{"title":"Car Speakers","description":"\u003cp\u003e\u003cstrong\u003eReplacement car speakers, from drop-in coaxials to component sets, midrange drivers and vehicle-specific kits, for drivers who want clearer sound than the factory system can deliver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrading your car speakers is one of the most effective ways to improve your sound. Car manufacturers rarely invest much in stock audio systems, so replacement speakers usually give a dramatically clearer, crisper sound. Everything here is UK-spec stock, dispatched from our Nottingham warehouse.\u003c\/p\u003e","products":[{"product_id":"audison-voce-av-x6-5-6-5-16-5cm-car-coaxial-midbass-door-speakers-100w-rms-pair","title":"Audison Voce AV X6.5 6.5\" 16.5cm 2 Way Car Coaxial Door Speakers 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Voce AV X6.5 is a pair of 165mm (6.5\") 2-way coaxial car speakers from Audison's Voce range, rated at 100W RMS \/ 200W peak, with a 4-ohm impedance and a 25mm Tetolon dome neodymium tweeter mounted coaxially over a cotton-fibre pressed paper woofer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165mm (6.5\") woofer, 25mm tweeter\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W RMS continuous, 200W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz–22kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91dB\u003c\/li\u003e\n\u003cli\u003eCrossover: on-wire, 3.5kHz at 6\/12dB\/oct\u003c\/li\u003e\n\u003cli\u003eVoice coil: 30mm CCAW, double layer\u003c\/li\u003e\n\u003cli\u003eWeight: 1.3kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVoce AV X6.5 coaxial: 200W peak, 165mm, 4 ohms\u003c\/h2\u003e\n\u003cp\u003eThe AV X6.5 builds on the Voce woofer platform by adding a 25mm (1\") Tetolon dome tweeter, designed to work in close synergy with Audison amplifier technology. If you're looking for a coaxial alternative at a lower power rating, the \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003eAudison Prima APX 6.5\u003c\/a\u003e is also worth considering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAerodynamic basket spoke profile and open-air design reduce back-wave reflections.\u003c\/li\u003e\n\u003cli\u003eButyl rubber Triple Wave surround delivers full linearity and reliable performance under extreme conditions.\u003c\/li\u003e\n\u003cli\u003e30mm CCAW voice coil wound on a double layer provides high efficiency and dynamic sound.\u003c\/li\u003e\n\u003cli\u003eRadial Venting System ensures high thermal capability, power handling and reliability.\u003c\/li\u003e\n\u003cli\u003eCotton-fibre pressed paper cone with Light Damping treatment.\u003c\/li\u003e\n\u003cli\u003eOrientable High Frequency Tuning: adjustable tweeter angle for optimised high-range dispersion at the listening point.\u003c\/li\u003e\n\u003cli\u003eTetolon dome neodymium tweeter.\u003c\/li\u003e\n\u003cli\u003eOn-wire dedicated crossover network supplied with the speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe on-wire crossover is included in the box and is dedicated to the AV X6.5, ensuring optimal performance at the crossover frequency. The tweeter's Orientable High Frequency Tuning allows you to angle it towards the listening position for the best possible stereo imaging.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712758079754,"sku":"90259","price":249.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-voce-av-x6-5-6-5-16-5cm-car-coaxial-midbass-door-speakers-100w-rms-pair-47165806346506.jpg?v=1748431952"},{"product_id":"audison-prima-ap-1-tweeter-1-26mm-dome-tetolon-fibre-neodymium-magnet-150w-peak","title":"Audison Prima AP 1 Tweeter 1\" 26mm Dome Tetolon Fibre Neodymium Magnet 150w Peak","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima AP 1 is a 1\" (26 mm) Tetolon fibre dome tweeter from the Audison Prima range, with a neodymium magnet, 150 W peak power handling and 4 ohm impedance. It is supplied with the dedicated APCX TW passive crossover and a full set of mounting accessories for OEM integration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/audison-prima-ap-6-5-2-ohm-6-5-17cm-car-midbass-woofer-door-speakers-70w-rms\"\u003eAudison Prima AP 6.5 midbass woofer\u003c\/a\u003e is a natural partner for the AP 1 in a component speaker installation.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 26 mm (1\")\u003c\/li\u003e\n\u003cli\u003eDome material: Tetolon fibre\u003c\/li\u003e\n\u003cli\u003eMagnet: Neodymium\u003c\/li\u003e\n\u003cli\u003ePower handling: 150 W peak (hi-pass filtered at 3.5 kHz, 12 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 2 kHz to 20 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 20 mm (CCAW, ferrofluid-cooled, Kapton former)\u003c\/li\u003e\n\u003cli\u003eCrossover: APCX TW passive crossover included, with 0 dB \/ +2 dB attenuation switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for enthusiasts who want accurate sound reproduction from components that integrate cleanly with a car's OEM system without compromising on space.\u003c\/p\u003e\n\u003cp\u003eThe AP 1 uses a 26 mm diaphragm with a wide-roll surround that increases sound pressure, lowers resonance frequency and keeps moving mass to a minimum. The dome profile and motor are optimised using FEM (Finite Element Method) simulation technology and developed with the KLIPPEL suite.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e26 mm diaphragm with wide-roll surround for maximum efficiency and reduced resonance frequency.\u003c\/li\u003e\n\u003cli\u003eAcoustic lens compensates for frequency response anomalies in the 10 kHz to 13 kHz bandwidth caused by restrictive OEM grilles in critical placements.\u003c\/li\u003e\n\u003cli\u003eCompact dedicated passive crossover APCX TW included, with attenuation switch (0 dB \/ +2 dB) to tune in-car response to different installation conditions.\u003c\/li\u003e\n\u003cli\u003eCrossover supplied with OEM Integration compliant fast-on connectors — each pole has a different connector end to prevent wiring errors and speed up installation.\u003c\/li\u003e\n\u003cli\u003eWide array of mounting accessories included for flexible fitment in OEM positions.\u003c\/li\u003e\n\u003cli\u003eCCAW (copper clad aluminium wire) ultra-light ferrofluid-cooled voice coil wound on a Kapton former for improved heat dissipation.\u003c\/li\u003e\n\u003cli\u003eLarge neodymium magnet motor.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712768729354,"sku":"90180","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-tweeters-audison-prima-ap-1-tweeter-1-26mm-dome-teloton-fibre-neodymium-magnet-150w-peak-47165823058186.jpg?v=1748431902"},{"product_id":"audison-prima-ap-4-4-10cm-100mm-car-midrange-dash-door-speakers-40w-rms-pair","title":"Audison Prima AP 4 4\" 10cm 100mm Car Midrange Dash Door Speakers 40w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima AP 4 is a pair of 4\" (100mm) car midrange speakers rated at 40W RMS \/ 120W peak, with 4 ohm impedance and an 80Hz–7.5kHz frequency response. Part of the Audison Prima range, they are designed for OEM dash and door integration with an 85mm mounting depth and no passive crossover required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 100mm (4\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 40W continuous, 120W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 80Hz to 7.5kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 25mm pure copper\u003c\/li\u003e\n\u003cli\u003eMounting depth: 85mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.4kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want to hear all the detail in their music through components that integrate cleanly with OEM systems. The priority throughout the range is space-efficient fitment without compromising sound quality.\u003c\/p\u003e\n\u003cp\u003eThe AP 4 delivers an extended frequency response at both ends of its range, combined with high efficiency. The 25mm pure copper voice coil helps maintain balance in the mid-high frequency range. If you need a larger OEM-fit option, the Prima range also includes the \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003eAudison Prima APX 6.5 coaxial midbass speaker\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtended frequency response across both high and low frequencies, with high efficiency.\u003c\/li\u003e\n\u003cli\u003eNo passive crossover required — the cone is optimised using the Klippel Scan Vibrometer to achieve a calibrated mechanical low-pass cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and refined with the Klippel R\u0026amp;D Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eReduced 85mm mounting depth for straightforward fitting in OEM locations.\u003c\/li\u003e\n\u003cli\u003eTPU (Thermoplastic Polyurethane) surround with an exclusive shallow Triple Wave profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003e25mm pure copper voice coil for precise balance in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003eCompact basket with an abrasion-resistant, scratch-proof coating.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the full Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712769515786,"sku":"90187","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-ap-4-4-10cm-100mm-car-midrange-dash-door-speakers-40w-rms-pair-47165824073994.jpg?v=1748431886"},{"product_id":"audison-prima-ap-5-5-13cm-130mm-car-midrange-dash-door-speakers-50w-rms-pair","title":"Audison Prima AP 5 5\" 13cm 130mm Car Woofer Dash Door Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima AP 5 is a 5\" (130 mm) car woofer rated at 50 W RMS \/ 150 W peak, with 4 ohm impedance. It's part of Audison's Prima range, designed for OEM dash and door installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the AP 5 (5\"). The Audison Prima woofer range is also available in \u003ca href=\"\/products\/audison-prima-ap-4-4-10cm-100mm-car-midrange-dash-door-speakers-40w-rms-pair\"\u003e4\" (AP 4, 40 W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 130 mm (5\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 50 W RMS, 150 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 70 Hz – 5 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 32 mm pure copper\u003c\/li\u003e\n\u003cli\u003eCone: Water-repellent treated paper\u003c\/li\u003e\n\u003cli\u003eFs: 90 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is built for enthusiasts who want accurate sound reproduction with components that integrate cleanly into a car's OEM system. The range prioritises OEM space constraints throughout.\u003c\/p\u003e\n\u003cp\u003eThe AP 5 uses a 32 mm pure copper voice coil for high power handling and low-frequency control. No passive crossover is needed — the cone profile has been optimised using the Klippel Scan Vibrometer to achieve a calibrated mechanical low-pass cut-off frequency, maximising efficiency.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 mm pure copper voice coil for high power handling and low-frequency control.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, developed using FEM (Finite Element Method) simulation and optimised with the Klippel R\u0026amp;D Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eNo passive crossover required — cone profile provides a calibrated mechanical low-pass cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eReduced mounting depth for straightforward OEM dash and door installation.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) surround with \"triple wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating; motor secured with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on positive and negative poles for flexible, quick connection.\u003c\/li\u003e\n\u003cli\u003eTemperature-resistant plastic terminal cover protects against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712769810698,"sku":"90188","price":104.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-ap-5-5-13cm-130mm-car-midrange-dash-door-speakers-50w-rms-pair-47165825745162.jpg?v=1748431890"},{"product_id":"audison-prima-ap-6-5-2-ohm-6-5-17cm-car-midbass-woofer-door-speakers-70w-rms","title":"Audison Prima AP 6.5 2 ohm 6.5\" 17cm Car Midbass Woofer Door Speakers 70w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima AP 6.5 2 ohm is a 6.5\" (165 mm) midbass woofer from the Audison Prima range, rated at 70 W RMS and 210 W peak with a 2 ohm impedance — engineered specifically to pair with the Audison AP8.9 bit amplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 2 ohm version. The AP 6.5 is also available as a 4 ohm woofer. If you need a full component kit, the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAudison Prima APK 165P\u003c\/a\u003e is a 2-way 6.5\" component set from the same Prima range, or the \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003eAudison Prima APX 6.5\u003c\/a\u003e offers a coaxial option at the same size and power rating.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165 mm (6.5\")\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003ePower handling: 70 W RMS continuous, 210 W peak\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz – 5 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity (SPL): 95 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil diameter: 25 mm\u003c\/li\u003e\n\u003cli\u003eVoice coil winding height: 10 mm\u003c\/li\u003e\n\u003cli\u003eXmax: 2.8 mm\u003c\/li\u003e\n\u003cli\u003eResonance frequency (Fs): 75 Hz\u003c\/li\u003e\n\u003cli\u003eWeight: 0.78 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want to retain OEM integration while improving sound quality. The focus is on components that fit existing door locations without compromise on space or finish.\u003c\/p\u003e\n\u003cp\u003eThe AP 6.5 2 ohm has been developed specifically to exploit the full 65 W per channel at 2 ohm available from the AP8.9 bit amplifier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 ohm impedance, matched to the 65 W per channel at 2 ohm output of the AP8.9 bit amplifier.\u003c\/li\u003e\n\u003cli\u003e75 Hz resonance frequency, extending usable bass output down to 50 Hz without a subwoofer.\u003c\/li\u003e\n\u003cli\u003e25 mm voice coil with 10 mm winding height, maximising efficiency at 95 dB and linear excursion up to 2.8 mm.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, profiled using FEM simulation and validated with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eTPU (Thermoplastic Polyurethane) surround with exclusive \"Triple Wave\" shallow profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eReduced mounting depth for straightforward installation in OEM door locations.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating and damping epoxy coupling to the motor system.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminals with double contact on positive and negative poles and a temperature-resistant cover to prevent accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the KLIPPEL suite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe lightweight 25 mm \/ 10 mm coil achieves 95 dB sensitivity while delivering a linear excursion of 2.8 mm — greater than the 4 ohm AP 6.5 variant — keeping distortion low even at high listening levels.\u003c\/p\u003e\n\u003cp\u003eThe 75 Hz resonance frequency extends the woofer's range down to 50 Hz, providing solid low-frequency output in installations where no subwoofer is used.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712770564362,"sku":"90191","price":109.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-subwoofer-audison-prima-ap-6-5-4-ohm-6-5-17cm-car-midbass-woofer-door-speakers-70w-rms-47165825974538.jpg?v=1748430641"},{"product_id":"audison-prima-ap-8-8-20cm-car-midbass-woofer-door-speakers-100w-rms-pair","title":"Audison Prima AP 8 8\" 20cm Car Midbass Woofer Door Speakers 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima AP 8 is an 8\" (200mm) midbass woofer supplied as a pair, handling 100W RMS (300W peak) at 4 ohms. Part of the Audison Prima range, it is designed as a direct OEM replacement for vehicles already equipped with an 8\" woofer, delivering extended low-frequency output where a subwoofer cannot fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the AP 8. The Audison Prima midbass woofer range is also available as the \u003ca href=\"\/products\/audison-prima-ap-6-5-2-ohm-6-5-17cm-car-midbass-woofer-door-speakers-70w-rms\"\u003eAP 6.5 6.5\" 70W RMS\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 200mm (8\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W RMS continuous, 300W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 35Hz–3kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93.5dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 25mm\u003c\/li\u003e\n\u003cli\u003eFs: 60Hz, Vas: 20 litres, Xmax: 3.3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.2kg\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, grille included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePrima AP 8: woofer, 300W peak power, 200mm, 4 ohm\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for enthusiasts who want OEM-grade integration without sacrificing space. The AP 8 suits vehicles equipped with an 8\" woofer as a standard OEM component, and its wide emission surface delivers extra low-frequency energy where a subwoofer simply will not fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor vehicles equipped with an 8\" woofer as a standard OEM component.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone with a profile developed using FEM (Finite Element Method) simulation and optimised with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eNo passive crossover required: dome profile optimised with the Klippel R\u0026amp;D Scan Vibrometer to achieve a calibrated mechanical low-pass cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eReduced mounting depth for straightforward installation in OEM positions.\u003c\/li\u003e\n\u003cli\u003eTPU (Thermoplastic Polyurethane) surround with exclusive shallow \"Triple Wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating; motor fixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on positive and negative poles for flexibility and quick connection.\u003c\/li\u003e\n\u003cli\u003eTemperature-resistant plastic cover on the terminal protects against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the KLIPPEL suite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGrille included.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712772006154,"sku":"90195","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-subwoofer-audison-prima-ap-8-8-20cm-car-midbass-woofer-door-speakers-100w-rms-pair-47165828169994.jpg?v=1748431888"},{"product_id":"audison-prima-apx-4-4-10cm-100mm-car-coaxial-dash-door-speakers-40w-rms-pair","title":"Audison Prima APX 4 4\" 10cm 100mm Car Coaxial Dash Door Speakers 40w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APX 4 is a pair of 4\" (100mm) coaxial car speakers rated at 40W RMS \/ 120W peak, 4 ohms. Part of the Audison Prima range, they are designed for OEM integration in dash and door locations where mounting depth is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the APX 4 (4\" coaxial). The Audison Prima coaxial range is also available as the \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003eAPX 6.5 (6.5\" coaxial, 70W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 100mm (4\") coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 40W RMS continuous, 120W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 80Hz – 23kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91dB\u003c\/li\u003e\n\u003cli\u003eTweeter: 24mm concentric, 15mm voice coil\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 32mm pure copper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePrima APX 4: coaxial, 120W peak power, 100mm, 4 ohm\u003c\/h2\u003e\n\n\u003ch3\u003eAudison Prima\u003c\/h3\u003e\n\u003cp\u003eAudison Prima is designed for enthusiasts who want to appreciate every nuance of their music, with components that integrate cleanly into an OEM system without sacrificing space. If you need a non-coaxial option, the \u003ca href=\"\/products\/audison-prima-ap-4-4-10cm-100mm-car-midrange-dash-door-speakers-40w-rms-pair\"\u003eAudison Prima AP 4\u003c\/a\u003e is the midrange-only version in the same 4\" (100mm) size.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcentric coaxial tweeter: mounted within the woofer for a single point of sound emission, delivering consistent phase response and a soundstage comparable to a component system.\u003c\/li\u003e\n\u003cli\u003eAcoustic lens on the tweeter ensures a linear frequency response even in off-axis placement, typical of in-door installations.\u003c\/li\u003e\n\u003cli\u003e32mm pure copper voice coil for high power handling and strong low-frequency control.\u003c\/li\u003e\n\u003cli\u003eLow profile basket and concentric tweeter keep overall mounting depth to a minimum for OEM integration.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone with a profile developed using FEM (Finite Element Method) simulation and optimised with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) suspension with a \"triple wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratchproof coating; motor fixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on both positive and negative poles; temperature-resistant plastic cover guards against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the KLIPPEL suite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe APX 4's concentric coaxial tweeter produces a single point of sound emission for a consistent in-phase response, with acoustic reconstruction comparable to a separate woofer and tweeter setup. The 4\" cone surround uses the exclusive shallow Triple Wave profile for maximum excursion linearity.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712772399370,"sku":"90226","price":109.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apx-4-4-10cm-100mm-car-coaxial-dash-door-speakers-40w-rms-pair-47165829185802.jpg?v=1748431886"},{"product_id":"audison-prima-apx-5-5-13cm-130mm-car-coaxial-dash-door-speakers-50w-rms-pair","title":"Audison Prima APX 5 5\" 13cm 130mm Car Coaxial Dash Door Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APX 5 is a pair of 5\" (130mm) 4-ohm coaxial car speakers rated at 50W RMS and 150W peak, from Audison's Prima range. The concentric tweeter and low-profile basket are designed for OEM dash and door fitments where mounting depth is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the APX 5. The Audison Prima coaxial range is also available in \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003eAPX 6.5 (6.5\" \/ 70W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 130mm (5\") coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 50W RMS, 150W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 70 Hz – 23 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB\u003c\/li\u003e\n\u003cli\u003eTweeter: 24mm concentric with acoustic lens\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 32mm pure copper\u003c\/li\u003e\n\u003cli\u003eWoofer cone: water-repellent treated paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for enthusiasts who want OEM integration without sacrificing sound quality. The range prioritises compact dimensions so components fit standard dash and door locations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcentric coaxial tweeter mounted within the woofer gives a single point of emission, delivering consistent phase response and a soundstage comparable to a component system.\u003c\/li\u003e\n\u003cli\u003eAcoustic lens on the tweeter ensures a linear frequency response even in off-axis placements typical of in-door installations.\u003c\/li\u003e\n\u003cli\u003e32mm pure copper voice coil for high power handling and strong low-frequency control.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth achieved through the concentric tweeter design and low-profile basket — optimised for OEM integration.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and validated with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) suspension with a \"triple wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating; motor fixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on both positive and negative poles for quick, flexible connection.\u003c\/li\u003e\n\u003cli\u003eTemperature-resistant plastic cover on the terminal protects against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe APX 5's concentric tweeter produces a single point of sound emission, giving a coherent in-phase response and an acoustic presentation comparable to a separate woofer-and-tweeter setup. The 5\" cone surround uses the exclusive shallow Triple Wave profile for maximum excursion linearity. If you need a larger coaxial option, see the \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003eAudison Prima APX 6.5\u003c\/a\u003e.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712773218570,"sku":"90227","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apx-5-5-13cm-130mm-car-coaxial-dash-door-speakers-50w-rms-pair-47165829513482.jpg?v=1748431901"},{"product_id":"audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair","title":"Audison Prima APX 6.5 6.5\" 17cm Car Coaxial Midbass Door Speakers 70w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APX 6.5 is a 6.5\" (165 mm) 2-way coaxial car speaker pair from Audison's Prima range, rated at 70W RMS \/ 210W peak at 4 ohms, with a concentric 24 mm tweeter mounted for component-style sound staging in an OEM-friendly shallow fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 2-way coaxial with concentric tweeter (pair)\u003c\/li\u003e\n\u003cli\u003eWoofer size: 165 mm (6.5\")\u003c\/li\u003e\n\u003cli\u003eTweeter size: 24 mm\u003c\/li\u003e\n\u003cli\u003ePower handling: 70W RMS, 210W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz – 23 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 32 mm pure copper\u003c\/li\u003e\n\u003cli\u003eTweeter SPL: 94 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for enthusiasts who want accurate, nuanced sound with components that integrate cleanly into OEM systems without sacrificing space.\u003c\/p\u003e\n\u003cp\u003eThe APX 6.5's concentric tweeter sits within the woofer cone at a single point of emission, delivering consistent phase response and a sound stage comparable to a separate component setup. If you prefer a dedicated woofer-only solution, the \u003ca href=\"\/products\/audison-prima-ap-6-5-2-ohm-6-5-17cm-car-midbass-woofer-door-speakers-70w-rms\"\u003eAudison Prima AP 6.5\u003c\/a\u003e is available as a standalone midbass driver in 2 ohm.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcentric tweeter features an acoustic lens for linear frequency response, even in off-axis in-door positions.\u003c\/li\u003e\n\u003cli\u003e32 mm pure copper voice coil for high power handling and low-frequency control.\u003c\/li\u003e\n\u003cli\u003eShallow mounting depth optimised for OEM integration via the concentric tweeter and low-profile basket.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and validated with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) suspension with exclusive \"triple wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating; motor fixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on positive and negative poles for quick, flexible connection.\u003c\/li\u003e\n\u003cli\u003eTemperature-resistant plastic cover on the terminal protects against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712774496522,"sku":"90229","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair-47165831905546.jpg?v=1748431890"},{"product_id":"audison-prima-apx-570-5x7-570mm-car-coaxial-shelf-door-speakers-70w-rms-pair","title":"Audison Prima APX 570 5x7\" Car Coaxial Shelf Door Speakers 70w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APX 570 is a pair of 5×7-inch 2-way coaxial speakers from the Audison Prima range, rated at 70W RMS (210W peak). They feature a 24mm concentric tweeter and are designed as a direct OEM drop-in replacement for factory 5×7-inch door or shelf speaker locations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 5×7-inch coaxial. The Audison Prima coaxial range is also available in \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003e6.5-inch (APX 6.5)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5×7-inch elliptical coaxial\u003c\/li\u003e\n\u003cli\u003eTweeter: 24mm concentric with acoustic lens, 15mm voice coil\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 32mm copper\u003c\/li\u003e\n\u003cli\u003ePower: 70W continuous \/ 210W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60Hz–23kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePrima APX 570: Coaxial, 210W Peak Power, 5″ x 7″, 4 ohm\u003c\/h2\u003e\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want to hear every nuance of their music from components that integrate perfectly with the factory (OEM) system, while respecting the most critical OEM requirement: space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcentric coaxial tweeter is mounted within the woofer at a single point of emission, providing consistent phase response for accurate sound stage recreation.\u003c\/li\u003e\n\u003cli\u003eAcoustic lens on the tweeter ensures a highly linear frequency response even in off-axis placement, typical of in-door installations.\u003c\/li\u003e\n\u003cli\u003e32mm pure copper voice coil for high power handling and strong low-frequency control.\u003c\/li\u003e\n\u003cli\u003eOverall mounting depth optimised for OEM integration via the concentric tweeter and low-profile basket.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation technology and optimised with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) surround with a \"triple wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating; motor fixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on positive and negative poles for quick connection, plus a temperature-resistant plastic cover to prevent accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe APX 570's concentric coaxial tweeter delivers a single point of sound emission for consistent in-phase response and accurate acoustic scene reconstruction. The 5×7-inch cone surround uses an exclusive shallow triple wave profile for maximum excursion linearity.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712775348490,"sku":"90228","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apx-570-5x7-570mm-car-coaxial-shelf-door-speakers-70w-rms-pair-47165833150730.jpg?v=1748431888"},{"product_id":"audison-prima-apx-690-6x9-car-coaxial-midbass-shelf-door-speakers-100w-rms-pair","title":"Audison Prima APX 690 6x9\" Car Coaxial Midbass Shelf Door Speakers 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APX 690 is a pair of 6x9-inch coaxial speakers from the Audison Prima range, rated at 100W RMS (300W peak) with 96dB sensitivity. They feature a 40mm horn-loaded dome tweeter with acoustic lens and a 15mm PEI super tweeter, and are designed to upgrade factory 6x9-inch rear shelf or door speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 6x9-inch coaxial. The Audison Prima coaxial range is also available in \u003ca href=\"\/products\/audison-prima-apx-6-5-6-5-17cm-car-coaxial-midbass-door-speakers-70w-rms-pair\"\u003e6.5-inch (APX 6.5)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eFor a 6x9-inch component set with separate tweeters, see the \u003ca href=\"\/products\/audison-prima-apk-690-6x9-2-way-car-component-door-speakers-100w-rms-pair\"\u003eAudison Prima APK 690\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 inch elliptical coaxial\u003c\/li\u003e\n\u003cli\u003eTweeter: 40mm horn-loaded dome with acoustic lens\u003c\/li\u003e\n\u003cli\u003eSuper tweeter: 15mm PEI\u003c\/li\u003e\n\u003cli\u003ePower: 100W continuous \/ 300W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40Hz–23kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 96dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePrima APX 690: Coaxial, 300W Peak Power, 6″ x 9″, 4 ohm\u003c\/h2\u003e\n\u003cp\u003eThe APX 690 features a 40mm horn-loaded dome tweeter for efficiency up to 96dB SPL, plus an acoustic lens designed to increase high-frequency dispersion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e40mm horn-loaded dome tweeter delivering up to 96dB SPL sensitivity.\u003c\/li\u003e\n\u003cli\u003eAcoustic lens on the tweeter to increase dispersion in the high-frequency range.\u003c\/li\u003e\n\u003cli\u003e15mm PEI (polyethylene injected) super tweeter strengthens very high-frequency emission, particularly useful for rear deck installations where off-axis positioning is common.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and optimised with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil wound on a Kapton former for improved thermal and mechanical capacity.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) surround with a \"triple wave\" profile for maximum linearity of excursion.\u003c\/li\u003e\n\u003cli\u003ePolycotton spider for reliable performance and linear response to musical transients.\u003c\/li\u003e\n\u003cli\u003eLarge motor assembly optimised with FEM technology for stable control and linear excursion.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating; motor affixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminals with temperature-resistant plastic covers to guard against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712775938314,"sku":"90230","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apx-690-6x9-car-coaxial-midbass-shelf-door-speakers-100w-rms-pair-47165834068234.jpg?v=1748431883"},{"product_id":"audison-prima-apk-130-5-13cm-130mm-2-way-car-component-door-speakers-75w-rms","title":"Audison Prima APK 130 5\" 13cm 130mm 2 Way Car Component Door Speakers 75w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APK 130 is a 5\" (130mm) 2-way component speaker kit comprising AP 5 woofers, AP 1 tweeters and APCX TW passive crossovers, rated at 75W RMS (225W peak). It is part of the Audison Prima range, designed for straightforward OEM integration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 5\" \/ 130mm kit. The Audison Prima component speaker range is also available as the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAPK 165P in 6.5\" \/ 165mm\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eProtective grilles for the woofers are available separately as the \u003ca href=\"\/products\/audison-prima-apg-5-5-25-13cm-speaker-grills-for-prima-ap-5-apx-5-apk-130\"\u003eAudison Prima APG 5\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer: AP 5, 130mm (5\"), 32mm copper voice coil\u003c\/li\u003e\n\u003cli\u003eTweeter: AP 1, 26mm with acoustic lens\u003c\/li\u003e\n\u003cli\u003ePower handling: 75W RMS continuous \/ 225W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 70Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eWoofer sensitivity: 93dB\u003c\/li\u003e\n\u003cli\u003eCrossover: APCX TW, high-pass at 3.5kHz, 6dB\/octave\u003c\/li\u003e\n\u003cli\u003eTweeter level: 0dB or +2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want to hear every nuance of their music through components that integrate cleanly with factory (OEM) systems, without compromising on space.\u003c\/p\u003e\n\u003cp\u003eThe APK 130 pairs the AP 1 tweeter with the AP 5 woofer. The APCX TW crossover includes a two-position level selector: +2dB when installed behind an OEM grille, or 0dB for an A-pillar installation with no grille between tweeter and listener.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1 tweeter with 26mm diaphragm and wide-roll surround for high efficiency and reduced resonance frequency.\u003c\/li\u003e\n\u003cli\u003eAP 1 tweeter with acoustic lens to compensate for in-car frequency response anomalies in the 10kHz–13kHz bandwidth caused by restrictive OEM grilles.\u003c\/li\u003e\n\u003cli\u003eAPCX TW compact passive crossover optimised for OEM integration, with 0dB\/+2dB attenuation switch.\u003c\/li\u003e\n\u003cli\u003ePassive crossovers supplied with OEM-compliant fast-on connectors — different ends on each pole to eliminate connection errors and speed up installation.\u003c\/li\u003e\n\u003cli\u003eAP 5 woofer with 32mm pure copper voice coil for high power handling and low-frequency control.\u003c\/li\u003e\n\u003cli\u003eAP 5 woofer with water-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and optimised with the Klippel R\u0026amp;D Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eAP 5 woofer with reduced mounting depth for easy fitment in OEM positions.\u003c\/li\u003e\n\u003cli\u003eAP 5 woofer with TPU (Thermoplastic Polyurethane) surround featuring the exclusive shallow Triple Wave profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eAP 5 woofer with abrasion-resistant, scratch-proof basket coating and motor secured with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eAP 5 woofer with high-current fast-on terminals, double contact on positive and negative poles, and a temperature-resistant cover to prevent accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712777019658,"sku":"90215","price":219.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apk-130-5-13cm-130mm-2-way-car-component-door-speakers-75w-rms-47165835673866.jpg?v=1748431885"},{"product_id":"audison-prima-apk-165-4-ohms-6-5-17cm-2-way-car-component-door-speakers-100w","title":"Audison Prima APK 165 4 ohms 6.5\" 17cm 2 Way Car Component Door Speakers 100w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APK 165 is a 4-ohm 6.5\" (165 mm) 2-way component speaker kit rated at 100 W RMS \/ 300 W peak. It includes the AP 1 tweeter, AP 6.5 woofer, and APCX TW passive crossover, and is part of the Audison Prima range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the APK 165 (4 ohm). The Audison Prima component speaker range is also available as the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAPK 165P (115 W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer size: 165 mm (6.5 in)\u003c\/li\u003e\n\u003cli\u003eTweeter size: 26 mm\u003c\/li\u003e\n\u003cli\u003ePower handling: 100 W RMS \/ 300 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer SPL: 93.5 dB\u003c\/li\u003e\n\u003cli\u003eCrossover: APCX TW, tweeter level +2 \/ 0 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want to hear all the nuances of their music whilst integrating cleanly with OEM systems. Space is a priority — every component is engineered to fit where factory speakers once sat.\u003c\/p\u003e\n\u003cp\u003eThe two-way system pairs the AP 1 tweeter with the \u003ca href=\"\/products\/audison-prima-ap-6-5-2-ohm-6-5-17cm-car-midbass-woofer-door-speakers-70w-rms\"\u003eAP 6.5 woofer\u003c\/a\u003e and the APCX TW crossover. The crossover's two-position level selector gives +2 dB when installed behind an OEM grille, or 0 dB for A-pillar mounting without a grille between tweeter and listener.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAP 1 tweeter with 26 mm diaphragm and wide-roll surround for maximum efficiency and reduced resonance frequency\u003c\/li\u003e\n\u003cli\u003eAP 1 tweeter acoustic lens compensates for in-car frequency anomalies in the 10 kHz to 13 kHz band caused by restrictive OEM grilles\u003c\/li\u003e\n\u003cli\u003eAPCX TW compact passive crossover optimised for OEM integration, with attenuation switch (0 dB \/ +2 dB) for different installation conditions\u003c\/li\u003e\n\u003cli\u003eFast-on connectors with differing ends on each pole to eliminate wiring errors and speed up installation\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer with 32 mm pure copper voice coil for high power handling and low-frequency control\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer with water-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and optimised with the Klippel Scan Vibrometer\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer with reduced mounting depth for straightforward installation in OEM locations\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer with TPU (thermoplastic polyurethane) surround featuring a \"triple wave\" profile for maximum linearity of excursion\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer basket with abrasion-resistant, scratch-proof coating and motor fixed using damping epoxy adhesive\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer with high-current fast-on terminal, double contact on positive and negative poles, and temperature-resistant plastic cover to protect against accidental short circuits\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712778395914,"sku":"90218","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apk-165-4-ohms-6-5-17cm-2-way-car-component-door-speakers-100w-47165838131466.jpg?v=1748431872"},{"product_id":"audison-prima-apk-165-2-ohms-6-5-17cm-2-way-car-component-door-speakers-100w","title":"Audison Prima APK 165 2 ohms 6.5\" 16.5cm 2 Way Car Component Door Speakers 100w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APK 165 2 ohm is a 6.5\" (165mm) 2-way component speaker kit from the Audison Prima range, rated at 100W continuous \/ 300W peak with a 2 ohm impedance. The kit includes AP 6.5 2 ohm woofers, AP 1 tweeters, and separate APCX WF 2 ohm and APCX TW 2 ohm crossovers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the APK 165 2 ohm. The Audison Prima component speaker range is also available as the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAPK 165P\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer: AP 6.5 2 ohm, 165mm, 25mm voice coil\u003c\/li\u003e\n\u003cli\u003eTweeter: AP 1, 26mm with acoustic lens\u003c\/li\u003e\n\u003cli\u003ePower: 100W continuous \/ 300W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossovers: APCX WF 2 ohm and APCX TW 2 ohm, cut-off 4.5\/5kHz\u003c\/li\u003e\n\u003cli\u003eTweeter level: 0dB or +2dB\u003c\/li\u003e\n\u003cli\u003eWoofer sensitivity: 95dB, Xmax 2.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eProtective grilles for the woofers are available separately as the \u003ca href=\"\/products\/audison-prima-apg-6-5-16-5cm-speaker-grills-for-prima-ap-6-5-apx-6-5-apk-165\"\u003eAudison Prima APG 6.5\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for enthusiasts who want OEM system integration without sacrificing sound quality or space. The APK 165 2 ohm features separate crossovers for the woofer and tweeter to simplify installation.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e2 ohm impedance, designed to fully exploit the 65W per channel at 2 ohm of the AP8.9-bit amplifier.\u003c\/li\u003e\n\u003cli\u003e75Hz resonance frequency, extending the frequency range down to 50Hz and increasing SPL in the low range.\u003c\/li\u003e\n\u003cli\u003e25mm voice coil maximising efficiency at 95dB.\u003c\/li\u003e\n\u003cli\u003e10mm winding height voice coil for maximum linear excursion up to 2.8mm and minimal distortion at high listening levels.\u003c\/li\u003e\n\u003cli\u003eAPCX WF 2 ohm dedicated woofer crossover with low-loss voice coils, shaping the frequency response for an optimal match with the tweeter.\u003c\/li\u003e\n\u003cli\u003eAPCX TW 2 ohm tweeter crossover with Hi-Contour function to enhance high frequencies and achieve the correct timbre balance with the woofer's low-frequency output.\u003c\/li\u003e\n\u003cli\u003eAP 1 tweeter with acoustic lens, balancing frequency response in the 10kHz–13kHz range and optimising acoustic emission in OEM placements where a factory grille is present.\u003c\/li\u003e\n\u003cli\u003eConnection cable integrated into the passive crossover, terminated with fast-on connectors. Differently shaped terminations at each pole prevent incorrect connections and speed up installation.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 2 ohm woofer with water-repellent treated paper cone, developed using FEM simulation technology and optimised with Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eReduced mounting depth for ease of installation in OEM placements.\u003c\/li\u003e\n\u003cli\u003eTPU (thermoplastic polyurethane) surround with \"triple wave\" profile for maximum excursion linearity.\u003c\/li\u003e\n\u003cli\u003eCompact basket with abrasion-resistant, scratch-proof coating and damping epoxy glue for coupling with the motor system.\u003c\/li\u003e\n\u003cli\u003eHigh-current fast-on terminal with double contact on positive and negative poles and a temperature-resistant plastic cover to protect against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the KLIPPEL suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712779936010,"sku":"90217","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apk-165-2-ohms-6-5-17cm-2-way-car-component-door-speakers-100w-47165839671562.jpg?v=1748431865"},{"product_id":"audison-prima-apk-163-6-5-woofer-4-mid-1-tweeter-component-speakers-125w-rms","title":"Audison Prima APK 163 6.5\" Woofer 4\" Mid 1\" Tweeter Component Speakers 125w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APK 163 is a 3-way component speaker kit from the Audison Prima range, comprising a 6.5\" (165mm) woofer, 4\" midbass and 1\" tweeter, rated at 125W RMS \/ 375W peak at 4 ohms.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the APK 163 3-way kit. The Audison Prima component speaker range is also available as the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAPK 165P 2-way component kit\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration: 3-way component kit (AP 1 tweeter + AP 4 midbass + AP 6.5 woofer)\u003c\/li\u003e\n\u003cli\u003eWoofer: 165mm, 32mm copper voice coil\u003c\/li\u003e\n\u003cli\u003eTweeter: 26mm diaphragm\u003c\/li\u003e\n\u003cli\u003ePower handling: 125W continuous, 375W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93.5 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eCrossovers: separate passive crossover per driver; tweeter attenuation switch (0 dB, +2 dB)\u003c\/li\u003e\n\u003cli\u003eIncludes: grilles and crossovers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima APK 163\u003c\/h2\u003e\n\u003ch3\u003e3-way kit | 375W peak power | 4 ohm | AP 1 + AP 4 + AP 6.5 + grilles + crossover\u003c\/h3\u003e\n\n\u003cp\u003eAudison Prima is designed for enthusiasts who want to hear every detail of their music while integrating cleanly into an OEM system. The priority throughout the range is space-efficient OEM replacement.\u003c\/p\u003e\n\n\u003cp\u003eThe APK 163 pairs the AP 1 tweeter, AP 4 midbass and AP 6.5 woofer with a dedicated crossover for each driver. This approach simplifies OEM speaker replacement without routing extra cables through the door — avoiding any risk to the car warranty.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eAP 1 tweeter: 26mm diaphragm with wide-roll surround for high efficiency and reduced resonance frequency.\u003c\/li\u003e\n\u003cli\u003eAP 1 tweeter: acoustic lens compensates for in-car frequency response anomalies in the 10 kHz–13 kHz band caused by restrictive OEM grilles.\u003c\/li\u003e\n\u003cli\u003eAPCX TW compact tweeter passive crossover with attenuation switch (0 dB, +2 dB) to tune in-car response; APCX MD midbass crossover and APCX WF woofer crossover — all optimised for OEM integration.\u003c\/li\u003e\n\u003cli\u003eAP 4 midbass: extended frequency response with high efficiency.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer: 32mm pure copper voice coil for high power handling and low-frequency control.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer and AP 4 midbass: water-repellent treated paper cone, profiled using FEM (Finite Element Method) simulation and optimised with the Klippel R\u0026amp;D Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer and AP 4 midbass: reduced mounting depth for easier fitting in OEM locations.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer and AP 4 midbass: TPU (thermoplastic polyurethane) edge with shallow \"TripleWave\" profile for maximum linearity of excursion.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer and AP 4 midbass: compact basket with abrasion-resistant, scratch-proof coating; motor fixed with damping epoxy adhesive.\u003c\/li\u003e\n\u003cli\u003eAP 6.5 woofer: high-current fast-on terminal with double contact on positive and negative poles; temperature-resistant plastic cover protects against accidental short circuits.\u003c\/li\u003e\n\u003cli\u003eDeveloped using the Klippel suite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712780820746,"sku":"90216","price":329.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apk-163-6-5-woofer-4-mid-1-tweeter-component-speakers-125w-rms-47165842620682.jpg?v=1748431866"},{"product_id":"audison-prima-apbmw-x4e-plug-play-direct-fit-bmw-mini-coaxial-speakers-50w","title":"Audison Prima APBMW X4E Plug \u0026 Play Direct Fit BMW \u0026 Mini Coaxial Speakers 40w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APBMW X4E is a pair of 100mm (4-inch) plug-and-play coaxial speakers designed specifically for BMW and MINI models, rated at 40W continuous \/ 80W peak. They are part of the Audison Prima range and are built for vehicles where a two-way front door system cannot be fitted, or where a rear speaker upgrade is needed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the APBMW X4E. The Audison Prima APBMW X4M is also available — contact CEN with your registration to confirm the correct version for your vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 100mm (4 inch) coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 40W continuous \/ 80W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 100Hz–22kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: 24mm Tetolon dome, 20mm voice coil\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 25mm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 88dB\u003c\/li\u003e\n\u003cli\u003eFitting: BMW-MINI die-cast aluminium basket, fixing screws, plug-and-play connectors, 30cm extension lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want to hear every detail of their music from components that integrate cleanly with the factory (OEM) system — without compromising on space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeveloped for BMW-MINI models that do not allow a two-way system on the front doors, or for rear seat upgrades\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet group for maximum performance with minimal bulk and weight\u003c\/li\u003e\n\u003cli\u003e25mm (1″) glass-fibre woofer voice coil for high power dissipation and stiffness\u003c\/li\u003e\n\u003cli\u003eWaterproof pressed-paper cone for natural mid-range frequencies free from plastic resonance\u003c\/li\u003e\n\u003cli\u003eTetolon dome tweeter with 20mm (0.8″) voice coil — Tetolon offers lightness and damping — with dispersion characteristics optimised via FEM simulations\u003c\/li\u003e\n\u003cli\u003eBMW-MINI compatible aluminium die-cast basket with plug-and-play connectors\u003c\/li\u003e\n\u003cli\u003e30cm extension lead included with plug-and-play connectors for flexible installation\u003c\/li\u003e\n\u003cli\u003eDamping removable motor cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 100mm APBMW X4E uses a basket and fixing screws dedicated to the specific car model. The water-repellent pressed-paper cone delivers natural, colour-free mid-range frequencies, while the Tetolon dome tweeter is optimised for OEM placement to raise the sound stage to a realistic level.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712787210506,"sku":"90205","price":249.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apbmw-x4e-plug-play-direct-fit-bmw-mini-coaxial-speakers-50w-47165850059018.jpg?v=1748431856"},{"product_id":"audison-prima-apbmw-k4e-bmw-mini-plug-play-direct-fit-component-speakers-50w","title":"Audison Prima APBMW K4E BMW \u0026 Mini Plug \u0026 Play Direct Fit Component Speakers 50w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APBMW K4E is a plug-and-play 2-way component speaker kit from the Audison Prima range, designed as a direct-fit upgrade for BMW and MINI models with factory 2-way systems. It pairs a 100mm (4-inch) midrange with a 29mm Tetolon dome tweeter, handling 50W continuous and 100W peak.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFitment: BMW and MINI models with factory 2-way systems\u003c\/li\u003e\n\u003cli\u003eWoofer: 100mm (4in), waterproof pressed-paper cone, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eTweeter: 29mm Tetolon dome, 25mm voice coil\u003c\/li\u003e\n\u003cli\u003ePower handling: 50W continuous, 100W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 90Hz to 23kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: plug and play, tweeter level adjustable (-3 \/ 0dB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima APBMW K4E\u003c\/h2\u003e\n\n\u003cp\u003eDeveloped specifically to upgrade BMW and MINI models fitted with factory 2-way systems, the APBMW K4E slots in using OEM connectors and mountings, keeping installation clean and straightforward.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBMW and MINI compatible aluminium die-cast basket with Plug \u0026amp; Play connectors.\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet group maximises performance while minimising bulk and weight; 25mm (1″) fibreglass woofer voice coil for high power dissipation and stiffness.\u003c\/li\u003e\n\u003cli\u003eWaterproof pressed-paper cone for natural mid frequencies free from plastic resonance.\u003c\/li\u003e\n\u003cli\u003e25mm Tetolon dome tweeter with dispersion characteristics optimised via FEM simulation.\u003c\/li\u003e\n\u003cli\u003eTweeter support supplied for Plug \u0026amp; Play OEM placements.\u003c\/li\u003e\n\u003cli\u003e30cm extension cable with Plug \u0026amp; Play connectors included for installation flexibility.\u003c\/li\u003e\n\u003cli\u003eDamping removable motor cover.\u003c\/li\u003e\n\u003cli\u003eCrossover fitted with high-quality components and Plug \u0026amp; Play connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 100mm midrange uses a water-repellent pressed-paper cone for natural sound reproduction. Its low resonance frequency allows a hi-pass cut-off in the 150–200Hz range, giving solid mid-low reproduction. The 25mm Tetolon dome tweeter extends cleanly across mid and high frequencies and is optimised for off-axis output, creating a wide three-dimensional sound stage in the cabin.\u003c\/p\u003e\n\n\u003cp\u003eIf you are building a more flexible system rather than a direct OEM replacement, the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAudison Prima APK 165P\u003c\/a\u003e is a universal 6.5\" 2-way component set handling 115W RMS.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712788029706,"sku":"90199","price":279.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apbmw-k4e-bmw-mini-plug-play-direct-fit-component-speakers-50w-47165851074826.jpg?v=1748431850"},{"product_id":"audison-prima-apbmw-k4m-bmw-mini-plug-play-direct-fit-component-speakers-50w","title":"Audison Prima APBMW K4M BMW \u0026 Mini Plug \u0026 Play Direct Fit Component Speakers 50w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APBMW K4M is a plug-and-play 2-way component speaker kit for BMW and Mini, pairing a 100 mm (4-inch) midrange with a 29 mm Tetolon dome tweeter, rated at 50W continuous and 100W peak. Part of the Audison Prima range, it is designed to drop directly into factory speaker locations without cutting wires.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 2-way component kit, 4 ohms\u003c\/li\u003e\n\u003cli\u003eVehicles: BMW and Mini (plug and play)\u003c\/li\u003e\n\u003cli\u003eMidrange\/woofer: 100 mm (4 in), water-repellent pressed-paper cone, 25 mm voice coil\u003c\/li\u003e\n\u003cli\u003eTweeter: 29 mm Tetolon dome, 25 mm voice coil\u003c\/li\u003e\n\u003cli\u003ePower handling: 50W continuous, 100W peak\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89 dB\u003c\/li\u003e\n\u003cli\u003eTweeter level adjustment: -3 dB \/ 0 dB\u003c\/li\u003e\n\u003cli\u003eConnections: Plug and Play connectors, 30 cm extension cable included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima — designed for BMW and Mini OEM integration\u003c\/h2\u003e\n\u003cp\u003eAudison Prima was developed for enthusiasts who want to preserve every nuance of the music while fitting components that integrate cleanly with the car's factory system, without sacrificing space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeveloped specifically for upgrading BMW and Mini factory speaker systems\u003c\/li\u003e\n\u003cli\u003eCreates an extended three-dimensional sound stage in the cabin\u003c\/li\u003e\n\u003cli\u003eNeodymium magnetic group maximises performance whilst minimising bulk and weight\u003c\/li\u003e\n\u003cli\u003e25 mm fibreglass woofer voice coil for high power dissipation and stiffness\u003c\/li\u003e\n\u003cli\u003eWater-repellent pressed-paper cone for natural mid frequencies free from plastic resonance\u003c\/li\u003e\n\u003cli\u003eBMW and Mini compatible aluminium die-cast basket with Plug and Play connectors\u003c\/li\u003e\n\u003cli\u003e25 mm Tetolon coil tweeter with dispersion characteristics optimised using FEM simulations\u003c\/li\u003e\n\u003cli\u003eTweeter support supplied for Plug and Play OEM placements\u003c\/li\u003e\n\u003cli\u003e30 cm extension cable with Plug and Play connectors included for installation flexibility\u003c\/li\u003e\n\u003cli\u003eDamping removable motor cover\u003c\/li\u003e\n\u003cli\u003eCrossover equipped with high-quality components and Plug and Play connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMidrange and tweeter performance\u003c\/h2\u003e\n\u003cp\u003eThe 100 mm (4 in) midrange uses a water-repellent pressed-paper cone for natural sound reproduction. Its low resonance frequency allows a hi-pass cut-off in the 150–200 Hz range for excellent mid-low performance.\u003c\/p\u003e\n\u003cp\u003eThe 25 mm Tetolon dome tweeter delivers strong extension across medium and high frequencies and is optimised for off-axis output, helping to create a wide, three-dimensional sound stage. If you are looking for a universal Audison Prima option, the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAudison Prima APK 165P\u003c\/a\u003e is a 6.5-inch 2-way component kit available for general fitment.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712788979978,"sku":"90200","price":279.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-prima-apbmw-k4m-bmw-mini-plug-play-direct-fit-component-speakers-50w-47165853597962.jpg?v=1748431850"},{"product_id":"audison-voce-av-1-1-1-1-8-28mm-silk-cotton-dome-tweeter-180w-peak-power-pair","title":"Audison Voce AV 1.1 1\" 1\/8 28mm Silk \u0026 Cotton Dome Tweeter 180w Peak Power Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Voce AV 1.1 is a pair of 28mm (1-1\/8\") car tweeters featuring a Tetolon silk and cotton dome, CCAW voice coil and neodymium magnet, rated at 180W peak and 4 ohms. Part of the Audison Voce range, they are designed for use in component speaker systems alongside Voce amplifiers and speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the matching Voce midbass woofer, see the \u003ca href=\"\/products\/audison-voce-av-6-5-6-5-16-5cm-car-midbass-woofer-door-speakers-100w-rms-pair\"\u003eAudison Voce AV 6.5\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 28mm (1-1\/8\") dome tweeter — sold as a pair\u003c\/li\u003e\n\u003cli\u003ePower handling: 180W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 1.2kHz – 22kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 92dB\u003c\/li\u003e\n\u003cli\u003eRecommended crossover: hi-pass filtered at 2.0kHz @ 12dB\/oct\u003c\/li\u003e\n\u003cli\u003eDome material: Tetolon (silk and cotton blend)\u003c\/li\u003e\n\u003cli\u003eVoice coil: 28mm CCAW (Copper Clad Aluminium Wire), double-layer wound\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoce AV 1.1\u003c\/h2\u003e\n\u003cp\u003eThe Tetolon dome combines silk and cotton with a proprietary damping treatment, giving low mass and a resonance-free response up to ultrasonic frequencies. The 28mm CCAW voice coil is wound on a double layer for high efficiency and crisp, dynamic sound. A rear damping chamber with annular geometry and proprietary damping material extends low-frequency reach and reduces harmonic distortion. The high-flux-density neodymium magnet contributes further to efficiency and sonic detail.\u003c\/p\u003e\n\u003ch2\u003eVoce range\u003c\/h2\u003e\n\u003cp\u003eAudison's Voce range is built around the synergy between its speakers and amplifier technology. The AV 1.1 pairs the lightweight Tetolon membrane, double-layer CCAW voice coil and neodymium magnet with precision rear-chamber engineering to deliver a natural, detailed sound with reduced harmonic distortion.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712791503114,"sku":"90254","price":159.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-tweeters-audison-voce-av-1-1-1-1-8-28mm-silk-cotton-dome-tweeter-180w-peak-power-pair-47165857333514.jpg?v=1748431851"},{"product_id":"audison-voce-av-3-0-3-7cm-70mm-dash-door-midrange-speaker-with-grills-100w-pair","title":"Audison Voce AV 3.0 3\" 7cm 70mm Dash Door Midrange Speaker with Grills 100w Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Voce AV 3.0 is a pair of 3\" (70mm) neodymium midrange speakers rated at 100W peak, 4 ohm, from the Audison Voce range. Grilles are included, suitable for dash or door installations in high-end car audio systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Midrange speaker, sold as a pair\u003c\/li\u003e\n\u003cli\u003eSize: 70mm (3\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 200 Hz – 14 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity (SPL): 93 dB\u003c\/li\u003e\n\u003cli\u003eMagnet: Neodymium\u003c\/li\u003e\n\u003cli\u003eVoice coil: 20mm CCAW (Copper Clad Aluminium Wire), double layer wound\u003c\/li\u003e\n\u003cli\u003eGrilles: Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Voce AV 3.0\u003c\/h2\u003e\n\u003cp\u003eThe Voce range pairs with Audison amplifier technology to raise the standard of in-car audio reproduction. The AV 3.0 centres on a compact yet powerful neodymium magnetic group, delivering efficient, linear midrange performance across versatile installation positions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAerodynamic basket spoke profile and open-air design dramatically reduce back-wave reflections.\u003c\/li\u003e\n\u003cli\u003eExclusive Triple Wave surround profile provides full linearity and reliable performance under extreme conditions.\u003c\/li\u003e\n\u003cli\u003eCCAW voice coils wound on a double layer deliver high efficiency and dynamic, detailed sound.\u003c\/li\u003e\n\u003cli\u003eCotton-fibre pressed paper cone with Light Damping treatment.\u003c\/li\u003e\n\u003cli\u003eRadial Venting System ensures high thermal capability, power handling and reliability.\u003c\/li\u003e\n\u003cli\u003eHigh flux density neodymium magnet flattens impedance and extends frequency response.\u003c\/li\u003e\n\u003cli\u003ePure copper sleeve on the central pole piece provides linear impedance and wide frequency response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts compact dimensions make it well suited to dash or door fitments where space is limited. Grilles are included as standard.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712791765258,"sku":"90255","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-voce-av-3-0-3-7cm-70mm-dash-door-midrange-speaker-with-grills-100w-pair-47165858119946.jpg?v=1748431859"},{"product_id":"audison-voce-av-6-5-6-5-16-5cm-car-midbass-woofer-door-speakers-100w-rms-pair","title":"Audison Voce AV 6.5 6.5\" 16.5cm Car Midbass Woofer Door Speakers 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Voce AV 6.5 is a pair of 165mm (6.5\") midbass woofers from Audison's Voce range, rated at 100W RMS \/ 200W peak, with a cotton-fibre paper cone, aluminium basket and 30mm CCAW voice coil. Designed for door locations in component speaker systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the matching tweeter, see the \u003ca href=\"\/products\/audison-voce-av-1-1-1-1-8-28mm-silk-cotton-dome-tweeter-180w-peak-power-pair\"\u003eAudison Voce AV 1.1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165mm (6.5\") midbass woofer\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W continuous \/ 200W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz – 7kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity (SPL): 91dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 30mm CCAW\u003c\/li\u003e\n\u003cli\u003eXmax: 3mm\u003c\/li\u003e\n\u003cli\u003eResonance (Fs): 68Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVoce AV 6.5\u003c\/h2\u003e\n\u003cp\u003eThe Voce AV 6.5 is engineered to work in close synergy with Audison amplifier technology, drawing directly on experience from the Thesis line. The result is a midbass woofer built for dynamic, detailed sound reproduction in a car door environment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAerodynamic aluminium basket with open-air spoke profile — reduces back-wave reflections.\u003c\/li\u003e\n\u003cli\u003eExclusive Butyl rubber Triple Wave surround for full linearity and reliable performance under extreme conditions.\u003c\/li\u003e\n\u003cli\u003e30mm CCAW (Copper Clad Aluminium Wire) voice coil wound on a double layer — lightweight, high efficiency, dynamic sound.\u003c\/li\u003e\n\u003cli\u003eCotton-fibre pressed paper cone with Light Damping treatment.\u003c\/li\u003e\n\u003cli\u003eRadial Venting System for improved thermal capability, power handling and long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712792781066,"sku":"90257","price":199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-voce-av-6-5-6-5-16-5cm-car-midbass-woofer-door-speakers-100w-rms-pair-47165859528970.jpg?v=1748431853"},{"product_id":"audison-voce-av-k6-6-5-16-5cm-2-way-car-component-speaker-system-125w-rms-pair","title":"Audison Voce AV K6 6.5\" 16.5cm 2 Way Car Component Speaker System 125w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Voce AV K6 is a 6.5\" (165mm) 2-way component speaker kit from Audison's Voce range, rated at 125W RMS (250W peak) at 4 ohms. The kit includes AV 6.5 woofers, AV 1.1 28mm tweeters and passive crossovers, supplied as a pair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165mm woofer + 28mm tweeter\u003c\/li\u003e\n\u003cli\u003ePower handling: 125W RMS \/ 250W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz–22kHz\u003c\/li\u003e\n\u003cli\u003eCrossover point: 2.5kHz @ 12dB\/oct\u003c\/li\u003e\n\u003cli\u003eTweeter level adjustment: +2, 0, -2dB\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair, with crossovers, tweeter mounts and grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVoce AV K6: 2-way 4 ohm kit, 250W peak power, AV 1.1 + AV 6.5 + crossover\u003c\/h2\u003e\n\n\u003ch3\u003eVoce\u003c\/h3\u003e\n\u003cp\u003eThe Audison Voce range is designed to work in close synergy with Audison amplifiers, bringing a high level of refinement to in-car audio reproduction. The AV K6 and AV K5 kits were awarded the EISA Award for European In-Car Speaker System 2010–2011, recognising the advanced technologies built into these components.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eTetolon dome tweeter — a silk and cotton blend with proprietary damping treatment — delivers low mass and resonance-free response up to ultrasonic frequencies.\u003c\/li\u003e\n\u003cli\u003eCCAW (Copper Clad Aluminium Wire) voice coil wound on a double layer for high efficiency and crisp, dynamic sound.\u003c\/li\u003e\n\u003cli\u003eAnnular Rear Damping Chamber geometry with proprietary damping material extends low-frequency response and reduces harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh-flux-density Neodymium magnet for high efficiency and detailed sound.\u003c\/li\u003e\n\u003cli\u003eAerodynamic basket spoke profile with open-air design reduces back-wave reflections.\u003c\/li\u003e\n\u003cli\u003eButyl rubber Triple Wave surround provides full linearity and reliable performance under extreme conditions.\u003c\/li\u003e\n\u003cli\u003eCotton-fibre pressed paper cone with treatment.\u003c\/li\u003e\n\u003cli\u003eRadial Venting System ensures high thermal capability, power handling and long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe AV K6 brings together Audison's full R\u0026amp;D expertise into a component kit designed to deliver wide bandwidth, natural dynamics and fine detail in a front-stage installation. If you're looking for a step-down option, the \u003ca href=\"\/products\/audison-prima-apk-165p-6-5-17cm-2-way-car-component-door-speakers-115w-rms\"\u003eAudison Prima APK 165P\u003c\/a\u003e is a 6.5\" 2-way component set rated at 115W RMS from Audison's Prima range.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712794747146,"sku":"90258","price":399.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-speakers-audison-voce-av-k6-6-5-16-5cm-2-way-car-component-speaker-system-125w-rms-pair-47165861593354.jpg?v=1748431848"},{"product_id":"hertz-uno-x-165-6-5-16-5cm-2-way-car-van-door-coaxial-speakers-55w-rms-pair","title":"Hertz UNO X 165 6.5\" 16.5cm 2 Way Car Van Door Coaxial Speakers 55w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO X 165 is a pair of 6.5\" (165mm) 2-way coaxial speakers rated at 55W RMS (220W peak), from the Hertz UNO range. Designed as a straightforward factory door speaker replacement for cars and vans, they feature a water-repellent pressed-paper cone and a neodymium PEI dome tweeter.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe UNO X 165 is the coaxial version. The UNO range also includes the \u003ca href=\"\/products\/hertz-uno-k-165-6-5-16-5cm-2-way-car-van-door-component-speakers-75w-rms-pair\"\u003eHertz UNO K 165 component speakers\u003c\/a\u003e for those wanting a separate tweeter placement.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165mm (6.5-inch), 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 55W RMS continuous, 220W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60Hz–21kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: 24mm PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eWoofer: water-repellent pressed-paper cone, 25mm copper voice coil, 80mm ferrite magnet\u003c\/li\u003e\n\u003cli\u003eBasket: DIN size\u003c\/li\u003e\n\u003cli\u003eWeight: 0.73kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHertz UNO X 165 two-way coaxial: 165mm (6.5in), 220W, 4 ohms\u003c\/h2\u003e\n\n\u003ch3\u003eUNO speakers: where the sound experience begins\u003c\/h3\u003e\n\n\u003cp\u003eThe X 165 features a tweeter faceplate optimised for exceptional off-axis performance, ensuring a linear frequency response when installed as a factory replacement. The water-repellent pressed-paper cone and foam surround deliver high SPL and extended low-frequency response — rich sound even from an OEM head unit.\u003c\/p\u003e\n\n\u003cp\u003eThe 25mm (1-inch) voice coil, driven by a high flux density 80mm ferrite magnet, provides dynamic power handling for a powerful, undistorted sound. The DIN size basket, finished in abrasion-resistant dust paint, makes factory speaker replacement straightforward.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome for clear high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003eTweeter faceplate optimised for exceptional off-axis performance.\u003c\/li\u003e\n\u003cli\u003eHigh-stiffness metallic-grey pressed-paper cone with water-repellent treatment.\u003c\/li\u003e\n\u003cli\u003eFoam surround combining high sensitivity and deep bass response.\u003c\/li\u003e\n\u003cli\u003ePure copper 25mm (1in) voice coil woofer for highly dynamic power handling.\u003c\/li\u003e\n\u003cli\u003eHigh flux density 80mm (3.15in) ferrite magnet for a powerful, undistorted sound.\u003c\/li\u003e\n\u003cli\u003eEasy-to-install DIN size basket protected by abrasion-resistant dust paint.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712796418314,"sku":"90866","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-uno-x-165-6-5-16-5cm-2-way-car-van-door-coaxial-speakers-55w-rms-pair-47165865263370.jpg?v=1748431845"},{"product_id":"hertz-uno-x-130-5-13cm-130mm-2-way-car-door-coaxial-speaker-kit-40w-rms-pair-3","title":"Hertz UNO X 130 5\" 13cm 130mm 2 Way Car Door Coaxial Speaker Kit 40w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO X 130 is a pair of 5\" (130 mm) 2-way coaxial car speakers rated at 40W RMS (160W peak) at 4 ohms, from Hertz's entry-level UNO X range. A 24 mm neodymium PEI dome tweeter and water-repellent pressed-paper cone make it a straightforward OEM replacement that works well with a factory head unit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 130 mm (5\") version. The UNO X coaxial range is also available as the \u003ca href=\"\/products\/hertz-uno-x-165-6-5-16-5cm-2-way-car-van-door-coaxial-speakers-55w-rms-pair\"\u003eHertz UNO X 165 in 6.5\"\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 130 mm (5\")\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 40W RMS, 160W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz – 21 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: 24 mm neodymium, PEI dome\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 25 mm (1\")\u003c\/li\u003e\n\u003cli\u003eWeight: 0.56 kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUno speakers: where the sound experience begins\u003c\/h2\u003e\n\u003cp\u003eThe X 130's tweeter faceplate is optimised for off-axis performance, keeping frequency response linear in typical factory-replacement positions. The metallic-grey pressed-paper cone is treated for water repellency, and the foam surround delivers high SPL and extended low-frequency response — enough to sound full even through an OEM head unit.\u003c\/p\u003e\n\u003cp\u003eThe 25 mm (1\") voice coil is driven by a high-flux-density ferrite magnet for dynamic, undistorted power handling. The DIN-size basket is protected by an abrasion-resistant dust paint and fits directly into most factory speaker locations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome for clear high-frequency reproduction in a compact footprint.\u003c\/li\u003e\n\u003cli\u003eTweeter faceplate optimised for exceptional off-axis performance.\u003c\/li\u003e\n\u003cli\u003eHigh-stiffness metallic-grey pressed-paper cone with water-repellent treatment.\u003c\/li\u003e\n\u003cli\u003eFoam surround combining high sensitivity and deep bass response.\u003c\/li\u003e\n\u003cli\u003ePure copper 25 mm (1\") voice coil woofer for high dynamic power handling.\u003c\/li\u003e\n\u003cli\u003eHigh-flux-density 70 mm (2.76\") ferrite magnet for powerful, undistorted sound.\u003c\/li\u003e\n\u003cli\u003eEasy-to-install DIN-size basket with abrasion-resistant dust paint finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712797008138,"sku":"90865","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-uno-x-130-5-13cm-130mm-2-way-car-door-coaxial-speaker-kit-40w-rms-pair-47165866934538.jpg?v=1748431846"},{"product_id":"hertz-uno-x-690-6x9-4-way-car-van-parcel-shelf-coaxial-speakers-85w-rms-pair","title":"Hertz UNO X 690 6x9\" 4 Way Car Van Parcel Shelf Coaxial Speakers 85w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO X 690 is a pair of 6x9\" 4-way coaxial speakers rated at 85W RMS (340W peak) at 4 ohms, from the Hertz UNO X range. Designed for parcel shelf and door locations, they feature a 40mm PEI dome tweeter and dual 15mm piezoelectric super-tweeters extending response to 22 kHz.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 inch\u003c\/li\u003e\n\u003cli\u003eType: 4-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 85W RMS, 340W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 45 Hz – 22 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: 40mm PEI dome, ferrite motor\u003c\/li\u003e\n\u003cli\u003eSuper-tweeters: dual 15mm piezoelectric, PEI dome\u003c\/li\u003e\n\u003cli\u003eWoofer magnet: 80mm high density flux ferrite\u003c\/li\u003e\n\u003cli\u003eWeight: 0.93 kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUno speakers: where the sound experience begins\u003c\/h2\u003e\n\u003cp\u003eThe UNO X 690 is built for those replacing a standard 6x9\" OEM setup. The dual 15mm piezoelectric super-tweeters extend frequency response above 20 kHz to maximise stereo imaging. If you need a smaller coaxial for door locations, the \u003ca href=\"\/products\/hertz-uno-x-165-6-5-16-5cm-2-way-car-van-door-coaxial-speakers-55w-rms-pair\"\u003eHertz UNO X 165\u003c\/a\u003e is a 6.5\" 2-way alternative.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual 15mm piezoelectric super-tweeters with PEI dome extend frequency response above 20 kHz.\u003c\/li\u003e\n\u003cli\u003e40mm PEI dome tweeter with ferrite motor for accurate mid-high frequency reproduction.\u003c\/li\u003e\n\u003cli\u003eTweeter and super-tweeter faceplate optimised for exceptional off-axis performance.\u003c\/li\u003e\n\u003cli\u003eHigh-stiffness metallic-grey pressed-paper cone with water-repellent treatment.\u003c\/li\u003e\n\u003cli\u003eFoam surround for high sensitivity and deep bass response.\u003c\/li\u003e\n\u003cli\u003ePure copper 25mm (1 in.) voice coil for high dynamic power handling.\u003c\/li\u003e\n\u003cli\u003e80mm (3.15 in.) high flux density ferrite magnet for powerful, undistorted sound.\u003c\/li\u003e\n\u003cli\u003eDIN size basket with abrasion-resistant dust paint for straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712797794570,"sku":"90868","price":84.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-uno-x-690-6x9-2-way-car-van-parcel-shelf-coaxial-speakers-85w-rms-pair-47165867655434.jpg?v=1748431841"},{"product_id":"hertz-uno-x-170-6-7-16-7cm-2-way-car-door-van-coaxial-speakers-50w-rms-pair","title":"Hertz UNO X 170 6.7\" 16.7cm 2 Way Car Door Van Coaxial Speakers 50w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO X 170 is a pair of 6.7\" (170 mm) 2-way coaxial car speakers rated at 50W RMS \/ 200W peak at 4 ohms. Part of the Hertz UNO range, they feature a neodymium PEI dome tweeter and water-repellent pressed-paper cone, designed as a direct factory speaker replacement for cars and vans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 6.7\" UNO X 170. The UNO X coaxial range is also available in 6.5\" as the \u003ca href=\"\/products\/hertz-uno-x-165-6-5-16-5cm-2-way-car-van-door-coaxial-speakers-55w-rms-pair\"\u003eHertz UNO X 165\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 170 mm (6.7\")\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 50W RMS, 200W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz – 21 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: 24 mm neodymium, PEI dome\u003c\/li\u003e\n\u003cli\u003eWoofer magnet: 80 mm high-density flux ferrite\u003c\/li\u003e\n\u003cli\u003eWeight: 0.56 kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUno speakers: where the sound experience begins\u003c\/h2\u003e\n\u003cp\u003eThe X 170's tweeter faceplate is optimised for exceptional off-axis performance, keeping the frequency response linear in factory replacement positions. The pressed-paper cone is treated with a water-repellent coating, and the foam surround delivers high SPL and extended low-frequency response — producing a rich sound even from an OEM head unit.\u003c\/p\u003e\n\u003cp\u003eA 25 mm (1\") voice coil driven by a high-flux density ferrite magnet provides dynamic power handling with minimal distortion. The DIN-size basket is protected by an abrasion-resistant dust paint and drops straight in as a factory replacement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium tweeter with PEI dome for detailed high-frequency reproduction in a compact form.\u003c\/li\u003e\n\u003cli\u003eTweeter faceplate optimised for exceptional off-axis performance.\u003c\/li\u003e\n\u003cli\u003eHigh-stiffness metallic-grey pressed-paper cone with water-repellent treatment.\u003c\/li\u003e\n\u003cli\u003eFoam surround combining high sensitivity and deep bass response.\u003c\/li\u003e\n\u003cli\u003ePure copper 25 mm (1 in.) voice coil woofer for high dynamic power handling.\u003c\/li\u003e\n\u003cli\u003eHigh-flux density 80 mm (3.15 in.) ferrite magnet for powerful, undistorted sound.\u003c\/li\u003e\n\u003cli\u003eEasy-to-install DIN-size basket protected by abrasion-resistant dust paint.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712798482698,"sku":"90867","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-uno-x-170-6-7-16-7cm-2-way-car-door-van-coaxial-speakers-50w-rms-pair-47165868933386.jpg?v=1748431837"},{"product_id":"hertz-uno-k-130-5-13cm-130mm-2-way-car-door-component-speaker-kit-55w-rms-pair","title":"Hertz UNO K 130 5\" 13cm 130mm 2 Way Car Door Component Speaker Kit 55w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO K 130 is a 5\" (130mm) 2-way component speaker kit from Hertz's UNO range, rated at 55W RMS (220W peak) at 4 ohms. It pairs the V 130 V-cone woofer with the T 24 neodymium PEI dome tweeter, and includes a 6 dB\/octave crossover integrated into the tweeter wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 5\" (130mm). The UNO K component speaker range is also available in \u003ca href=\"\/products\/hertz-uno-k-165-6-5-16-5cm-2-way-car-van-door-component-speakers-75w-rms-pair\"\u003e6.5\" (165mm) — the Hertz UNO K 165\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 5\" (130mm) 2-way component kit\u003c\/li\u003e\n\u003cli\u003ePower handling: 55W RMS, 220W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB SPL\u003c\/li\u003e\n\u003cli\u003eFrequency response: 55 Hz – 23 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: T 24, 24mm PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eWoofer: V 130, 25mm copper voice coil, 70mm ferrite magnet\u003c\/li\u003e\n\u003cli\u003eCrossover: 6 dB\/octave, integrated in the tweeter wiring\u003c\/li\u003e\n\u003cli\u003eBasket: DIN size\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUno speakers: where the sound experience begins\u003c\/h2\u003e\n\u003cp\u003eThe UNO K 130 is a straightforward OEM upgrade. The T 24 tweeter uses a 24mm neodymium-driven PEI dome with an annular acoustic lens for strong off-axis performance and a precise stereo image. The 5\" V 130 woofer uses a pressed-paper V-cone with foam surround, a 25mm copper voice coil, and a high-flux 70mm ferrite magnet for dynamic, undistorted output. The 6 dB\/octave crossover is built into the tweeter wiring, keeping installation simple.\u003c\/p\u003e\n\n\u003ch3\u003eV-cone®\u003c\/h3\u003e\n\u003cp\u003eThe exponential cone profile provides exceptional dispersion across a wide listening area.\u003c\/p\u003e\n\n\u003ch3\u003eT 24 tweeter\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e24mm neodymium tweeter with PEI dome for detailed high-frequency reproduction in a compact size.\u003c\/li\u003e\n\u003cli\u003eAnnular acoustic lens optimised for off-axis performance.\u003c\/li\u003e\n\u003cli\u003e6 dB\/octave crossover integrated into the tweeter wiring.\u003c\/li\u003e\n\u003cli\u003eMounting accessories included for external or flush mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eV 130 woofer\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eV-cone® design for wide off-axis response, clear mid-high detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eFoam surround for high sensitivity and deep bass extension.\u003c\/li\u003e\n\u003cli\u003ePure copper 25mm (1 in.) voice coil for high dynamic power handling.\u003c\/li\u003e\n\u003cli\u003eHigh-flux density 70mm (2.76 in.) ferrite magnet for undistorted output.\u003c\/li\u003e\n\u003cli\u003eDIN size basket with abrasion-resistant dust paint for easy installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712801726730,"sku":"90861","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-uno-k-130-5-13cm-130mm-2-way-car-door-component-speaker-kit-55w-rms-pair-47165869719818.jpg?v=1748431843"},{"product_id":"hertz-uno-k-165-6-5-16-5cm-2-way-car-van-door-component-speakers-75w-rms-pair","title":"Hertz UNO K 165 6.5\" 16.5cm 2 Way Car Van Door Component Speakers 75w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO K 165 is a 6.5\" (165 mm) 2-way component speaker pair from the Hertz UNO range, rated at 75 W RMS (300 W peak) at 4 ohms. It includes 24 mm neodymium tweeters with PEI domes and V-cone woofers, sold as a pair for car and van door installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the UNO K 165 component set. The UNO range is also available as the \u003ca href=\"\/products\/hertz-uno-x-165-6-5-16-5cm-2-way-car-van-door-coaxial-speakers-55w-rms-pair\"\u003eHertz UNO X 165 6.5\" coaxial speaker pair at 55 W RMS\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165 mm (6.5\")\u003c\/li\u003e\n\u003cli\u003eType: 2-way component system\u003c\/li\u003e\n\u003cli\u003ePower handling: 75 W RMS \/ 300 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93.5 dB SPL\u003c\/li\u003e\n\u003cli\u003eFrequency response: 55 Hz – 23 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: 24 mm neodymium with PEI dome\u003c\/li\u003e\n\u003cli\u003eCrossover: 6 dB\/oct, integrated on tweeter wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHertz K 165 two-way system\u003c\/h2\u003e\n\u003cp\u003e165 mm (6.5 in.) | Component system | 300 W peak | 4 ohm.\u003c\/p\u003e\n\n\u003ch3\u003eUno speakers: where the sound experience begins\u003c\/h3\u003e\n\u003cp\u003eThe K 165 features a 24 mm (0.9\") neodymium tweeter with PEI dome for accurate high-frequency reproduction in a compact size. The annular acoustic lens is optimised for off-axis performance, producing a precise stereo image.\u003c\/p\u003e\n\u003cp\u003eThe 6.5\" woofers use a pressed-paper V-cone with foam surround for high SPL and solid bass. A 25 mm (1\") voice coil driven by a high-flux density ferrite magnet delivers dynamic, undistorted power handling. The 6 dB\/oct crossover is integrated on the tweeter wiring for a straightforward OEM upgrade.\u003c\/p\u003e\n\n\u003ch2\u003eV-CONE\u003c\/h2\u003e\n\u003cp\u003eThe exponential cone profile provides exceptional dispersion and strong off-axis response.\u003c\/p\u003e\n\n\u003ch2\u003eT 24 tweeter\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm neodymium tweeter with PEI dome for clear, detailed high frequencies.\u003c\/li\u003e\n\u003cli\u003eAnnular acoustic lens optimised for off-axis performance.\u003c\/li\u003e\n\u003cli\u003e6 dB\/oct crossover integrated on tweeter wiring.\u003c\/li\u003e\n\u003cli\u003eMounting accessories included for external or flush mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eV 165 woofer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eV-cone design for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eFoam surround combining high sensitivity and deep bass response.\u003c\/li\u003e\n\u003cli\u003ePure copper 25 mm (1 in.) voice coil for high dynamic power handling.\u003c\/li\u003e\n\u003cli\u003eHigh flux density 80 mm (3.15 in.) ferrite magnet for powerful, undistorted sound.\u003c\/li\u003e\n\u003cli\u003eEasy to install.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712802283786,"sku":"90862","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-uno-k-165-6-5-16-5cm-2-way-car-van-door-component-speakers-75w-rms-pair-47165871390986.jpg?v=1748431834"},{"product_id":"hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair","title":"Hertz Dieci DCX 165.3 6.5\" 16.5cm 2 Way Car Door Coaxial Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DCX 165.3 is a pair of 6.5\" (165 mm) 2-way coaxial car speakers rated at 60W RMS and 120W peak, from the Hertz Dieci range. They include a built-in crossover for a straightforward drop-in replacement of factory door speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the DCX 165.3 coaxial. The Hertz Dieci range is also available as the \u003ca href=\"\/products\/hertz-dieci-dsk-165-3-6-5-16-5cm-2-way-car-door-component-speakers-80w-rms-pair\"\u003eDSK 165.3 6.5\" 2-way component speaker pair\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165 mm (6.5 in.)\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial with built-in crossover\u003c\/li\u003e\n\u003cli\u003ePower handling: 60W RMS, 120W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 72 mm (2.8 in.)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz to 21 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 25 mm (1 in.)\u003c\/li\u003e\n\u003cli\u003eTweeter: PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDCX 165.3 two-way coaxial\u003c\/h2\u003e\n\u003cp\u003eA straightforward upgrade for factory door speakers, delivering reliable Hertz sound quality without a complex install.\u003c\/p\u003e\n\n\u003ch2\u003eSatisfying every need, in every car\u003c\/h2\u003e\n\u003cp\u003eThe DCX 165.3 is built to fit a wide range of vehicles. A neodymium magnet keeps the design compact and efficient. The PEI dome tweeter handles high frequencies cleanly, while the pressed-paper cone delivers natural midrange. A TPU surround adds durability, and the built-in crossover means no extra components are needed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e165 mm (6.5\") 2-way coaxial speaker\u003c\/li\u003e\n\u003cli\u003e60W RMS power handling\u003c\/li\u003e\n\u003cli\u003e120W peak power handling\u003c\/li\u003e\n\u003cli\u003e4 ohm impedance\u003c\/li\u003e\n\u003cli\u003eNeodymium tweeter magnet\u003c\/li\u003e\n\u003cli\u003ePEI dome tweeter\u003c\/li\u003e\n\u003cli\u003ePressed-paper cone\u003c\/li\u003e\n\u003cli\u003eTPU (Thermoplastic Polyurethane) surround\u003c\/li\u003e\n\u003cli\u003eBuilt-in crossover\u003c\/li\u003e\n\u003cli\u003eMounting depth: 72 mm (2.8\")\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712805134602,"sku":"90786","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair-47165873586442.jpg?v=1748431831"},{"product_id":"hertz-dieci-dcx-130-3-5-13cm-2-way-car-van-door-coaxial-speakers-40w-rms-pair","title":"Hertz Dieci DCX 130.3 5\" 13cm 2 Way Car Van Door Coaxial Speakers 40w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DCX 130.3 is a pair of 5\" (130mm) 2-way coaxial car speakers rated at 40W RMS \/ 80W peak, from Hertz's entry-level Dieci range — a direct drop-in upgrade for factory door speakers in cars and vans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 5\" DCX 130.3. The Hertz Dieci DCX coaxial range is also available in \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003e6.5\" (DCX 165.3, 60W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 130mm (5 in.)\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial with built-in crossover\u003c\/li\u003e\n\u003cli\u003ePower handling: 40W RMS, 80W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 59mm (2.3 in.)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 65Hz to 21kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eCone: water-repellent pressed paper, TPU surround\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDCX 130.3 Two Way Coaxial\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Dieci DCX 130.3 is a fitment-friendly 130mm coaxial speaker designed as a straightforward factory upgrade, without sacrificing Hertz build quality.\u003c\/p\u003e\n\n\u003ch2\u003eSatisfying every need, in every car\u003c\/h2\u003e\n\u003cp\u003eThe DCX 130.3 is built to cover a wide range of installation scenarios. A neodymium magnet keeps the unit compact and efficient. The PEI dome tweeter and pressed-paper cone produce a linear frequency response, while the built-in crossover simplifies wiring. The TPU surround adds long-term durability. If you need a larger coaxial, the \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003eHertz Dieci DCX 165.3\u003c\/a\u003e offers a 6.5\" option at 60W RMS.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 130mm (5 inch)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 59mm (2.3 inch)\u003c\/li\u003e\n\u003cli\u003eConfiguration: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 40W RMS, 80W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eTweeter: PEI dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eCone material: water-repellent pressed paper\u003c\/li\u003e\n\u003cli\u003eSurround material: TPU (Thermoplastic Polyurethane)\u003c\/li\u003e\n\u003cli\u003eBuilt-in crossover included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712805921034,"sku":"90784","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dcx-130-3-5-13cm-2-way-car-van-door-coaxial-speakers-40w-rms-pair-47165874635018.jpg?v=1748431853"},{"product_id":"hertz-dieci-dcx-100-3-4-10cm-2-way-car-door-dash-coaxial-speakers-30w-rms-pair","title":"Hertz Dieci DCX 100.3 4\" 10cm 2 Way Car Door Dash Coaxial Speakers 30w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DCX 100.3 is a pair of 4\" (100 mm) 2-way coaxial car speakers rated at 30W RMS and 60W peak, from Hertz's Dieci range. The 50 mm mounting depth makes them well suited to dashboard and shallow door positions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 4\" DCX 100.3. The Hertz Dieci coaxial range is also available in \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003e6.5\" (DCX 165.3, 60W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 100 mm (4 in.)\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial with built-in crossover\u003c\/li\u003e\n\u003cli\u003ePower handling: 30W RMS, 60W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 50 mm (2.0 in.)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 70 Hz to 21 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 92 dB\u003c\/li\u003e\n\u003cli\u003eTweeter: PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eCone material: Pressed paper\u003c\/li\u003e\n\u003cli\u003eSurround material: TPU (Thermoplastic Polyurethane)\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDCX 100.3 two-way coaxial\u003c\/h2\u003e\n\u003cp\u003eA compact 4\" coaxial speaker from Hertz's Dieci range, built for straightforward fitting without compromising on sound quality.\u003c\/p\u003e\n\n\u003ch2\u003eSatisfying every need, in every car\u003c\/h2\u003e\n\u003cp\u003eThe DCX 100.3 delivers a linear frequency response and consistent reliability across a wide range of vehicles. A neodymium magnet keeps the assembly lightweight, while the PEI dome tweeter and built-in crossover handle high-frequency detail cleanly. The pressed-paper cone and TPU surround work together for accurate, dynamic sound reproduction.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 100 mm (4\")\u003c\/li\u003e\n\u003cli\u003eConfiguration: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 30W RMS, 60W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eTweeter: PEI dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eCone material: Pressed paper\u003c\/li\u003e\n\u003cli\u003eSurround material: TPU (Thermoplastic Polyurethane)\u003c\/li\u003e\n\u003cli\u003eBuilt-in crossover included\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712807002378,"sku":"90783","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dcx-100-3-4-10cm-2-way-car-door-dash-coaxial-speakers-30w-rms-pair-47165877289226.jpg?v=1748431829"},{"product_id":"hertz-dieci-dcx-87-3-3-4-8-7cm-2-way-car-van-dash-coaxial-speakers-30w-rms-pair","title":"Hertz Dieci DCX 87.3 3.4\" 8.7cm 2 Way Car Van Dash Coaxial Speakers 30w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DCX 87.3 is a pair of compact 3.4\" (87 mm) 2-way coaxial car speakers rated at 30W RMS, from the Hertz Dieci range, designed for tight dash and van installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 3.4\" (87 mm) DCX 87.3. The Hertz Dieci coaxial range is also available in \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003e6.5\" (16.5 cm) with the DCX 165.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 87 mm (3.4 in.)\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 30W RMS, 60W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 45 mm (1.8 in.)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 130 Hz to 21 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 20 mm (0.8 in.)\u003c\/li\u003e\n\u003cli\u003eTweeter: 15 mm PEI dome, neodymium magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDCX 87.3 Two Way Coaxial\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver size: 87 mm (3.4\")\u003c\/li\u003e\n\u003cli\u003eMounting depth: 45 mm (1.8\")\u003c\/li\u003e\n\u003cli\u003eTweeter size: 15 mm (0.59\")\u003c\/li\u003e\n\u003cli\u003eConfiguration: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 30W RMS, 60W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSatisfying Every Need, in Every Car\u003c\/h2\u003e\n\u003cp\u003eThe DCX 87.3 pairs a high-performance woofer with a neodymium tweeter using an exclusive PEI dome. An oversized magnetic group gives precise driver control despite the compact dimensions, delivering wide frequency response and clear sound in virtually any installation.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712810934538,"sku":"90791","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dcx-87-3-3-4-8-7cm-2-way-car-van-dash-coaxial-speakers-30w-rms-pair-47165878632714.jpg?v=1748431823"},{"product_id":"hertz-dieci-dcx-570-3-5x7-2-way-car-door-shelf-coaxial-speakers-60w-rms-pair","title":"Hertz Dieci DCX 570.3 5x7\" 2 Way Car Door Shelf Coaxial Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DCX 570.3 is a pair of 5x7\" two-way coaxial car speakers rated at 60W RMS and 120W peak, part of the Hertz Dieci range. They are designed to fit standard 5x7\" factory door and shelf positions without modification.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Dieci coaxial range is also available in a 6.5\" size: \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003eHertz Dieci DCX 165.3 6.5\" 2 Way Car Door Coaxial Speakers 60W RMS Pair\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5 x 7 in.\u003c\/li\u003e\n\u003cli\u003eType: 2-way coaxial with built-in crossover\u003c\/li\u003e\n\u003cli\u003ePower handling: 60W RMS, 120W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 66 mm (2.6 in.)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz to 21 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 25 mm (1 in.)\u003c\/li\u003e\n\u003cli\u003eTweeter: PEI dome, neodymium magnet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDCX 570.3 Two way coaxial\u003c\/h2\u003e\n\u003cp\u003eA direct upgrade for standard 5x7\" factory speaker positions, delivering clean, efficient sound with quality components throughout.\u003c\/p\u003e\n\u003cp\u003eThe DCX 570.3 fits standard 5x7\" factory positions without modification. A neodymium magnet keeps the build compact and lightweight without sacrificing output. The PEI dome tweeter and built-in crossover handle high frequencies cleanly. A TPU surround and copper mobile voice coil wound on a conex former keep the woofer controlled and accurate, resulting in a linear frequency response and high sensitivity. Each speaker handles 60W RMS and 120W peak at 4 ohm.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712811262218,"sku":"90789","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dcx-570-3-5x7-2-way-car-door-shelf-coaxial-speakers-60w-rms-pair-47165880893706.jpg?v=1748431824"},{"product_id":"hertz-dieci-dt-24-3-1-24mm-car-audio-neodymium-tweeters-crossovers-80w-pair","title":"Hertz Dieci DT 24.3 1\" 24mm Car Audio Neodymium Tweeters \u0026 Crossovers 80w Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DT 24.3 is a pair of 1\" (24 mm) PEI dome neodymium tweeters from Hertz's Dieci range, rated at 80W peak and supplied with DX 100 crossovers and mounting hardware for flush or surface installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the same tweeter used in the Hertz Dieci component sets such as the \u003ca href=\"\/products\/hertz-dieci-dsk-130-3-5-13cm-2-way-car-van-door-component-speakers-60w-rms-pair\"\u003eDSK 130.3\u003c\/a\u003e, \u003ca href=\"\/products\/hertz-dieci-dsk-160-3-6-0-16cm-2-way-car-door-component-speakers-80w-rms-pair\"\u003eDSK 160.3\u003c\/a\u003e and \u003ca href=\"\/products\/hertz-dieci-dsk-170-3-6-7-16-7cm-2-way-car-door-component-speakers-80w-rms-pair\"\u003eDSK 170.3\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 24 mm (0.9 in.) PEI dome\u003c\/li\u003e\n\u003cli\u003ePower handling: 80W peak (crossed at 3.5 kHz, 6 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 3 kHz to 23 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 94 dB\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003cli\u003eCrossovers: DX 100 supplied\u003c\/li\u003e\n\u003cli\u003eMounting: flush or angled surface mount\u003c\/li\u003e\n\u003cli\u003eMounting depth: 13 mm (overall depth 20 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDT 24.3 Tweeter\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTweeter size: 24 mm (0.9 in.)\u003c\/li\u003e\n\u003cli\u003ePower handling: 80W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet for high efficiency\u003c\/li\u003e\n\u003cli\u003ePEI membrane for stiffness and heat resistance\u003c\/li\u003e\n\u003cli\u003eAnnular acoustic lens for linear frequency response\u003c\/li\u003e\n\u003cli\u003eSuits surface mount and flush mount installations\u003c\/li\u003e\n\u003cli\u003eMounting brackets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSatisfying every need, in every car\u003c\/h2\u003e\n\u003cp\u003eThe DT 24.3 uses an optimised neodymium structure to deliver extended, linear frequency response. The annular acoustic lens and PEI membrane work together to keep sound detailed and controlled, even at high SPL levels. Universal mounting brackets make fitting straightforward in most vehicles. If you're looking for a larger, higher-powered option, Hertz also offer the \u003ca href=\"\/products\/hertz-mille-pro-mp-28-3-car-audio-tetolon-dome-35mm-tweeters-180w-peak-pair\"\u003eMille Pro MP 28.3 35 mm tweeter\u003c\/a\u003e rated at 180W peak.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712812966154,"sku":"90800","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-tweeters-hertz-dieci-dt-24-3-1-24mm-car-audio-neodymium-tweeters-crossovers-80w-pair-47165884924170.jpg?v=1748431817"},{"product_id":"audison-thesis-th-1-5-ii-violino-custom-neodymium-magnet-38mm-silk-dome-tweeters","title":"Audison Thesis TH 1.5 II Violino Custom Neodymium Magnet 38mm Dome Tweeters","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Thesis TH 1.5 II Violino is a 38mm neodymium dome tweeter from Audison's flagship Thesis range, featuring a custom N38 H-grade magnet, 34mm CCAW single-layer voice coil, 200W peak power handling, and a frequency response extending to 26kHz. It is designed for high-end sound-quality car audio builds requiring a crossover point as low as 1.5kHz.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the matching Thesis midrange and midbass, see the \u003ca href=\"\/products\/audison-thesis-th-3-0-ii-voce-3-70mm-midrange-dash-door-speakers-with-grills\"\u003eAudison Thesis TH 3.0 II voce\u003c\/a\u003e and the \u003ca href=\"\/products\/audison-thesis-th-6-5-ii-sax-6-5-17cm-car-midbass-door-woofer-speakers-150w-rms\"\u003eAudison Thesis TH 6.5 II SAX\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 38mm dome\u003c\/li\u003e\n\u003cli\u003ePower: 200W peak (high-pass filtered at 1.8kHz, 12dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 6 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 800Hz–26kHz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 34mm CCAW single layer\u003c\/li\u003e\n\u003cli\u003eMagnet: custom N38 H-grade neodymium, 1.67 T*m\u003c\/li\u003e\n\u003cli\u003eSensitivity: 92.5dB\u003c\/li\u003e\n\u003cli\u003eTuning system: bottom case or bottom disk load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThesis\u003c\/h2\u003e\n\u003cp\u003eAudison's Thesis range was built around a single principle: transparency. Using Finite Element Method (FEM) simulation software developed in-house, the Audison R\u0026amp;D team created a mathematical model that guided an intensive prototyping process, with the goal of overcoming the inherent limits of conventional loudspeakers.\u003c\/p\u003e\n\u003cp\u003eThe TH 1.5 II Violino uses a 34mm CCAW single-layer voice coil, combining low mass, stability at lower frequencies and no compression of musical transients.\u003c\/p\u003e\n\u003cp\u003eThe custom N38 H-grade neodymium magnet delivers 1.67 T*m in the magnetic gap for strong dynamic response and low distortion across the full frequency range. An exclusive air-loading system brings the resonance frequency below 800Hz, allowing filter set-up from as low as 1.5kHz at 12dB\/oct. The 38mm dome was optimised using material characterisation, laser vibrometer scanning and Finite Element Analysis for a smooth, extended response.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e34mm CCAW single-layer voice coil: low mass, stable at lower frequencies, no musical transient compression.\u003c\/li\u003e\n\u003cli\u003eCustom N38 H-grade neodymium magnet providing 1.67 T*m in the magnetic gap.\u003c\/li\u003e\n\u003cli\u003eExclusive air-loading system: resonance frequency below 800Hz, filter set-up from 1.5kHz at 12dB\/oct.\u003c\/li\u003e\n\u003cli\u003e38mm dome optimised with material characterisation, laser vibrometer scanning and Finite Element Analysis.\u003c\/li\u003e\n\u003cli\u003eFrequency response extended to 26kHz, optimised for off-axis installation.\u003c\/li\u003e\n\u003cli\u003eTuning system with two electro-acoustic load options: bottom case or bottom disk, for performance and installation flexibility.\u003c\/li\u003e\n\u003cli\u003eFull solid metal construction, with every component exclusively designed and produced for the TH 1.5 II.\u003c\/li\u003e\n\u003cli\u003eFEM-optimised faceplate and front spokes for an improved dispersion pattern.\u003c\/li\u003e\n\u003cli\u003eAudison eID technology for TH 1.5 II traceability from manufacture to owner.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712838033674,"sku":"90240","price":999.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-tweeters-audison-thesis-th-1-5-ii-violino-custom-neodymium-magnet-38mm-silk-dome-tweeters-47165911367946.jpg?v=1748431778"},{"product_id":"hertz-dieci-dsk-165-3-6-5-16-5cm-2-way-car-door-component-speakers-80w-rms-pair","title":"Hertz Dieci DSK 165.3 6.5\" 16.5cm 2 Way Car Door Component Speakers 80w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DSK 165.3 is a 6.5\" (165 mm) 2-way component speaker system rated at 80W RMS \/ 160W peak at 4 ohms, featuring a DV 165.3 V-cone woofer and DT 24.3 24 mm PEI dome tweeter. It is part of the Hertz Dieci range and sold as a pair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the DSK 165.3 component set. The Dieci range also includes the \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003eHertz Dieci DCX 165.3 6.5\" coaxial speaker\u003c\/a\u003e in the same size.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 2-way component system (pair)\u003c\/li\u003e\n\u003cli\u003eWoofer size: 165 mm (6.5\"), DV 165.3\u003c\/li\u003e\n\u003cli\u003eTweeter: DT 24.3, 24 mm PEI dome-cone, neodymium magnet\u003c\/li\u003e\n\u003cli\u003ePower handling: 80W continuous, 160W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB SPL\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz – 23 kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: high pass, 3.5 kHz at 12 dB\/oct\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHertz DSK 165.3 Two-Way System\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Dieci series is designed to make building a quality car audio system as straightforward as possible. The woofers use the exclusive V-cone® profile for strong off-axis response and clear mid-high detail. The TPU (thermoplastic polyurethane) surround keeps movement linear and reduces unwanted resonance, even at high excursion. Passive crossover filters are built directly onto the supplied connection cables, and a full set of installation accessories is included.\u003c\/p\u003e\n\n\u003ch2\u003eV-cone®\u003c\/h2\u003e\n\u003cp\u003eThe exponential cone profile closely matches the ideal dispersion curve, delivering exceptional off-axis response.\u003c\/p\u003e\n\n\u003ch2\u003eDT 24.3 Tweeter\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh-energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for surface or flush mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDV 165.3 Woofer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for precise voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil wound on a conex former for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eTPU surround for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eDIN-size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high-current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover against knocks and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue bonding for basket and motor system ensures perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow-carbon-content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712838361354,"sku":"90798","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dsk-165-3-6-5-16-5cm-2-way-car-door-component-speakers-80w-rms-pair-47165913661706.jpg?v=1748431788"},{"product_id":"hertz-dieci-dsk-130-3-5-13cm-2-way-car-van-door-component-speakers-60w-rms-pair","title":"Hertz Dieci DSK 130.3 5\" 13cm 2 Way Car Van Door Component Speakers 60w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DSK 130.3 is a 5\" (130 mm) 2-way component speaker set from the Hertz Dieci range, rated at 60W RMS and 120W peak. It pairs DV 130.3 woofers with DT 24.3 24 mm PEI dome tweeters, with passive crossover filters built into the supplied connection cables.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 5\" DSK 130.3. The Hertz Dieci component speaker range is also available as the \u003ca href=\"\/products\/hertz-dieci-dsk-165-3-6-5-16-5cm-2-way-car-door-component-speakers-80w-rms-pair\"\u003eHertz Dieci DSK 165.3 in 6.5\"\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe tweeter in this set is also sold separately as the \u003ca href=\"\/products\/hertz-dieci-dt-24-3-1-24mm-car-audio-neodymium-tweeters-crossovers-80w-pair\"\u003eHertz Dieci DT 24.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer size: 130 mm (5 in.)\u003c\/li\u003e\n\u003cli\u003eType: 2-way component set\u003c\/li\u003e\n\u003cli\u003ePower handling: 60W RMS, 120W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB SPL\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz to 23 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: DT 24.3, 24 mm PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eTweeter high-pass: 3.5 kHz at 12 dB\/oct\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 25 mm (1 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDSK 130.3 Two way system\u003c\/h2\u003e\n\u003cp\u003e130 mm (5 in.) | Two-way system | 120W peak | 4 ohm\u003c\/p\u003e\n\n\u003ch2\u003eSatisfying every need, in every car\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Dieci series is designed to deliver a high-quality audio system with minimal complexity. The woofers use Hertz's exclusive V-cone® profile for strong off-axis response and detailed mid-high frequency reproduction. A TPU (thermoplastic polyurethane) surround ensures linearity and reduces unwanted resonance, even at high excursion.\u003c\/p\u003e\n\u003cp\u003eThe neodymium motor assembly and PEI membrane deliver an extended high-frequency range. Passive crossover filters are built directly into the supplied connection cables, and a full set of mounting accessories is included to simplify installation.\u003c\/p\u003e\n\n\u003ch2\u003eV-cone®\u003c\/h2\u003e\n\u003cp\u003eThe exponential cone profile approaches the ideal dispersion curve, providing exceptional off-axis sound distribution.\u003c\/p\u003e\n\n\u003ch2\u003eDT 24.3\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh-energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for external or flush mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDV 130.3\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for precise voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil wound on a conex former for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eTPU surround for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eDIN-size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high-current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover against impacts and abrasion.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue bonding of basket and motor system for perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712839409930,"sku":"90796","price":105.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dsk-130-3-5-13cm-2-way-car-van-door-component-speakers-60w-rms-pair-47165915103498.jpg?v=1748431765"},{"product_id":"hertz-dieci-dsk-170-3-6-7-16-7cm-2-way-car-door-component-speakers-80w-rms-pair","title":"Hertz Dieci DSK 170.3 6.7\" 16.7cm 2 Way Car Door Component Speakers 80w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Dieci DSK 170.3 is a 6.7\" (170 mm) 2-way component speaker set rated at 80W RMS \/ 160W peak, pairing DV 170.3 woofers with DT 24.3 24 mm PEI dome tweeters. It is part of the Hertz Dieci series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 6.7\" DSK 170.3. The Hertz Dieci component speaker range is also available in \u003ca href=\"\/products\/hertz-dieci-dsk-165-3-6-5-16-5cm-2-way-car-door-component-speakers-80w-rms-pair\"\u003e6.5\" as the DSK 165.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe tweeter in this set is also sold separately as the \u003ca href=\"\/products\/hertz-dieci-dt-24-3-1-24mm-car-audio-neodymium-tweeters-crossovers-80w-pair\"\u003eHertz Dieci DT 24.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer size: 170 mm (6.7 in.)\u003c\/li\u003e\n\u003cli\u003eType: 2-way component set\u003c\/li\u003e\n\u003cli\u003ePower handling: 80W RMS, 160W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB SPL\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz to 23 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: DT 24.3, 24 mm PEI dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eTweeter high-pass: 3.5 kHz at 12 dB\/oct\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 25 mm (1 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDSK 170.3 Two way system\u003c\/h2\u003e\n\u003cp\u003e170 (6.7) mm (in.) | Two Way System | 160W peak | 4 Ohm\u003c\/p\u003e\n\n\u003ch2\u003eSatisfying every need, in every car\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Dieci series is designed to deliver a high-quality audio system with minimal complexity. The woofers use the exclusive V-cone® profile for strong off-axis response and detailed mid-high range. The TPU (Thermoplastic Polyurethane) surround maintains linearity and reduces unwanted resonance, even at high excursion.\u003c\/p\u003e\n\u003cp\u003eThe neodymium motor assembly and PEI membrane extend the high-frequency range. Passive filters are built directly into the supplied connection cables, and a full set of accessories is included to simplify installation.\u003c\/p\u003e\n\n\u003ch2\u003eV-cone®\u003c\/h2\u003e\n\u003cp\u003eThe exponential profile closely approximates the ideal form, delivering exceptional dispersion.\u003c\/p\u003e\n\n\u003ch2\u003eDT 24.3\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e24 mm PEI dome-cone tweeter.\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency annular acoustic lens.\u003c\/li\u003e\n\u003cli\u003eHigh-energy neodymium magnet.\u003c\/li\u003e\n\u003cli\u003eMounting accessories for external or flush mounting included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDV 170.3\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge motor assembly for precise voice coil control.\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil wound on a conex former for maximum lightness.\u003c\/li\u003e\n\u003cli\u003eV-cone® for best off-axis response, clear mid-high frequency detail and powerful bass.\u003c\/li\u003e\n\u003cli\u003eTPU surround for wide excursion and resonance damping.\u003c\/li\u003e\n\u003cli\u003eDIN size basket protected by abrasion-proof dust paint.\u003c\/li\u003e\n\u003cli\u003eTin-plated, high-current terminals.\u003c\/li\u003e\n\u003cli\u003eSilver-plated lead wires for maximum reliability and conductivity.\u003c\/li\u003e\n\u003cli\u003eButyl rubber protective cover against crashes and abrasions.\u003c\/li\u003e\n\u003cli\u003eEpoxy glue bonding the basket and motor system for perfect coupling.\u003c\/li\u003e\n\u003cli\u003eLow carbon content plates for maximum magnetic permeability and high heat dissipation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712841146634,"sku":"90799","price":119.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-dieci-dsk-170-3-6-7-16-7cm-2-way-car-door-component-speakers-80w-rms-pair-47165917364490.jpg?v=1748431763"},{"product_id":"hertz-mille-legend-ml-280-3-1-38-inch-35mm-tetolon-dome-tweeters-100w-rms-pair","title":"Hertz Mille Legend ML 280.3 1.38 Inch 35mm Tetolon Dome Tweeters Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend ML 280.3 is a 1.38 inch (35 mm) Tetolon fibre dome tweeter with a neodymium magnet and CNC-machined aluminium body, handling 180 W peak. It is part of Hertz's flagship Mille Legend range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe ML 280.3 is also the tweeter supplied in the \u003ca href=\"\/products\/hertz-mille-legend-mlk-1650-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair\"\u003eMLK 1650.3\u003c\/a\u003e and \u003ca href=\"\/products\/hertz-mille-legend-mlk-700-3-3-inch-70mm-component-speaker-system-100w-rms-pair\"\u003eMLK 700.3\u003c\/a\u003e Legend component systems.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDome: 35 mm (1.38 inch) Tetolon fibre\u003c\/li\u003e\n\u003cli\u003ePower handling: 180 W peak (high-pass at 1.8 kHz, 12 dB\/octave)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eVoice coil: 28 mm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 1 kHz to 28 kHz\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003cli\u003eRear chamber resonance: 900 Hz Fs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHertz ML 280.3 Legend\u003c\/h2\u003e\n\u003cp\u003e35 (1.38) mm (in.) | Tweeter | 180 W | 4 Ohm\u003c\/p\u003e\n\u003cp\u003eThe ML 280.3 is Hertz's evolution of a tweeter long regarded as a reference in car audio. FEA simulations guided optimisation of the Tetolon dome geometry, face plate profile and magnetic circuit to reduce distortion and improve high-frequency dispersion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimised with FEA magnetic flux simulations for precise control and fast transient response.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper short circuit ring for extended very high frequency performance.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium face plate with FEA-optimised profile for improved frequency response and dispersion.\u003c\/li\u003e\n\u003cli\u003eTetolon fibre dome optimised with FEA simulations for lower distortion and better high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003eFrame and rear load chamber both CNC machined from solid aluminium for a mechanically inert, resonance-free structure.\u003c\/li\u003e\n\u003cli\u003eRear chamber tuned to 900 Hz Fs — 50% larger overall volume than the previous generation — extending low-frequency response and reducing distortion through the crossover region, allowing a lower cut-off frequency.\u003c\/li\u003e\n\u003cli\u003eHigh-density damping material beneath the dome; low-density absorbing material in the rear chamber for fluid acoustic emission and strong low-frequency damping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are considering a step down from the Mille Legend range, the \u003ca href=\"\/products\/hertz-mille-pro-mp-28-3-car-audio-tetolon-dome-35mm-tweeters-180w-peak-pair\"\u003eHertz Mille Pro MP 28.3\u003c\/a\u003e offers a 35 mm Tetolon dome tweeter at 180 W peak.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712844718346,"sku":"90821","price":269.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-tweeters-hertz-mille-legend-ml-280-3-1-38-inch-35mm-tetolon-dome-tweeters-100w-rms-pair-47165923787018.jpg?v=1748431763"},{"product_id":"hertz-mille-legend-ml-700-3-70mm-3-inch-midrange-component-speakers-100w-pair","title":"Hertz Mille Legend ML 700.3 70mm 3 Inch Midrange Component Speakers 100w Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend ML 700.3 is a 70mm (3-inch) midrange component speaker pair from the Hertz Mille Legend range, handling 100W peak at 4 ohms. Designed for high-end and competition car audio systems, it pairs with the ML 1800.3 Legend woofer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComponent: midrange, 70mm (3\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W peak (high-pass filtered at 250Hz, 12dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 200Hz to 20kHz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 20mm (0.8\")\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium, 45 x 25 x 3.5mm\u003c\/li\u003e\n\u003cli\u003eCone: pressed-pulp with cotton fibres\u003c\/li\u003e\n\u003cli\u003eWeight: 0.21kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eML 700.3 Legend: 70mm (3\") midrange, 100W, 4 ohm\u003c\/h2\u003e\n\u003cp\u003eThe ML 700.3 Legend delivers extreme dynamics, high power handling and a realistic sound stage. It features V-cone geometry, a neodymium magnet assembly and a three-spoke anti-resonant aluminium alloy basket with vented holes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimised with FEA simulations for superior dynamics and control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eExtremely pure copper covered central pole and one-layer mobile coil for wider extension in the high frequency range.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone with optimised geometry for utmost linearity and dispersion.\u003c\/li\u003e\n\u003cli\u003eCONEX spider with optimised profile for maximum transparent acoustics at mid-high frequency.\u003c\/li\u003e\n\u003cli\u003e\"Boundary Free\" IIR rubber surround for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and light weight for wide frequency response and limited break-ups at high frequency.\u003c\/li\u003e\n\u003cli\u003eJunction point between cone and former optimised with FEA methods for more integral coupling and wider extension at high frequency.\u003c\/li\u003e\n\u003cli\u003eThree-spoke anti-resonant aluminium alloy basket with built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium grille featuring diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Boundary Free Surround increases the emission diameter from 60 to 65mm, extending and properly damping low frequency response. This makes the ML 700.3 an excellent match for the ML 1800.3 Legend, building an ultra-performing system suited to competition use.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712844882186,"sku":"90822","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-legend-ml-700-3-70mm-3-inch-midrange-component-speakers-100w-pair-47165924507914.jpg?v=1748431788"},{"product_id":"hertz-mille-legend-ml-1650-3-6-5-16-5cm-midrange-woofer-speakers-125w-rms-pair","title":"Hertz Mille Legend ML 1650.3 6.5\" 16.5cm Midbass Woofer Speakers 125w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend ML 1650.3 is a pair of 6.5\" (165mm) midbass woofers rated at 125W RMS \/ 250W peak, from Hertz's flagship Mille Legend range. Designed for door installation in component systems, they feature a neodymium motor, 36mm CCAW double-layer voice coil, and V-cone® profile for high power handling and low distortion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 165mm (6.5\") midbass woofer, door installation\u003c\/li\u003e\n\u003cli\u003ePower handling: 125W RMS continuous, 250W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40Hz – 6.5kHz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 36mm CCAW, double layer, polyamide former\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003cli\u003eCone: pressed pulp with cotton fibres, V-cone® profile\u003c\/li\u003e\n\u003cli\u003eXmech: ±9mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.29kg per speaker\u003c\/li\u003e\n\u003cli\u003eSupplied with die-cast aluminium grille\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eML 1650.3 Legend: extreme dynamics, high power handling, realistic sound stage\u003c\/h2\u003e\n\u003cp\u003eThe Mille Legend line has long been the choice of enthusiasts demanding extreme performance. With the ML 1650.3, Hertz's designers pushed the limits further for a woofer built specifically for door installation in high-end component systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimised with FEA simulations for real dynamics and precise control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAluminium covered pole for linear impedance modulation and low distortion.\u003c\/li\u003e\n\u003cli\u003e36mm CCAW double-layer voice coil wound on a polyamide former for exceptional power handling and compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimised geometry for linearity and dispersion in the mid-frequency range.\u003c\/li\u003e\n\u003cli\u003e\"Boundary Free\" IIR rubber surround for better efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and light weight for wide frequency response and limited break-up at high frequencies.\u003c\/li\u003e\n\u003cli\u003eThree-spoke anti-resonant aluminium alloy basket with built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium grille supplied, featuring a diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDevelopment involved extensive in-car voicing sessions, multiple prototypes built using FEA simulation, and rigorous measurement with the Klippel® suite and Klippel Scan Vibrometer. The 36mm voice coil delivers the best compromise between power handling and high-frequency response, while the V-cone® profile prevents cone deformation during long excursions, keeping the cone working as a true piston and maximising acoustic pressure output.\u003c\/p\u003e\n\u003cp\u003eIf you're building a component system at a lower budget, the \u003ca href=\"\/products\/hertz-dieci-dsk-165-3-6-5-16-5cm-2-way-car-door-component-speakers-80w-rms-pair\"\u003eHertz Dieci DSK 165.3\u003c\/a\u003e is a 6.5\" component set rated at 80W RMS and offers a strong step-up entry point into the Hertz range.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712845668618,"sku":"90817","price":429.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-legend-ml-1650-3-6-5-16-5cm-midrange-woofer-speakers-125w-rms-pair-47165925916938.jpg?v=1748431761"},{"product_id":"hertz-mille-legend-ml-1800-3-7-inch-18cm-midrange-woofer-speaker-200w-rms-pair","title":"Hertz Mille Legend ML 1800.3 7 Inch 18cm Midrange Woofer Speaker 200w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend ML 1800.3 is a 7-inch (180 mm) midrange woofer pair rated at 200 W RMS, featuring a 50 mm voice coil and neodymium magnet. It is part of Hertz's flagship Mille Legend range, designed for competition sound quality installations requiring extended low-frequency performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIt pairs with the \u003ca href=\"\/products\/hertz-mille-legend-mlk-700-3-3-inch-70mm-component-speaker-system-100w-rms-pair\"\u003eMLK 700.3\u003c\/a\u003e midrange and tweeter set to build a complete, actively filtered Mille Legend system.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 180 mm (7 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 200 W continuous, 400 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eVoice coil: 50 mm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 38 Hz to 6 kHz\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003cli\u003eCone: pressed pulp with cotton fibres\u003c\/li\u003e\n\u003cli\u003eSold as: pair, with grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eML 1800.3 Legend\u003c\/h2\u003e\n\u003cp\u003eThe ML 1800.3 is designed for competition enthusiasts who need a woofer combining the tonal accuracy of the ML 1650.3 Legend with greater low-frequency extension. The larger emission surface, higher power handling, and 50 mm voice coil deliver the control and dynamics required in demanding installations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeodymium magnet optimised with FEA simulations for real dynamics and maximum control.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAluminium covered pole for linear impedance modulation and low distortion.\u003c\/li\u003e\n\u003cli\u003e50 mm CCAW double-layer voice coil wound on a Polyamide former for exceptional power handling and compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimised geometry for maximum linearity and dispersion.\u003c\/li\u003e\n\u003cli\u003e\"Boundary Free\" IIR rubber surround for better efficiency and wider mid-bass frequency range.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres, combining stiffness and low weight for wide frequency response and limited break-ups at high frequencies.\u003c\/li\u003e\n\u003cli\u003eThree-spoke, acoustically transparent anti-resonant aluminium alloy basket with built-in venting holes.\u003c\/li\u003e\n\u003cli\u003eCNC machined diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium factory-supplied grille featuring a diamond-cut aluminium Hertz logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBoundary Free Surround technology\u003c\/h2\u003e\n\u003cp\u003eThe \"Boundary Free Surround\" is a new surround-to-basket bonding system developed by Hertz's electro-acoustic designers. It provides a wider cone emission surface for a given driver diameter, allowing the cone to move a greater mass of air and produce more acoustic pressure. This ensures maximum stability and symmetry at high excursions, maintaining impact and extension into the low-frequency range.\u003c\/p\u003e\n\u003cp\u003eDevelopment involved extensive in-car voicing sessions, multiple prototypes built using FEA simulation, and a full suite of measurements carried out with the Klippel® measurement system.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712846487818,"sku":"90818","price":579.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-legend-ml-1800-3-7-inch-18cm-midrange-woofer-speaker-200w-rms-pair-47165927457034.jpg?v=1748431751"},{"product_id":"hertz-mille-legend-mlk-700-3-3-inch-70mm-component-speaker-system-100w-rms-pair","title":"Hertz Mille Legend MLK 700.3 3 Inch 70mm Component Speaker System 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend MLK 700.3 is a 3-inch (70 mm) midrange and tweeter component speaker system rated at 100 W RMS, from Hertz's flagship Mille Legend range. It is designed for mid and high frequency reproduction in a multi-amplified system alongside a Mille Legend woofer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIt is designed to combine with the \u003ca href=\"\/products\/hertz-mille-legend-ml-1800-3-7-inch-18cm-midrange-woofer-speaker-200w-rms-pair\"\u003eML 1800.3\u003c\/a\u003e woofer or the ML 1650.3, actively filtered.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMidrange driver: ML 700.3, 70 mm (3 inch)\u003c\/li\u003e\n\u003cli\u003eTweeter: ML 280.3, 35 mm\u003c\/li\u003e\n\u003cli\u003ePower handling: 100 W continuous, 200 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: midrange 90 dB, tweeter 92 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 200 Hz to 28 kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: MLCX 2 TM.3, 4.5 kHz at 6\/12 dB\/octave\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMLK 700.3 Legend\u003c\/h2\u003e\n\u003cp\u003eThe MLK 700.3 is a mid-high frequency component system built to pair with a Mille Legend woofer — either the ML 1650.3 or ML 1800.3 — in an actively filtered, multi-amplified setup. The kit comprises three components: the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter, and the MLCX 2 TM.3 dedicated crossover. That crossover includes a unique Mid-Contour control with a three-position selector, which adjusts the cross-point between the midrange and tweeter to let you tune the mid-frequency character to your preference.\u003c\/p\u003e\n\n\u003cp\u003eThe ML 700.3 midrange uses a V-cone® exponential profile without a traditional dustcap, a geometry that promotes exceptional dispersion and extends high-frequency output further than a conventional midrange. This means the MLK 700.3 can serve as the foundation of a purist two-way system when paired with the ML 1650.3 or ML 1800.3 Legend woofer.\u003c\/p\u003e\n\n\u003cp\u003eWith only one cross-point in the system, phase rotation is kept to a minimum, which helps deliver a precise soundstage and consistent tonal balance across the frequency range. Because the mid-high frequencies are handled by the ML 700.3 and the lows by the ML 1800.3, the entire audio range is reproduced by drivers built from the same materials and sharing the same electro-acoustic structure — a level of consistency that is not possible when mixing a conventional woofer and tweeter.\u003c\/p\u003e\n\n\u003cp\u003eThis uniformity in materials and construction produces very high timbre consistency, allowing the speakers to blend seamlessly into the music rather than drawing attention to themselves.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712848847114,"sku":"90827","price":699.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-legend-mlk-700-3-3-inch-70mm-component-speaker-system-100w-rms-pair-47165931979018.jpg?v=1748431755"},{"product_id":"hertz-mille-legend-mlk-1650-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair","title":"Hertz Mille Legend MLK 1650.3 6.5 Inch 16.5cm Component Speakers 150w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend MLK 1650.3 is a 6.5 inch (165 mm) two-way component speaker system rated at 150 W RMS (300 W peak). It pairs the ML 1650.3 woofer with the ML 280.3 35 mm tweeter and the bi-amp capable MLCX 2 TW.3 crossover. It is part of the Hertz Mille Legend range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe tweeter is also sold separately as the \u003ca href=\"\/products\/hertz-mille-legend-ml-280-3-1-38-inch-35mm-tetolon-dome-tweeters-100w-rms-pair\"\u003eML 280.3\u003c\/a\u003e. For a ferrite-magnet alternative at the same size and power rating, see the \u003ca href=\"\/products\/hertz-mille-legend-mlk-165-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair\"\u003eMLK 165.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165 mm (6.5 inch) two-way component system\u003c\/li\u003e\n\u003cli\u003ePower handling: 150 W RMS continuous, 300 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40 Hz to 28 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: ML 280.3, 35 mm dome\u003c\/li\u003e\n\u003cli\u003eCrossover: MLCX 2 TW.3, crossover points at 2.5 kHz or 3.5 kHz, with bi-amp switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMLK 1650.3 Legend\u003c\/h2\u003e\n\u003cp\u003eThe MLK 1650.3 is a two-way component kit aimed at purists. It combines high dynamics with an extended frequency response and strong timbre consistency.\u003c\/p\u003e\n\u003cp\u003eThe MLCX 2 TW.3 crossover includes a bi-amp switch, allowing two amplifiers or two separate channels to drive the woofer and tweeter independently. This unlocks the full performance potential of the system.\u003c\/p\u003e\n\u003cp\u003eThe crossover also features Mid-Contour and Hi-Contour controls. Each is a two-position selector — Mid-Contour adjusts the woofer cut-off frequency, Hi-Contour adjusts the tweeter cut-off frequency. Together they let you fine-tune the system's frequency response to suit your vehicle's acoustics, speaker placement, and personal preference.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712849731850,"sku":"90826","price":799.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-legend-mlk-1650-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair-47165934698762.jpg?v=1748431741"},{"product_id":"hertz-mille-legend-mlk-165-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair","title":"Hertz Mille Legend MLK 165.3 6.5 Inch 16.5cm Component Speakers 150w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend MLK 165.3 is a 6.5 inch (165 mm) two-way component speaker system rated at 150 W RMS (300 W peak), from Hertz's Mille Legend range. The kit comprises the ML 165.3 woofer, ML 28.3 tweeter and MLCX 165.3 crossover.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor a bi-amp capable kit with the ML 280.3 tweeter, see the \u003ca href=\"\/products\/hertz-mille-legend-mlk-1650-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair\"\u003eMLK 1650.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165 mm (6.5 inch) two-way component\u003c\/li\u003e\n\u003cli\u003ePower handling: 150 W continuous, 300 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 92 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40 Hz to 25 kHz\u003c\/li\u003e\n\u003cli\u003eTweeter: ML 28.3, 35 mm\u003c\/li\u003e\n\u003cli\u003eCrossover: MLCX 165.3, 3.5 kHz at 12 dB\/octave\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMLK 165.3 Legend\u003c\/h2\u003e\n\u003cp\u003eThe MLK 165.3 system pairs the ML 165.3 woofer and ML 28.3 tweeter with the dedicated MLCX 165.3 crossover.\u003c\/p\u003e\n\n\u003cp\u003eThe ML 165.3 woofer shares its core technologies with the ML 1650.3 Legend, including a Boundary Free Surround, a V-cone profile pressed-pulp cone with cotton fibres, and a six-spoke aluminium basket with vented holes. It uses a high-density ferrite magnet assembly, optimised for mid-frequency performance.\u003c\/p\u003e\n\n\u003cp\u003eThe ML 28.3 tweeter uses the same Neodymium magnet assembly as the ML 280.3 Legend and benefits from FEA-optimised dome profiling. It omits the more exotic features of the ML 280.3 — the die-cast aluminium faceplate, CNC-machined solid aluminium body and copper short-circuit ring — but retains the same core acoustic engineering.\u003c\/p\u003e\n\n\u003cp\u003eThe MLCX 165.3 crossover includes a Hi-Contour control to adjust the ML 28.3 tweeter's cut-off frequency, allowing the crossover point with the ML 165.3 woofer to be set according to speaker placement in the vehicle. A three-position tweeter level control with 2 dB step attenuation enables fine-tuning of timbre balance.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712850583818,"sku":"90825","price":499.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-legend-mlk-165-3-6-5-inch-16-5cm-component-speakers-150w-rms-pair-47165936369930.jpg?v=1748431737"},{"product_id":"hertz-mille-pro-mpx-165-3-6-5-16-5cm-car-2-way-coaxial-speakers-100w-rms-pair","title":"Hertz Mille Pro MPX 165.3 6.5\" 16.5cm Car 2 Way Coaxial Speakers 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MPX 165.3 is a pair of 6.5\" (165 mm) 2-way coaxial car speakers rated at 100W RMS \/ 200W peak into 4 Ohm, from Hertz's premium Mille Pro range. The concentric tweeter sits within the woofer voice coil to create a single point of sound emission for a natural, detailed sound stage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 165 mm (6.5\")\u003c\/li\u003e\n\u003cli\u003eConfiguration: 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W RMS continuous \/ 200W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 Ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 45 Hz – 21.5 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer voice coil: 36 mm pure copper, wound on a Polyamide former\u003c\/li\u003e\n\u003cli\u003eTweeter: 20 mm voice coil, Tetolon dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eCone: Pressed pulp with cotton fibres\u003c\/li\u003e\n\u003cli\u003eBasket: Low mounting depth, acoustically transparent aluminium alloy with diamond cutting and aluminium Hertz logo\u003c\/li\u003e\n\u003cli\u003eWeight: 1.27 kg per speaker\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConcentric coaxial design\u003c\/h2\u003e\n\u003cp\u003eThe tweeter is built concentrically within the woofer voice coil, creating one single linear-phase emission point for natural timbre and a detailed sound stage — much like the experience of live music.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric coaxial tweeter:\u003c\/strong\u003e positioned in the woofer voice coil for a single point of emission, recreating a virtual sound stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter support working as a rear chamber:\u003c\/strong\u003e sized for low Fs to ensure well-damped high-pass frequency roll-off, allowing a low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 mm pure copper woofer voice coil:\u003c\/strong\u003e wound on a Polyamide former for outstanding power handling and dynamic compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-pulp cone with cotton fibres:\u003c\/strong\u003e combines stiffness and light weight for a wide frequency response. The cone profile is geometrically refined to match the tweeter emission and maintain phase consistency through the crossover area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\"Boundary Free\" rubber surround:\u003c\/strong\u003e improves efficiency and extends midbass frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-sized ferrite magnet:\u003c\/strong\u003e combined with very low carbon content iron plates for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium alloy basket:\u003c\/strong\u003e low mounting depth, acoustically transparent, with elegant diamond cutting and the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-vibration rubber magnet cover:\u003c\/strong\u003e damps spurious vibrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe \"Center Tuning Duct\" geometry lowers the tweeter resonance frequency, while internal damping materials ensure linear acoustic emission. An acoustic lens optimises the off-axis response — particularly useful in typical door installations — and the 36 mm woofer voice coil delivers deep, controlled bass.\u003c\/p\u003e\n\n\u003cp\u003eIf you're looking for a coaxial speaker at a lower power level, the \u003ca href=\"\/products\/hertz-dieci-dcx-165-3-6-5-16-5cm-2-way-car-door-coaxial-speakers-60w-rms-pair\"\u003eHertz Dieci DCX 165.3\u003c\/a\u003e is a 6.5\" 2-way coaxial rated at 60W RMS and offers a more budget-friendly entry point into the Hertz range.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712855400714,"sku":"90855","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-pro-mpx-165-3-6-5-16-5cm-car-2-way-coaxial-speakers-100w-rms-pair-47165945610506.jpg?v=1748431718"},{"product_id":"hertz-mille-pro-mpx-690-3-6x9-car-3-way-coaxial-parcel-shelf-speakers-130w-pair","title":"Hertz Mille Pro MPX 690.3 6x9\" Car 3 Way Coaxial Parcel Shelf Speakers 130w Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MPX 690.3 is a 6x9\" 3-way coaxial speaker pair rated at 130W RMS (260W peak) at 4 ohms, from Hertz's Mille Pro range. Designed for rear deck (parcel shelf) mounting, it combines a pressed-pulp woofer with a Tetolon dome tweeter and super tweeter for detailed, full-range sound.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 inch 3-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 130W RMS, 260W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 30 Hz – 24 kHz\u003c\/li\u003e\n\u003cli\u003eWoofer: 38 mm copper voice coil, pressed-pulp cone with cotton fibres\u003c\/li\u003e\n\u003cli\u003eTweeter: Tetolon dome, 28 mm voice coil, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eSuper tweeter: Tetolon dome, 20 mm voice coil\u003c\/li\u003e\n\u003cli\u003eWeight: 2.28 kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eExtreme dynamics, unlimited power handling, realistic sound stage\u003c\/h2\u003e\n\u003cp\u003eThe MPX 690.3 is a 3-way coaxial optimised for rear deck mounting. Its Tetolon tweeter uses a 28 mm voice coil and neodymium magnet, with a faceplate profile shaped to maximise off-axis dispersion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e38 mm pure copper woofer voice coil wound on a polyamide former for exceptional power handling and compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003ePressed-pulp cone with cotton fibres combines stiffness and low weight for a wide frequency response.\u003c\/li\u003e\n\u003cli\u003eLarge rubber surround designed for long throw and effective sound damping.\u003c\/li\u003e\n\u003cli\u003eOversized ferrite magnet with very low carbon content iron plates reduces distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eAerodynamic, acoustically transparent aluminium alloy basket eliminates rear wave reflections.\u003c\/li\u003e\n\u003cli\u003eAnti-vibration rubber magnet cover damps spurious vibrations.\u003c\/li\u003e\n\u003cli\u003e28 mm voice coil neodymium Tetolon fibre dome tweeter for undistorted mid-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e20 mm voice coil neodymium Tetolon fibre dome super tweeter compensates for frequency response drop-off caused by horizontal speaker installation.\u003c\/li\u003e\n\u003cli\u003eTweeter faceplate geometry optimised using FEM (Finite Element Modelling) simulations for excellent off-axis frequency response up to 24 kHz.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grille with aluminium Hertz logo and mineral powder-coated inner grille included, offering several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe super tweeter strengthens very high frequency output, while the basket radial venting system keeps operating temperatures low. The result is an impactful, controlled sound even at high dynamic listening levels.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712856219914,"sku":"90856","price":329.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-pro-mpx-690-3-6x9-car-3-way-coaxial-parcel-shelf-speakers-130w-pair-47165946855690.jpg?v=1748431721"},{"product_id":"hertz-mille-pro-mp-25-3-car-audio-tetolon-dome-29mm-tweeters-120w-peak-pair","title":"Hertz Mille Pro MP 25.3 Car Audio Tetolon Dome 29mm Tweeters 120w Peak Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 25.3 is a 29 mm Tetolon fibre soft-dome tweeter with a 25 mm ferrofluid-cooled voice coil and neodymium magnet, rated at 120 W peak. It is part of the Hertz Mille Pro range and is sold as a pair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the MP 25.3 (29 mm). The Mille Pro tweeter is also available as the \u003ca href=\"\/products\/hertz-mille-pro-mp-28-3-car-audio-tetolon-dome-35mm-tweeters-180w-peak-pair\"\u003eMP 28.3 (35 mm, 180 W peak)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDome: 29 mm (1.14 in) Tetolon fibre soft dome\u003c\/li\u003e\n\u003cli\u003eVoice coil: 25 mm, ferrofluid cooled\u003c\/li\u003e\n\u003cli\u003ePower handling: 120 W peak (high-pass at 2.5 kHz, 12 dB\/octave)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 1.4 kHz to 22.5 kHz\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003cli\u003eWeight: 0.07 kg per tweeter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMP 25.3 PRO\u003c\/h2\u003e\n\u003cp\u003e29 (1.14) mm (in.) | Tweeter | 120 W | 4 Ohm\u003c\/p\u003e\n\u003cp\u003eThe MP 25.3 tweeters use a Tetolon dome and 25 mm voice coil to deliver a wide, linear frequency response.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTetolon fibre soft dome for natural, detailed reproduction of musical nuances.\u003c\/li\u003e\n\u003cli\u003e\"Center Tuning Duct\" geometry for lower resonance frequency and reduced harmonic distortion.\u003c\/li\u003e\n\u003cli\u003eHigh-density flux neodymium magnet, optimised for control during high-energy dynamic transients in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e25 mm ferrofluid-cooled voice coil.\u003c\/li\u003e\n\u003cli\u003eRear chamber filled with selected damping material and sized for a lower Fs, ensuring a well-damped high-pass frequency roll-off and a low cut-off frequency crossover point.\u003c\/li\u003e\n\u003cli\u003eFEM (Finite Element Modeling) optimised faceplate geometry for high linearity in off-axis installations.\u003c\/li\u003e\n\u003cli\u003eWide range of installation accessories included for easy OEM integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \"Center Tuning Duct\", positioned at the centre of the neodymium magnetic circuit, allows air exchange between the dome and rear load chamber, fine-tuning the acoustics and achieving a very low resonance frequency. This also benefits the woofer crossover point, helping to elevate the sound stage.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712856580362,"sku":"90835","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-tweeters-hertz-mille-pro-mp-25-3-car-audio-tetolon-dome-25mm-tweeters-120w-peak-pair-47165948297482.jpg?v=1748431715"},{"product_id":"hertz-mille-pro-mp-70-3-3-inch-70mm-car-midrange-speakers-set-100w-peak-pair","title":"Hertz Mille Pro MP 70.3 3\" Inch 70mm Car Midrange Speakers Set 100w Peak Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 70.3 is a pair of 70 mm (3-inch) midrange speakers rated at 100 W peak and 4 ohms, from Hertz's Mille Pro range. They are designed for use in 3-way component systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComponent: Midrange\u003c\/li\u003e\n\u003cli\u003eSize: 70 mm (3 in)\u003c\/li\u003e\n\u003cli\u003ePower handling: 100 W peak (hi-pass filtered @ 250 Hz, 12 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 180 – 18k Hz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 20 mm CCAW double layer\u003c\/li\u003e\n\u003cli\u003eMagnet: Dual neodymium\u003c\/li\u003e\n\u003cli\u003eCone: Pressed pulp with cotton fibres\u003c\/li\u003e\n\u003cli\u003eWeight per speaker: 0.17 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMP 70.3 PRO: 70 (3) mm (in.) mid-range, 100 W, 4 ohm\u003c\/h2\u003e\n\n\u003cp\u003eThe MP 70.3 midrange speaker features a neodymium double magnet and delivers a detailed midrange. It is designed to pair with the MP 165P.3 woofer and the MP 25.3 tweeter in a 3-way component system.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSymmetrical dual neodymium magnet structure developed with FEM (Finite Element Modelling) simulations, for superior dynamics and control.\u003c\/li\u003e\n\u003cli\u003e20 mm CCAW double layer voice coil wound on a polyamide former with 8 decompression holes, for high power handling and compression-free reproduction.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® profile pressed-pulp cone with cotton fibres, combining stiffness and light weight for a wide frequency response. Geometrically optimised for linearity and dispersion in the mid-high frequency range.\u003c\/li\u003e\n\u003cli\u003e\"Boundary Free\" rubber surround for better efficiency and wider mid-bass frequency response.\u003c\/li\u003e\n\u003cli\u003eAnti-vibration rubber magnet cover to damp spurious vibrations; removable for installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003eAcoustically transparent aluminium alloy basket with diamond cutting and the aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eFull protection metal mesh grille with aluminium Hertz logo and mineral powder coated inner grille included, for several installation combinations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 20 mm coil maximises dynamics, the V-cone® profile enhances off-axis dispersion, and the Boundary Free surround allows wider extension towards the low frequency range.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712857104650,"sku":"90841","price":159.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-speakers-hertz-mille-pro-mp-70-3-3-inch-70mm-car-midrange-speakers-set-100w-peak-pair-47165949804810.jpg?v=1748431725"},{"product_id":"hertz-mille-pro-mp-165-3-6-5-inch-16-5cm-car-midrange-woofer-speaker-90w-pair","title":"Hertz Mille Pro MP 165.3 6.5 Inch 16.5cm Car Midrange Woofer Speaker 90w Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 165.3 is a 6.5-inch (165mm) car audio midrange woofer pair rated at 90W continuous and 180W peak at 4 ohms, featuring V-cone and Boundary Free Surround technologies. Part of the Hertz Mille Pro range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComponent: woofer, 165mm (6.5\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 90W continuous, 180W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40Hz to 5kHz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 25mm (1\")\u003c\/li\u003e\n\u003cli\u003eXmech: ±7mm\u003c\/li\u003e\n\u003cli\u003eMagnet: high density flux ferrite\u003c\/li\u003e\n\u003cli\u003eWeight: 1.07kg per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMP 165.3 Pro: 165mm (6.5\") woofer, 180W, 4 ohm\u003c\/h2\u003e\n\u003cp\u003eHigh power handling, extreme dynamics and a realistic sound stage.\u003c\/p\u003e\n\u003cp\u003eV-cone and Boundary Free Surround technologies give the MP 165.3 outstanding dispersion and high SPL from compact dimensions, delivering a wide low-frequency response — even in cars with no space for a subwoofer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePure copper voice coil wound on a polyamide former for high power handling and very low intermodulation distortion.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone pressed-pulp cone with cotton fibres — stiff and lightweight for a wide frequency response.\u003c\/li\u003e\n\u003cli\u003eCone profile geometrically optimised for linearity and dispersion in the mid-frequency range.\u003c\/li\u003e\n\u003cli\u003eBoundary Free rubber surround for improved efficiency and wider mid-bass frequency.\u003c\/li\u003e\n\u003cli\u003eHigh density flux ferrite magnet with very low carbon content iron plates for low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eLow mounting depth, acoustically transparent aluminium alloy basket with diamond cutting and aluminium Hertz logo.\u003c\/li\u003e\n\u003cli\u003eOptional full protection metal mesh grille with aluminium Hertz logo and mineral powder coated inner grille included, supporting several install combinations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712858022154,"sku":"90833","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mp-165-3-6-5-inch-16-5cm-car-midrange-woofer-speaker-90w-pair-47165952721162.jpg?v=1748431703"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/collections\/car_speakers.jpg?v=1770889237","url":"https:\/\/www.cen.uk\/collections\/speakers.oembed?page=29","provider":"CEN","version":"1.0","type":"link"}