Morel Supremo 602 Active
Supremo Series 6-1/2" component speaker system
Crafting speakers to perform with lifelike detail takes creativity and an expanse of knowledge. Morel has been perfecting this craft for 45 years, and the flagship Supremo components and systems take the high resolution to levels never experienced in the automotive world. The recipe is based on a no-compromise design using the very best of Morel’s technology.
The woofers blend powerful neodymium magnets with Morel’s EVC motor topology, 3″ diameter Hexatech aluminum voice coil and proprietary carbon fiber and Rohacell sandwich cone. High-frequency details come from the beautiful Supremo Piccolo tweeter, lauded around the world for its unrivaled open and detailed response. Even the most discerning audiophiles will find themselves seduced by the Supremo.
C.A.R FILTER
Controlled Acoustic Resistance – In most automotive applications, speakers are installed in a virtual free-air environment, such as a door, which provides minimal acoustic loading. The C.A.R. Filter™ improves the acoustic loading by controlling airflow within the driver, mimicking the effects of a cabinet while improving power handling by 30%. This provides greater control over the cone movement for improved bass dynamics.
EVC MOTOR
Morel speakers with EVC™ technology utilize voice coils that are up to three times larger than those used in conventional loudspeakers. The EVC™ design moves the magnetic drive system within the voice coil, eliminating stray magnetic flux by effectively directing all the magnetic energy to the voice coil. The result is an ultra-efficient and powerful design, that is highly compact with efficient heat dissipation and reduced cone breakup for lower distortion.
CARBON FIBER CONE
Derived from the drivers of our award-winning fat lady speaker system, this cone design is comprised of two exterior carbon fiber skins sandwiching a layer of Rohacell, a high strength, featherweight foam. The combination forms a cone that is light, strong and properly damped for naturally uncolored audio reproduction.
DMM MOTOR
Morel’s double drive system generates more magnetic energy than a single magnet of similar size, increasing efficiency and the dynamic range. The position of the secondary magnet fixed above the top plate in the motor is the key in controlling stray magnetic flux, thus generating a more focussed magnetic field while also contributing to the “shielded” characteristic of our speakers.
HANDCRAFTED ACUFLEX SOFT DOME
A specially engineered damping compound hand-applied to the soft domes, adding rigidity and damping, which greatly improves the clarity and bandwidth of the tweeter/mid-range. The Acuflex™ diaphragm exhibits controlled cancelling break up (accurate–flexing), meaning each break-up mode is counteracted by another in the opposite direction, enabling smooth frequency response.
- Speaker Size 6 1/2
- Design 2-way
- Tweeter Design 28mm Dome
- Impedance (Ohms) 4
- Tweeter Composition Silk
- Woofer Composition Carbon/Rohacell Sandwich
- Woofer Surround Butyl Rubber
- Sensitivity (1W at 1 meter) N/A
- Sensitivity at 2.83 volts 89
- Frequency Response 30 - 25k Hz
- Minimum RMS Wattage ---
- Maximum RMS Wattage 140
- Peak Power Handling (Watts) 600
- Top-mount Depth (Inches) 2 1/2
- Bottom-mount Depth (Inches) 2 11/16
- Cutout Diameter or Length (inches) 5 5/8
- Mounting Height (Inches) 0.415
- 2 Woofers
- 2 Tweeters (with attached 9" length of speaker wire)
- 2 Lotus woofer grilles
- 2 Lotus tweeter grilles (installed)
- 2mm Allen wrench
- Eight 1-1/4" Screws
- Twelve 3/4" Screws
- 14 Speed clips
- Grille putty
- Four 0.25" Crimp-on female quick slides
- Four 0.110" Crimp-on female quick slides
- User guide
- Morel window sticker
- Genuine product verification instructions
- Tweeter "Birth Certificate" measurement verification
