{"title":"JL Audio Subwoofers","description":"\u003cp\u003eShop a wide range of JL Audio subwoofers at CEN, delivering deep, powerful bass for your car audio system. Known for their high-performance design and premium sound quality, these subwoofers offer unmatched reliability. Whether you’re upgrading your car's audio system or building a custom setup, JL Audio subwoofers provide the ultimate audio experience. Get free UK mainland delivery and flexible payment options. Perfect for enthusiasts seeking serious sound and durability.\u003c\/p\u003e","products":[{"product_id":"jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1","title":"JL Audio 8W3V3-4 8\" 20cm W3 Series Car Sub Subwoofer Driver 4ohm 250w RMS","description":"\u003cp\u003e\u003cstrong\u003e8W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e8-inch (200 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 8-inch Subwoofer Driver (250 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.375 in. (10 mm) of controlled, one-way, linear excursion.\u003c\/p\u003e\n\u003cp\u003eThe 8W3v3-4 is best used with amplifier power in the 75W - 250W range and is optimized to operate in a tiny 0.30 cu. ft. (8.5 l) sealed enclosure, or a 0.35 cu. ft. (9.9 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713126457610,"sku":"90944","price":299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-47166355767562.jpg?v=1748431410"},{"product_id":"jl-audio-12w3v3-4-12-30cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-1","title":"JL Audio 12W3v3-4 12\" 30cm W3 Series Car Sub Subwoofer Driver 4ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 12-inch Subwoofer (500 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W3v3-4 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.125 cu. ft. (31.8 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713127178506,"sku":"90934","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w3v3-4-12-30cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-47166357143818.jpg?v=1748429621"},{"product_id":"jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-1","title":"JL Audio 12W3v3-2 12\" 30cm W3 Series Car Sub Subwoofer Driver 2ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W3v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 12-inch Subwoofer (500 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713127801098,"sku":"90933","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-47166358159626.jpg?v=1748429627"},{"product_id":"jl-audio-cp108lg-w3v3-sub-8-microsub-ported-subwoofer-enclosure-250w-rms-1","title":"JL Audio CP108LG-W3V3 Sub 8\" MicroSub Ported Subwoofer Enclosure 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP108LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 8W3v3 MicroSub, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 8W3v3-4 Subwoofer Driver, Black Carpet (250 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCP108LG Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThis incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design.\u003c\/p\u003e\n\u003cp\u003eExtensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 100 - 250W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713136320778,"sku":"90986","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp108lg-w3v3-sub-8-microsub-ported-subwoofer-enclosure-250w-rms-47166368579850.jpg?v=1748429601"},{"product_id":"jl-audio-cp110-w0v3-sub-10-single-w0-basswedge-ported-subwoofer-300w-rms","title":"JL Audio CP110-W0V3 Sub 10\" Single W0 BassWedge Ported Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP110-W0v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10W0v3 BassWedge, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.\u003c\/p\u003e\n\u003cp\u003eThe ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth.\u003c\/p\u003e\n\u003cp\u003eConstruction: MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 75 - 300W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713138286858,"sku":"90987","price":249.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp110-w0v3-sub-10-single-w0-basswedge-ported-subwoofer-300w-rms-55022528397578.jpg?v=1748429602"},{"product_id":"jl-audio-cp112-w0v3-sub-12-single-w0-basswedge-ported-subwoofer-300w-rms","title":"JL Audio CP112-W0V3 Sub 12\" Single W0 BassWedge Ported Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP112-W0v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12W0v3 BassWedge, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 12W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.\u003c\/p\u003e\n\u003cp\u003eThe ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth.\u003c\/p\u003e\n\u003cp\u003eConstruction: MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 75 - 300W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713139761418,"sku":"90988","price":309.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp112-w0v3-sub-12-single-w0-basswedge-ported-subwoofer-300w-rms-47166371397898.jpg?v=1748429589"},{"product_id":"jl-audio-cp212-w0v3-12-30cm-dual-12w0v3-basswedge-ported-subwoofer-600w-rms-1","title":"JL Audio CP212-W0v3 12\" 30cm Dual 12W0v3 BassWedge Ported Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP212-WØv3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDual 12W0v3 BassWedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Dual 12W0v3-4 Subwoofers, Dark Gray Carpet (600 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.\u003c\/p\u003e\n\u003cp\u003eThe ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth.\u003c\/p\u003e\n\u003cp\u003eConstruction: MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 150 - 600W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713141203210,"sku":"90991","price":729.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp212-w0v3-12-30cm-dual-12w0v3-basswedge-ported-subwoofer-600w-rms-47166373232906.jpg?v=1748429591"},{"product_id":"jl-audio-12w0v3-4-12-30cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 12W0v3-4 12\" 30cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W0v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWØv3 12-inch Subwoofer Driver (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 12WØv3 is a rugged performer with excellent efficiency, excursion capability and linearity. Its overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12WØv3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713141956874,"sku":"90930","price":189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w0v3-4-12-30cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166374215946.jpg?v=1748429583"},{"product_id":"jl-audio-cp106lg-w3v3-sub-6-microsub-slot-ported-subwoofer-enclosure-150w-rms","title":"JL Audio CP106LG-W3V3 Sub 6\" MicroSub Slot Ported Subwoofer Enclosure 150w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP106LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 6W3v3 MicroSub, Ported, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 6W3v3-4 Subwoofer Drivers, Black Carpet (150 W, 4 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design.\u003c\/p\u003e\n\u003cp\u003eExtensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 50 - 150W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 4 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713142874378,"sku":"90985","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp106lg-w3v3-sub-6-microsub-slot-ported-subwoofer-enclosure-150w-rms-47166376050954.jpg?v=1748429577"},{"product_id":"jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 12W1v3-4 12\" 30cm W1 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W1v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW1v3 12-inch Subwoofer Driver (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eW1v3 Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThe 12W1v3 is a lightweight 12-inch driver with excellent performance capabilities at moderate power levels. It features moderate mounting depth with no pole-vent, so the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe The 12W1v3-4 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713143857418,"sku":"90932","price":264.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166378705162.jpg?v=1748429574"},{"product_id":"jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms","title":"JL Audio 12W1v3-2 12\" 30cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W1v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW1v3 12-inch Subwoofer Driver (300 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eW1v3 Product Spotlight\u003c\/p\u003e\n\u003cp\u003eThe 12W1v3 is a lightweight 12-inch driver with excellent performance capabilities at moderate power levels. It features moderate mounting depth with no pole-vent, so the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W1v3-2 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 1.10 cu. ft. (31.5 l) sealed enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713149657354,"sku":"90931","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms-47166389846282.jpg?v=1748429566"},{"product_id":"jl-audio-ho110-w6v3-subwoofer-10-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms","title":"JL Audio HO110-W6V3 Subwoofer 10 Inch W6 HO Wedge Ported Sub Enclosure 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eHO110-W6v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10W6v3 H.O. Wedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10W6v3-D4 Subwoofer, Dark Gray \/ Black Carpet (600 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO110-W6v3, the high power handling of the 10W6v3 Subwoofer, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W6v3, and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-10W6v2\/v3), if additional woofer protection is desired.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. \"JL AUDIO\" is embroidered in silver on the side surface of the enclosure.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 200 - 600W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713201398026,"sku":"91008","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho110-w6v3-subwoofer-10-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms-47166431527178.jpg?v=1748429286"},{"product_id":"jl-audio-acp208lg-w3v3-dual-8-active-subwoofer-microsub-amplifier-500w-rms","title":"JL Audio ACP208LG-W3V3 Dual 8” Active Subwoofer MicroSub+ Amplifier 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP208LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDual 8W3v3 MicroSub+™ with DCD™ Amplifier, Ported, 0.20 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Dual 8W3v3-0.40 Subwoofers, Built-In 500W Class D Amplifier, Black Carpet - Ported Enclosure\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 drivers. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its dual 8Wv3 Subwoofers, each in its separate airspace. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries\/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through each port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. Steel mesh grilles are included to protect the Subwoofers.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (500 W @ 0.20 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.20 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofers Built in USA with global components.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713201791242,"sku":"90949","price":949.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acp208lg-w3v3-dual-8-active-subwoofer-microsub-amplifier-500w-rms-47166433984778.jpg?v=1748429278"},{"product_id":"jl-audio-acp108lg-w3v3-8-active-subwoofer-microsub-dcd-amplifier-250w-rms","title":"JL Audio ACP108LG-W3V3 8” Active Subwoofer MicroSub+ DCD Amplifier 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP108LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 8W3v3 MicroSub+™ with DCD™ Amplifier, Ported, 0.40 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 8W3v3-0.40 Subwoofer, Built-In 250W Class D Amplifier, Black Carpet - Ported Enclosure\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance W3v3 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 8Wv3 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (250 W @ 0.40 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.40 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components.\u2028\u2028\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713202577674,"sku":"90946","price":559.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acp108lg-w3v3-8-active-subwoofer-microsub-dcd-amplifier-250w-rms-47166437622026.jpg?v=1748429281"},{"product_id":"jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms","title":"JL Audio ACP110LG-TW1 10” Active Subwoofer MicroSub+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP110LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10TW1 MicroSub+™ with DCD™ Amplifier, Ported, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713203265802,"sku":"90947","price":699.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms-47166440866058.jpg?v=1748429296"},{"product_id":"jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms","title":"JL Audio ACP112LG-TW1 12” Active Subwoofer MicroSub+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACP112LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12TW1 MicroSub+™ with DCD™ Amplifier, Ported, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith MicroSub+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eKey to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 12TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSub™ systems, these amplified versions produce the kind of output and extension normally associated with much larger systems.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713203429642,"sku":"90948","price":759.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms-47166442045706.jpg?v=1748429290"},{"product_id":"jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms","title":"JL Audio ACS110LG-TW1  10” Active Subwoofer PowerWedge+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACS110LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10TW1 PowerWedge+™ with DCD™ Amplifier, Sealed, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Sealed Enclosure\u2028\u2028\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eHarnessing the performance and insanely small box requirements of the TW1 Subwoofer, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 5 inches (127 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW1 driver and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer Built in USA with global components\u2028\u2028\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713204052234,"sku":"90950","price":649.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms-47166442963210.jpg?v=1748429265"},{"product_id":"jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms","title":"JL Audio ACS112LG-TW1  12” Active Subwoofer PowerWedge+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eACS112LG-TW1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12TW1 PowerWedge+™ with DCD™ Amplifier, Sealed, 0.25 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet - Sealed Enclosure\u2028\u2028\u2028\u2028\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.\u003c\/p\u003e\n\u003cp\u003eHarnessing the performance and insanely small box requirements of the TW1 Subwoofer, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 6.625 in. (168 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW1 driver and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eIntegration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.\u003c\/p\u003e\n\u003cp\u003eNote: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 0.25 Ω\u003c\/p\u003e\n\u003cp\u003eEnclosure and Subwoofer built in USA with global components\u2028\u2028\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713207623946,"sku":"90951","price":699.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms-47166444568842.jpg?v=1748429258"},{"product_id":"jl-audio-cs112tg-tw3-subwoofer-12-tw3-powerwedge-sealed-sub-enclosure-400w-rms","title":"JL Audio CS112TG-TW3 Subwoofer 12\" TW3 PowerWedge Sealed Sub Enclosure 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eCS112TG-TW3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12TW3 Truck PowerWedge, Sealed, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 12TW3-D4 Subwoofer, Black Carpet (400 W, 2 Ω) - Sealed Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 12TW3 to deliver amazing sub-bass from an enclosure that is only 7 in. (178 mm) deep at its base and 4.5 in. (114 mm) at the top.\u003c\/p\u003e\n\u003cp\u003eThis enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW3 and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with \"JL AUDIO\" embroidered in silver on the front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 100 - 400W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713210540298,"sku":"90997","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs112tg-tw3-subwoofer-12-tw3-powerwedge-sealed-sub-enclosure-400w-rms-47166448959754.jpg?v=1748429244"},{"product_id":"jl-audio-cs110tg-tw3-subwoofer-10-tw3-powerwedge-sealed-sub-enclosure-400w-rms","title":"JL Audio CS110TG-TW3 Subwoofer 10\" TW3 PowerWedge Sealed Sub Enclosure 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eCS110TG-TW3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10TW3 Truck PowerWedge, Sealed, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10TW3-D4 Subwoofer, Black Carpet (400 W, 2 Ω) - Sealed Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top.\u003c\/p\u003e\n\u003cp\u003eThis enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with \"JL AUDIO\" embroidered in silver on the front baffle. A steel mesh grille is included to protect the Subwoofer.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 100 - 400W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713210704138,"sku":"90994","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs110tg-tw3-subwoofer-10-tw3-powerwedge-sealed-sub-enclosure-400w-rms-47166449647882.jpg?v=1748429246"},{"product_id":"jl-audio-ho110rg-w3v3-subwoofer-10-inch-ho-wedge-ported-sub-enclosure-500w-rms","title":"JL Audio HO110RG-W3V3 Subwoofer 10 Inch HO Wedge Ported Sub Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eHO110RG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10W3v3 H.O. Wedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10W3v3-2 Subwoofer, Dark Gray \/ Black Carpet (500 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver.\u003c\/p\u003e\n\u003cp\u003eThis enclosure design has been carefully engineered to the optimum ported alignment for the 10W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500 W of power.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection.\u003c\/p\u003e\n\u003cp\u003eThe angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. \"JL AUDIO\" is embroidered in silver on the top surface of the enclosure.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 150 - 500W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713211359498,"sku":"91009","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho110rg-w3v3-subwoofer-10-inch-ho-wedge-ported-sub-enclosure-500w-rms-47166451482890.jpg?v=1748429250"},{"product_id":"jl-audio-ho112rg-w3v3-subwoofer-12-inch-ho-wedge-ported-sub-enclosure-500w-rms","title":"JL Audio HO112RG-W3V3 Subwoofer 12 Inch HO Wedge Ported Sub Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eHO112RG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12W3v3 H.O. Wedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 12W3v3-2 Subwoofer, Dark Gray \/ Black Carpet (500 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver.\u003c\/p\u003e\n\u003cp\u003eThis enclosure design has been carefully engineered to the optimum ported alignment for the 12W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500 W of power.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection.\u003c\/p\u003e\n\u003cp\u003eThe angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. \"JL AUDIO\" is embroidered in silver on the top surface of the enclosure.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 150 - 500W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713211588874,"sku":"91012","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho112rg-w3v3-subwoofer-12-inch-ho-wedge-ported-sub-enclosure-500w-rms-47166453055754.jpg?v=1748429247"},{"product_id":"jl-audio-ho112-w6v3-subwoofer-12-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms","title":"JL Audio HO112-W6V3 Subwoofer 12 Inch W6 HO Wedge Ported Sub Enclosure 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eHO112-W6v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12W6v3 H.O. Wedge, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 12W6v3-D4 Subwoofer, Dark Gray \/ Black Carpet (600 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. In the HO112-W6v3, the high power handling of the 12W6v3 Subwoofer, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W6v3, and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer. A steel mesh woofer grille insert can be purchased separately (Model: SGR-12W6v2\/v3), if additional woofer protection is desired.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. \"JL AUDIO\" is embroidered in silver on the side surface of the enclosure.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 200 - 600W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713215881482,"sku":"91010","price":1119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho112-w6v3-subwoofer-12-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms-47166462558474.jpg?v=1748429193"},{"product_id":"jl-audio-ho112r-w7ae-subwoofer-12-inch-w7-ho-wedge-sub-enclosure-1000w-rms","title":"JL Audio HO112R-W7AE Subwoofer 12 Inch W7 HO Wedge Sub Enclosure 1000w RMS","description":"\u003cp\u003e\u003cstrong\u003eHO112R-W7AE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 12W7AE H.O. Wedge, Ported, 3 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 12W7AE-3 Subwoofer, Dark Gray \/ Black Carpet (1000 W, 3 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W7AE driver.\u003c\/p\u003e\n\u003cp\u003eThis enclosure design has been carefully engineered to the optimum ported alignment for the 12W7AE-3 and has been fine-tuned through extensive real-world listening. The high power handling of the 12W7AE, combined with the efficiency of this subwoofer system, produce a devastating performance combination.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer.\u003c\/p\u003e\n\u003cp\u003eThe angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.\u003c\/p\u003e\n\u003cp\u003eFinish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. \"JL AUDIO\" is embroidered in silver on the top surface of the enclosure.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 400 - 1000W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 3 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713216504074,"sku":"91011","price":1629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho112r-w7ae-subwoofer-12-inch-w7-ho-wedge-sub-enclosure-1000w-rms-47166463443210.jpg?v=1748429181"},{"product_id":"jl-audio-10tw3-d4-10-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms","title":"JL Audio 10TW3-D4 10 Inch TW3 Series Shallow Mount Subwoofer Dual 4 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003e10TW3-D4 Shallow Mount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, Dual 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW3 10-inch Subwoofer (400 W, dual 4 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.\u003c\/p\u003e\n\u003cp\u003eTo allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eTW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.\u003c\/p\u003e\n\u003cp\u003eDeep, powerful and accurate JL Audio bass is now possible in more applications than ever.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (3.25 \/ 3.50 Inches)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure.\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion capability (0.60 In \/ 15.2 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor designs\u003c\/li\u003e\n\u003cli\u003e“concentric tube” architecture\u003c\/li\u003e\n\u003cli\u003ePatented “floating cone attach method” technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminum-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713245208842,"sku":"90917","price":409.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw3-d4-10-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms-47166517346570.jpg?v=1748429735"},{"product_id":"jl-audio-10tw3-d8-10-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms","title":"JL Audio 10TW3-D8 10 Inch TW3 Series Shallow Mount Subwoofer Dual 8 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003e10TW3-D8 Shallow Mount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, Dual 8 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW3 10-inch Subwoofer (400 W, dual 8 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.\u003c\/p\u003e\n\u003cp\u003eTo allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eTW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.\u003c\/p\u003e\n\u003cp\u003eDeep, powerful and accurate JL Audio bass is now possible in more applications than ever.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (3.25 \/ 3.50 Inches)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure.\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion capability (0.60 In \/ 15.2 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor designs\u003c\/li\u003e\n\u003cli\u003e“concentric tube” architecture\u003c\/li\u003e\n\u003cli\u003ePatented “floating cone attach method” technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminum-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713246847242,"sku":"90918","price":409.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw3-d8-10-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms-47166519738634.jpg?v=1748429729"},{"product_id":"jl-audio-12tw3-d4-12-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms","title":"JL Audio 12TW3-D4 12 Inch TW3 Series Shallow Mount Subwoofer Dual 4 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003e12TW3-D4 Shallow Mount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, Dual 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW3 12-inch Subwoofer (400 W, dual 4 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.\u003c\/p\u003e\n\u003cp\u003eTo allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eTW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.\u003c\/p\u003e\n\u003cp\u003eDeep, powerful and accurate JL Audio bass is now possible in more applications than ever.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (3.25 \/ 3.50 Inches)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure.\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion capability (0.60 In \/ 15.2 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor designs\u003c\/li\u003e\n\u003cli\u003e“concentric tube” architecture\u003c\/li\u003e\n\u003cli\u003ePatented “floating cone attach method” technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminum-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713248911626,"sku":"90928","price":479.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw3-d4-12-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms-47166521016586.jpg?v=1748429742"},{"product_id":"jl-audio-12tw3-d8-12-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms","title":"JL Audio 12TW3-D8 12 Inch TW3 Series Shallow Mount Subwoofer Dual 8 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003e12TW3-D8 Shallow Mount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, Dual 8 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW3 12-inch Subwoofer (400 W, dual 8 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilding on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.\u003c\/p\u003e\n\u003cp\u003eTo allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eTW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.\u003c\/p\u003e\n\u003cp\u003eDeep, powerful and accurate JL Audio bass is now possible in more applications than ever.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (3.25 \/ 3.50 Inches)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure.\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion capability (0.60 In \/ 15.2 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor designs\u003c\/li\u003e\n\u003cli\u003e“concentric tube” architecture\u003c\/li\u003e\n\u003cli\u003ePatented “floating cone attach method” technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminum-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713249763594,"sku":"90929","price":419.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw3-d8-12-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms-47166523834634.jpg?v=1748429730"},{"product_id":"jl-audio-10tw1-4-10-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms","title":"JL Audio 10TW1-4 10 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e10TW1-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW1 10-inch Subwoofer (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. \/ 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a \"concentric tube\" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eThe 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.\u003c\/p\u003e\n\u003cp\u003eEven though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (4.36 in \/ 111 mm)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eLong linear excursion capability (0.40 in \/ 10 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included with each driver\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713251139850,"sku":"90916","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw1-4-10-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms-47166525145354.jpg?v=1748429713"},{"product_id":"jl-audio-10tw1-2-10-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms","title":"JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e10TW1-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW1 10-inch Subwoofer (300 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. \/ 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a \"concentric tube\" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eThe 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.\u003c\/p\u003e\n\u003cp\u003eEven though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (4.36 in \/ 111 mm)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eLong linear excursion capability (0.40 in \/ 10 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included with each driver\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713252090122,"sku":"90915","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw1-2-10-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms-47166527471882.jpg?v=1748429706"},{"product_id":"jl-audio-12tw1-4-12-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms","title":"JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12TW1-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW1 12-inch Subwoofer (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.65 cu.ft. \/ 18.4 liters). This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented thin-line woofer technology compresses the architecture of the 12TW1 using a \"concentric tube\" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eThe 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.\u003c\/p\u003e\n\u003cp\u003eEven though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (4.62 in \/ 117 mm)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eLong linear excursion capability (0.40 in \/ 10 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included with each driver\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713252286730,"sku":"90927","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw1-4-12-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms-47166528815370.jpg?v=1748429719"},{"product_id":"jl-audio-12tw1-2-12-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms","title":"JL Audio 12TW1-2 12 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e12TW1-2 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW1 12-inch Subwoofer (300 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.65 cu.ft. \/ 18.4 liters). This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented thin-line woofer technology compresses the architecture of the 12TW1 using a \"concentric tube\" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.\u003c\/p\u003e\n\u003cp\u003eThe 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.\u003c\/p\u003e\n\u003cp\u003eEven though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (4.62 in \/ 117 mm)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to rear wall of enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eLong linear excursion capability (0.40 in \/ 10 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimized motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection molded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included with each driver\u003c\/li\u003e\n\u003cli\u003ePrecision-built in USA at JL Audio’s Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713253794058,"sku":"90926","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw1-2-12-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms-47166529929482.jpg?v=1748429718"},{"product_id":"jl-audio-13tw5v2-4-13-5-inch-tw5-series-shallow-mount-subwoofer-4-ohm-600w-rms","title":"JL Audio 13TW5v2-4 13.5 Inch TW5 Series Shallow Mount Subwoofer 4 ohm 600w RMS","description":"\u003cp\u003e\u003cstrong\u003e13TW5v2-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e13.5-inch (345 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW5v2 13.5-inch Subwoofer (600 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe couldn’t leave the ultimate thin woofer alone... we had to make it even better.\u003c\/p\u003e\n\u003cp\u003eOur patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a “concentric tube” structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.\u003c\/p\u003e\n\u003cp\u003eTo unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.\u003c\/p\u003e\n\u003cp\u003eIn keeping with its “tight-spaces” mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.\u003c\/p\u003e\n\u003cp\u003eThe 13TW5v2 is best used with amplifier power in the 250W - 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eNever has such high-quality sub-bass been possible in the most challenging installation applications.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713254220042,"sku":"90938","price":849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-13tw5v2-4-13-5-inch-tw5-series-shallow-mount-subwoofer-4-ohm-600w-rms-47166531174666.jpg?v=1748429682"},{"product_id":"jl-audio-13tw5v2-2-13-5-inch-tw5-series-shallow-mount-subwoofer-2-ohm-600w-rms","title":"JL Audio 13TW5v2-2 13.5 Inch TW5 Series Shallow Mount Subwoofer 2 ohm 600w RMS","description":"\u003cp\u003e\u003cstrong\u003e13TW5v2-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e13.5-inch (345 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTW5v2 13.5-inch Subwoofer (600 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe couldn’t leave the ultimate thin woofer alone... we had to make it even better.\u003c\/p\u003e\n\u003cp\u003eOur patented thin-line woofer technology compresses the architecture of the 13TW5v2 using a “concentric tube” structure that supports the 7-inch diameter voice coil and the suspension attachments. This permits placement of the large motor structure much further forward in the speaker than with conventional designs, while allowing excellent linear excursion capability and mechanical stability.\u003c\/p\u003e\n\u003cp\u003eTo unleash even more performance from this technology, the v2 improves upon the original 13TW5 with 13% greater linear excursion capability. The cast alloy chassis has also been modified for greater strength and the redesigned motor now features an annular vent. The v2 is also available in single 2 ohm and single 4 ohm voice coil versions to fit a wide range of applications.\u003c\/p\u003e\n\u003cp\u003eIn keeping with its “tight-spaces” mission, the 13TW5v2 is optimized for enclosures that are far smaller than most 12-inch woofers require and only a bit larger than the air space needs of a typical, small-box 10-inch woofer. The mounting system is designed to fit in about the same footprint as a typical 12-inch woofer.\u003c\/p\u003e\n\u003cp\u003eThe 13TW5v2 is best used with amplifier power in the 250W - 600W range and is optimized to operate in a 0.80 cu. ft. (22.7 l) sealed enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eNever has such high-quality sub-bass been possible in the most challenging installation applications.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713254351114,"sku":"90937","price":849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-13tw5v2-2-13-5-inch-tw5-series-shallow-mount-subwoofer-2-ohm-600w-rms-47166531928330.jpg?v=1748429674"},{"product_id":"jl-audio-8w7ae-3-w7-series-anniversary-edition-8-inch-sub-subwoofer-500w-rms","title":"JL Audio 8W7AE-3 W7 Series Anniversary Edition 8 Inch Sub Subwoofer 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e8W7AE-3 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e8-inch (200 mm) Subwoofer Driver, 3 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10th Anniversary Edition - W7 8-inch Subwoofer (500 W, 3 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Subwoofer has been called the \"best damn 8-inch subwoofer ever made\" for its remarkable performance capabilities and design attributes. An impressive linear excursion envelope that exceeds 0.75 in. (19 mm) one-way allows it to deliver impact well beyond the range of other 8-inch Subwoofers.\u003c\/p\u003e\n\u003cp\u003eThe 8W7AE is best used with amplifier power in the 200W - 500W range and is optimized to operate in a 0.875 cu. ft. (24.8 l) sealed enclosure, or a 1.0 cu. ft. (28.3 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eW7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-Black Powdercoated Baskets\u003c\/li\u003e\n\u003cli\u003eBright Anodized Surround Clamp Ring\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Cone Badge\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Terminal Label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eW-Cone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe W-Cone is a unit-body cone assembly that delivers astonishing cone stiffness with minimal mass. The shape also provides superb torsional rigidity, which is critical to maintaining voice coil alignment at the suspension limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadially Cross-Drilled Pole-Piece\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis innovative venting system greatly enhances thermal dissipation and power handling by directing air flow onto the voice coil former, working in conjunction with the Elevated Frame cooling technology to effectively remove heat from the voice coil. This improves power handling and reduces power compression effects, leading to more linear performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered Lead-Wire System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713268736266,"sku":"90945","price":679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-8w7ae-3-w7-series-anniversary-edition-8-inch-sub-subwoofer-500w-rms-47166554538250.jpg?v=1748431532"},{"product_id":"jl-audio-10w7ae-3-w7-series-anniversary-edition-10-inch-sub-subwoofer-750w-rms","title":"JL Audio 10W7AE-3 W7 Series Anniversary Edition 10 Inch Sub Subwoofer 750w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W7AE-3 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 3 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10th Anniversary Edition - W7 10-inch Subwoofer (750 W, 3 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are seeking reference-grade sub-bass from a 10-inch driver, your search ends here. Total Car Audio in the UK called it like this when they reviewed the 10W7: \"This gives an all round performance of such high quality on every level, that bettering it will be very hard to achieve.\" Not only does the 10W7 deliver amazing excursion capability for its size, but it also maintains complete composure under power and is able to track complex bass material with uncanny accuracy and power.\u003c\/p\u003e\n\u003cp\u003eThe 10W7AE is best used with amplifier power in the 300W - 750W range and is optimized to operate in a 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.5 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eW7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but they are distinguished by the following cosmetic differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-Black Powdercoated Baskets\u003c\/li\u003e\n\u003cli\u003eBright Anodized Surround Clamp Ring\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Cone Badge\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Terminal Label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eW-Cone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe W-Cone is a unit-body cone assembly that delivers astonishing cone stiffness with minimal mass. The shape also provides superb torsional rigidity, which is critical to maintaining voice coil alignment at the suspension limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadially Cross-Drilled Pole-Piece\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis innovative venting system greatly enhances thermal dissipation and power handling by directing air flow onto the voice coil former, working in conjunction with the Elevated Frame cooling technology to effectively remove heat from the voice coil. This improves power handling and reduces power compression effects, leading to more linear performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered Lead-Wire System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713269686538,"sku":"90925","price":929.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w7ae-3-w7-series-anniversary-edition-10-inch-sub-subwoofer-750w-rms-47166554931466.jpg?v=1748431526"},{"product_id":"jl-audio-12w7ae-3-w7-series-anniversary-edition-12-inch-sub-subwoofer-1000w-rms","title":"JL Audio 12W7AE-3 W7 Series Anniversary Edition 12 Inch Sub Subwoofer 1000w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W7AE-3 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, 3 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10th Anniversary Edition - W7 12-inch Subwoofer (1000 W, 3 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 12W7AE brings serious performance to the table by combining the breakthrough of the long-excursion W7 design with a large 12-inch bore. It has been called \"addictive,\" \"seductive\" and \"the new subwoofer reference\", by some of the world's toughest reviewers, and has earned these accolades by delivering nearly limitless dynamics, exceptional balance and world-class sound quality.\u003c\/p\u003e\n\u003cp\u003eThis potent driver is best used with amplifier power in the 400W - 1000W range and is optimized to operate in a 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eW7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-Black Powdercoated Baskets\u003c\/li\u003e\n\u003cli\u003eBright Anodized Surround Clamp Ring\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Cone Badge\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Terminal Label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eW-Cone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe W-Cone is a unit-body cone assembly that delivers astonishing cone stiffness with minimal mass. The shape also provides superb torsional rigidity, which is critical to maintaining voice coil alignment at the suspension limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadially Cross-Drilled Pole-Piece\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis innovative venting system greatly enhances thermal dissipation and power handling by directing air flow onto the voice coil former, working in conjunction with the Elevated Frame cooling technology to effectively remove heat from the voice coil. This improves power handling and reduces power compression effects, leading to more linear performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered Lead-Wire System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713270014218,"sku":"90936","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w7ae-3-w7-series-anniversary-edition-12-inch-sub-subwoofer-1000w-rms-47166555848970.jpg?v=1748431525"},{"product_id":"jl-audio-13w7ae-d1-5-w7-series-anniversary-edition-13-5-inch-subwoofer-1500w-rms","title":"JL Audio 13W7AE-D1.5 W7 Series Anniversary Edition 13.5 Inch Subwoofer 1500w RMS","description":"\u003cp\u003e\u003cstrong\u003e13W7AE-D1.5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e13.5-inch (345 mm) Subwoofer Driver, Dual 1.5 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10th Anniversary Edition - W7 13.5-inch Subwoofer (1500 W, Dual 1.5 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWords like \"extreme,\" \"reference\" and \"ultimate\" get thrown around quite a bit in the Subwoofer world, but rare is the product that can honestly lay claim to them. The 13W7AE does.\u003c\/p\u003e\n\u003cp\u003eTaking the W7 design formula to its highest level, the 13W7AE offers a staggering linear excursion envelope that exceeds 1.25 inches (32 mm) one-way, along with a suspension capable of over 4-inches of peak-to-peak excursion. Combine that with a piston diameter that is 28% larger than the 12W7AE's, and you have a serious high-performance driver for the most demanding applications. With a 13W7AE, limits simply vanish and amazing sub-bass happens... on all fronts, at any level.\u003c\/p\u003e\n\u003cp\u003eOur most potent Subwoofer is best used with amplifier power in the 500W - 1500W range and is optimized to operate in a 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.375 cu. ft. (67.3 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eW7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-Black Powdercoated Baskets\u003c\/li\u003e\n\u003cli\u003eBright Anodized Surround Clamp Ring\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Cone Badge\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition Terminal Label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eW-Cone\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe W-Cone is a unit-body cone assembly that delivers astonishing cone stiffness with minimal mass. The shape also provides superb torsional rigidity, which is critical to maintaining voice coil alignment at the suspension limits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverRoll™ Surround\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy utilizing space wasted in conventional speakers, this ground-breaking innovation controls the W7's massive excursion without sacrificing precious cone area.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadially Cross-Drilled Pole-Piece\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis innovative venting system greatly enhances thermal dissipation and power handling by directing air flow onto the voice coil former, working in conjunction with the Elevated Frame cooling technology to effectively remove heat from the voice coil. This improves power handling and reduces power compression effects, leading to more linear performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered Lead-Wire System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarefully engineered lead-wire design and attachments ensure controlled, quiet lead-wire behavior under the most extreme excursion demands.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713271423242,"sku":"90941","price":1699.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-13w7ae-d1-5-w7-series-anniversary-edition-13-5-inch-subwoofer-1500w-rms-47166557257994.jpg?v=1748431520"},{"product_id":"jl-audio-10w6v3-d4-w6-series-10-inch-25cm-dual-4-ohm-car-sub-subwoofer-600w-rms","title":"JL Audio 10W6V3-D4 W6 Series 10 Inch 25cm Dual 4 ohm Car Sub Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W6v3-D4 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, Dual 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW6v3 10-inch Subwoofer (600 W, dual 4 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.\u003c\/p\u003e\n\u003cp\u003eThe 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eGreater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePole-Vent Airflow Control - PVAC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn high-powered Subwoofers, thermal management is essential.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713271619850,"sku":"90924","price":699.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w6v3-d4-w6-series-10-inch-25cm-dual-4-ohm-car-sub-subwoofer-600w-rms-47166558241034.jpg?v=1748431512"},{"product_id":"jl-audio-12w6v3-d4-w6-series-12-inch-30cm-dual-4-ohm-car-sub-subwoofer-600w-rms","title":"JL Audio 12W6V3-D4 W6 Series 12 Inch 30cm Dual 4 ohm Car Sub Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003e12W6v3-D4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e12-inch (300 mm) Subwoofer Driver, Dual 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW6v3 12-inch Subwoofer (600 W, dual 4 Ω voice coils)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.\u003c\/p\u003e\n\u003cp\u003eThe 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003eGreater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePole-Vent Airflow Control - PVAC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn high-powered Subwoofers, thermal management is essential.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713272307978,"sku":"90935","price":759.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w6v3-d4-w6-series-12-inch-30cm-dual-4-ohm-car-sub-subwoofer-600w-rms-47166559748362.jpg?v=1748431514"},{"product_id":"jl-audio-10w3v3-4-10-25cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms","title":"JL Audio 10W3v3-4 10\" 25cm W3 Series Car Sub Subwoofer Driver 4ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 10-inch Subwoofer (500 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 10W3v3-4 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713278337290,"sku":"90923","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w3v3-4-10-25cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-47166565810442.jpg?v=1748429020"},{"product_id":"jl-audio-10w3v3-2-10-25cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms","title":"JL Audio 10W3v3-2 10\" 25cm W3 Series Car Sub Subwoofer Driver 2ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W3v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 10-inch Subwoofer (500 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 10W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713280401674,"sku":"90922","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w3v3-2-10-25cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-47166566793482.jpg?v=1748429019"},{"product_id":"jl-audio-6w3v3-4-6-5-16-5cm-w3-series-car-sub-subwoofer-driver-4ohm-150w-rms","title":"JL Audio 6W3V3-4 6.5\" 16.5cm W3 Series Car Sub Subwoofer Driver 4ohm 150w RMS","description":"\u003cp\u003e\u003cstrong\u003e6W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e6.5-inch (165 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 6.5-inch Subwoofer (150 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion.\u003c\/p\u003e\n\u003cp\u003eThe 6W3v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. (7.1 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713282236682,"sku":"90942","price":255.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-6w3v3-4-6-5-16-5cm-w3-series-car-sub-subwoofer-driver-4ohm-150w-rms-47166570627338.jpg?v=1748429014"},{"product_id":"jl-audio-13w3v3-4-13-5-34-5cm-w3-series-car-sub-subwoofer-driver-4ohm-600w-rms","title":"JL Audio 13W3v3-4 13.5\" 34.5cm W3 Series Car Sub Subwoofer Driver 4ohm 600w RMS","description":"\u003cp\u003e\u003cstrong\u003e13W3v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e13.5-inch (345 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 13.5-inch Subwoofer (600 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels.\u003c\/p\u003e\n\u003cp\u003eAs with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 13W3v3-4 is best used with amplifier power in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713284071690,"sku":"90940","price":479.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-13w3v3-4-13-5-34-5cm-w3-series-car-sub-subwoofer-driver-4ohm-600w-rms-47166571610378.jpg?v=1748429010"},{"product_id":"jl-audio-13w3v3-2-13-5-34-5cm-w3-series-car-sub-subwoofer-driver-2ohm-600w-rms","title":"JL Audio 13W3v3-2 13.5\" 34.5cm W3 Series Car Sub Subwoofer Driver 2ohm 600w RMS","description":"\u003cp\u003e\u003cstrong\u003e13W3v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e13.5-inch (345 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW3v3 13.5-inch Subwoofer (600 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels.\u003c\/p\u003e\n\u003cp\u003eAs with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 13W3v3-2 is best used with amplifier power in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Motor Analysis - DMA Optimized Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElevated Frame Cooling \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFloating Cone Attach Method - FCAM™ \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis assembly technique, conceived by JL Audio, ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVented Reinforcement Collar\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) improves the rigidity and stability of the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713285841162,"sku":"90939","price":479.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-13w3v3-2-13-5-34-5cm-w3-series-car-sub-subwoofer-driver-2ohm-600w-rms-47166573510922.jpg?v=1748429048"},{"product_id":"jl-audio-10w1v3-4-10-25cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 10W1v3-4 10\" 25cm W1 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W1v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW1v3 10-inch Subwoofer (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. \/ 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 10W1v3-4 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713287643402,"sku":"90921","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w1v3-4-10-25cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166574362890.jpg?v=1748429014"},{"product_id":"jl-audio-10w1v3-2-10-25cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms","title":"JL Audio 10W1v3-2 10\" 25cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W1v3-2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW1v3 10-inch Subwoofer (300 W, 2 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. \/ 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 10W1v3-2 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713288986890,"sku":"90920","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w1v3-2-10-25cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms-47166574985482.jpg?v=1748428998"},{"product_id":"jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 10W0v3-4 10\" 25cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003e10W0v3-4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e10-inch (250 mm) Subwoofer Driver, 4 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eW0v3 10-inch Subwoofer (300 W, 4 Ω)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 10W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the \"Specifications\" tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713291772170,"sku":"90919","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166576656650.jpg?v=1748428991"},{"product_id":"jl-audio-cp208lg-w3v3-dual-sub-8-microsub-ported-subwoofer-enclosure-500w-rms","title":"JL Audio CP208LG-W3V3 Dual Sub 8\" MicroSub Ported Subwoofer Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eCP208LG-W3v3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eDual 8W3v3 MicroSub, Ported, 2 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Dual 8W3v3-4 Subwoofers, Black Carpet (500 W, 2 Ω) - Ported Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 Subwoofers, each in separate airspace, with an efficient slot-ported design.\u003c\/p\u003e\n\u003cp\u003eExtensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries\/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on front baffle. Steel mesh grilles are included to protect the Subwoofers.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 200 - 500W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 2 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713304224010,"sku":"90989","price":749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp208lg-w3v3-dual-sub-8-microsub-ported-subwoofer-enclosure-500w-rms-47166587273482.jpg?v=1748428935"},{"product_id":"jl-audio-cls110rg-w7ae-subwoofer-10-w7-prowedge-sealed-sub-enclosure-750w-rms","title":"JL Audio CLS110RG-W7AE Subwoofer 10\" W7 ProWedge Sealed Sub Enclosure 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eCLS110RG-W7AE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eSingle 10W7AE ProWedge, Sealed, 3 Ω\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosed Subwoofer System with Single 10W7AE-3 Subwoofer, Black Carpet (750 W, 3 Ω) - Sealed Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE Subwoofer are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level.\u003c\/p\u003e\n\u003cp\u003eThis enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10W7AE-3 and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThis subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eThe angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.\u003c\/p\u003e\n\u003cp\u003eFinish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-Cut High-Grade MDF\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 300 - 750W\u003c\/p\u003e\n\u003cp\u003eNominal Impedance: 3 Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713304715530,"sku":"90982","price":1269.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cls110rg-w7ae-subwoofer-10-w7-prowedge-sealed-sub-enclosure-750w-rms-47166588944650.jpg?v=1748428934"}],"url":"https:\/\/www.cen.uk\/collections\/jl-audio-subwoofers.oembed?page=3","provider":"CEN","version":"1.0","type":"link"}