Edge DBX Series EDBX150.4-E1 Amp Class AB 4 Channel Amplifier 600w RMS
Couldn't Load Pickup availability
EDBX150.4-E1
EDGE DBX Series 4 Channel 1200 watts Amplifier
The DBX Series amplifiers have some fantastic new unique features, The New EDGE heatsink has progressive T bar fins promoting heat dispersion to keep the amps cool. The 2 and 4 channel class AB models feature an extended set of filters with the HPF up to 11kHz and the LPF to 4kHz giving much more control of your speakers than the average amplifier.
The all new DBX amplifiers also feature internal fan cooling to keep temperature low when the volume gets high.
When enhanced power for your car audio is your drive, the DBX series amps provide everything you need for high power high quality amplification.
Features
-
BEST DESIGN - The unique “Big E” design integrated into the over-engineered T bar progressive heatsink design offers premium looks with strategical engineering.
-
PREMIUM TUNING - With extended frequency bands on the LPF and HPF crossover the EDBX series amps offer greater tune-ability and set up over its competitors.
-
BEST SOUND - The class AB technology offers great SQ compared to its class D competitors, Leading to rich and warm sound playback.
-
OPTIMISED FUNCTIONS - With 3 crossover options, high and low level inputs, bass Boost and auto sense turn on our DBX series offers all the functionality you need to run any system upgrade.
Specification
| Configuration | 4 channel |
|---|---|
| RMS @ 4 Ohms Stereo | 4 x 100 watts |
| RMS @ 2 Ohms Stereo | 4 x 150 watts |
| RMS @ 4 Ohms Mono | 2 x 300 watts |
| Maximum Power | 1200 watts |
| Frequency Response | 20Hz - 20kHz |
| Crossover Type | LP / HP / Flat |
| Crossover Range | 30Hz - 250Hz |
| Recommended Fuse | 2 x 25A |
| Topology | Class AB |
| Dimensions | (H x W X D) 63mm x 336mm x 179mm (2.5" x 13.2" x 7.1") |
What's Included
- EDBX150.4-E1
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
