Shop All

Hertz Mille Pro MPS 250 S2 Sub 10" 25cm Shallow Car Subwoofer 2 Ohm 500w RMS

£399.99
In stock
SKU: 90851MPN: MPS 250 S2

MPS 250 S2 2 Ohm Single Voice Coil

Mille PRO shallow subwoofers have been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.

Extreme dynamics, unlimited power handling, realistic sound stage

Mille PRO Shallow Subwoofer

MPS 250 is optimized to work in ultra-compact sealed boxes starting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.

Mille PRO shallow subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.

This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.

500 W continuous power handling is an incredible result for such a compact subwoofer. To accomplish this ambitious goal, the Hertz R&D has developed the proprietary AIR (Air Intercooling Revolution) technology, optimizing the fluid dynamics of the inner acoustic structure and the magnetic group to minimize the internal compression of air and maximize cooling capacity. The 6 layers, 1.5 in. (38 mm) voice-coil with cooling openings on the former contributes to the thermal stability of the subwoofer, making MPS subs ready to face to most demanding high-spl listening session.

The design of the magnetic unit has been FEM simulated to maximize force factor (BxL) symmetry and thus obtain an optimal linearity even at high excursions, perfectly controlling the inductance modulation.

Pole piece geometry has been optimized using a breakthrough simulation model that allowed improving unit force factor.

Hertz R&D also focused on modeling the cone/enclosure behavior: inside a sealed box, air behaves like a spring – a non-linear suspension – whose effect must be compensated to obtain a system as linear as possible at high excursions.

Specification
Power Handling- Continuous W    500
Power Handling- Peak W    1000
ImpedanceOhm    2
Voice CoilType    single
Voice CoilØ    38 (1.5)
Frequency ResponseHz    25 - 400
Magnetsize D x d x h mm (in.)    134 x 55 x 36 (5.28 x 2.17 x 1.42)
Weightof one component kg (lb.)    5,11 (11.27)
Magnet   High density flux ferrite
Cone   Polypropylene
More specs
  • Size mm (in.)    250 (10)
  • Depth mm (in.)    82,6 (3.25)
  • No Filter Component    Subwoofers
  • Xmech mm (in.)    20 (0.79)
What's Included
  • Hertz MPS 250 S2
  • Grille
FAQs
Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Product information

About the brand

Hertz

Hertz Electronics is particularly well-known for its high-quality car audio equipment. Their product lineup includes amplifiers, speakers, subwoofers, and complete audio systems that are designed to deliver superior sound clarity and performance. These products are popular among car enthusiasts who seek an enhanced in-car audio experience.

Hertz Electronics continues to build on its legacy of delivering exceptional audio experiences, making it a respected and trusted brand in the electronics industry.

Shop Hertz

Hertz Car Audio Range

Hertz produces high-performance car audio systems driven by research.Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse.

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Reviews

No reviews yet — be the first to review this product.

Write a review