Audison Forza AF C4D Amplifier 4 Channel Bridgeable Class D Amp 600w RMS
Couldn't Load Pickup availability
AF C4D 4 CH AMPLIFIER - 600W
Amplifier | 600 W | 4 x 150 W @ 2 ohm | D-class Fully Bridgeable
AUDISON FORZA, THE NEXT LEVEL OF OEM INTEGRATION AND TUNING
- Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology
- Unbeatable power/volume ratio up to 0.47 W RMS/cm³ reaching 81% of efficiency
- Hi-Res compatibility performance, with an extended audio band up to 40 kHz
- Maximum versatility thanks to the possibility of using the bridging option for each pair of power outputs
AUDIOPHILE SOUND YOU EXPECT FROM AUDISON
AF C4D boasts four high-fidelity amplified channels 90W x 4 @4Ω*, 150W x 2 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! The audio band is extended up to 40 kHz earning the coveted High-Resolution certification. Bridging channel pairs results in 300W x 2 @4Ω*, guaranteeing flexible and powerful performance.
*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
all in one state-of-the-art platform!
AF companion amplifiers are designed to add powerful amplifier channels to AF bit processor amplifiers. A plug-and-play signal input harness is included to make connection to AF bit amplifiers straightforward. AF companion amplifiers are also perfect for use with systems controlled and managed by a standalone bit processor, such as a bit One HD Virtuoso.
AF companions have a “straight wire” architecture, without analog preamp functions such as crossover filtering, and are intended for use with external processors. AF M4D boasts four high-fidelity amplified channels 90W x 4 @4Ω*, 150W x 4 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package!
The audio band is extended up to 40 kHz earning the coveted High-Resolution certification. Bridging channel pairs results in 300W x 2 @4Ω*, guaranteeing flexible and powerful performance. *Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
Specification
| Pulse operating voltage | 6.5 ÷ 17.5 VDC |
|---|---|
| Idling current | 1.3 A |
| Standby current draw | 1.5 mA |
| Remote IN | 4 ÷15 VDC (1 mA) |
| Remote OUT | 6.5 ÷15 VDC (150 mA) |
| Damping factor @ 1 kHz , 4Ω, 2 VRMS | 160 |
| Bandwidth @ -3 dB | 10 Hz ÷ 42 kHz |
| Minimum load impedance | 4 Ch: 2Ω |
| 2 Ch – (Bridge 1/2; 3/4) | 4Ω Output Continuous Power (RMS) @14.4 VDC, 1% THD: |
| • 4Ch @ 4Ω | 90 W x 4 |
| • 4Ch @ 2Ω | 150 W x 4 |
| • 2Ch (Bridge 1/2; 3/4) @ 4Ω | 300 W x 2 |
| Output power @ 4Ω, 1% THD+N, 14.4 V | 160 W x 4 |
| SN ratio (ref. 1 W output) | 80 dB |
| Ambient operating temperature range | 0 °C to 55 °C (32 °F to 131 °F) |
| Max size W x H x D (mm/inch) | 240 x 47 x 156 / 9.44 x 1.85 x 6.14 |
| Weight | (kg/lb) 2.04 / 4.49 |
More specs
| |
What's Included
- Audison AF C4D
- Remote In Out Cable
- Pre In Cable
- Speaker Out Cable
- Speaker In Cable
- Install Kit
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Audison
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Elettromedia Brands
Evolution of technology and art of sound
