{"title":"Zapco DSP","description":"\u003cp\u003e\u003cstrong\u003eZapco DSP\u003c\/strong\u003e signal processors and integrated amplifiers are designed for upgrading car audio systems, from OEM factory integration through to high-channel DSP tuning. The range suits enthusiasts building or refining a system, with products available from £319.\u003c\/p\u003e\u003cp\u003eIt includes an OEM speaker-level converter with Bass Recovery, a 7-band parametric equaliser and crossover, a standalone 8-channel DSP processor with AutoTune, and combined DSP and Class D amplifiers with up to 16 DSP channels and 12 amplifier channels.\u003c\/p\u003e","products":[{"product_id":"zapco-dsp-z8-iv-at-8-channel-dsp-cirrus-logic-processor-and-remote-control","title":"Zapco DSP-Z8 IV AT 8 Channel DSP Cirrus Logic Processor and Remote Control","description":"\u003cp\u003e\u003cstrong\u003eThe Zapco DSP-Z8 IV AT is an 8-channel in \/ 8-channel out car audio DSP processor with AutoTune, built around a Cirrus Logic CS47048 chipset running at 150MHz\/32-bit, with digital inputs and an included remote control. It is part of Zapco's DSP-Z IV range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHD Bluetooth streaming is available with the optional \u003ca href=\"\/products\/zapco-hd-bt-ii-d-bluetooth-module-for-hdsp-v-adsp-iv-st-x-dsp-iii\"\u003eZapco HD-BT II-D module\u003c\/a\u003e. For a DSP with built-in amplification, see the \u003ca href=\"\/products\/zapco-adsp-z12-iv-10a-12-channel-dsp-10-channel-amplifier\"\u003eZapco ADSP-Z12 IV-10A 12-channel DSP\/amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor: Cirrus Logic CS47048, 150MHz \/ 32-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eChannels: 8 in \/ 8 out\u003c\/li\u003e\n\u003cli\u003eADC: Cirrus Logic CS47048, 32-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eDAC: Cirrus Logic CS8422, 24-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eDigital inputs: 24-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eLow-level input sensitivity: 1–5 VRMS\u003c\/li\u003e\n\u003cli\u003eHigh-level input sensitivity: 2–20V\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10Hz–22.5kHz (–3dB)\u003c\/li\u003e\n\u003cli\u003eTime alignment: 0–15ms in 0.02ms steps\u003c\/li\u003e\n\u003cli\u003eRemote control: included\u003c\/li\u003e\n\u003cli\u003eDimensions: 213(W) x 113(L) x 50(H)mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDSP-Z8 IV AT 8-channel DSP with AutoTune\u003c\/h2\u003e\n\u003cp\u003eThe DSP-Z8 IV AT brings new features, improved control, and enhanced sound quality over its predecessor.\u003c\/p\u003e\n\u003ch2\u003eFull specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDSP Processor: Cirrus Logic CS47048\u003c\/li\u003e\n\u003cli\u003ePower: 150 MHz \/ 32-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003e8-Channels IN, 8-Channels OUT\u003c\/li\u003e\n\u003cli\u003eADC: Cirrus Logic CS47048 32-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eADC Dynamic Range \/ THD: 108dB \/ –98dB\u003c\/li\u003e\n\u003cli\u003eDAC: Cirrus Logic CS8422 24-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eDAC Dynamic Range \/ THD: 140dB \/ –120dB\u003c\/li\u003e\n\u003cli\u003eLow Level (Pre) Sensitivity: 1–5 VRMS\u003c\/li\u003e\n\u003cli\u003eHigh Level (Spk In) Sensitivity: 2–20V\u003c\/li\u003e\n\u003cli\u003eDigital Inputs: 24-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eFrequency Response (–3dB): 10Hz–22.5kHz\u003c\/li\u003e\n\u003cli\u003eS\/N Input: 110dBA (D) \/ 106dBA (A)\u003c\/li\u003e\n\u003cli\u003eTHD Input: 0.002% (D) \/ 0.005% (A)\u003c\/li\u003e\n\u003cli\u003eCrosstalk at 1kHz (DSP only): 90dB\u003c\/li\u003e\n\u003cli\u003eF\/R EQ: Channels 1–6, Graphic \u0026amp; Parametric \/ 31 poles\u003c\/li\u003e\n\u003cli\u003eEffect EQ: Channels 7–8, Graphic \u0026amp; Parametric \/ 11 poles\u003c\/li\u003e\n\u003cli\u003eMute\/Solo: Yes, per channel\u003c\/li\u003e\n\u003cli\u003eTime Alignment Range \/ Steps: 0–15ms \/ 0.02ms\u003c\/li\u003e\n\u003cli\u003eMax Delay: 515cm \/ 0.68cm steps\u003c\/li\u003e\n\u003cli\u003ePolarity: 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003eRemote control: included\u003c\/li\u003e\n\u003cli\u003eHD Bluetooth streaming: available with optional HD-BT II-D module\u003c\/li\u003e\n\u003cli\u003eDimensions: 213(W) x 113(L) x 50(H)mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52566056829194,"sku":"92402","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/DSP-Z8IVAT.jpg?v=1771245630"},{"product_id":"zapco-adsp-z16-iv-12a-integrated-16-channel-dsp-12-channel-class-d-amplifier","title":"Zapco ADSP-Z16 IV-12A Integrated 16 Channel DSP 12 Channel Class D Amplifier","description":"\u003cp\u003e\u003cstrong\u003eThe Zapco ADSP-Z16 IV-12A is an integrated 16-channel Cirrus Logic DSP and 12-channel Class D amplifier delivering 12 x 80 watts at 4 ohms, with optical and coaxial digital inputs and an included remote control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the ADSP-Z16 IV-12A. The Zapco integrated DSP amplifier range is also available as the \u003ca href=\"\/products\/zapco-adsp-z12-iv-10a-12-channel-dsp-10-channel-amplifier\"\u003eADSP-Z12 IV-10A (12-channel DSP, 10-channel amplifier)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eHD Bluetooth streaming is available with the optional Zapco HD-BT II-D module.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDSP: Cirrus Logic CS47048, 16 channels\u003c\/li\u003e\n\u003cli\u003eAmplifier: 12 channels, Class D\u003c\/li\u003e\n\u003cli\u003ePower at 4 ohms: 12 x 80W\u003c\/li\u003e\n\u003cli\u003ePower at 2 ohms: 12 x 120W\u003c\/li\u003e\n\u003cli\u003eBridged power: 6 x 240W at 4 ohms\u003c\/li\u003e\n\u003cli\u003eDigital inputs: optical and coaxial, 24-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eHigh-level input: 2–20V\u003c\/li\u003e\n\u003cli\u003eTime alignment: 0–15ms in 0.02ms steps\u003c\/li\u003e\n\u003cli\u003eDimensions: 213 x 291 x 50mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eADSP-Z16 IV-12A integrated 16-channel DSP and 12-channel Class D amplifier\u003c\/h2\u003e\n\u003cp\u003eNew features, new control and improved sound quality over previous generations.\u003c\/p\u003e\n\n\u003ch2\u003eFull specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDSP Processor: Cirrus Logic CS47048\u003c\/li\u003e\n\u003cli\u003ePower: 150 MHz \/ 32 bit \/ 192 KHz\u003c\/li\u003e\n\u003cli\u003e16 channels\u003c\/li\u003e\n\u003cli\u003eADC: Cirrus Logic CS47048, 32 bit \/ 192 KHz\u003c\/li\u003e\n\u003cli\u003eADC Dynamic Range \/ THD: 108 dB \/ -98 dB\u003c\/li\u003e\n\u003cli\u003eDAC: Cirrus Logic CS47048, 32 bit \/ 192 KHz\u003c\/li\u003e\n\u003cli\u003eDAC Dynamic Range \/ THD: 140 dB \/ -120 dB\u003c\/li\u003e\n\u003cli\u003eLow-level (Pre) sensitivity: 1–5 VRMS\u003c\/li\u003e\n\u003cli\u003eHigh-level (Spk In) sensitivity: 2–20V\u003c\/li\u003e\n\u003cli\u003eOptical digital input: 24 bit \/ 192 KHz\u003c\/li\u003e\n\u003cli\u003eCoaxial digital input: 24 bit \/ 192 KHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-3dB): 10 Hz – 22.5 KHz\u003c\/li\u003e\n\u003cli\u003eS\/N input: 110 dBA (D) \/ 106 dBA (A)\u003c\/li\u003e\n\u003cli\u003eS\/N ratio amp + DSP at max. power: 95 dBA\u003c\/li\u003e\n\u003cli\u003eTHD+N input: 0.002% (D) \/ 0.005% (A)\u003c\/li\u003e\n\u003cli\u003eTHD+N amplifier + DSP analogue input: 0.07%\u003c\/li\u003e\n\u003cli\u003eCrosstalk at 1 KHz (DSP only): 90 dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk amplifier + DSP: 45 dB\u003c\/li\u003e\n\u003cli\u003eAmp power @ 4Ω: 12 x 80 watts\u003c\/li\u003e\n\u003cli\u003eAmp power @ 2Ω: 12 x 120 watts\u003c\/li\u003e\n\u003cli\u003eAmp power @ 4Ω bridged: 6 x 240 watts\u003c\/li\u003e\n\u003cli\u003eF\/R EQ: channels 1–6, graphic \u0026amp; parametric \/ 31 poles\u003c\/li\u003e\n\u003cli\u003eEffect EQ: channels 7–8, graphic \u0026amp; parametric \/ 11 poles\u003c\/li\u003e\n\u003cli\u003eMute\/Solo: yes, per channel\u003c\/li\u003e\n\u003cli\u003eTime alignment range \/ steps: 0–15ms \/ 0.02ms\u003c\/li\u003e\n\u003cli\u003eMax delay: 515cm \/ 0.68cm steps\u003c\/li\u003e\n\u003cli\u003ePolarity: 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003eRemote control included\u003c\/li\u003e\n\u003cli\u003eHD Bluetooth streaming (with optional HD-BT II-D module)\u003c\/li\u003e\n\u003cli\u003ePC\/display connection: USB \/ 6-pin Mini DIN\u003c\/li\u003e\n\u003cli\u003eDimensions: 213(W) x 291(L) x 50(H) mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52566388343050,"sku":"92404","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/ZapcoADSP-Z16IV-12A.jpg?v=1771246141"},{"product_id":"zapco-asp-q2-7-band-parametric-eq-crossover","title":"Zapco ASP-Q2 7 Band Parametric Equalisation EQ\/Crossover","description":"\u003cp\u003e\u003cstrong\u003eThe Zapco ASP-Q2 is a 7-band parametric equaliser and crossover unit from Zapco's ASP range, designed for tuning car audio systems. It features separate bass level control, a subwoofer crossover, a subsonic filter, and front, rear and sub RCA outputs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEQ: 7 parametric bands from 40Hz to 18kHz\u003c\/li\u003e\n\u003cli\u003eEqualisation range: 12dB\u003c\/li\u003e\n\u003cli\u003eSubwoofer frequency: 30–300Hz\u003c\/li\u003e\n\u003cli\u003eSubsonic frequency: 15–50Hz\u003c\/li\u003e\n\u003cli\u003eInputs: 2-channel RCA (Main and Aux)\u003c\/li\u003e\n\u003cli\u003eOutputs: 3-channel RCA (front, rear, sub)\u003c\/li\u003e\n\u003cli\u003ePreamp output: 9.5V RMS \/ 14V peak\u003c\/li\u003e\n\u003cli\u003eSignal to noise: over 110dB\u003c\/li\u003e\n\u003cli\u003eUnit dimensions: 178 x 33 x 138mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eASP-Q2 7-band parametric EQ\/crossover\u003c\/h2\u003e\n\u003cp\u003eThe ASP-Q2 is a serious tuning tool rather than a cosmetic dash accessory. Its 7 bands of parametric equalisation let you apply correction at any point across the frequency spectrum. A separate bass level control lets you balance low frequencies against the highs, and each channel of both Main and Aux inputs has its own independent signal level adjustment.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range: 40Hz–120Hz (Bass), 100Hz–400Hz (Low), 350Hz–900Hz (Mid-Low), 650Hz–1.5kHz (Mid), 1.2kHz–4.5kHz (Mid-High), 4kHz–12kHz (High), 8kHz–18kHz (Super-High)\u003c\/li\u003e\n\u003cli\u003eSubwoofer frequency: 30–300Hz\u003c\/li\u003e\n\u003cli\u003eSubsonic frequency: 15–50Hz\u003c\/li\u003e\n\u003cli\u003eRCA: 2-channel inputs (Main, Aux) + 3-channel outputs (Front, Rear, Sub)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your system requires more advanced digital signal processing, Zapco also offer the \u003ca href=\"\/products\/zapco-dsp-z8-iv-at-8-channel-dsp-cirrus-logic-processor-and-remote-control\"\u003eZapco DSP-Z8 IV AT 8-channel DSP processor\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52567114023178,"sku":"92405","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/asp-q2.jpg?v=1771249638"},{"product_id":"zapco-asp-oe8-2-channel-speaker-level-to-preamp-live-out-converter","title":"Zapco ASP-OE8 8 Channel OEM Speaker Level to Preamp with Bass Recovery","description":"\u003cp\u003e\u003cstrong\u003eThe Zapco ASP-OE8 is an 8-channel OEM speaker-level to preamp converter and line driver with Bass Recovery, part of Zapco's signal processing range. It converts factory head unit speaker outputs to a 9.5V RMS \/ 14V peak preamp signal, preserving signal integrity and bass response when adding an aftermarket amplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 8 in \/ 8 out\u003c\/li\u003e\n\u003cli\u003ePreamp output: 9.5V RMS \/ 14V peak\u003c\/li\u003e\n\u003cli\u003eInput signal summing by channel pair\u003c\/li\u003e\n\u003cli\u003eBass Recovery for factory head units\u003c\/li\u003e\n\u003cli\u003eSignal to noise: over 110dB\u003c\/li\u003e\n\u003cli\u003eTHD: under 0.01%\u003c\/li\u003e\n\u003cli\u003eStereo separation: 90dB\u003c\/li\u003e\n\u003cli\u003eDimensions: 119 x 39 x 214mm (245mm overall length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e8-Ch. OEM Speaker Level to Preamp with Bass Recovery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8-channel in \/ 8-channel out line driver at 9.5V RMS, 14V peak\u003c\/li\u003e\n\u003cli\u003eInput signal summing by channel pair\u003c\/li\u003e\n\u003cli\u003eDash remote for volume and bass control\u003c\/li\u003e\n\u003cli\u003eBass Recovery for factory head units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor a full digital signal processor to pair with your amplifier, Zapco also offer the \u003ca href=\"\/products\/zapco-dsp-z8-iv-at-8-channel-dsp-cirrus-logic-processor-and-remote-control\"\u003eZapco DSP-Z8 IV AT 8-channel DSP with Cirrus Logic processor\u003c\/a\u003e.\u003c\/p\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":52567646273802,"sku":"92406","price":319.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/zapcoASP-OE8.jpg?v=1771250890"},{"product_id":"zapco-adsp-z12-iv-10a-12-channel-dsp-10-channel-amplifier","title":"Zapco ADSP-Z12 IV-10A 12 Channel DSP 10 Channel Amplifier","description":"\u003cp\u003e\u003cstrong\u003eThe Zapco ADSP-Z12 IV-10A is a combined 12-channel Cirrus Logic DSP and 10-channel Class D amplifier, delivering 10 x 80W at 4 ohms, with optical and coaxial digital inputs and a dash remote included. It is part of Zapco's DSP-IV series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHD Bluetooth streaming is available with the optional \u003ca href=\"\/products\/zapco-hd-bt-ii-d-bluetooth-module-for-hdsp-v-adsp-iv-st-x-dsp-iii\"\u003eZapco HD-BT II-D module\u003c\/a\u003e. For 16 DSP channels and 12 amplified channels, see the \u003ca href=\"\/products\/zapco-adsp-z16-iv-12a-integrated-16-channel-dsp-12-channel-class-d-amplifier\"\u003eADSP-Z16 IV-12A\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDSP: Cirrus Logic CS47048, 12 channels\u003c\/li\u003e\n\u003cli\u003eAmplifier: 10 channels, Class D\u003c\/li\u003e\n\u003cli\u003ePower at 4 ohms: 10 x 80W\u003c\/li\u003e\n\u003cli\u003ePower at 2 ohms: 10 x 120W\u003c\/li\u003e\n\u003cli\u003eBridged power: 5 x 240W at 4 ohms\u003c\/li\u003e\n\u003cli\u003eDigital inputs: optical and coaxial, 24-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eHigh-level input: 2–20V\u003c\/li\u003e\n\u003cli\u003eTime alignment: 0–15ms in 0.02ms steps\u003c\/li\u003e\n\u003cli\u003eDimensions: 213 x 291 x 50mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eADSP-Z12 IV-10A integrated 12-channel DSP and 10-channel Class D amplifier\u003c\/h2\u003e\n\u003cp\u003eThe DSP-IV series gives you high-quality source material to work with. Coaxial and optical inputs accept a digital signal directly from your head unit or a portable HD player. There is also a port for HD Bluetooth streaming via the optional HD-BT II-D module, and an interactive digital port that accepts the included Dash Remote — letting you switch input source, cycle through DSP presets, control master volume, and adjust bass amp output.\u003c\/p\u003e\n\u003cp\u003eWithin the DSP-IV range, the ADSP-Z8 IV-6AT offers 6 amplified channels, the ADSP-Z12 IV-10A (12-channel DSP) offers 10 amplified channels, and the ADSP-Z16 IV-12A (16-channel DSP) offers 12 amplified channels. The GUI's Advanced menu includes a Mixing Set function. Note: AutoTune (with optional tuning microphone) is not available on the 12-channel or 16-channel models.\u003c\/p\u003e\n\n\u003ch2\u003eFull specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDSP Processor: Cirrus Logic CS47048\u003c\/li\u003e\n\u003cli\u003ePower: 150 MHz \/ 32-bit \/ 192kHz\u003c\/li\u003e\n\u003cli\u003eDSP Channels: 12\u003c\/li\u003e\n\u003cli\u003eADC: Cirrus Logic CS47048, 32-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eADC Dynamic Range\/THD: 108dB \/ -98dB\u003c\/li\u003e\n\u003cli\u003eDAC: Cirrus Logic CS47048, 32-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eDAC Dynamic Range\/THD: 140dB \/ -120dB\u003c\/li\u003e\n\u003cli\u003eLow-level (pre) sensitivity: 1–5 VRMS\u003c\/li\u003e\n\u003cli\u003eHigh-level (speaker input) sensitivity: 2–20V\u003c\/li\u003e\n\u003cli\u003eOptical digital input: 24-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eCoaxial digital input: 24-bit\/192kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response (-3dB): 10Hz–22.5kHz\u003c\/li\u003e\n\u003cli\u003eS\/N input: 110dBA (D) \/ 106dBA (A)\u003c\/li\u003e\n\u003cli\u003eS\/N ratio amp + DSP at max. power: 95dBA\u003c\/li\u003e\n\u003cli\u003eTHD+N input: 0.002% (D) \/ 0.005% (A)\u003c\/li\u003e\n\u003cli\u003eTHD+N amplifier + DSP analogue input: 0.07%\u003c\/li\u003e\n\u003cli\u003eCrosstalk at 1kHz (DSP only): 90dB\u003c\/li\u003e\n\u003cli\u003eCrosstalk amplifier + DSP: 45dB\u003c\/li\u003e\n\u003cli\u003eAmp power at 4 ohms: 10 x 80W\u003c\/li\u003e\n\u003cli\u003eAmp power at 2 ohms: 10 x 120W\u003c\/li\u003e\n\u003cli\u003eAmp power at 4 ohms bridged: 5 x 240W\u003c\/li\u003e\n\u003cli\u003eF\/R EQ: channels 1–6, graphic \u0026amp; parametric, 31 poles\u003c\/li\u003e\n\u003cli\u003eEffect EQ: channels 7–8, graphic \u0026amp; parametric, 11 poles\u003c\/li\u003e\n\u003cli\u003eMute\/Solo: yes, per channel\u003c\/li\u003e\n\u003cli\u003eTime alignment range\/steps: 0–15ms \/ 0.02ms\u003c\/li\u003e\n\u003cli\u003eMax delay: 515cm \/ 0.68cm steps\u003c\/li\u003e\n\u003cli\u003ePolarity: 0\/180°\u003c\/li\u003e\n\u003cli\u003eRemote control: included\u003c\/li\u003e\n\u003cli\u003eHD Bluetooth streaming: available with optional HD-BT II-D module\u003c\/li\u003e\n\u003cli\u003ePC\/display connection: USB \/ 6-pin Mini DIN\u003c\/li\u003e\n\u003cli\u003eDimensions: 213(W) x 291(L) x 50(H) mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zapco","offers":[{"title":"Default Title","offer_id":53448954446090,"sku":"93541","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/ADSP-Z12IV-10A.jpg?v=1785334316"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/collections\/b4d8c3dc6bd4922faf7386526cc77e0e_bffd63c4-c5cd-4a13-9d69-6eff58fc4833.png?v=1792187832","url":"https:\/\/www.cen.uk\/collections\/zapco-dsp.oembed","provider":"CEN","version":"1.0","type":"link"}