Mosconi Pico 1 Amp Mono Subwoofer 1 Channel Amplifier Class D Up to 750w RMS
Couldn't Load Pickup availability
MOSCONI PICO 1
1 Channel Amplifier Class D Technology Up to 750 Watts @ 2 Ohm
MOSCONI PICO 1
Full-range PWM amplifier with separate, synchronized modulation and fast high-current mosfets. The Mosconi PICO 1 delivers a full 750 Wrms into two ohms. It provides necessary power even to powerful subwoofers and extreme front systems at any time.
Ideal (subwoofer) supplement to a Mosconi PICO DSP amplifier, but with the high-level and low-level input and its own filters, it can also be used universally.
- Automatic switch-on (only high level, SE or BTL mode)
- Remote volume control (optional)
- Molex connectors
The Pico 1 is also available as an 18 Volt version. This is specially adapted to the electrical system of the latest Tesla models.
Specification
| Input voltage | 0,3 V - 20 V |
|---|---|
| Overall efficiency | > 75 % |
| Auto-On (only High Level) | Off - BTL |
| Low-pass filter | Off / 45 - 310 Hz (12 dB/Oct) |
| Subsonic filter (always on) | 13 Hz (12 dB/Oct) |
| Dimensions | 150 x 115 x 46 mm |
| Weight | 1050 Gramm |
| Output power RMS @ 4Ω | 1 x 500 Watts |
| Output power RMS @ 2Ω | 1 x 750 Watts |
More specs
| |
What's Included
- Gladen Mosconi Pico 1
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
