Edge Xtreme Series EDX5000.1D-E2 Amp Class D 1 Channel Mono Amplifier 5500w RMS
Couldn't Load Pickup availability
EDX5000.1D-E2
EDGE Xtreme Series Monoblock 11000 watts Amplifier
The Xtreme Series from EDGE Audio Presents an all new competition SPL amplifier.
Ultra efficient Class D topology maximises available battery power and minimises losses ensuring maximum power delivery to the subwoofers. 18v DC input stability allowing the user to maximise the power output from the non-regulated power supply.
Dual 0AWG power input terminals allow huge cable to be connected between the vehicles power supply and the amplifier PCB. Amplifier strapping circuit allows 2 amplifiers to be connected together to deliver their combined output power into a single channel delivering up to 11,800 watts RMS.
Parametric bass boost allows the user to boost the frequency of their choice. Low pass and subsonic crossover filters.
12dB per active on-board active crossover network, remote gain control, audio pass through RCA output and full CE certification round out the already impressive specifications list.
Features
- Ultra Class D Monoblock amplifier with high efficiency up to 92%
- Dual 0AWG power input terminals allow hugE gauge cable to be connected.
- MOSFET output stage delivers high power and reliability.
- 1 Ohm low impedance drive.
- Parametric bass boost allows up to +12dB of boost at any frequency between 30Hz and 90Hz.
- Amplifier strapping allows 2 identical amplifiers to be connected to deliver the full power through a single channel.
- Level remote allows easy adjustment of level from the front of the vehicle.
- Full EMI and CE approval.
Specification
| Configuration | Monoblock |
|---|---|
| RMS @ 4 Ohms 14.4v 1% THD | 1 x 1580 watts |
| RMS @ 2 Ohms | 14.4v 1% THD: 1 x 3000 watts |
| RMS @ 1 Ohm 14.4v 1% THD | 1 x 5500 watts |
| RMS @ 1 Ohm 16v 1% THD | 1 x 5700 watts |
| RMS @ 1 Ohm 18v 1% THD | 1 x 5800 watts |
| Maximum Power | 11000 watts |
| Frequency Response | 10Hz - 350Hz |
| Crossover Type | LP / Subsonic |
| Crossover Range | 10Hz - 250Hz |
| Input Sensitivity | 200mv - 8v |
| Topology | Ultra Class D |
| Dimensions | (H x W X D) 59mm x 250mm x 650mm (2.3" x 9.8" x 25.6") |
What's Included
- EDX5000.1-E2
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
