Edge DB Series EDB500.1-E9 Amp Class D 1 Channel Monoblock Amplifier 500w RMS
Couldn't Load Pickup availability
EDB500.1-E9
EDGE DB Series 1000 watts Monoblock Amplifier
Introducing the DB series amplifiers. A range of entry level amps to be paired to power the range of speakers and subwoofers featured in the DB series. Our DB Series amps feature Class D topology, this means they more efficiently produce power and can be manufactured in a compact design for easier installation. Available in single channel and four channel models the amp range features active crossovers, bass boosts and remote gain controls for accurate amp configuration. When power and space are important, utilise the DB series amps to power any DB series speaker, subwoofer and tweeter.
Features
- Built in active crossovers
- Bass boost circuit
- Extruded Aluminium heatsink
- Efficient class D topology
Specification
| Type | Monoblock |
|---|---|
| RMS @ 4 Ohms | 1 x 200 watts |
| RMS @ 2 Ohms | 1 x 350 watts |
| RMS @ 1 Ohms | 1 x 500 watts |
| Maximum Power | 1000 watts |
| Frequency Response | 15Hz - 250Hz |
| Crossover Type | LP / Subsonic |
| Crossover Range | 15Hz - 250Hz |
| Topology | Class D |
| Dimensions | (H x W X D) 46mm x 185mm x 205mm (1.8" x 7.3" x 8.1") |
What's Included
- EDB500.1-E9
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
