Hertz Mille Legend ML 2500.3 10 Inch Single Voice Coil 4 ohm Subwoofer 700w RMS
Couldn't Load Pickup availability
ML 2500.3 LEGEND 250 (10) mm (in.) | Subwoofers | 1400 W | 4 Ohm Extreme dynamics, unlimited power handling, realistic sound stage
Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse. For this reason, the HertzAudioVideo R&D created ML 2500.3 Legend car audio subwoofer.
- Extraordinary large neodymium magnet, optimized with FEA simulations, to ensure magnetic field stability even under high excursion.
- Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.
- Voice coil internal magnet with high size / performance ratio, for maximum efficiency.
- CCAW, 100 mm (4”) voice coil, capable of handling 1400 W musical power, keeping the working temperature very low, reducing dynamic compression to the minimum.
- Voice coil wound with In/Out method, for even cooling of the different coil layers.
- Voice coil wound on TIL former: this material made from fibreglass combines the heat dissipation properties of aluminium with the stiffness of Polyamide composites, for a no-compromise acoustic performance.
- Central pole featuring “Aluminium Shorting Ring”, for minimum distortion and maximum extension at low frequency.
- “Boundary Free” IIR rubber surround, for higher SPL performance than other subwoofers with same external diameter.
- Exponential V-cone® with optimized geometry for high cone stiffness and strong resistance to deformation even at maximum excursions.
- Mineral-injected paper cone, for superior rigidity and damping.
- Very acoustically transparent anti-resonant aluminium alloy basket featuring six-spoke self-standing structure and built-in venting holes underneath the spider.
- CNC machined elegant diamond-cut basket edge featuring the Hertz logo.
- Ergonomic, ultra-compact design, with array of electro-acoustic parameters optimized for sealed box application with 17 – 25 lt volume.
During the long development phase, the designers set themselves just one ambitious goal: to transfer the emotions of a live performance to the car environment.
Thanks to a completely renewed design, ML2500.3 car audio subwoofers have extremely compact size and are optimized to play in enclosures with reduced boxes. This choice of design combines two requirements hard to achieve up to now: reference performance and ease of installation.
Specification
| Power Handling | - Continuous W 700 |
|---|---|
| Power Handling | - Peak W 1400 |
| Impedance | Ohm 4 |
| Voice Coil | Ø 100 (4) |
| Frequency Response | Hz 27 ÷ 500 |
| Magnet | size D x d x h mm (in.) 95 x 28 x 6 D x d x h (in.) (3.7 x 1.1 x 0.24) |
| Weight | of one component kg (lb.) 7,5 (16.53) |
| Magnet | Neodymium |
| Cone | Pressed-pulp cone with mineral powders |
More specs
| |
What's Included
- One 10" Subwoofer
- Screws
- Speed clips
- Owner's manual
- Template on box
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Hertz
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Hertz Car Audio Range
Hertz produces high-performance car audio systems driven by research.Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse.
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Elettromedia Brands
Evolution of technology and art of sound
