{"title":"Brax Subwoofers","description":"\u003cp\u003eBrax subwoofers.\u003c\/p\u003e","products":[{"product_id":"brax-matrix-ml10-sub-10-inch-25cm-subwoofer-600w-rms-2-ohms-dual-voice-coil","title":"Brax Matrix ML10 SUB 10 Inch 25cm Subwoofer 600w RMS 2 Ohms Dual Voice Coil","description":"\u003cp\u003e\u003cstrong\u003eThe Brax Matrix ML10 SUB is a 10-inch (250mm) high-end subwoofer rated at 600W RMS, featuring a 2 x 2 ohm dual voice coil. It is part of the Brax Matrix loudspeaker series and is sold as a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor a complete Brax Matrix system, pair the ML10 SUB with the \u003ca href=\"\/products\/brax-matrix-ml28-pro-hi-end-28mm-1-1-inch-silk-dome-tweeters-120w-rms-pair\"\u003eBrax Matrix ML28 PRO tweeters\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" \/ 250mm, sold singly\u003c\/li\u003e\n\u003cli\u003ePower handling: 600W RMS \/ 1,200W max\u003c\/li\u003e\n\u003cli\u003eVoice coil: dual 2 x 2 ohms (65mm)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87 dB @ 1W\/1m\u003c\/li\u003e\n\u003cli\u003eResonance frequency: 34 Hz, Qts 0.51, Vas 46L\u003c\/li\u003e\n\u003cli\u003eMax. linear excursion: +\/- 12.5mm\u003c\/li\u003e\n\u003cli\u003eInstallation diameter: 235mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 114mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBRAX MATRIX ML10 SUB: 250mm high-end subwoofer with 2 x 2 ohm dual voice coil\u003c\/h2\u003e\n\u003cp\u003eThe Brax Matrix loudspeaker series is completed by the ML10 SUB, built to the same uncompromising standards as the rest of the Brax range.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStiff hand-scooped paper cone with \"MicroSphere\" coating — ceramic hollow spheres embedded in a polymer layer — for best possible impulse response\u003c\/li\u003e\n\u003cli\u003eSpecially shaped rubber surround for long linear cone excursion\u003c\/li\u003e\n\u003cli\u003e2 x 2 ohm dual voice coil with exceptional winding height for high linear excursion and low distortion\u003c\/li\u003e\n\u003cli\u003eOptimised voice coil ventilation via large mesh-protected holes in T-yoke and basket for minimal compression and maximum heat dissipation\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised, extremely solid aluminium diecast basket\u003c\/li\u003e\n\u003cli\u003ePowerful, precisely machined magnet system for highest magnetic flux linearity\u003c\/li\u003e\n\u003cli\u003eMassive push-terminals for large wire gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePerfection meets maximum flexibility\u003c\/h2\u003e\n\u003cp\u003eThe 2 x 2 ohm dual voice coil allows three wiring configurations: 1 x 4 ohms, 2 x 2 ohms or 1 x 1 ohm, with maximum power handling up to 1,200W. Four massive connection terminals make it straightforward to achieve clean, controlled bass regardless of the amplifier setup.\u003c\/p\u003e\n\n\u003ch2\u003eMicroSphere: weight and stiffness\u003c\/h2\u003e\n\u003cp\u003eThe ML10 SUB uses a patented \"MicroSphere\" cone coating that embeds ceramic hollow spheres — each just 75 µm in diameter — within a polyamide layer applied to the hand-scooped cone. This improves both stiffness and internal damping without adding moving mass, resulting in a lower total Q factor and better impulse response.\u003c\/p\u003e\n\n\u003ch2\u003e\"Engineering at its best\" in harmony with timeless elegance\u003c\/h2\u003e\n\u003cp\u003eThe ML10 SUB features an extremely linear magnet drive with precisely machined pole plates for low distortion, a large multi-ventilated voice coil for maximum electrical power handling, and an aerodynamically shaped die-cast basket. Each unit ships in a wooden box with its own serial number, registered in the Brax service database.\u003c\/p\u003e","brand":"Brax","offers":[{"title":"Default Title","offer_id":51915026137354,"sku":"92018","price":1199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/BRAXML10.jpg?v=1760008010"},{"product_id":"brax-matrix-ml8-sub-8-inch-20cm-subwoofer-400w-rms-2-ohms-dual-voice-coil","title":"Brax Matrix ML8 SUB 8 Inch 20cm Subwoofer 400w RMS 2 Ohms Dual Voice Coil","description":"\u003cp\u003e\u003cstrong\u003eThe Brax Matrix ML8 SUB is an 8 inch (200 mm) high-end car subwoofer rated at 400W RMS (800W max), with a 2 x 2 ohm dual voice coil. It is part of the Brax Matrix loudspeaker series, designed for deep, controlled bass reproduction in small enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 8 inch \/ 200 mm\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS \/ 800W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 x 2 ohm dual voice coil\u003c\/li\u003e\n\u003cli\u003eResonance frequency (Fs): 32 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 85 dB (1W\/1m)\u003c\/li\u003e\n\u003cli\u003eMax. linear excursion (Xmax): +\/- 9.2 mm\u003c\/li\u003e\n\u003cli\u003eInstallation diameter: 191 mm \/ 7.5 in\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 95.6 mm \/ 3.8 in\u003c\/li\u003e\n\u003cli\u003eCone: paper with MicroSphere ceramic coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBrax Matrix ML8 SUB: 8 inch \/ 200 mm high-end subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Brax Matrix loudspeaker series is built to an uncompromising standard, and the ML8 SUB continues that approach. It is engineered for acoustic precision and suits sound quality builds where enclosure space is limited.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHand-scooped paper cone with MicroSphere coating — ceramic micro hollow spheres embedded in a polymer layer — for the best possible impulse response\u003c\/li\u003e\n\u003cli\u003eSpecially shaped rubber surround for long, linear cone excursion\u003c\/li\u003e\n\u003cli\u003e2 x 2 ohm dual voice coil with exceptional winding height for high linear excursion and low distortion\u003c\/li\u003e\n\u003cli\u003eOptimised voice coil ventilation via large, mesh-protected holes in the T-yoke and basket, for minimal compression and maximum heat dissipation\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised, solid aluminium diecast basket\u003c\/li\u003e\n\u003cli\u003ePrecisely machined magnet system for the highest magnetic flux linearity\u003c\/li\u003e\n\u003cli\u003eMassive push terminals for large wire gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePrecision in perfection\u003c\/h2\u003e\n\u003cp\u003eThe ML8 SUB is built to reproduce deep bass accurately in the smallest practical enclosures. Every component is designed to handle large amounts of amplifier power and convert it into sound pressure without compression.\u003c\/p\u003e\n\n\u003ch2\u003eMicroSphere: one material for two opposing requirements\u003c\/h2\u003e\n\u003cp\u003eMaximum cone stiffness and high inner damping are usually in conflict. The MicroSphere coating resolves this by embedding ceramic micro hollow spheres — just 75 microns in diameter — in a polymer layer applied directly to the diaphragm. The result is acoustic precision and consistent sound quality.\u003c\/p\u003e\n\n\u003ch2\u003eTimeless elegance\u003c\/h2\u003e\n\u003cp\u003eThe ML8 SUB follows Brax's clean, reduced design language. An optionally available MR8 stainless steel ring can be used as a mounting ring or to fix a grille, depending on the installation position.\u003c\/p\u003e\n\u003cp\u003eEach ML8 SUB is supplied in a wooden presentation box with its own serial number, registered in a Brax service database.\u003c\/p\u003e","brand":"Brax","offers":[{"title":"Default Title","offer_id":51915201478922,"sku":"92019","price":969.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/braxml8.jpg?v=1760008579"},{"product_id":"brax-matrix-ml8-mid-8-inch-hi-end-midbass-woofers-200w-rms-4-ohms-pair","title":"Brax Matrix ML8 MID 8 Inch Hi-End Midbass Woofers 200w RMS 4 Ohms Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Brax Matrix ML8 MID is a pair of 8-inch (200mm) hi-end midbass woofers rated at 200W RMS at 4 ohms, featuring MicroSphere-coated paper cones and hand-selected in matched pairs. They are part of the Brax Matrix loudspeaker series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 8\" \/ 200mm midbass woofer, sold as a hand-selected pair\u003c\/li\u003e\n\u003cli\u003ePower handling: 200W RMS \/ 400W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89 dB @ 1W\/1m\u003c\/li\u003e\n\u003cli\u003eResonance frequency: 45 Hz, Qts 0.58, Vas 24L\u003c\/li\u003e\n\u003cli\u003eMax. linear excursion: +\/- 6mm\u003c\/li\u003e\n\u003cli\u003eInstallation diameter: 191mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 92mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBrax Matrix ML8 MID: 2 x 8\" \/ 200mm high-end midbass woofer\u003c\/h2\u003e\n\u003cp\u003eThe Brax Matrix loudspeaker series is expanded with the ML8 MID, developed and manufactured to the same uncompromising standard as all Brax loudspeakers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStiff hand-scooped paper cone with MicroSphere coating — ceramic micro hollow spheres embedded in a polymer layer — for best impulse response without sound colouration\u003c\/li\u003e\n\u003cli\u003eSpecial-shaped rubber surround for long linear cone excursion\u003c\/li\u003e\n\u003cli\u003eHemispherically shaped dustcap to optimise frequency response in the midrange\u003c\/li\u003e\n\u003cli\u003eOptimised voice coil ventilation via large, mesh-protected holes in T-yoke and basket for near-zero compression and maximum heat dissipation\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised, extremely solid aluminium diecast basket\u003c\/li\u003e\n\u003cli\u003eUltra-precise machined magnet system for highest magnetic flux linearity\u003c\/li\u003e\n\u003cli\u003eMassive push-terminals for large wire gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMade for ultimate kickbass dynamics\u003c\/h2\u003e\n\u003cp\u003eWhere a 165mm front stage falls short on dynamics, the ML8 MID steps in. Every detail is designed for perfect tonality and to convert high amplifier power into sound pressure without compression. It pairs with the \u003ca href=\"\/products\/brax-matrix-ml28-pro-hi-end-28mm-1-1-inch-silk-dome-tweeters-120w-rms-pair\"\u003eBrax Matrix ML28 PRO tweeters\u003c\/a\u003e and other Matrix components to build a complete Brax Matrix system.\u003c\/p\u003e\n\n\u003ch2\u003eMicroSphere — a material for two opposing requirements\u003c\/h2\u003e\n\u003cp\u003eMaximum cone stiffness combined with high inner damping sounds contradictory. The MicroSphere coating resolves this: ceramic micro hollow spheres with a diameter of just 75 microns are embedded in a polymer layer and applied to the diaphragm. The result is acoustic precision and sound quality in the kickbass and lower midrange.\u003c\/p\u003e\n\n\u003ch2\u003eTimeless elegance\u003c\/h2\u003e\n\u003cp\u003eThe clear, reduced design is the hallmark of every Brax product, and the ML8 MID is no exception. The optional MR8 stainless steel ring can be used as a mounting ring or grille fixing depending on installation position. Each pair is hand-selected, supplied in a wooden box with its own serial number, and registered in a service database.\u003c\/p\u003e","brand":"Brax","offers":[{"title":"Default Title","offer_id":51915296506122,"sku":"92020","price":1449.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/BRAXML8PAIR.jpg?v=1760009948"},{"product_id":"brax-matrix-ml28-pro-hi-end-28mm-1-1-inch-silk-dome-tweeters-120w-rms-pair","title":"Brax Matrix ML28 PRO Hi-End 28mm 1.1 Inch Silk Dome Tweeters 120w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Brax Matrix ML28 PRO is a pair of handcrafted 28mm (1.1 inch) silk dome tweeters rated at 120W RMS, featuring a merino wool damped coupling volume and machined stainless steel housings. They are part of the Brax Matrix PRO hi-end car audio speaker range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Matrix ML28 PRO shares its 52mm installation diameter with the \u003ca href=\"\/products\/brax-graphic-gl1-mk2-hi-end-25mm-1-inch-aluminium-dome-tweeters-100w-rms-pair\"\u003eBrax Graphic GL1 MK2\u003c\/a\u003e tweeters. The Matrix range also includes the \u003ca href=\"\/products\/brax-matrix-ml80-pro-3-inch-high-end-midrange-car-speakers-100w-rms-pair\"\u003eBrax Matrix ML80 PRO\u003c\/a\u003e midrange speakers.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 28mm \/ 1.1\" silk dome tweeter with Acronal coating, sold as a pair\u003c\/li\u003e\n\u003cli\u003ePower handling: 120W RMS \/ 170W max (high-pass above 3,000 Hz at 12 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 1,800 Hz – 25,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 90 dB @ 1W\/1m (93 dB @ 2.83V\/1m)\u003c\/li\u003e\n\u003cli\u003eInstallation diameter: 52mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 25mm\u003c\/li\u003e\n\u003cli\u003eIncluded: mounting rings and 4 grilles in two designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThe evolution of an icon\u003c\/h2\u003e\n\u003cp\u003eThe ML28 PRO is the latest addition to the Brax Matrix series of audiophile-quality car audio speakers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-end 28mm silk dome – smooth, detailed treble with visco-elastic Acronal coating on both sides\u003c\/li\u003e\n\u003cli\u003eEnhanced coupling volume – dampened with merino wool for low resonance and accurate sound quality\u003c\/li\u003e\n\u003cli\u003eInnovative inward-flanged design – improved sound dispersion for superior frequency response\u003c\/li\u003e\n\u003cli\u003eSolid machined stainless steel housing – exclusive design with optimum heat dissipation\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency neodymium magnet – 8-port ventilation ensures ideal linearity of magnetic flux and lowest possible distortion\u003c\/li\u003e\n\u003cli\u003eInward-facing stainless steel phase plug – prevents unwanted reflections within the coupling volume for focused sound reproduction\u003c\/li\u003e\n\u003cli\u003eStandardised 52mm mounting diameter – compatible with MATRIX ML50 PRO, GRAPHIC GL2 and GL1 MK2\u003c\/li\u003e\n\u003cli\u003e24 carat gold-plated terminals – maximum conductivity for optimal signal transmission\u003c\/li\u003e\n\u003cli\u003eTwo exclusive swappable grille designs included – optimised for sound performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInnovation and first-class quality\u003c\/h2\u003e\n\u003cp\u003eThe ML28 PRO uses a 28mm silk dome coated on both sides with visco-elastic Acronal for smooth, detailed high-frequency reproduction. An innovative coating process reduces dome weight for improved dynamics and impulse response. The coupling volume is dampened with merino wool, optimised for a low resonance frequency and accurate sound quality.\u003c\/p\u003e\n\u003ch2\u003eForm and function in perfection\u003c\/h2\u003e\n\u003cp\u003eThe solid machined stainless steel housing provides an exclusive appearance alongside effective heat dissipation. The inward-flanged design optimises sound dispersion for a superior frequency response. A high-efficiency neodymium magnet with 8-port ventilation ensures linearity of magnetic flux and minimal distortion. The inward-facing stainless steel phase plug eliminates unwanted reflections within the coupling volume, and 24 carat gold-plated terminals ensure maximum conductivity and optimal signal transmission.\u003c\/p\u003e\n\u003ch2\u003eSeamless integration in the Brax speaker lineup\u003c\/h2\u003e\n\u003cp\u003eThe standardised 52mm installation diameter means the ML28 PRO fits directly alongside other speakers in the Brax Matrix and Graphic ranges. The two included grilles in interchangeable designs offer protection and are optimised for sound performance. Grilles from other Brax loudspeakers sharing the same standardised dimensions can also be used if required.\u003c\/p\u003e\n\u003ch2\u003eEach pair is unique\u003c\/h2\u003e\n\u003cp\u003eEvery speaker set is hand-selected and paired according to its acoustic parameters to ensure consistent tonal matching. Each matched pair then receives a unique serial number, recorded to a service database. The ML28 PRO is supplied in exclusive wooden box packaging.\u003c\/p\u003e","brand":"Brax","offers":[{"title":"Default Title","offer_id":51915349688586,"sku":"92021","price":859.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/braxml28protweeters.jpg?v=1760011461"},{"product_id":"brax-graphic-gl1-mk2-hi-end-25mm-1-inch-aluminium-dome-tweeters-100w-rms-pair","title":"Brax Graphic GL1 MK2 Hi-End 25mm 1 Inch Aluminium Dome Tweeters 100w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Brax Graphic GL1 MK2 is a pair of 25mm (1 inch) ceramic aluminium hard dome tweeters rated at 100W RMS, from the Brax Graphic range. Made in Germany with CNC machined stainless steel housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor a three-way Brax Graphic system, combine with the \u003ca href=\"\/products\/brax-graphic-gl3-mk2-3-inch-high-end-midrange-car-speakers-100w-rms-pair\"\u003eBrax Graphic GL3 MK2\u003c\/a\u003e midrange and \u003ca href=\"\/products\/brax-graphic-gl6-mk2-6-5-inch-high-end-mid-woofer-100w-rms-pair\"\u003eBrax Graphic GL6 MK2\u003c\/a\u003e woofers.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 25mm \/ 1\" ceramic aluminium hard dome tweeter, sold as a pair\u003c\/li\u003e\n\u003cli\u003ePower handling: 100W RMS \/ 150W max (high-pass above 3,000 Hz at 12 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 2,000 Hz – 25,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 90 dB @ 1W\/1m (93 dB @ 2.83V\/1m)\u003c\/li\u003e\n\u003cli\u003eInstallation diameter: 52mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 21.5mm\u003c\/li\u003e\n\u003cli\u003eIncluded: mounting rings and protective grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBrax Graphic GL1 MK2: 25mm ceramic aluminium dome tweeter\u003c\/h2\u003e\n\u003cp\u003eThe Brax Graphic series was developed by Audiotec founder Heinz Fischer with the goal of bringing high-end audio performance into the car without compromise. The GL1 MK2 is made in Germany using premium components and precision manufacturing throughout.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra stiff ceramic aluminium hard dome for precise, dynamic treble response\u003c\/li\u003e\n\u003cli\u003eCNC machined stainless steel housing for maximum heat dissipation\u003c\/li\u003e\n\u003cli\u003eIntegrated, merino wool damped coupling volume for low resonance frequency\u003c\/li\u003e\n\u003cli\u003e12 x ventilated neodymium magnet for highest magnetic flux linearity\u003c\/li\u003e\n\u003cli\u003eIntegrated 24-carat gold plated terminals for maximum conductivity\u003c\/li\u003e\n\u003cli\u003eRear mounting ring with fine thread for hidden fastening\u003c\/li\u003e\n\u003cli\u003eSturdy protection grille included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBrilliant treble reproduction\u003c\/h2\u003e\n\u003cp\u003eThe ceramic aluminium dome uses a complex manufacturing process in which a plasma flame melts ceramic powder onto the surface of an aluminium substrate. This produces a dome that combines high stiffness with low moving mass and high inner damping, delivering compression-free treble. The merino wool damped coupling volume lowers the resonance frequency, allowing lower crossover frequencies.\u003c\/p\u003e\n\n\u003ch2\u003ePuristic design with sophisticated features\u003c\/h2\u003e\n\u003cp\u003eThe solid stainless steel housing provides clean aesthetics and efficient heat dissipation. The fine-thread mounting ring allows seamless integration into the car interior. The 12-times drilled neodymium magnet is optimised for linear magnetic flux, the recessed 24-carat gold plated terminal minimises contact resistance, and the rigid grille protects the diaphragm.\u003c\/p\u003e\n\n\u003ch2\u003eEach pair is unique\u003c\/h2\u003e\n\u003cp\u003eEvery pair of GL1 MK2 tweeters carries its own individual serial number, logged in the Brax database. They are supplied in a wooden presentation box.\u003c\/p\u003e","brand":"Brax","offers":[{"title":"Default Title","offer_id":51919404073226,"sku":"92022","price":539.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/BraxGraphicGL1MK2tweeters.jpg?v=1760084213"},{"product_id":"brax-graphic-gl2-hi-end-50mm-2-inch-midrange-speakers-80w-rms-pair","title":"Brax Graphic GL2 Hi-End 50mm 2 Inch Midrange Speakers 80w RMS Pair","description":"\u003cp\u003e\u003cstrong\u003eThe Brax Graphic GL2 is a 50mm (2-inch) hi-end cone midrange speaker rated at 80W RMS per pair, made in Germany as part of the Brax Graphic series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the GL2 50mm (2-inch) midrange. The Brax Graphic midrange range is also available as the \u003ca href=\"\/products\/brax-graphic-gl3-mk2-3-inch-high-end-midrange-car-speakers-100w-rms-pair\"\u003eGL3 MK2 3-inch midrange\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 50mm \/ 2 inch\u003c\/li\u003e\n\u003cli\u003ePower handling: 80W RMS (pair)\u003c\/li\u003e\n\u003cli\u003eRigid aluminium cone by Dr. Kurt Müller\u003c\/li\u003e\n\u003cli\u003ePrecision-machined neodymium magnet system\u003c\/li\u003e\n\u003cli\u003e24-carat gold-plated terminals\u003c\/li\u003e\n\u003cli\u003eThreaded rear hole for hidden mounting\u003c\/li\u003e\n\u003cli\u003eSturdy protective grille included\u003c\/li\u003e\n\u003cli\u003eIndividually serial-numbered\u003c\/li\u003e\n\u003cli\u003eSupplied in a wooden presentation box\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIts compact dimensions open up new mounting positions — including A-pillar installation — with an outer diameter almost identical to the \u003ca href=\"\/products\/brax-graphic-gl1-mk2-hi-end-25mm-1-inch-aluminium-dome-tweeters-100w-rms-pair\"\u003eBrax Graphic GL1 MK2 tweeter\u003c\/a\u003e. Its broadband frequency response is wide enough to use without a separate tweeter, approaching a true point source for strong stereo imaging.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-end midrange driver that outgrows its potential\u003c\/h2\u003e\n\u003cp\u003eEvery component — from the basket to the diaphragm — was rethought and manufactured with purpose-made tooling. The exceptionally wide frequency response means the GL2 can run without an additional tweeter, bringing music reproduction in the car closer to a true point-source ideal.\u003c\/p\u003e\n\u003cp\u003eThe rigid aluminium cone by Dr. Kurt Müller delivers a natural midrange with dynamic sound characteristics. The precision-machined neodymium magnet system maintains optimally linear magnetic flux, contributing to an exceptionally low distortion factor.\u003c\/p\u003e\n\n\u003ch2\u003eElegant design with high functionality\u003c\/h2\u003e\n\u003cp\u003e24-carat gold-plated terminals maximise conductivity and complete the purist aesthetic. The sturdy black grille protects the cone, and the threaded hole on the rear allows discreet, hidden integration into the vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eDetails well-thought-out to the end\u003c\/h2\u003e\n\u003cp\u003eEach pair carries its own serial number, registered in the Brax service database. The GL2 is finished in an elegant wooden presentation box — a fitting complement to the uncompromising Brax philosophy.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eEnormously broadband frequency response, even off-axis — suitable as a full-range driver without an additional tweeter\u003c\/li\u003e\n\u003cli\u003eRigid aluminium cone for outstanding, natural midrange response\u003c\/li\u003e\n\u003cli\u003eClear and dynamic sound from the lightweight aluminium cone\u003c\/li\u003e\n\u003cli\u003ePrecisely machined neodymium magnet system for highest magnetic flux linearity\u003c\/li\u003e\n\u003cli\u003e24-carat gold-plated terminals for maximum conductivity\u003c\/li\u003e\n\u003cli\u003eThreaded rear hole for hidden fastening\u003c\/li\u003e\n\u003cli\u003eSturdy protection grille to safeguard the cone\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised basket\u003c\/li\u003e\n\u003cli\u003eExtremely compact dimensions, ideal for A-pillar installation\u003c\/li\u003e\n\u003cli\u003eIndividually serial-numbered and supplied in a wooden presentation box\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Brax","offers":[{"title":"Default Title","offer_id":51956818706698,"sku":"92036","price":539.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/braxgl2speakers.jpg?v=1760623771"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/collections\/b3d73c690d74ec2d6de0de578b6f56fb_2e4fa88b-003a-4dd8-9871-3f4cb3d8e759.png?v=1792188004","url":"https:\/\/www.cen.uk\/collections\/brax-subwoofers.oembed","provider":"CEN","version":"1.0","type":"link"}