Focal Polyglass Line PS 165V1

Performance Expert Series 6-1/2" component speaker system

2-WAY COMPONENT KIT – 6’’ (16,5CM) WOOFER

This 2-way component kit with 61/2″ woofers truly bears the Focal signature. The PS 165 V1 is equipped with the same cutting-edge technologies as the other speaker drivers in the Performance line: Polyglass cone, diamond-cut aluminium chassis, phase plug and processed aluminium inverted dome tweeters.

The PS 165 V1 car audio kit really makes the difference. It can very easily be used to set up a high-quality customised installation. Its separable crossover, with one part for the woofer, the other for the tweeter, makes it much easier to install. Offering high-fidelity sound and high sensitivity, the PS 165 V1 will ensure you get the best performance, whether you use an amplifier or not.

Create your sound thanks to this high-performance car audio kit. The expert engineers at Focal have come up with a high-quality kit which combines power, high-fidelity, durability and a compact design. Offer yourself the best without compromise with the PS 165 V1 speaker driver.

Key points:

• Create your own sound in your car with this two-way component kit.
• Polyglass cone
• Partial horn loading tweeter
• High sensitivity
• Dynamics and neutrality
• Adjustable tweeter levels
• Three tweeter cut-off frequencies
• Three tweeter integration possibilities

• Speaker Size    6 1/2
• Design    2-way
• Tweeter Design    Inverted Dome
• Impedance (Ohms)    4
• Tweeter Composition    Aluminum
• Woofer Composition    Polyglass
• Woofer Surround    Butyl Rubber
• Parts Warranty    1 Year
• Labor Warranty    1 Year
• Specifications
• Sensitivity (1W at 1 meter)    N/A
• Sensitivity at 2.83 volts    92.5
• Frequency Response    60 - 20k Hz
• Minimum RMS Wattage    ---
• Maximum RMS Wattage    80
• Peak Power Handling (Watts)    160
• Top-mount Depth (Inches)    2 5/8
• Bottom-mount Depth (Inches)    N/A
• Cutout Diameter or Length (inches)    5 9/16
• Mounting Height (Inches)    0.383

• Two woofers
• Two TNP inverted dome tweeters (with 19" length of speaker wire attached)
• 2 Surface mount tweeter housings (with tweeters installed)
• 2 Angled surface mount tweeter housings
• 2 Woofer crossovers
• 2 Tweeter crossovers
• 2 Woofer grilles
• 2 Woofer grille mounting rings
• 2 Foam woofer gaskets
• 8 Speed clips
• Four 7/8" Flathead screws
• Eight 1" Self-tapping screws
• Eight M4x25mm Machine screws (each with flat washer and lock washer attached)
• Eight M4 Nuts
• Owner's manual (English/ French)
• Focal window sticker