




Audison Voce II AV 10 D4 II Subwoofer Dual 4ohm 10 Inch Sub 550w RMS with Grill
Couldn't Load Pickup availability
AV 10 D4 II Subwoofer Driver | 250 mm | Grille included
Designed for tight spaces and dynamic performance, the AV 10 D4 II delivers powerful, articulate low frequencies with the precision and control that define the VOCE II line.
Its dual 4-ohm voice coil configuration provides greater flexibility for low-impedance system design, allowing optimal power transfer from high-performance amplifiers. The subwoofer features a 1.5-inch CCAW voice coil, FEM-optimized motor assembly and a die-cast aluminum basket with integrated cable-routing hooks—each detail engineered to ensure stability, thermal efficiency and long-term reliability.
- 550 W RMS continuous power handling
Exceptional thermal stability and mechanical robustness ensure reliable management of 550 W RMS continuous power, allowing sustained high-performance bass output. - 1.5 in. (38.6 mm) CCAW voice coil (Copper-Clad Aluminum Wire)
Combines exceptional thermal handling with reduced mass, maximizing responsiveness, precision, and durability under demanding listening conditions - Airflow Venting Cooling (A.V.C.) prevents voice-coil overheating-related limitations
Proprietary AVC technology optimizes airflow and cooling through strategically placed internal channels, efficiently dissipating heat and maintaining consistent performance at high SPL. - Optimized for Compact Sealed Enclosures
Engineered to perform at its best in compact sealed enclosures (12–14 L / 0.4–0.5 ft³), offering deep, controlled bass response even in space-limited setups. - Protective Metal Mesh Grille Included
Comes with a durable black mesh grille and mounting screws, providing reliable cone protection without compromising acoustic transparency or visual elegance.
The extended-profile dust cap improves cone rigidity and damping, while the internal Radial Reinforcement Framework strengthens the mechanical structure during high-excursion operation.
Airflow Venting Cooling technology ensures effective heat dissipation, preserving performance even under prolonged stress.Optimized to perform at its best in compact sealed enclosures (12–14 L / 0.4–0.5 ft³), the AV 10 D2 II delivers deep, clean and fast bass, ideal for systems where space is limited but sonic expectations are high.
It is more than a compact subwoofer, it is a VOCE II-class component built to bring the emotion of music into every detail of your sound system.
Specification
| Impedance | 4+4 Ohm |
|---|---|
| Power Handling | - Peak 1100 W |
| Power Handling | - Continuous 550 W |
| Sensitivity | 83.5 dB |
| Frequency Response | 25 - 400 Hz |
| Voice Coil | Ø 38.6 mm (1.5 in) |
| Magnet | Material HIGH DENSITY FLUX FERRITE |
| Magnet | size D x d x h 134*57*36 mm (in.) |
| Voice Coil | Material CCAW |
| Cone | Material POLYPROPYLENE |
| Surround | Material |
| Voice Coil | Winding Height 37 mm (1.46 in) |
More specs
| |
What's Included
- Audison AV 10 D4 II Sub
- Grill
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Audison
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.



Elettromedia Brands
Evolution of technology and art of sound




































