Zapco Z-150.4 AP Amp 4 Channel Class AB Bridgeable Amplifier 2x800w RMS
Couldn't Load Pickup availability
Z-150.4 AP
4-Ch. Class AB Audiophile Amplifier
Class AB Competition Audiophile Amplifiers, the ultimate Zapco Sound Quality Series
- 4-Channel, Class-AB, Competition Audiophile Amplifier
- Signal to noise ratio of over 110dB
- Coupled the output drivers
- Highest HFE (Gain) Sanken selected output devices
- Differential balanced input stage
- 0.1% resistors for lowest possible noise floor
- TI LME49720 (BJT) op-amps on the inputs
- TI LME49720 (BJT) op-amps in the signal path
- WIMA MKS2 series caps in the signal path
- Extremely low ESR caps throughout
- Proprietary patented RCA connectors
Specification
| Power @ 4Ω | 4 x 150 watts |
|---|---|
| Power @ 2Ω | 4 x 275 watts |
| Power @ 1Ω | 4 x 400 watts * |
| Power @ 4Ω Bridged | 2 x 550 watts |
| Power @ 2Ω Bridged | 2 x 800 watts * |
| Frequency Response | 10Hz to 30,000Hz ±1dB |
| Net Dimensions (mm) | 190(W) x 62(H) x 440(L) |
| Overall Dimensions (mm) | 190(W) x 62(H) x 468(L) |
More specs
| |
What's Included
- Zapco Z-150.2 AP
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Zapco
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
