Edge DBX Series EDBX12D2-E3 Car Sub 2 Ohms 12 Inch Subwoofer 1000w RMS
Couldn't Load Pickup availability
EDBX12D2-E3
EDGE DBX Series 12 inch 2000 watts Subwoofer
This new subwoofer range features our new unique 2 piece dustcap which in included across our entire range. The two piece dustcap gives added rigidty to the cone. This Subwoofer has a pressed steel torsion basket and double stacked high quality ferrite magnets to deliver the correct level of motor force.
Paired with the motor structure we use a 2.5" inch voice coil and a non-pressed paper cone and high roll surround produces an efficient, strong, powerful and accurate bass reproduction.
The DBX subwoofers give you that added depth, volume and bass that is missing from a standard car audio system. Tailored to give high performance at a competitive price.
Features
- Non pressed paper cone
- Wide roll foam surround
- 100 oz dual stacked magnet
- Spring loaded connectors
- Y35 ferrite magnet
- Dual 2 Ohms impedance
- Double stitched surround
Specification
| Model | EDBX12D2-E3 |
|---|---|
| Cone | Non pressed paper cone |
| Surround | Big roll foam - stitched |
| Dustcap | Custom tooled IMPP |
| Voice Coil | Former 2.5" Black Aluminium |
| Spider | 1 layer Black PC |
| Gasket | Rubber |
| Top Plate | 10mm Black anodised |
| T-Yoke | 10mm Black anodised flat |
| Terminal / Wire | Spring loaded connectors |
| Impedance | Dual 2 Ohms |
| RMS Power | 1000 watts |
| Peak Power | 2000 watts |
| Freq Response | 25Hz - 850Hz |
| Overall Diameter | 11" (280mm) |
| Mounting Depth | 6.7" (170mm) |
| Enclosure Volume | 1.5-2.5ft3 |
What's Included
- EDBX12D2-E3
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
