JL Audio 2 YEAR WARRANTY EARN 179 CEN POINTS

JL Audio C1-650 C1 Series 6.5" 16.5cm Component Car Door Speakers 50w RMS Pair

JL Audio C1-650 C1 Series 6.5" 16.5cm Component Car Door Speakers 50w RMS Pair

Order now. Select express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

£0
£159
RRP £179 SAVE £20
IN STOCK
WE HAVE MORE ON ORDER. EXPECTED AVAILABILITY 1-2 WEEKS.

Frequently Bought With

Dodo Mat DEADN Hex Sound Deadening 10 Sheets Car Van Vibration Damper Proofing
£20 £24 (16% off)

Dodo Mat DEADN Hex Sound Deadening 20 Sheets Car Van Vibration Damper Proofing
£35 £40 (12% off)

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

NOTIFY ME WHEN IN STOCK? WE'LL SEND YOU AN EMAIL WHEN THIS ITEM IS BACK IN STOCK.

C1-650

6.5-inch (165 mm) 2-Way Component Speaker System

C1-650

2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter

C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.

To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.

C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.

Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.

When it comes to value, C1 is the real deal!

Sold as a pair. Grilles not included.

  • Continuous Power Handling (RMS)    50 W
  • Peak Music Power    225 W
  • Recommended Amplifier Power (RMS)    10 - 75 W / Ch.
  • System Efficiency    91.0 dB @ 1 W / 1 m
  • System Nominal Impedance    4 Ω
  • System Frequency Response    59 Hz - 22 KHz ± 3 dB
  • C1-650
  • Product Information

    C1-650

    6.5-inch (165 mm) 2-Way Component Speaker System

    C1-650

    2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter

    C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.

    To facilitate fit, multi-application adaptor rings are included for the C1-650 woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well. Surface and flush mounts are included with C1 tweeters for maximum installation versatility.

    C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650 is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spiders to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.

    Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.

    When it comes to value, C1 is the real deal!

    Sold as a pair. Grilles not included.

  • Specification
    • Continuous Power Handling (RMS)    50 W
    • Peak Music Power    225 W
    • Recommended Amplifier Power (RMS)    10 - 75 W / Ch.
    • System Efficiency    91.0 dB @ 1 W / 1 m
    • System Nominal Impedance    4 Ω
    • System Frequency Response    59 Hz - 22 KHz ± 3 dB
  • What's Included
    • C1-650
View / write a review

There are no reviews for this product.