Classic Car Stereo Hide Away Bluetooth Amplifier 4x25w Aux In & Line Out for Sub
Couldn't Load Pickup availability
HIDDEN BLUETOOTH AMPLIFIER V2.0
Our new updated hidden Bluetooth amplifier – ideal for retro in car audio solutions!
Our hidden Bluetooth amplifier allows you the option to retain the appearance of your vehicle interior whilst offering a quality sound from your mobile phone or other portable music devices either via Bluetooth, USB or aux input.
The amplifier can be hidden away behind the dashboard, under the seat or even in the boot.
The CR023 can be used as a stand-alone Bluetooth amplifier for audio streaming with either two or four speakers, or it can be used in conjunction with a mono, two or four speaker output radio.
It can also be used to amplify a device that has a line output (or a 3.5 mm headphone jack) by connecting via the phono line input connectors (aux in) and can be connected to an additional amplifier or active sub woofer via the line output channels 5 and 6.
Once installed, the front and rear speaker volume can be balanced using the front and rear gain controls by turning with a suitable screwdriver.
Any further volume adjustment should be made using the audio volume control on your device.
Suitable for 12 volt negative earth systems only.
Failure to connect this product correctly could cause internal damage and void your warranty!
Specification
| Power Output | 4 X 25 Watts (4 Ohms) (F0=1khz Thd+N=10% Dsp Volume Odb) |
|---|---|
| Thd | <0.1% Frequency Response 20hz – 20khz |
| Input Sensitivity | Aux Input 2.5 V-0.25v H Igh Input 10v-1v Signal To Noise >88dba |
| Working Voltage | Dc 14.4v |
| Dimensions | 129 X 101 X 50 Mm |
| Weight | 630g |
What's Included
- CR023 Bluetooth Amplifier
- Owners Manual
- 20 Pin Connector Loom
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Classic Car Stereo
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
