{"title":"AudioControl Accessories","description":"\u003cp\u003e\u003cstrong\u003eAudioControl Accessories\u003c\/strong\u003e is a broad collection of car audio components covering speakers, tweeters, DSP processors, passive crossovers and signal accessories. Prices start from £39.99, making the range accessible whether you are building a full high-SPL system or simply upgrading worn factory speakers.\u003c\/p\u003e\u003cp\u003eThe collection splits broadly into the high-output EPIC Pro Series and the high-fidelity PNW Series, joined by system-level tools including the DM-810 DSP matrix processor and the AC-LGD load generating device for factory-amplifier integration.\u003c\/p\u003e","products":[{"product_id":"audiocontrol-ac-lgd-pair-of-dummy-load-generating-device-signal-stabiliser","title":"AudioControl AC-LGD Pair of Dummy Load Generating Device \u0026 Signal Stabiliser","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl AC-LGD is a pair of dummy load generating devices (LGDs) designed to stabilise the signal from a factory Class D amplifier when factory speakers are removed, preventing muting, distortion or damaging frequencies reaching aftermarket audio equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied as: a pair of LGDs\u003c\/li\u003e\n\u003cli\u003eDesign: carefully selected resistors and a Zobel network\u003c\/li\u003e\n\u003cli\u003eFits between: factory speaker outputs and a line output converter or speaker-level inputs\u003c\/li\u003e\n\u003cli\u003eConnection: pre-wired connectors with standard wire colours for front and rear\u003c\/li\u003e\n\u003cli\u003eSize (without wires\/connectors): 2.3 x 1.0 in\u003c\/li\u003e\n\u003cli\u003eLength with wires\/connectors: 9.75 in\u003c\/li\u003e\n\u003cli\u003eWeight: 39g (1.4oz) per LGD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudioControl AC-LGD\u003c\/h2\u003e\n\u003cp\u003eToday's factory systems use more Class D amplifier technology, which can mute, distort or send damaging frequencies to aftermarket equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel network, the AC-LGD generates load and stabilises the signal from the factory system to ensure the best possible audio quality.\u003c\/p\u003e\n\u003cp\u003eThe AC-LGD is designed to work alongside AudioControl factory system upgrade products such as the \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eAudioControl LC2i 2 Channel Line Out Converter\u003c\/a\u003e or the \u003ca href=\"\/products\/audiocontrol-lc6i-6-channel-speaker-level-line-out-rca-converter-high-to-low\"\u003eAudioControl LC6i 6 Channel Line Out Converter\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe LGDs install between the factory speaker outputs and your line output converter or speaker-level inputs on your amp or processor. Pre-wired connectors with standard wire colours for front and rear make connection straightforward. Supplied as a pair.\u003c\/p\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":45713002496266,"sku":"90130","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audiocontrol-load-generator-audiocontrol-ac-lgd-pair-of-dummy-load-generating-device-signal-stabiliser-47166122524938.jpg?v=1748431617"},{"product_id":"audiocontrol-epicpro3nt-3-inch-neodymium-tweeters-140w","title":"AudioControl EPICPRO3NT 3 Inch Neodymium Tweeters 140w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO3NT is a pair of 3-inch neodymium car audio tweeters rated at 140 W RMS \/ 180 W max, with 105 dB sensitivity. They are part of AudioControl's EPIC Pro speaker range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 3-inch tweeter. The EPIC Pro tweeter range is also available as the \u003ca href=\"\/products\/audiocontrol-epicpro4t-4-inch-bullet-tweeters-80w-rms\"\u003eAudioControl EPICPRO4T 4-inch Bullet Tweeters\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 3.0\" \/ 76.2 mm tweeter (sold as a pair)\u003c\/li\u003e\n\u003cli\u003ePower handling: 140 W RMS \/ 180 W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 105 dB at 2.83V\/1m\u003c\/li\u003e\n\u003cli\u003eFrequency response: 1,500 Hz to 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 1.5\" \/ 38 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 53 mm (2.09\")\u003c\/li\u003e\n\u003cli\u003eMounting depth: 29.1 mm (1.14\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency and low distortion: delivers concert-level sound at extreme volumes without distortion\u003c\/li\u003e\n\u003cli\u003eHigh output and far projection: generates substantial sound that fills the vehicle and projects powerfully\u003c\/li\u003e\n\u003cli\u003eHigh SPL capability: built to handle significant power with exhilarating volume and dynamic impact\u003c\/li\u003e\n\u003cli\u003ePhase cap technology: combines a dust cap and phase plug in one design, widening bandwidth, increasing efficiency and smoothing frequency transitions between mid and high frequencies\u003c\/li\u003e\n\u003cli\u003eLightweight components with precision tolerances: efficient, impactful and accurate audio reproduction\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl's engineering team in California\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with AudioControl's EPIC Series amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eEPIC Pro tweeters are engineered to project sound far and wide with refined accuracy, handling everything from live recordings to studio tracks with strong efficiency and minimal power waste.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-tuned components and lightweight materials mean these tweeters get loud without unnecessarily taxing your amplifier.\u003c\/p\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53315915874570,"sku":"93290","price":109.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO3NT_1.jpg?v=1783338277"},{"product_id":"audiocontrol-epicpro69cx-6x9-inch-coaxial-speakers-200w","title":"AudioControl EPICPRO69CX 6x9 Inch Coaxial Speakers 200w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO69CX is a pair of 6x9 inch EPIC PROAXIAL coaxial car speakers rated at 200W RMS (300W max), combining a midrange driver and titanium bullet tweeter for loud, full-range sound from a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for the EPICPRO69CX. If you are adding separate tweeters instead, see the \u003ca href=\"\/products\/audiocontrol-epicpro69x-6x9-inch-midrange-speakers-200w\"\u003eEPICPRO69X 6x9 inch midrange speakers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 in coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 200W RMS \/ 300W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 100 Hz to 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 97.6 dB @ 2.83V \/ 1m\u003c\/li\u003e\n\u003cli\u003eVoice coil (tweeter \/ mid): 0.78 in \/ 1.2 in\u003c\/li\u003e\n\u003cli\u003eCut-out: 5.75 x 8.35 in\u003c\/li\u003e\n\u003cli\u003eMounting depth: 2.94 in\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair with grilles and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout the EPIC PROAXIAL range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC PROAXIAL series is built to be street loud and studio clear — a significant step away from conventional car audio.\u003c\/p\u003e\n\u003cp\u003eThe engineering focus is on efficiency and SPL, using components such as lightweight composite cones and dual-roll cloth surrounds. The result is speakers that get loud without sacrificing accuracy or clarity under pressure.\u003c\/p\u003e\n\u003cp\u003eThis coaxial model combines a high-efficiency midrange driver with a compact bullet tweeter for a loud, full-range response from a single point source. Having both in one unit removes the need for separate mid and high-frequency drivers, simplifying installation without compromising performance.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProaxial coaxial design: midrange driver and bullet tweeter deliver a loud, full-range response from a single unit.\u003c\/li\u003e\n\u003cli\u003eLightweight voice coil: high SPL output with low distortion.\u003c\/li\u003e\n\u003cli\u003ePrecision-designed tweeter horn: smooth high-frequency response for immersive audio.\u003c\/li\u003e\n\u003cli\u003eTitanium tweeter diaphragm: high-volume, accurate sound.\u003c\/li\u003e\n\u003cli\u003eDouble-roll cloth surround: accurate sound reproduction and consistent long-term performance.\u003c\/li\u003e\n\u003cli\u003eHigh-tensile stamped-steel basket: improved damping for precise cone movement and clean, low-distortion sound.\u003c\/li\u003e\n\u003cli\u003eStiff paper cone: warm, smooth sound with enhanced damping.\u003c\/li\u003e\n\u003cli\u003eCopper shorting ring: widens bandwidth and reduces distortion for a seamless woofer-to-tweeter transition.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl engineers as a complete, performance-driven system.\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with AudioControl EPIC Series amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53316014932234,"sku":"93291","price":189.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO69CX.jpg?v=1783342613"},{"product_id":"audiocontrol-epicpro69x-6x9-inch-midrange-speakers-200w","title":"AudioControl EPICPRO69X 6x9 Inch Midrange Speakers 200w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO69X is a pair of 6x9 inch midrange speakers rated at 200W RMS (300W max), part of the AudioControl EPIC Pro Series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for the EPICPRO69X 6x9 inch midrange drivers. They cover 120 Hz to 10,000 Hz; for a 6x9 with a built-in tweeter, see the \u003ca href=\"\/products\/audiocontrol-epicpro69cx-6x9-inch-coaxial-speakers-200w\"\u003eEPICPRO69CX coaxial version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 in midrange\u003c\/li\u003e\n\u003cli\u003ePower handling: 200W RMS \/ 300W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 120 Hz to 10,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 94.2 dB @ 1W\/1m, 97.2 dB @ 2.83V\/1m\u003c\/li\u003e\n\u003cli\u003eVoice coil: 1.2 in \/ 30.5 mm\u003c\/li\u003e\n\u003cli\u003eCut-out: 5.75 x 8.35 in\u003c\/li\u003e\n\u003cli\u003eMounting depth: 2.96 in\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout the EPIC Pro range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC Pro speaker line is built for high-output systems, whether you are showing off at a car meet or keeping things understated.\u003c\/p\u003e\n\u003cp\u003eEPIC Pro speakers are engineered to project sound far and wide with accurate reproduction across live recordings and studio tracks, combining high output with serious efficiency.\u003c\/p\u003e\n\u003cp\u003eRather than choosing between a dust cap or a phase plug, AudioControl combined both into a single phase cap. This widens bandwidth, increases efficiency and smooths the transition between mid and high frequencies.\u003c\/p\u003e\n\u003cp\u003ePrecision-tuned components, lightweight materials and California-based design and engineering mean these speakers get loud without wasting amplifier power. There is an EPIC Pro speaker for every kind of build.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency and low distortion: concert-level sound at extreme volumes.\u003c\/li\u003e\n\u003cli\u003eHigh output and far projection: big sound that fills the vehicle and carries powerfully.\u003c\/li\u003e\n\u003cli\u003eHigh SPL capability: built to handle serious power with strong dynamic impact.\u003c\/li\u003e\n\u003cli\u003ePhase cap design: boosts efficiency and widens bandwidth for more sound from less power.\u003c\/li\u003e\n\u003cli\u003eLightweight components and precision tolerances: engineered for efficiency, accuracy and impact.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl's own engineers.\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with AudioControl EPIC Series amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53316486693130,"sku":"93292","price":139.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO69X.jpg?v=1783344359"},{"product_id":"audiocontrol-epicpro6cx-6-5-inch-coaxial-speakers-200w","title":"AudioControl EPICPRO6CX 6.5 Inch Coaxial Speakers 200w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO6CX is a pair of 6.5 inch EPIC PROAXIAL coaxial car speakers rated at 200W RMS (300W max), combining a midrange driver and titanium bullet tweeter for loud, full-range sound from a single unit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for the EPICPRO6CX. For a 6.5 inch midrange without a tweeter, see the \u003ca href=\"\/products\/audiocontrol-epicpro6x-6-5-inch-midrange-speakers-200w\"\u003eEPICPRO6X\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6.5 in \/ 165 mm coaxial\u003c\/li\u003e\n\u003cli\u003ePower handling: 200W RMS \/ 300W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 120 Hz to 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 98.3 dB @ 2.83V \/ 1m\u003c\/li\u003e\n\u003cli\u003eVoice coil (tweeter \/ mid): 0.78 in \/ 1.2 in\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 147 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 75.3 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair with grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout the EPIC PROAXIAL range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC PROAXIAL series is designed to be street loud and studio clear — a deliberate departure from conventional car audio.\u003c\/p\u003e\n\u003cp\u003eEngineering focus is on efficiency and SPL, using lightweight composite cones and dual-roll cloth surrounds rather than standard car audio components. The result is high output without sacrificing clarity or accuracy under pressure.\u003c\/p\u003e\n\u003cp\u003eThis coaxial model integrates a high-efficiency midrange driver and compact bullet tweeter into a single point source, removing the need for separate mid and high-frequency drivers and simplifying installation without compromising performance.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProaxial coaxial design: midrange driver and bullet tweeter deliver a loud, full-range response from one unit.\u003c\/li\u003e\n\u003cli\u003eLightweight voice coil: high SPL output with low distortion.\u003c\/li\u003e\n\u003cli\u003ePrecision-designed tweeter horn: smooth high-frequency response for immersive audio.\u003c\/li\u003e\n\u003cli\u003eTitanium tweeter diaphragm: high-volume, accurate sound.\u003c\/li\u003e\n\u003cli\u003eDouble-roll cloth surround: accurate sound reproduction and consistent long-term performance.\u003c\/li\u003e\n\u003cli\u003eHigh-tensile stamped-steel basket: improved damping for precise cone movement and clean, low-distortion sound.\u003c\/li\u003e\n\u003cli\u003eStiff paper cone: warm, smooth sound with enhanced damping.\u003c\/li\u003e\n\u003cli\u003eCopper shorting ring: widens bandwidth and reduces distortion for a seamless woofer-to-tweeter transition.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl engineers as a complete, performance-driven system.\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with AudioControl EPIC Series amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53316780753162,"sku":"93293","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO6CX.jpg?v=1783346840"},{"product_id":"audiocontrol-epicpro6x-6-5-inch-midrange-speakers-200w","title":"AudioControl EPICPRO6X 6.5 Inch Midrange Speakers 200w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO6X is a pair of 6.5 inch EPIC Pro Series midrange car speakers rated at 200W RMS (300W max), designed for high-SPL and street audio systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for the EPICPRO6X. The EPIC Pro range is also available as the slim EPICPRO6S and the EPICPRO6CX coaxial version with built-in tweeter.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6.5 in \/ 165 mm midrange\u003c\/li\u003e\n\u003cli\u003ePower handling: 200W RMS \/ 300W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 120 Hz to 12,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 94.8 dB @ 1W\/1m, 97.8 dB @ 2.83V\/1m\u003c\/li\u003e\n\u003cli\u003eVoice coil: 1.2 in \/ 30.5 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 149.7 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 77 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout the EPIC Pro range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC Pro speaker line is built to perform whether you are competing at shows or running a clean daily driver build.\u003c\/p\u003e\n\u003cp\u003eEPIC Pro speakers are engineered for wide projection and refined accuracy, delivering high output on both live recordings and studio tracks without sacrificing efficiency.\u003c\/p\u003e\n\u003cp\u003eRather than choosing between a dust cap or a phase plug, AudioControl combined both in its phase cap. This widens bandwidth, increases efficiency and smooths the transition between mid and high frequencies.\u003c\/p\u003e\n\u003cp\u003ePrecision-tuned components, lightweight materials and California-based design and engineering mean these speakers get loud without drawing excess power from your amplifier.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency and low distortion: concert-level sound maintained at extreme volumes.\u003c\/li\u003e\n\u003cli\u003eHuge output and far projection: fills your vehicle and projects powerfully so audio is heard and felt.\u003c\/li\u003e\n\u003cli\u003eHigh SPL capability: built to handle serious power, delivering volume and dynamic impact.\u003c\/li\u003e\n\u003cli\u003ePhase cap design: boosts efficiency and widens bandwidth, extracting more sound from less power.\u003c\/li\u003e\n\u003cli\u003eLightweight components and precision tolerances: engineered for efficiency, accuracy and impactful sound.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl engineers as a complete, performance-driven speaker.\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with EPIC Series amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53317203427594,"sku":"93294","price":109.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO6X.jpg?v=1783349041"},{"product_id":"audiocontrol-epicpro8x-8-inch-midrange-speakers-250w","title":"AudioControl EPICPRO8X 8 Inch Midrange Speakers 250w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO8X is a pair of 8-inch EPIC Pro Series midrange car speakers rated at 250W RMS (350W max) with 99.2 dB sensitivity at 2.83V, designed for high-output SPL systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 8 in \/ 200 mm midrange\u003c\/li\u003e\n\u003cli\u003ePower handling: 250W RMS \/ 350W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 80 Hz to 12,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 96.2 dB @ 1W\/1m, 99.2 dB @ 2.83V\/1m\u003c\/li\u003e\n\u003cli\u003eVoice coil: 1.5 in \/ 38 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 186.6 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 84.5 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout the EPIC Pro range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC Pro speaker line is built for builds that demand serious output — whether that's a show car or a clean street system.\u003c\/p\u003e\n\u003cp\u003eEPIC Pro speakers are engineered to project sound far and wide with refined accuracy, delivering high performance and strong efficiency across live and studio material alike.\u003c\/p\u003e\n\u003cp\u003eRather than choosing between a dust cap or a phase plug, AudioControl combined both in its phase cap design, which widens bandwidth, increases efficiency and smooths the transition between mid and high frequencies.\u003c\/p\u003e\n\u003cp\u003ePrecision-tuned components, lightweight materials and ground-up California engineering let these speakers get loud without wasting power from your amplifier. There is an EPIC Pro speaker for every kind of build.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency and low distortion: concert-level sound even at extreme volumes.\u003c\/li\u003e\n\u003cli\u003eHuge output and far projection: fills your vehicle and projects powerfully so your audio is heard and felt.\u003c\/li\u003e\n\u003cli\u003eHigh SPL capability: built to handle serious power, delivering volume and dynamic impact.\u003c\/li\u003e\n\u003cli\u003ePhase cap for efficiency and bandwidth: boosts efficiency and widens bandwidth, giving more sound from less power and capturing every musical nuance.\u003c\/li\u003e\n\u003cli\u003eLightweight components and precision tolerances: meticulously engineered for efficiency, impact and accuracy.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl engineers as a complete, performance-driven system.\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with EPIC Series amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53320679358730,"sku":"93295","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO8X.jpg?v=1783411152"},{"product_id":"audiocontrol-pnw-series-pnw-1-1-inch-tweeters-100w","title":"AudioControl PNW Series PNW-1 1 Inch Tweeters 100w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-1 is a pair of 1-inch hybrid silk dome tweeters from the AudioControl PNW Series, rated at 100W RMS, housed in precision machined aluminium and supplied with in-line high-pass filters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a full 3-way front stage, the PNW-1 works with the \u003ca href=\"\/products\/audiocontrol-pnw-xn3-3-way-passive-crossover-network\"\u003eAudioControl PNW-XN3 3-way passive crossover network\u003c\/a\u003e, which provides a 4kHz high-pass tweeter output.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 1 inch (25mm voice coil)\u003c\/li\u003e\n\u003cli\u003ePower: 100W RMS \/ 125W max\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 1kHz–20kHz\u003c\/li\u003e\n\u003cli\u003eIn-line crossover: 1st order Butterworth, 3.5kHz high-pass, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 47mm; mounting depth: 16mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter (with grille): 54mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-1 tweeters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePNW-1: PNW Series High-Fidelity Tweeters\u003c\/h2\u003e\n\u003cp\u003eThe PNW-1 features a hybrid silk dome diaphragm and precision machined aluminium housing for accurate sound reproduction with minimal distortion. The detachable housing and included mounting accessories simplify installation across a range of applications. The in-line high-pass filters ensure only the intended frequencies reach the tweeter.\u003c\/p\u003e\n\u003cp\u003ePair the PNW-1 with any speaker from the AudioControl PNW line-up for a cohesive front stage. On PNW coaxial models, the tweeter's point source design aligns the output of both drivers for improved speaker alignment and sound quality. For a complete system, the PNW Series pairs with AudioControl Spike or Space Series subwoofers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiaphragm: High-fidelity silk dome for accurate sound reproduction.\u003c\/li\u003e\n\u003cli\u003eHousing: Precision machined aluminium for durability.\u003c\/li\u003e\n\u003cli\u003eSonic damping: Embedded sonic damping pad for improved audio performance.\u003c\/li\u003e\n\u003cli\u003eMagnet: Neodymium magnet for enhanced efficiency and compact design.\u003c\/li\u003e\n\u003cli\u003eAssembly: Detachable assembly for OE (Original Equipment) applications.\u003c\/li\u003e\n\u003cli\u003eFrequency response: Rear dampened hybrid silk dome tweeter for extended frequency response.\u003c\/li\u003e\n\u003cli\u003eMounting: Multiple mounting accessories included.\u003c\/li\u003e\n\u003cli\u003eFilters: Included in-line high-pass filters to minimise distortion.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53321198698762,"sku":"93296","price":109.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-1.jpg?v=1783414163"},{"product_id":"audiocontrol-pnw-275-2-75-inch-midrange-speakers-25w","title":"AudioControl PNW-275 2.75 Inch Midrange Speakers 25w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-275 are a pair of 2.75-inch component midrange speakers rated at 25W RMS, featuring a paper fibre matrix mica-coated cone and edge-enhanced steel frame. They are part of AudioControl's PNW Series, designed to add a dedicated midrange driver to a 3-way front stage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo run the PNW-275 as the midrange in a 3-way system, pair it with the \u003ca href=\"\/products\/audiocontrol-pnw-xn3-3-way-passive-crossover-network\"\u003ePNW-XN3 3-way passive crossover\u003c\/a\u003e and the \u003ca href=\"\/products\/audiocontrol-pnw-65cs2-6-5-inch-component-speakers-100w\"\u003ePNW-65CS2 6.5-inch\u003c\/a\u003e or \u003ca href=\"\/products\/audiocontrol-pnw-69cs2-6x9-inch-component-speakers-100w\"\u003ePNW-69CS2 6x9-inch component speakers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 2.75 inch midrange (20mm voice coil)\u003c\/li\u003e\n\u003cli\u003ePower: 25W RMS \/ 50W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 100Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eFilter: Butterworth high-pass at 250Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 67mm; mounting depth: 35mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter: 95mm (72mm without metal bracket)\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-275 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePNW Series 2.75\" Component Midrange Speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is designed to be paired with AudioControl amplifiers for a complete in-vehicle system. The range uses an edge-enhanced steel frame for structural rigidity, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. On the PNW-275 specifically, the paper fibre matrix cone with mica coating is used to optimise sound reproduction.\u003c\/p\u003e\n\u003cp\u003eEach set comes supplied with mounting hardware. For a complete system, AudioControl recommend pairing PNW speakers with their Spike or Space Series subwoofers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003ePaper fibre matrix cone with mica coating for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eTransparent thermal-polymer dust cap for superior fidelity\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53321777217802,"sku":"93297","price":99.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-275.jpg?v=1783416061"},{"product_id":"audiocontrol-pnw-35-3-5-inch-coaxial-speakers-25w-rms","title":"AudioControl PNW-35 3.5 Inch Coaxial Speakers 25w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-35 is a pair of 3.5 inch 2-way coaxial speakers rated at 25W RMS, with a rear-dampened hybrid silk dome tweeter, rigid poly mica-coated cone and edge-enhanced steel frame. Part of AudioControl's PNW Series, they are a direct drop-in upgrade for factory 3.5 inch speaker locations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 3.5 inch 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 25W RMS \/ 50W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 90Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: Butterworth high-pass at 5900Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out: 76.5mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 39.5mm\u003c\/li\u003e\n\u003cli\u003eVoice coils: 13mm tweeter, 25mm midrange\u003c\/li\u003e\n\u003cli\u003eOverall diameter (with metal bracket): 113mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-35 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePNW Series 3.5\" High-Fidelity Coaxial Speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is designed to pair with AudioControl's amplifier range and deliver high-fidelity sound from standard factory speaker positions. The PNW-35 features an edge-enhanced steel frame for structural rigidity, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction across the frequency range.\u003c\/p\u003e\n\u003cp\u003eEach set includes high-quality mounting hardware for a straightforward installation. The tweeter's point source design aligns the output of both drivers for improved speaker alignment and sound staging. For a more complete system, the PNW Series can be paired with AudioControl Spike or Space Series subwoofers. To connect PNW speakers to a factory head unit without RCA outputs, the \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eAudioControl LC2i 2 Channel Line Out Converter\u003c\/a\u003e is a compatible signal converter option.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear-dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eConcentric point source design for a seamless transition from midrange to tweeter\u003c\/li\u003e\n\u003cli\u003eSonic diffuser and radiant collar for better off-axis frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53321941778698,"sku":"93298","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-35.jpg?v=1783418053"},{"product_id":"audiocontrol-pnw-4-4-inch-coaxial-speakers-50w-rms","title":"AudioControl PNW-4 4 Inch Coaxial Speakers 50w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-4 is a pair of 4-inch 2-way coaxial speakers rated at 50W RMS, from AudioControl's PNW Series. They feature a rear-dampened hybrid silk dome tweeter, rigid poly mica-coated cone and edge-enhanced steel frame, designed as a high-fidelity drop-in replacement for factory 4-inch speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 4-inch 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 50W RMS \/ 75W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 75Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: Butterworth high-pass at 5900Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out: 91.5mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 42.2mm\u003c\/li\u003e\n\u003cli\u003eMidrange voice coil: 25mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter (without grille): 133mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-4 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePNW Series 4\" High-Fidelity Coaxial Speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is built around an edge-enhanced steel frame for structural strength, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction, while the tweeter's concentric point source design aligns both drivers for better imaging and clarity.\u003c\/p\u003e\n\u003cp\u003eEach set ships with high-quality mounting hardware for a straightforward installation. For best results, pair the PNW-4 with an AudioControl amplifier. If you're adding amplification to a factory head unit, the \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eAudioControl LC2i line out converter\u003c\/a\u003e is a practical starting point for getting a clean signal to your amp.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear-dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eConcentric point source design for a seamless transition from midrange to tweeter\u003c\/li\u003e\n\u003cli\u003eSonic diffuser and radiant collar for better off-axis frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53322569974026,"sku":"93299","price":189.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-4.jpg?v=1783421054"},{"product_id":"audiocontrol-pnw-525-5-25-inch-coaxial-speakers-50w-rms","title":"AudioControl PNW-525 5.25 Inch Coaxial Speakers 50w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-525 is a pair of 5.25 inch 2-way coaxial speakers rated at 50W RMS \/ 75W max, part of AudioControl's PNW Series. They feature a rear-dampened hybrid silk dome tweeter, rigid poly mica-coated cone and edge-enhanced steel frame, designed as a high-fidelity drop-in replacement for factory 5.25 inch speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5.25 inch 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 50W RMS \/ 75W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 75Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: Butterworth high-pass at 5250Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out: 91.5mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 42.2mm\u003c\/li\u003e\n\u003cli\u003eVoice coils: 20mm tweeter, 35mm midrange\u003c\/li\u003e\n\u003cli\u003eOverall diameter (without grille): 133mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-525 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePNW Series 5.25\" High-Fidelity Coaxial Speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series speakers are built around an edge-enhanced steel frame for structural rigidity, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction across the frequency range. A concentric point source tweeter design aligns the output of both drivers for improved staging and clarity.\u003c\/p\u003e\n\u003cp\u003eEach set includes high-quality mounting hardware for a straightforward installation. For a complete system upgrade, the PNW-525 pairs well with AudioControl's amplifiers and line output converters such as the \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eAudioControl LC2i\u003c\/a\u003e or the \u003ca href=\"\/products\/audiocontrol-lc6i-6-channel-speaker-level-line-out-rca-converter-high-to-low\"\u003eAudioControl LC6i\u003c\/a\u003e, allowing integration with factory head units.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eConcentric point source design for a seamless transition from midrange to tweeter\u003c\/li\u003e\n\u003cli\u003eSonic diffuser and radiant collar for better off-axis frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53324537004298,"sku":"93303","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-525.jpg?v=1783430781"},{"product_id":"audiocontrol-pnw-57-5x7-inch-coaxial-speakers-75w-rms","title":"AudioControl PNW-57 5x7 Inch Coaxial Speakers 75w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-57 is a pair of 5x7 inch 2-way coaxial speakers rated at 75W RMS, from AudioControl's PNW Series. They feature a rear-dampened hybrid silk dome tweeter, rigid poly mica-coated cone and edge-enhanced steel frame, designed as a direct, high-fidelity replacement for factory 5x7 inch speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5x7 inch 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 75W RMS \/ 100W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: Butterworth high-pass at 5250Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out: 118 x 177mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 57mm\u003c\/li\u003e\n\u003cli\u003eVoice coils: 20mm tweeter, 35mm midrange\u003c\/li\u003e\n\u003cli\u003eOverall size: 140.6 x 221.9mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-57 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePNW Series 5x7\" High-Fidelity Coaxial Speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is built around an edge-enhanced steel frame for structural rigidity, a black anodized voice coil former for superior heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction, while the rear-dampened hybrid silk dome tweeter extends frequency response. The tweeter's concentric point source design aligns the output of both drivers for improved staging and clarity.\u003c\/p\u003e\n\u003cp\u003eMounting hardware is included for a straightforward installation. For a complete system upgrade, the PNW-57 pairs well with AudioControl's amplifiers — adding an \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eAudioControl LC2i line output converter\u003c\/a\u003e is a practical way to integrate an aftermarket amplifier into a factory head unit setup.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear-dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eConcentric point source design for a seamless transition from midrange to tweeter\u003c\/li\u003e\n\u003cli\u003eSonic diffuser and radiant collar for better off-axis frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53324596871434,"sku":"93304","price":269.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-57.jpg?v=1783433338"},{"product_id":"audiocontrol-pnw-65-6-5-inch-coaxial-speakers-75w-rms","title":"AudioControl PNW-65 6.5 Inch Coaxial Speakers 75w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-65 is a pair of 6.5 inch 2-way coaxial speakers rated at 75W RMS, with a rear-dampened hybrid silk dome tweeter, rigid poly mica-coated cone and edge-enhanced steel frame. Part of AudioControl's PNW Series, they are designed as a straightforward high-fidelity upgrade for factory 6.5 inch speaker locations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6.5 inch 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 75W RMS \/ 100W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: Butterworth high-pass at 5250Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out: 142mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 60mm\u003c\/li\u003e\n\u003cli\u003eVoice coils: 20mm tweeter, 35mm midrange\u003c\/li\u003e\n\u003cli\u003eOverall diameter (without grille): 166mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-65 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePNW Series 6.5\" coaxial speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is built around an edge-enhanced steel frame for structural rigidity, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction, while the rear-dampened hybrid silk dome tweeter extends frequency response.\u003c\/p\u003e\n\u003cp\u003eThe tweeter's concentric point source design aligns the output of both drivers for improved speaker alignment and sound quality. Mounting hardware is included for a straightforward installation. For a complete system upgrade, the PNW-65 pairs well with AudioControl amplifiers — an \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eAudioControl LC2i line output converter\u003c\/a\u003e is a practical addition when integrating with a factory head unit.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear-dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eConcentric point source design for a seamless transition from midrange to tweeter\u003c\/li\u003e\n\u003cli\u003eSonic diffuser and radiant collar for better off-axis frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53324761170186,"sku":"93305","price":269.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-65.jpg?v=1783435729"},{"product_id":"audiocontrol-pnw-65cs2-6-5-inch-component-speakers-100w","title":"AudioControl PNW-65CS2 6.5 Inch Component Speakers 100w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-65CS2 is a 6.5 inch 2-way component speaker set rated at 100W RMS \/ 125W max, featuring separate 1-inch hybrid silk dome tweeters and 2nd order Linkwitz-Riley crossovers. It is part of AudioControl's PNW Series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 6.5 inch version. The PNW component speaker range is also available as the \u003ca href=\"\/products\/audiocontrol-pnw-69cs2-6x9-inch-component-speakers-100w\"\u003ePNW-69CS2 6x9 inch component speakers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6.5 inch woofer + 1 inch tweeter\u003c\/li\u003e\n\u003cli\u003ePower: 100W RMS \/ 125W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: 2nd order Linkwitz-Riley, 3.5kHz HP\/LP, -12dB\/octave\u003c\/li\u003e\n\u003cli\u003eVoice coils: 25mm tweeter, 35mm woofer\u003c\/li\u003e\n\u003cli\u003eWoofer cut-out: 142mm; mounting depth: 60mm\u003c\/li\u003e\n\u003cli\u003eTweeter cut-out: 47mm; mounting depth: 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePNW-65CS2: PNW Series 6.5\" High-Fidelity Component Speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is designed to pair with AudioControl's amplifier range and delivers strong detail and clarity in a vehicle environment. The PNW line features an edge-enhanced steel frame for structural strength, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction.\u003c\/p\u003e\n\u003cp\u003eEach set includes high-quality mounting hardware for straightforward installation. To expand to a 3-way front stage, add the PNW-275 2.75 inch midrange speakers and the PNW-XN3 3-way passive crossover network.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53328090202378,"sku":"93313","price":309.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-65CS2.jpg?v=1783506083"},{"product_id":"audiocontrol-pnw-69-6x9-inch-coaxial-speakers-75w-rms","title":"AudioControl PNW-69 6x9 Inch Coaxial Speakers 75w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-69 is a pair of 6x9 inch 2-way coaxial speakers rated at 75W RMS, part of AudioControl's PNW Series. They feature a rear-dampened hybrid silk dome tweeter, rigid poly mica-coated cone and edge-enhanced steel frame — designed as a high-fidelity drop-in replacement for factory 6x9 inch speakers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 inch 2-way coaxial\u003c\/li\u003e\n\u003cli\u003ePower: 75W RMS \/ 100W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: Butterworth high-pass at 5250Hz, -6dB\/octave\u003c\/li\u003e\n\u003cli\u003eCut-out: 146 x 212mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 75mm\u003c\/li\u003e\n\u003cli\u003eVoice coils: 20mm tweeter, 35mm midrange\u003c\/li\u003e\n\u003cli\u003eOverall size: 167 x 235mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: 2 x PNW-69 speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePNW Series 6x9\" coaxial speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is designed to pair with AudioControl's amplifier range, delivering high-fidelity performance from a straightforward coaxial install. The edge-enhanced steel frame provides structural rigidity, the black anodized voice coil former aids heat dissipation, and the linear double-roll surround ensures precise cone movement. The rigid poly mica-coated cone optimises sound reproduction across the frequency range.\u003c\/p\u003e\n\u003cp\u003eThe tweeter uses a concentric point source design to align the output of both drivers, improving integration between midrange and tweeter. Each set includes mounting hardware for a straightforward fit. If you're upgrading from a factory head unit and need to add RCA outputs, AudioControl's \u003ca href=\"\/products\/audiocontrol-lc2i-2-channel-rca-line-out-high-to-low-converter-with-accubass\"\u003eLC2i line out converter\u003c\/a\u003e is a compatible solution.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA-designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear-dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eConcentric point source design for a seamless transition from midrange to tweeter\u003c\/li\u003e\n\u003cli\u003eSonic diffuser and radiant collar for better off-axis frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53328214589706,"sku":"93314","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-69.jpg?v=1783507936"},{"product_id":"audiocontrol-pnw-69cs2-6x9-inch-component-speakers-100w","title":"AudioControl PNW-69CS2 6x9 Inch Component Speakers 100w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-69CS2 is a 6x9 inch 2-way component speaker set rated at 100W RMS, with separate 1-inch hybrid silk dome tweeters and 2nd order Linkwitz-Riley crossovers. Part of AudioControl's PNW Series.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 6x9 inch version. The PNW component speaker range is also available as the \u003ca href=\"\/products\/audiocontrol-pnw-65cs2-6-5-inch-component-speakers-100w\"\u003ePNW-65CS2 6.5-inch component speakers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6x9 inch woofer + 1 inch tweeter\u003c\/li\u003e\n\u003cli\u003ePower: 100W RMS \/ 125W max\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50Hz–20kHz\u003c\/li\u003e\n\u003cli\u003eCrossover: 2nd order Linkwitz-Riley, 3.5kHz HP\/LP, -12dB\/octave\u003c\/li\u003e\n\u003cli\u003eVoice coils: 25mm tweeter, 35mm woofer\u003c\/li\u003e\n\u003cli\u003eWoofer cut-out: 146 x 212mm; mounting depth: 75mm\u003c\/li\u003e\n\u003cli\u003eTweeter cut-out: 47mm; mounting depth: 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePNW Series 6x9\" component speakers\u003c\/h2\u003e\n\u003cp\u003eAudioControl has over 45 years of experience engineering audio components. The PNW Series is designed to be paired with AudioControl amplifiers for a high-fidelity in-vehicle sound stage. The PNW-69CS2 uses an edge-enhanced steel frame, a black anodized voice coil former for heat dissipation, and a linear double-roll surround for precise cone movement. The rigid poly mica-coated cone optimises sound reproduction.\u003c\/p\u003e\n\u003cp\u003eTo expand to a 3-way front stage, add the \u003ca href=\"\/products\/audiocontrol-pnw-275-2-75-inch-midrange-speakers-25w\"\u003ePNW-275 2.75-inch midrange speakers\u003c\/a\u003e and the \u003ca href=\"\/products\/audiocontrol-pnw-xn3-3-way-passive-crossover-network\"\u003ePNW-XN3 3-way passive crossover\u003c\/a\u003e. Mounting hardware is included for straightforward installation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEdge-enhanced steel frame for added structural strength\u003c\/li\u003e\n\u003cli\u003eBlack anodized voice coil former for superior heat dissipation\u003c\/li\u003e\n\u003cli\u003eLinear double-roll surround for precision cone movement\u003c\/li\u003e\n\u003cli\u003eComplex FEA designed high-efficiency motor\u003c\/li\u003e\n\u003cli\u003eRigid poly mica-coated cone for optimised sound reproduction\u003c\/li\u003e\n\u003cli\u003eRear dampened hybrid silk dome tweeter for extended frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-quality mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53328328589578,"sku":"93315","price":339.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-69CS2.jpg?v=1783510234"},{"product_id":"audiocontrol-pnw-xn3-3-way-passive-crossover-network","title":"AudioControl PNW-XN3 3 Way Passive Crossover Network","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl PNW-XN3 is a 3-way passive crossover network from AudioControl's PNW series. It upgrades a PNW 2-way component set into a full 3-way front stage by adding a dedicated midrange driver, with no power, ground or turn-on connections required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompatible PNW models: \u003ca href=\"\/products\/audiocontrol-pnw-65cs2-6-5-inch-component-speakers-100w\"\u003ePNW-65CS2 6.5-inch component speakers\u003c\/a\u003e, \u003ca href=\"\/products\/audiocontrol-pnw-69cs2-6x9-inch-component-speakers-100w\"\u003ePNW-69CS2 6x9-inch component speakers\u003c\/a\u003e and \u003ca href=\"\/products\/audiocontrol-pnw-275-2-75-inch-midrange-speakers-25w\"\u003ePNW-275 2.75-inch midrange speakers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: 3-way passive, no power, ground or turn-on needed\u003c\/li\u003e\n\u003cli\u003eCrossover: 2nd order Linkwitz-Riley with Zobel networks\u003c\/li\u003e\n\u003cli\u003eWoofer output: 350Hz low-pass (PNW-65 \/ PNW-69)\u003c\/li\u003e\n\u003cli\u003eMidrange output: 350Hz–4kHz band-pass (PNW-275)\u003c\/li\u003e\n\u003cli\u003eTweeter output: 4kHz high-pass (PNW-1)\u003c\/li\u003e\n\u003cli\u003ePower handling: 150W RMS\u003c\/li\u003e\n\u003cli\u003eInputs: 2, 4 or 6 channels; outputs: 6 channels\u003c\/li\u003e\n\u003cli\u003eCompatible: PNW-65CS2, PNW-69CS2, PNW-275\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePNW-XN3: 3-Way Crossover Network for PNW Series\u003c\/h2\u003e\n\u003cp\u003eThe PNW-XN3 expands a 2-way component speaker system into a full 3-way setup by adding a dedicated midrange driver alongside the existing midbass and tweeter. It is well suited to installs where an active crossover or DSP is not available or not in the budget.\u003c\/p\u003e\n\u003cp\u003eCompatible with both AudioControl PNW and Altitude series speakers, the PNW-XN3 combines all crossover functions into a single network. This removes the need for separate crossovers per driver, cuts wiring complexity and saves installation time. One PNW-XN3 supports a complete 3-way front stage — six speakers in total.\u003c\/p\u003e\n\u003cp\u003eWhen fed a full-range signal, the PNW-XN3 divides frequencies and routes them to the correct drivers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMidbass frequencies to 6.5-inch or 6×9-inch woofers (WF outputs)\u003c\/li\u003e\n\u003cli\u003eMidrange frequencies to 2.75-inch or 3.5-inch midrange speakers (MD outputs)\u003c\/li\u003e\n\u003cli\u003eHigh frequencies to tweeters (TW outputs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe flexible input section delivers six channels of output whether the unit is fed by 2, 4 or 6 input channels. As a fully passive network, it requires no power, ground or turn-on connections.\u003c\/p\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53328552427786,"sku":"93316","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/PNW-XN3_1.jpg?v=1783514090"},{"product_id":"audiocontrol-dm-810-8x10-channel-dsp-matrix-processor","title":"AudioControl DM-810 8x10 Channel DSP Matrix Processor","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl DM-810 is an 8-input, 10-output DSP matrix processor for car audio, with speaker-level, line-level and digital (Toslink and coax) inputs, 30-band EQ and time alignment for tuning factory or aftermarket systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 8 preamp channels, 1 x Toslink and coax digital input\u003c\/li\u003e\n\u003cli\u003eOutputs: 10 preamp channels, 10 Vrms max output\u003c\/li\u003e\n\u003cli\u003eInput impedance: 20 kohm preamp \/ 7 kohm speaker-level\u003c\/li\u003e\n\u003cli\u003eDSP: 30-band EQ, signal delay, signal summing, input and output RTA\u003c\/li\u003e\n\u003cli\u003eCrossovers: 12 and 24 dB\/octave Linkwitz-Riley, variable frequency\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz to 24 kHz, THD 0.01%\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 1 A (recommended fuse 3 A)\u003c\/li\u003e\n\u003cli\u003eDimensions: 10.5\" W x 5.7\" D x 1.6\" H, 1.2 kg (2.6 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDM-810 Premium 8 Input 10 Output DSP Matrix Processor\u003c\/h2\u003e\n\u003cp\u003eThe DM-810 lets you optimise any car audio system — factory or aftermarket — with full control over signal routing, EQ and time alignment.\u003c\/p\u003e\n\u003cp\u003eThe processor accepts active speaker-level, line-level and digital audio inputs, providing up to 10 channels of output. AudioControl's free DM Smart DSP app (Mac\/PC) gives access to signal summing, 30-band EQ, time alignment, input delay and phase correction, plus AudioControl proprietary features including AccuBASS, GTO Signal Sense and MILC, with integrated input and output RTAs.\u003c\/p\u003e\n\u003cp\u003eThe built-in Option Port allows hi-res streaming directly into the DSP and supports future proprietary connections for additional inputs, controllers and interface solutions.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInput and output RTA for precise tuning\u003c\/li\u003e\n\u003cli\u003eGTO Signal Sensing\u003c\/li\u003e\n\u003cli\u003eMILC clip detection\u003c\/li\u003e\n\u003cli\u003eAccuBASS\u003c\/li\u003e\n\u003cli\u003eSignal summing\u003c\/li\u003e\n\u003cli\u003eSignal delay\u003c\/li\u003e\n\u003cli\u003e12 and 24 dB\/octave Linkwitz-Riley crossovers\u003c\/li\u003e\n\u003cli\u003e30-band equaliser\u003c\/li\u003e\n\u003cli\u003eOptional ACR-3 remote for preset recall and level control\u003c\/li\u003e\n\u003cli\u003eOptional AC-BT24 Bluetooth streamer\/programmer\u003c\/li\u003e\n\u003cli\u003eDM Smart DSP app available as a free download for Mac\/PC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53338393837834,"sku":"93326","price":639.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/DM-810.jpg?v=1783602813"},{"product_id":"audiocontrol-epicpro6s-6-5-inch-midrange-speakers-200w","title":"AudioControl EPICPRO6S 6.5 Inch Midrange Speakers 200w","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO6S is a pair of 6.5 inch slim, shallow-mount EPIC Pro midrange car speakers rated at 200W RMS (300W max), with a 53 mm mounting depth for doors and panels with limited space.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the EPICPRO6S. If you have more depth available, the EPIC Pro range is also available in the full-depth 6.5 inch \u003ca href=\"\/products\/audiocontrol-epicpro6x-6-5-inch-midrange-speakers-200w\"\u003eEPICPRO6X\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 6.5 in \/ 165 mm slim midrange\u003c\/li\u003e\n\u003cli\u003ePower handling: 200W RMS \/ 300W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 120 Hz to 8,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93.1 dB @ 1W\/1m, 96.1 dB @ 2.83V\/1m\u003c\/li\u003e\n\u003cli\u003eVoice coil: 1.2 in \/ 30.5 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 141 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 53 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout the EPIC Pro range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC Pro speaker line is built for systems that need to perform — whether that is a show build or a clean daily driver.\u003c\/p\u003e\n\u003cp\u003eEPIC Pro speakers are engineered for wide projection and refined accuracy, delivering strong performance across live recordings and studio tracks with serious efficiency.\u003c\/p\u003e\n\u003cp\u003eRather than choosing between a dust cap or a phase plug, AudioControl combined both into its phase cap. This widens bandwidth, increases efficiency and smooths the transition between mid and high frequencies.\u003c\/p\u003e\n\u003cp\u003ePrecision-tuned components, lightweight materials and California design and engineering mean these speakers get loud without wasting amplifier power.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSlim shallow-mount design: suits vehicles with limited door or panel depth.\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and low distortion: concert-level sound maintained at extreme volumes.\u003c\/li\u003e\n\u003cli\u003eHuge output and far projection: fills the vehicle and projects powerfully so audio is heard and felt.\u003c\/li\u003e\n\u003cli\u003eHigh SPL capability: built to handle serious power with strong volume and dynamic impact.\u003c\/li\u003e\n\u003cli\u003ePhase cap: boosts efficiency, widens bandwidth and captures more musical detail from less power.\u003c\/li\u003e\n\u003cli\u003eLightweight components and precision tolerances: engineered for efficiency, impact and accuracy.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl engineers as a complete, performance-driven system.\u003c\/li\u003e\n\u003cli\u003eVoiced for EPIC amplifiers: specifically tuned to integrate with AudioControl EPIC Series amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53341190979850,"sku":"93328","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO6S.jpg?v=1783670286"},{"product_id":"audiocontrol-epicpro4t-4-inch-bullet-tweeters-80w-rms","title":"AudioControl EPICPRO4T 4 Inch Bullet Tweeters 80w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe AudioControl EPICPRO4T is a pair of 4-inch EPIC Pro bullet tweeters rated at 80W RMS (120W max) with 108 dB sensitivity, designed for high-efficiency SPL car audio systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 4 in \/ 102 mm bullet tweeter\u003c\/li\u003e\n\u003cli\u003ePower handling: 80W RMS \/ 120W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 2,000 Hz – 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 108 dB @ 2.83V \/ 1m\u003c\/li\u003e\n\u003cli\u003eVoice coil: 1.5 in \/ 38 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 71 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 42 mm\u003c\/li\u003e\n\u003cli\u003eSupplied as: pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout the EPIC Pro range\u003c\/h2\u003e\n\u003cp\u003eThe EPIC Pro speaker line is built for systems that need serious output — whether that's a show build or a clean daily driver setup.\u003c\/p\u003e\n\u003cp\u003eEPIC Pro speakers are engineered to project sound far and wide with refined accuracy, delivering high performance and strong efficiency across live and studio material.\u003c\/p\u003e\n\u003cp\u003eRather than choosing between a dust cap or a phase plug, AudioControl combined both into its phase cap design. This widens bandwidth, increases efficiency and smooths the transition between mid and high frequencies.\u003c\/p\u003e\n\u003cp\u003ePrecision-tuned components, lightweight materials and ground-up California engineering mean these tweeters get loud without wasting power from your amplifier. There is an EPIC Pro speaker for every kind of build.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency and low distortion: concert-level sound even at extreme volumes.\u003c\/li\u003e\n\u003cli\u003eHuge output and far projection: massive sound that fills your vehicle and projects powerfully.\u003c\/li\u003e\n\u003cli\u003eHigh SPL capability: built to handle serious power with volume and dynamic impact.\u003c\/li\u003e\n\u003cli\u003ePhase cap design: boosts efficiency and widens bandwidth, delivering more sound from less power.\u003c\/li\u003e\n\u003cli\u003eLightweight components and precision tolerances: engineered for efficiency, impact and accurate audio reproduction.\u003c\/li\u003e\n\u003cli\u003eAudioControl engineered: designed from the ground up by AudioControl's California engineering team.\u003c\/li\u003e\n\u003cli\u003eVoiced to pair with EPIC Series amplifiers: specifically tuned to integrate with AudioControl's EPIC amplifier range.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AudioControl","offers":[{"title":"Default Title","offer_id":53341346136330,"sku":"93329","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EPICPRO4T_2.jpg?v=1783673185"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/collections\/dc1d8699353bb5b2b74279ca120ae505_ea5074ab-227e-49e9-8f92-ea4f58afb88c.png?v=1792187789","url":"https:\/\/www.cen.uk\/collections\/audiocontrol-accessories.oembed","provider":"CEN","version":"1.0","type":"link"}