JL Audio 2 YEAR WARRANTY EARN 269 CEN POINTS

JL Audio 10W1v3-2 10" 25cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS

JL Audio 10W1v3-2 10" 25cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS

Order now. Select express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

£0
£229
RRP £269 SAVE £40
LOW STOCK
WE HAVE MORE ON ORDER. EXPECTED AVAILABILITY 1-2 WEEKS.

NOTIFY ME WHEN IN STOCK? WE'LL SEND YOU AN EMAIL WHEN THIS ITEM IS BACK IN STOCK.

10W1v3-2

10-inch (250 mm) Subwoofer Driver, 2 Ω

W1v3 10-inch Subwoofer (300 W, 2 Ω)

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.

The 10W1v3-2 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. 

  • Continuous Power Handling (RMS)    300 W
  • Recommended Amplifier Power (RMS)    75 - 300 W
  • Nominal Impedance (Znom)    2 Ω
  • Nominal Diameter    10.0 in / 250 mm
  • Overall Diameter (A)    10.5 in / 267 mm
  • Mounting Hole Diameter (B)    9.0625 in / 230 mm
  • Bolt Hole Circle Diameter (C)    9.7 in / 246 mm
  • Motor Outer Diameter (D)    4.92 in / 125 mm
  • Mounting Depth (E)    4.6 in / 117 mm
  • Driver Displacement    0.037 cu ft / 1.05 L
  • Net Weight    9.9 lb / 4.5 kg
  • Free Air Resonance (Fs)    26.15 Hz
  • Electrical “Q” (Qes)    0.475
  • Mechanical “Q” (Qms)    7.243
  • Total Speaker “Q” (Qts)    0.446
  • Equivalent Compliance (Vas)    1.533 cu ft / 43.41 L
  • One-Way Linear Excursion (Xmax)*    0.45 in / 11 mm
  • Reference Efficiency (no)    0.16%
  • Efficiency (1 W / 1 m)**    84.2 dB SPL
  • Effective Piston Area (Sd)    53.584 sq in / 0.0346 sq m
  • DC Resistance (Re)    3.902 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.

** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

  • 10W1v3-2
  • Black plastic trim ring
  • Owner's manual
  • Product Information

    10W1v3-2

    10-inch (250 mm) Subwoofer Driver, 2 Ω

    W1v3 10-inch Subwoofer (300 W, 2 Ω)

    The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary.  Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.

    The 10W1v3-2 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure. 

  • Specification
    • Continuous Power Handling (RMS)    300 W
    • Recommended Amplifier Power (RMS)    75 - 300 W
    • Nominal Impedance (Znom)    2 Ω
    • Nominal Diameter    10.0 in / 250 mm
    • Overall Diameter (A)    10.5 in / 267 mm
    • Mounting Hole Diameter (B)    9.0625 in / 230 mm
    • Bolt Hole Circle Diameter (C)    9.7 in / 246 mm
    • Motor Outer Diameter (D)    4.92 in / 125 mm
    • Mounting Depth (E)    4.6 in / 117 mm
    • Driver Displacement    0.037 cu ft / 1.05 L
    • Net Weight    9.9 lb / 4.5 kg
    • Free Air Resonance (Fs)    26.15 Hz
    • Electrical “Q” (Qes)    0.475
    • Mechanical “Q” (Qms)    7.243
    • Total Speaker “Q” (Qts)    0.446
    • Equivalent Compliance (Vas)    1.533 cu ft / 43.41 L
    • One-Way Linear Excursion (Xmax)*    0.45 in / 11 mm
    • Reference Efficiency (no)    0.16%
    • Efficiency (1 W / 1 m)**    84.2 dB SPL
    • Effective Piston Area (Sd)    53.584 sq in / 0.0346 sq m
    • DC Resistance (Re)    3.902 Ω

    * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.

    ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

  • What's Included
    • 10W1v3-2
    • Black plastic trim ring
    • Owner's manual
View / write a review

There are no reviews for this product.