VX600/2i

2 Ch. Class D Full-Range Amplifier with Integrated DSP, 600 W

2-Channel Class D Full-Range Amplifier with Integrated DSP, 300 W x 2 @ 2 Ω / 180 W x 2 @ 4 Ω - 14.4V

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.

With our second-generation NexD2™ technology, the VX600/2i full-range amplifier outputs up to 180 watts per channel into 4 ohms, or a powerful 300 watts into 2 ohms. It can also be bridged into 4 ohms to generate a stunning 600 W x 1.

The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.

Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.

Amplifier includes: Power Connector (for 4 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, 6 ft A/B USB Cable

• Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω    180 W RMS x 2
• @ 2 Ω    300 W RMS x 2
• Bridged @ 4Ω    600 W RMS x 1
• Rated Continuous (RMS) Power @ 12.5 V
• @ 4 Ω    140 W RMS x 2
• @ 2 Ω    225 W RMS x 2
• Bridged @ 4Ω    450 W RMS x 1
• Frequency Response    12 Hz - 24 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power
• (Analog Inputs)    99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W
• (Analog Inputs)    76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to highest rated power
• (Digital Inputs)    100 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W
• (Digital Inputs)    78 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω    >100 / 50 Hz
• Damping Factor @ 2 Ω    >50 / 50 Hz
• THD+N @ Rated Power    <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs    200 mV - 16 V RMS
• Min.Copper Power / Ground Wire Gauge    4 AWG wire
• Fuse Rating    50 A (AFS, AGU or MaxiFuse™)
• Height (H)    2.12 in / 54 mm
• Width (W)    9.81 in / 250 mm
• Depth (D)    6.62 in / 168 mm
• Net Weight    5.4 lb / 2.45 kg

• 2-Channel amplifier
• Power connector
• 14" Analog Input harness (15-pin D-Sub/4 RCA)
• 18" Speaker output harness
• 6' USB cable (Type A USB on one end and Type B USB on other end)
• 4 Corner caps
• Corner cap tool
• 2 Silver thumbscrews
• 2 Black hex cap machine screws
• 2.5mm Hex wrench
• 3mm Hex wrench
• JL Audio logo badge
• Connection Guide
• Registration card