Audison Voce AV 5.1K Amplifier Class A, AB & D Mono & Multi 5 Channel Amp 1650w
Couldn't Load Pickup availability
VOCE AV 5.1k
Amplifier | 1650 W | 2 x 75 W @ 4ohm + 2 x 250 W @ 2ohm + 1 x 1000 W @ 2ohm | AB-class
VOCE
The precious synergy between Voce amplifiers and Full DA HD technology takes the in-car listening experience to a new level of excellence; the synthesis of a unique know-how employed in mobile audio reproduction.
- Hybrid design made up of two 75 W A Class channels, two 250 W AB Class channels, and one 1000 W D Class channel
- Hi-Res audio certification thanks to 4 ÷ 60k Hz bandwidth
AV 5.1k, 1650 W (RMS) max, five channels: with its hybrid design, it is the specialist amplifier for front + rear + subwoofer or multi-amplified front + subwoofer systems. Its high-quality AB Class output stage provides two channels with 250 W (RMS), combined with another pair of A class pure audio channels rated at 75 W (RMS), perfect for active two-way front speaker systems. The D Class mono section provides 1000 W (RMS) for powerful subwoofer output. AV 5.1k also allows you to replace the analog input board with the digital one (AV bit IN).
Specification
| Channels | 5 |
|---|---|
| Bandwidth A (-3 dB) A, B Ch | 5 ÷ 20k Hz |
| -3 dB) C (sub) Ch | 7 ÷ 350 Hz |
| S/N ratio A (A weighted @ 1V) | A, B Ch: 100 dB |
| (A weighted @ 1V) | C (sub) Ch: 87 dB |
| (100 Hz @ 4Ω) C (sub) Ch | 80 |
| • 5 Ch | 75 W x 2 (4Ω) + 140 W x 2 (4Ω) + 1000 W x 1 (2Ω) |
| • 5 Ch | 75 W x 2 (4Ω) + 250 W x 2 (2Ω) + 1000 W x 1 (2Ω) |
| Weight | 7.2 kg |
More specs
| |
What's Included
- AV 5.1k amplifier
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Audison
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Elettromedia Brands
Evolution of technology and art of sound
