Mosconi Pico 6 | 8 DSP Amp 6 Channel Amplifier with 8 Channel DSP Up to 440w
Pickup Available at CEN
Usually ready in 1 hour
MOSCONI PICO 6 | 8 DSP
6 Channel Amplifier Class D Technology Up to 440 Watts @ 2 Ohm
MOSCONI PICO 6 | 8 DSP
Perfect OEM integration:
Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3 x input EQ and delay. With 4 x 50 Watts + 2 x 90 Watts ideal for active and semi-active systems, as well as classic front + rear + sub application. With two digital inputs (SP-Dif and BT+) and two processed line outs ready for the future.
Transducerless high-speed PWM power amplifiers:
High-efficiency PWM output stages with the fastest carrier frequency in the world today (> 2 MHz). The modulation is done without DAC directly from the 48 kHz TDM signal of the DSP, thus the noise floor goes to zero and THD+N ~ 0.02 % / 1 W.
Specification
Part Number: MOSCONI PICO 6|8 DSP
- 6 channel amplifier
- Class D technology
- Integrated 8 channel DSP
- Up to 440 Watts total power
- 4 x analog inputs balanced (high-level) up to 30 V
- 2 x analog inputs switchable high level / low level)
- 1 x digital input SP-Dif optical (8 kHz - 96 kHz sampling rate)
- 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
- Bluetooth extended digital audio port (BT+)
- (flexible 8 kHz - 384 kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)
- 912 MHz, 32-bit audio port, 64-bit core
- Double precision 56 Bit filter calculation
- 6144 SIMD instructions per sample at 48 kHz
- ASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR
- 1 x remote connector (analog, for RTC.2 roti remote control)
- 1 x bluetooth control port (Connection MOS-BT3.0 (app control), RC-Can (CAN-Bus control), MOS_USB2.0 (programming dongle)
- 1 x remote out, 1 x remote in, auto remote for high level connection
- Connections with MOLEX® plug contacts
- Very small size with low heat generation, best suited for installation behind panels
- 3 x 9 band parametric input EQ (de-equalizing)
- 6 x input delay 0 - 3 ms / 0.01 ms (de-delay)
- 10 x input level control digital (signal conditioning)
- Flexible mixer for signal routing
- (Side separated, can sum and subtract, 10 inputs to 4 x 2 output groups)
- 6 x 30 band or 4 x 30 band + 2 x 15 band group EQ
- (parametric, relative phase remains stable)
- 8 x 10 band output filters
- Highpass / lowpass / highshelf / lowshelf / notch / allpass 1st + 2nd order / speaker-EQ)
- 8 x speaker-delay 0 - 12 ms, 0,02 ms
- 8 x speaker phase switch
- Output power @ 4Ω:4 x 50 Watts (channel 1 - 4) 3-Ohm stable (not bridgeable!)
- Output power @ 4Ω:2 x 90 Watts (channel 5 - 6) 2-Ohm stable / bridgeable
- Output power @ 4Ω:4 x 50 Watts + 1 x 240 Watts (bridged channel 5 + 6)
- Line Out:2 x 2 Vrms Line Out
- Input voltage:0,3 - 15 V
- Overall efficiency:> 80 %
- Auto-On (only High Level):Off - BTL
- Dimensions:150 x 133 x 46 mm
- Weight:800 Gramm
What's Included
2 Year Warranty
- MOSCONI PICO 6 | 8 DSP
About the brand
Mosconi
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
