Audio Output Interface
Zen A2B
The ZEN-AUDIO DSP12A-A2B processor seamlessly converts 2018+ Ford factory A²B® (Automotive Audio Bus) to 12-channel analog RCA and TOSLink output.
Adding aftermarket amplifiers to the OE B&O or Revel amplified SYNC3 system has never been so simple. This module integrates directly with the OEM A²B® & CAN bus to retain volume control, full fade and balance (analog only), treble, mid-range, bass control & Bluetooth voice calls with no external speaker (true OEM integration).
A²B® is a registered trademark of Analog Devices Inc.
NOTE: this interface (rev 2R0 hardware) replaces KIT873: ZEN-A2B
- Current HW version: -- 3r0 --
- Current SW version: 4.0.11 (website updater only)
- Compatible SW (update) OS: Windows 7 (64 bit), 8, 10
- Digital Input A2B Twisted Pair
- Digital Outputs: TOSLink
- Digital Outputs supported: 24bit/48kHz
- Frequency Response (digital): 18Hz – 24kHz
- Analog Outputs: 12 channels (RCA)
- Output Voltage Peak: 6v
- Output Voltage RMS: 2.1v
- Analog Output Type: Single-Ended
- S/N Ratio (analog): 114dB
- Frequency Response (analog): 18Hz – 24kHz
- THD+N @ -1dBFS -94dB
- DAC 48kHz 32bit
- DSP 32bit Floating Point
- Delay (Time Alignment) Selectable
- Current Consumption Stand-by Current <1 mA
- Consumption Operational Operational Voltage 350 mA MAX
- Amp Turn-On Output 7V – 20V DC Automatic
- Amp Turn-On Voltage V-batt
- Amp Turn-On Current Limitation 500mA
- Dimensions: 4”x5”x1 3/8”
- Weight: 10 oz
- Country of Origin: USA
- ZEN-A2B Interface
- Power Harness
- MOST Fiber
- RCA Harness
- USB Cable
