Mosconi One 6 | 10 Amp 6 Channel DSP Amplifier Class AB Up to 720 Watts @ 2 Ohm
Couldn't Load Pickup availability
MOSCONI ONE 6 | 10 DSP
6 Channel DSP Amplifier Class AB Technology Up to 720 Watts @ 2 Ohm
MOSCONI ONE 6 | 10 DSP
The new MOSCONI ONE 6|10 DSP is a universal 6 channel DSP amplifier in Class AB technology. It is the ideal amplifier for speaker systems in combination with efficient subwoofers.
In addition to the revised optics, this 6-channel amplifier has a 10-channel DSP with the latest software. Thus, the new ONE - Line amplifier series is now also compatible with our GUI 3.xx software and offers you full functionality.
The output side power amp section has remained analog to spoil the listener with a warm and powerful sound image.
Of course, all speaker outputs are bridgeable. Here, almost limitless configurations are open to the user.
With its power of 6 x 100 watts RMS, the ONE 6|10 DSP is sufficiently equipped for large 3-way solutions as well as for complete multi-channel concepts.
For system expansion, the integrated 10-channel DSP offers two additional stereo outputs.
The MOSCONI ONE 6|10 DSP is equipped with a Molex speaker connection. This not only ensures clean cabling, but is also compatible with all plug&play cable sets from our SoundUp program.
- 6 Channel Amplifier
- New design
- Analog amplifier technology
- 10 channel DSP
- Loudspeaker outputs bridgeable
- 6 x 100 watts @ 4 ohms
- 6 x 120 watts @ 2 ohms
- 3 x 240 Watt @ 4 Ohm (bridged)
- Auto On (High Level)
Specification
| Output power @ 2 Ohm | 6 x 120 Watt |
|---|---|
| Output power @ 4 Ohm | 4 x 95 Watt + 1 x 250 Watt BTL |
| Bridged Output power @ 4 Ohm | 3 x 240 Watt |
| Input sensitivity | 0.35 V - 16 V |
| Fuse | 2 x 40 A |
| Analog DSP Output | 4 x 2 Vrms |
| Digital input | Optical (Toslink) |
| Remote Control | RTC (optional) |
| Dimensions | 290 x 210 x 55 mm |
What's Included
- MOSCONI ONE 6 | 10 DSP
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
