C2-075ct

0.75-inch (19 mm) Component Tweeters, Pair

C2-075ct 0.75-inch (19 mm) Silk Dome Tweeters

The silk dome tweeter is prized by audiophiles for delivering realistic, non-fatiguing, high-frequency performance.

The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.

Inline 12 dB / octave high-pass filters with tweeter protectors are included with this kit. The C2-075ct is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave.

Sonic character: Clean and Powerful

Sold as a pair.

• Continuous Power Handling (RMS)    60 W
• Peak Music Power*    150 W
• Recommended Amplifier Power (RMS)    25 - 100 W / Ch.
• System Efficiency    91.0 dB @ 1 W / 1 m
• System Nominal Impedance    4 Ω
• System Frequency Response    4 kHz - 22 KHz ± 3 dB
• Flush Mount Fixture Diameter (A1)    1.87 in / 48 mm
• Surface Mount Fixture Diameter (A2)    1.69 in / 43 mm
• Flush Mount Mounting Hole Diameter (B)    1.625 in / 41 mm
• Flush Mount Mounting Depth (C)    0.76 in / 19 mm
• Flush Mount Tweeter Frontal Protrusion (D1)    0.29 in / 7 mm
• Surface Mount Tweeter Frontal Protrusion (D2)    0.92 in / 23 mm

*With supplied crossover

• 2 Tweeters (with 6" wires attached)
• 2 Crossovers
• 2 Flush mount housings (tweeters installed)
• 2 Surface mount housings
• 2 Metal spring clips (for flush mounting)
• Four 5/8" Flat head screws
• Two 25mm Stud bolts
• Two 10mm Stud bolts
• 2 M5 Nuts
• Owner's manual