the fastest carrier frequency in the world today (> 2 MHz), enables HiRes audio transmission and the extremely small size. The modulation is done without DAC directly from the 96 kHz TDM signal of the DSP, thus the noise floor is close to zero and THD + N ~ 0.02 % / 1 W.
The Pico 1 is also available as an 18 Volt version. This is specially adapted to the electrical system of the latest Tesla models.
Specification
| ASRCs from 1 | 8 up to 7.75:1 ratio and 139 dB DNR |
|---|---|
| Output power @ 4Ω | 4 x 50 Watts (channel: 1 - 4) 3-Ohm stable (not bridgeable!) |
| Output power @ 4Ω | 4 x 90 Watts (Channel: 5 + 6 / 9 + 10) 2-Ohm stable / bridgeable |
| Output power @ 4Ω | 4 x 50 Watts + 2 x 240 Watts (bridged channel 5 + 6 / 9 + 10) |
| Line Out | 2 x 2 Vrms Line Out (channel: 7 + 8) |
| Overall efficiency | > 80 % |
| Auto-On (only High Level) | Off - BTL |
| Dimensions | 150 x 160 x 46 mm |
| Weight | 1050 gramm |
More specs
| |
What's Included
- MOSCONI PICO 8 | 10 DSP
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
