Hertz Cento CPK 690 Pro 6x9 Inch 2 Way Car Door Component Speakers 120w RMS Pair
Couldn't Load Pickup availability
Hertz CPK 690 Pro Line
(6 x 9) mm (in.) | System | 360 W | 4 Ohm
The authentic Hertz Sound Experience for the young enthusiasts
The latest addition to the Cento PRO line is the CPK 690 system equipped with an elliptical woofer to avail of the 6 x 9 door placements, which are particularly common in the North American market, such as for the models of Toyota and FORD groups.
Like the other speakers of the Cento PRO line, the woofer cone is made of pressed paper, the most suitable material to obtain a linear and controlled emission even when the woofer is driven with very high power.
All electroacoustic parameters have been optimized to obtain maximum performance with door installations; we therefore find a magnetic group and voice coil improved for an excellent power handling and a lower resonance frequency.
The large emission area of the CP 690 increases the woofer efficiency and extends the response down to 35 Hz.
The crossover made with selected components, features a low-pass filter on the woofer with a 6 dB/oct. slope and
12 dB/oct. on the tweeter with three levels of attenuation.
CPK 690 is dedicated to the young enthusiast who wants a front row seat at their favourite concert while sitting comfortably behind the steering wheel.
CP 25
- Soft Tetolon® fiber 29 mm (1.14 in.) dome and 25 mm (1 in.) voice coil cooled with ferrofluid, for a natural and yet detailed reproduction of musical nuances.
- Center Tuning Duct” geometry, for a lower resonance frequency and reduced harmonic distortion.
- Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range.
- Rear chamber filled with damping material selected and sized for low resonance, ensuring a natural medium range and low crossover frequency with the woofer.
- Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations.
- Wide range of accessories, for easy integration in OEM placements.
CP 690
- Pressed-paper cone with FEM-optimized geometry, it combines rigidity and lightness for a color-free sound.
- 30 mm (1.2 in.) double layer voice coil sized to maximize fhigh excursion and power handling.
- High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels.
- Compact and transparent three-spoke basket, acoustically combin
CPCX 690
- Tweeter level adjustable via a three-position switch (-2, 0, +2 dB) for an optimal tonal balance that can be customized by the user
- Crossover frequency at 3.1 kHz, with a 12 dB/Oct. and 6dB slope for the woofer, which enhances the reconstruction of the virtual stage in the car compartment.
- 160 V metallic finish capacitors with high quality polyester film featuring an ultra low DF value and low resistance pure copper inductances, for maximum sound transparency and clear high frequencies.
- Compact design with metallic finish to the benefit of the ease of installation, with air vents for efficient heat dissipation.
Specification
| Power Handling | - Continuous W 120 |
|---|---|
| Power Handling | - Peak W 360 |
| Impedance | Ohm 4 |
| Sensitivity | dB SPL 92 |
| Frequency Response | Hz 35 ÷ 22,5k |
| Weight | of one component - Woofer 1,69 (3.73) |
| Weight | of one component - Tweeter kg (lb) 0,07 (0.15) |
| Weight | of one component - Crossover kg (lb) 0,2 (0.44) |
More specs
| |
What's Included
- CP 690 Woofers
- CP 25 Tweeters
- CPCX Crossover networks
- Tweeter flush mount clamps
- Angled surface mount housings
- Woofer grilles
- Screws
- Large speed clips
- Small speed clips
- Owner's manual
- Templates on box
FAQs
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
About the brand
Hertz
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Hertz Car Audio Range
Hertz produces high-performance car audio systems driven by research.Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse.
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Elettromedia Brands
Evolution of technology and art of sound
