ESB 3.6K3 Tremila Series 3 Way Component Speaker System with Midrange and Tweeters

£329.99
Just Arrived
Low stock

Pickup Available at CEN

Usually ready in 1 hour


3.6K3

3-Way Speaker System

3.28

1.1"/28 mm Dome Tweeter

The tweeter uses a Torcon® diaphragm for a smooth sound, with an outer suspension covered with a high-loss damping material to eliminate edge vibration and resonance. The dome is of extremely low mass and is much less susceptible to mechanical deformation than other tweeters, yet it provides a smooth, linear and very extended response.
The 28 mm voice coil has an aluminum support and very light copper-coated aluminum wire. The coil is ventilated and damped with iron-fluid oil.
The special SVS ventilation design provides two benefits: optimal cooling of the voice coil and avoiding compressing the air at the back of the dome.
The neodymium N42 magnet, a type of magnet with significantly higher performance than "standard" magnets, is optimized with computer simulations to get better efficiency and improve linearity.

3.90

3.5"/90 mm Cone Midrange

ABS basket reinforced with fiberglass. The basket has been engineered to obtain the maximum in terms of torsional rigidity (resistance to bending), but at the same time, offers the minimum resistance to air passage.
Pressed paper cone with waterproof treatment. It is widely recognized that cones made of paper are the ideal marriage between lightness, stiffness and the ability of the cone to dampen any unwanted vibration (read: distortion).
Twin symmetrical wave rubber surround. The Perbunan® rubber edge is much more stable with temperature changes than standard rubber.
The 20 mm voice coil uses an aluminum support with a double layer winding technology of copper wire with an aluminum core.
High grade ferrite magnet, a type of magnet with significantly higher performance than "standard" magnets.

3.165

6.5"/165 mm Mid-Woofer

ABS basket reinforced with fiberglass. The basket has been engineered to obtain the maximum in terms of torsional rigidity (resistance to bending), but at the same time, offers the minimum resistance to air passage.
Pressed paper cone with waterproof treatment. It is widely recognized that cones made of paper are the ideal marriage between lightness, stiffness and the ability of the cone to dampen any unwanted vibration (read: distortion).
High damping, single wave rubber surround. The Perbunan® rubber edge is much more stable with temperature changes than standard rubber.
The 25 mm voice coil uses an aluminum support with a double layer winding technology of copper wire with an aluminum core.
High grade ferrite magnet, a type of magnet with significantly higher performance than "standard" magnets.

Specification

Part Number: 3.6K3

  • 3.28
  • Nominal Impedance: 4 Ohm
  • Nominal Power Handling: 90 Watt
  • Transient Power: 180 Watt
  • Frequency Response: 900 Hz ~ 25 KHz
  • Sensitivity: 94 dB 2.83v/1m
  • 3.90
  • Nominal Impedance: 4 Ohm
  • Nominal Power Handling: 60 Watt
  • Transient Power: 120 Watt
  • Frequency Response: 150 Hz ~ 7 KHz
  • Sensitivity: 91.5 dB 2.83v/1m
  • 3.165
  • Nominal Impedance: 4 Ohm
  • Nominal Power Handling: 120 Watt
  • Transient Power: 240 Watt
  • Frequency Response: 65 Hz ~ 9 KHz
  • Sensitivity: 91.5 dB 2.83v/1m
What's Included

1 Year Warranty

  • 3.28 Tweeters
  • 3.90 Midrange
  • 3.165 Woofers
92460
Product information

About the brand

ESB

ESB has transferred all the experience and innovation from its 55 years of audio leadership into its Car Audio line of products.

Our automotive speakers have the same performance as home loudspeakers, yet are engineered to accurately reproduce music in a vehicle’s challenging acoustic environment. "As good as Live".

Shop ESB

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote