MP 25.3 PRO

29 (1.14) mm (in.) | Tweeter | 120 W | 4 Ohm

Extreme dynamics, unlimited power handling, realistic sound stage

The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.

• Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.
• Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
• High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
• 25mm ferrofluid-cooled mobile voice coil.
• Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
• Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
• Wide array of installation accessories, for an easy OEM integration.

Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.

The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.

• Component    Tweeter
• Size mm (in.)    29 (1.14)
• Power Handling - Peak W    120
• Power Handling - Peak Note    (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
• Impedance Ohm    4
• Voice Coil Ø    25 (1)
• Frequency Response Hz    1.4k ÷ 22.5k
• Magnet size D x d x h mm (in.)    24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
• Weight of one speaker kg (lb.)    0.07 (0.14)
• Magnet    Neodymium
• Dome    Tetolon

• Hertz MP 25.3 Mille PRO
• Angle support
• Flush mounting ring
• Watchband
• Tweeter gasket