{"title":"12 Inch Subwoofers","description":"\u003cp\u003e\u003cstrong\u003e12 inch subwoofers give deep, powerful bass where the boot has room for a larger enclosure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a raw driver for a custom box, a ready-loaded enclosure, or an \u003ca href=\"\/collections\/active-subwoofers\"\u003eactive subwoofer\u003c\/a\u003e with the amplifier built in. Pair a driver with a \u003ca href=\"\/collections\/1-channel-amplifiers\"\u003emono amplifier\u003c\/a\u003e, browse all \u003ca href=\"\/collections\/subwoofers\"\u003ecar subwoofers\u003c\/a\u003e, or have your sub fitted at our Nottingham workshop.\u003c\/p\u003e","products":[{"product_id":"hertz-uno-s-300-s4-12-30cm-car-audio-sub-component-subwoofer-4-ohm-250w-rms","title":"Hertz UNO S 300 S4 12\" 30cm Car Audio Sub Component Subwoofer 4 Ohm 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz UNO S 300 S4 is a 12\" (300 mm) single 4 ohm component subwoofer rated at 250W RMS (1000W peak), part of Hertz's UNO range. It features a patented V-cone® design, 89.5 dB sensitivity and a 33 Hz resonance frequency, and is suited to both sealed and reflex enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is a component (driver only) subwoofer: it requires an enclosure and an external amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 300 mm (12 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 250W RMS, 1000W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89.5 dB\u003c\/li\u003e\n\u003cli\u003eResonance (Fs): 33 Hz\u003c\/li\u003e\n\u003cli\u003eXmax: 9.1 mm\u003c\/li\u003e\n\u003cli\u003eVoice coil: 38 mm (1.5 in)\u003c\/li\u003e\n\u003cli\u003eCone: painted pressed paper pulp, V-cone®\u003c\/li\u003e\n\u003cli\u003eWeight: 3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe S 300 S4 is the latest addition to the Hertz UNO range, designed to deliver powerful deep bass in any installation. Using lightweight materials — pressed paper for the cone and high-density foam for the suspension — it achieves 89.5 dB efficiency, making it easy to reach high sound pressure levels in-car.\u003c\/p\u003e\n\n\u003cp\u003eThe exclusive patented V-cone® system maintains maximum cone stiffness through wide excursions, producing low, undistorted frequencies at high volume. The resonance frequency of 33 Hz is notably low for a driver of this efficiency. A pre-assembled ABS gasket is included for a clean finished appearance once installed.\u003c\/p\u003e\n\n\u003ch2\u003eV-CONE®\u003c\/h2\u003e\n\n\u003cp\u003eThe V-cone®'s exponential profile closely approaches the ideal dispersion curve, providing exceptional output across the bass range.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery high efficiency and superior power handling\u003c\/li\u003e\n\u003cli\u003eV-cone® with pressed paper membrane for maximum lightness\u003c\/li\u003e\n\u003cli\u003eHigh-excursion foam surround combining high sensitivity and deep bass response\u003c\/li\u003e\n\u003cli\u003ePure copper voice coil wound on aluminium former for exceptional thermal and mechanical capacity\u003c\/li\u003e\n\u003cli\u003eFEM-refined motor structure using low-carbon steel and high-density flux ferrite magnet\u003c\/li\u003e\n\u003cli\u003eDesigned for use in small sealed or reflex enclosures\u003c\/li\u003e\n\u003cli\u003eABS gasket included for a neat installation finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712803332362,"sku":"90864","price":99.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-uno-s-300-s4-12-30cm-car-audio-sub-component-subwoofer-4-ohm-250w-rms-47165872505098.jpg?v=1748431831"},{"product_id":"hertz-mille-pro-mp-300-d4-3-12-inch-dual-voice-coil-car-subwoofer-sub-4ohms-600w","title":"Hertz Mille Pro MP 300 D4.3 12 Inch Dual Voice Coil Car Subwoofer Sub 4ohms 600w","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 300 D4.3 is a 12-inch (300 mm) dual voice coil car subwoofer with two 4 ohm coils, rated at 600 W RMS and 1200 W peak. It is part of the Mille Pro range from Hertz.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 4+4 ohm version. The MP 300 is also available with 2+2 ohm coils as the \u003ca href=\"\/products\/hertz-mille-pro-mp-300-d2-3-12-inch-dual-voice-coil-car-subwoofer-sub-2ohms-600w\"\u003eMP 300 D2.3\u003c\/a\u003e. A matching grille is available separately: the \u003ca href=\"\/products\/hertz-mille-pro-mg-300-3-12-inch-steel-mech-sub-grille-mp-300-d2-d4-subwoofer\"\u003eMG 300.3\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 300 mm (12 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 600 W continuous, 1200 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm (4+4)\u003c\/li\u003e\n\u003cli\u003eVoice coil: 65 mm, four-layer, TIL-P former\u003c\/li\u003e\n\u003cli\u003eMagnet: high-density flux ferrite\u003c\/li\u003e\n\u003cli\u003eCone: pressed pulp with mineral powders, V-cone® profile\u003c\/li\u003e\n\u003cli\u003eSurround: high-purity IIR-butyl rubber\u003c\/li\u003e\n\u003cli\u003eBasket: 6-spoke aluminium alloy, anti-resonant\u003c\/li\u003e\n\u003cli\u003eXmech: ±27 mm\u003c\/li\u003e\n\u003cli\u003eTerminals: push type, up to 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMP 300 D4.3 PRO\u003c\/h2\u003e\n\u003cp\u003e300 (12) mm (in.) | Subwoofers | 1200 W | 4+4 Ohm\u003c\/p\u003e\n\u003cp\u003eThe Mille Pro range draws on technology developed for the Mille Legend flagship line, bringing that performance to a broader audience. The MP 300 D4.3 delivers extreme dynamics and high power handling in a compact format.\u003c\/p\u003e\n\u003cp\u003eThe cone is pressed paper pulp with injected mineral powders — the same construction technique used on the Legend range. The V-cone® profile increases rigidity, allowing the cone to act as a piston. The surround is high-purity IIR-butyl rubber. Like the Legend ML 2000.3 and ML 2500.3, the Mille Pro subwoofers use Boundary Free Surround technology, which increases the effective emission surface for a given diameter, generating higher sound pressure.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminium alloy anti-resonant basket is shared with the flagship ML 2500.3. It contributes to mechanical damping and is acoustically transparent. The 65 mm four-layer voice coil is wound in a TIL-P former, delivering high linear displacement.\u003c\/p\u003e\n\u003cp\u003eThe 4 Ω + 4 Ω DVC configuration gives flexibility to match a wide range of amplifier systems. The air cooling and decompression system removes the need for a centre hole in the bottom plate, providing three benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia, keeping operating temperatures low during musical transients.\u003c\/li\u003e\n\u003cli\u003eMaximisation of the magnetic field at the coil with the same overall motor dimensions — greater iron in the pole reduces magnetic saturation and exploits maximum flux density from the magnet.\u003c\/li\u003e\n\u003cli\u003eThe subwoofer can be mounted directly against the enclosure wall. A damping rubber disk (included) secures it to the box and maintains air exchange through the 10 vents on the bottom plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHoles behind the voice coil winding and the 10 bottom plate vents improve air exchange to the coil's inner layers. These work with an innovative assembly system that forces air through the air gap, keeping coil temperature low even under demanding conditions. The terminals use solid push connectors with an anti-short-circuit cover, accepting cables up to 8 AWG for ultra-low wiring resistance in low-impedance configurations (1 ohm).\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712854155530,"sku":"90840","price":399.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mp-300-d4-3-12-inch-dual-voice-coil-car-subwoofer-sub-4ohms-600w-47165943480586.jpg?v=1748431755"},{"product_id":"hertz-mille-pro-mp-300-d2-3-12-inch-dual-voice-coil-car-subwoofer-sub-2ohms-600w","title":"Hertz Mille Pro MP 300 D2.3 12 Inch Dual Voice Coil Car Subwoofer Sub 2ohms 600w","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 300 D2.3 is a 12-inch (300 mm) dual voice coil subwoofer with two 2-ohm coils, rated at 600 W RMS and 1200 W peak. It features Boundary Free Surround technology and belongs to the Mille Pro range by Hertz.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAlso available with 4+4 ohm coils as the \u003ca href=\"\/products\/hertz-mille-pro-mp-300-d4-3-12-inch-dual-voice-coil-car-subwoofer-sub-4ohms-600w\"\u003eMP 300 D4.3\u003c\/a\u003e. Matching grille: \u003ca href=\"\/products\/hertz-mille-pro-mg-300-3-12-inch-steel-mech-sub-grille-mp-300-d2-d4-subwoofer\"\u003eMG 300.3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 300 mm (12 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 600 W continuous, 1200 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 2 ohm (2+2)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 86 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 65 mm, four-layer\u003c\/li\u003e\n\u003cli\u003eMagnet: high density flux ferrite\u003c\/li\u003e\n\u003cli\u003eXmech: ±26 mm\u003c\/li\u003e\n\u003cli\u003eTerminals: push type, up to 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMP 300 D2.3 PRO\u003c\/h2\u003e\n\u003cp\u003e300 mm (12 in.) | Subwoofer | 1200 W | 2+2 Ohm\u003c\/p\u003e\n\u003cp\u003eThe Mille Pro subwoofer range is built on technology developed for the Mille Legend line, refined to bring the Hertz sound experience to a broader audience. The MP 300 D2.3 delivers extreme dynamics and high power handling in a compact format.\u003c\/p\u003e\n\u003cp\u003eThe cone is pressed paper pulp with injected mineral powders — the same construction used on the Legend line. The V-cone® profile adds rigidity so the cone behaves like a piston. The surround is high-purity IIR-butyl rubber.\u003c\/p\u003e\n\u003cp\u003eLike the Legend ML 2000.3 and ML 2500.3, Mille Pro subwoofers use Boundary Free Surround technology, which increases the effective emission surface without increasing diameter, producing higher sound pressure. The compact 6-spoke aluminium alloy anti-resonant basket is shared with the top-model ML 2500.3, contributing to mechanical damping while remaining acoustically transparent. The 65 mm four-layer voice coil is wound in a TIL-P former, delivering high linear displacement.\u003c\/p\u003e\n\u003cp\u003eThe 2 Ω + 2 Ω DVC impedance configuration improves compatibility with a wide range of amplifier systems. The air cooling and decompression system removes the need for a centre hole on the bottom plate, providing three benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia, keeping operating temperatures low during musical transients.\u003c\/li\u003e\n\u003cli\u003eMaximised magnetic field at the coil with the same overall motor dimensions — greater iron in the pole reduces the risk of magnetic saturation and exploits the maximum flux density from the magnet.\u003c\/li\u003e\n\u003cli\u003eThe subwoofer can be mounted directly against the box wall, making full use of its compact dimensions. A damping rubber disc (included) secures it to the box and maintains air exchange through the 10 vents on the bottom plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHoles behind the voice coil winding and the 10 bottom-plate vents increase air exchange to the coil's inner layers. These work with an innovative assembly system that forces air through the air gap, keeping coil temperatures low even under extreme use. The push-type terminals include an anti-short-circuit cover and accept cables up to 8 AWG, ensuring ultra-low wiring resistance in low-impedance (1 ohm) configurations.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712854253834,"sku":"90839","price":399.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mp-300-d2-3-12-inch-dual-voice-coil-car-subwoofer-sub-2ohms-600w-47165944103178.jpg?v=1748431724"},{"product_id":"hertz-cento-cs-300-s4-sub-12-inch-30cm-300mm-car-subwoofer-4ohm-350w-rms","title":"Hertz Cento CS 300 S4 Sub 12 Inch 30cm 300mm Car Subwoofer 4ohm 350w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Cento CS 300 S4 is a 12 inch (300 mm) car subwoofer with a single 4 ohm voice coil, rated at 350W RMS and 700W peak, from Hertz's Cento range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 4 ohm (S4) version. The Hertz Cento CS 300 is also available in \u003ca href=\"\/products\/hertz-cento-cs-300-s2-sub-12-inch-30cm-300mm-car-subwoofer-2ohm-350w-rms\"\u003e2 ohm (S2)\u003c\/a\u003e. The optional CG 300 metal mesh grille is sold separately.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 300 mm (12 in.)\u003c\/li\u003e\n\u003cli\u003ePower handling: 350W RMS, 700W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eVoice coil: 35 mm (1.38 in.), six-layer copper on glass fibre former\u003c\/li\u003e\n\u003cli\u003eXmech: 16.5 mm (0.65 in.)\u003c\/li\u003e\n\u003cli\u003eMagnet: high density flux ferrite\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene\u003c\/li\u003e\n\u003cli\u003eWeight: 4.84 kg (10.68 lb)\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: sealed, from 32 litres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHertz Cento CS 300 S4\u003c\/h2\u003e\n\u003cp\u003e300 (12) mm (in.) | Subwoofer | 700W peak | 4 Ohm\u003c\/p\u003e\n\u003ch2\u003eThe authentic Hertz Sound Experience for the young enthusiasts\u003c\/h2\u003e\n\u003cp\u003eThe CS 300 S4 is designed to deliver strong bass from compact sealed enclosures. Hertz's engineering team optimised the electroacoustic parameters to achieve high performance in enclosures from just 32 litres for the 30 cm (12 in.) driver.\u003c\/p\u003e\n\u003cp\u003eThe 4 ohm single voice coil configuration offers wide compatibility with most amplifiers and suits enclosures housing more than one subwoofer.\u003c\/p\u003e\n\u003cp\u003eThe compact magnetic group, reduced depth, and absence of a rear decompression hole allow the enclosure to be built tightly around the driver — useful in tight or custom installations.\u003c\/p\u003e\n\u003cp\u003eA six-layer voice coil cooling system keeps operating temperature within an optimal range during extended high-volume listening sessions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElectroacoustic design optimised for enclosures from 32 litres.\u003c\/li\u003e\n\u003cli\u003eFluid dynamic optimisation system that drastically reduces acoustic distortion caused by air compression at high excursions.\u003c\/li\u003e\n\u003cli\u003ePolypropylene cone and dust cap geometry engineered through FEM simulations for low-frequency distortion reduction.\u003c\/li\u003e\n\u003cli\u003e35 mm 4 ohm voice coil wound on six layers of pure copper on a high thermal resistance glass fibre support.\u003c\/li\u003e\n\u003cli\u003eMagnetic group geometry optimised with proprietary software for high undistorted SPL at high excursions.\u003c\/li\u003e\n\u003cli\u003eCompact size and no decompression hole make it ideal for custom enclosures shaped closely around the driver.\u003c\/li\u003e\n\u003cli\u003eTerminal block with solid push contacts accepting cables up to 8 AWG — low wiring resistance and easy connection in multi-subwoofer installations.\u003c\/li\u003e\n\u003cli\u003eRubber-protected magnetic assembly and high-strength ABS plastic gasket for fitting the optional CG 300 grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn innovative fluid dynamic optimisation system — using the spider support as an air duct towards venting holes in the basket — reduces acoustic distortion from air compression at high excursions.\u003c\/p\u003e\n\u003cp\u003eThe cone geometry, suspension, and spider were developed using FEM (Finite Element Method) simulations to maintain control and low distortion at high mechanical excursions.\u003c\/p\u003e\n\u003cp\u003eThe terminal block uses solid push connectors accepting cables up to 8 AWG for low wiring resistance and straightforward connection, even in multi-subwoofer setups.\u003c\/p\u003e\n\u003cp\u003eAn ABS plastic gasket is included to mount the optional CG 300 grille — a robust black metal mesh cover with a Hertz diamond aluminium logo — for a clean finished look.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45713064460554,"sku":"90769","price":199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-cento-cs-300-s4-sub-12-inch-30cm-300mm-car-subwoofer-4ohm-350w-rms-47166248583434.jpg?v=1748431789"},{"product_id":"hertz-cento-cs-300-s2-sub-12-inch-30cm-300mm-car-subwoofer-2ohm-350w-rms","title":"Hertz Cento CS 300 S2 Sub 12 Inch 30cm 300mm Car Subwoofer 2ohm 350w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Cento CS 300 S2 is a 12 inch (300 mm) car subwoofer with a single 2 ohm voice coil, rated at 350W RMS and 700W peak, from Hertz's Cento range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 2 ohm version. The Hertz Cento CS 300 is also available in \u003ca href=\"\/products\/hertz-cento-cs-300-s4-sub-12-inch-30cm-300mm-car-subwoofer-4ohm-350w-rms\"\u003e4 ohm (CS 300 S4)\u003c\/a\u003e. The optional CG 300 metal mesh grille is sold separately.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 300 mm (12 in.)\u003c\/li\u003e\n\u003cli\u003ePower handling: 350W RMS, 700W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eVoice coil: 35 mm (1.38 in.), six-layer copper\u003c\/li\u003e\n\u003cli\u003eSensitivity: 86.5 dB SPL\u003c\/li\u003e\n\u003cli\u003eXmax: 12.5 mm\u003c\/li\u003e\n\u003cli\u003eFs: 25 Hz\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: sealed, from 32 litres\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHertz Cento CS 300 S2\u003c\/h2\u003e\n\u003cp\u003e300 (12) mm (in.) | Subwoofer | 700W peak | 2 ohm\u003c\/p\u003e\n\u003ch2\u003eDesigned for compact sealed enclosures\u003c\/h2\u003e\n\u003cp\u003eThe CS 300 S2 is engineered to deliver powerful bass from sealed enclosures starting at just 32 litres. The 2 ohm single voice coil suits amplifiers that are stable into low impedances and enclosures housing more than one subwoofer.\u003c\/p\u003e\n\u003cp\u003eThe compact magnetic group, reduced depth and absence of a rear decompression hole allow the enclosure to be shaped closely around the subwoofer — giving maximum installation flexibility across virtually any vehicle.\u003c\/p\u003e\n\u003cp\u003eA six-layer copper voice coil wound on a high thermal resistance glass fibre former uses a dedicated cooling system to keep operating temperature in check during extended high-volume listening. An air channel formed by the spider support directs airflow towards venting holes in the basket, reducing turbulence and acoustic distortion at high excursions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElectroacoustic design optimised for sealed enclosures from 32 litres.\u003c\/li\u003e\n\u003cli\u003eFluid dynamic optimisation system reduces acoustic distortion caused by air compression at high excursions.\u003c\/li\u003e\n\u003cli\u003ePolypropylene cone and dust cap geometry engineered through FEM simulations for low-frequency distortion reduction.\u003c\/li\u003e\n\u003cli\u003e35 mm 2 ohm voice coil wound on six layers of pure copper on a high thermal resistance glass fibre support.\u003c\/li\u003e\n\u003cli\u003eMagnetic group geometry optimised with proprietary software for high undistorted SPL at high excursions.\u003c\/li\u003e\n\u003cli\u003eCompact size and no decompression hole make it ideal for custom-shaped enclosures.\u003c\/li\u003e\n\u003cli\u003eTerminal block with solid push contacts accepts cables up to 8 AWG — low wiring resistance, easy connection in multi-subwoofer installations.\u003c\/li\u003e\n\u003cli\u003eRubber-protected magnetic assembly and high-strength ABS plastic gasket for optional grille fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe cone geometry, suspension and spider were designed using FEM (Finite Element Method) simulations to ensure control and low distortion at high mechanical excursions.\u003c\/p\u003e\n\u003cp\u003eThe optional CG 300 grille in robust black metal mesh protects the subwoofer and features the Hertz diamond aluminium logo for a clean, integrated finish.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45713064624394,"sku":"90768","price":199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-cento-cs-300-s2-sub-12-inch-30cm-300mm-car-subwoofer-2ohm-350w-rms-47166249763082.jpg?v=1748431565"},{"product_id":"jl-audio-12w3v3-4-12-30cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-1","title":"JL Audio 12W3v3-4 12\" 30cm W3 Series Car Sub Subwoofer Driver 4ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W3v3-4 is a 12-inch (300 mm) W3 Series subwoofer driver with a single 4 ohm voice coil and 500W RMS power handling, designed for medium power systems in compact sealed or ported enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 4 ohm version. The W3 Series 12-inch subwoofer is also available in \u003ca href=\"\/products\/jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-1\"\u003e2 ohm (12W3v3-2)\u003c\/a\u003e. The W3 Series is also available as the \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8W3V3-4 8-inch (200 mm) 4 ohm driver\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 1.125 cu ft (31.8 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 1.75 cu ft (49.6 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 6.65 in \/ 169 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.510 in \/ 13.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW3v3 12-inch subwoofer (500W, 4 ohm)\u003c\/h2\u003e\n\u003cp\u003eThe 12W3v3-4 is a 12-inch driver built for medium power applications, using several exclusive JL Audio technologies and proprietary assembly techniques to improve linearity and reliability. It works best with 150–500W of amplifier power in a compact 1.125 cu ft (31.8 l) sealed enclosure or a 1.75 cu ft (49.6 l) ported enclosure.\u003c\/p\u003e\n\n\u003ch2\u003eDynamic Motor Analysis – DMA Optimised Motor\u003c\/h2\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis (DMA) system is an FEA-based modelling suite first developed in 1997. It directly addresses speaker motor linearity, reducing distortion and improving transient accuracy — the result is tight, clean, articulate bass.\u003c\/p\u003e\n\n\u003ch2\u003eElevated Frame Cooling\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design channels cool air through slots directly above the top-plate to the voice coil. This improves power handling and reduces dynamic parameter shifts and power compression for better sound quality.\u003c\/p\u003e\n\n\u003ch2\u003eFloating Cone Attach Method – FCAM™\u003c\/h2\u003e\n\u003cp\u003eThis JL Audio assembly technique ensures correct surround geometry in the finished driver for improved excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\n\u003ch2\u003eVented Reinforcement Collar\u003c\/h2\u003e\n\u003cp\u003eJL Audio's Vented Reinforcement Collar (VRC®) strengthens the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713127178506,"sku":"90934","price":379.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w3v3-4-12-30cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-47166357143818.jpg?v=1748429621"},{"product_id":"jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-1","title":"JL Audio 12W3v3-2 12\" 30cm W3 Series Car Sub Subwoofer Driver 2ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W3v3-2 is a 12\" (300 mm) W3 Series car subwoofer driver with a single 2 ohm voice coil and 500W RMS power handling, designed for clean, powerful bass in medium power systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 2 ohm version. The W3v3 12\" is also available as the \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8W3V3-4 8\" W3 Series subwoofer\u003c\/a\u003e in an 8\" size.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 1.25 cu ft (35.4 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 1.75 cu ft (49.6 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 6.65 in \/ 169 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.510 in \/ 13.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12W3v3-2: 12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/h2\u003e\n\u003cp\u003eThis 12\" driver delivers potent performance and world-class sound quality in medium power applications. JL Audio's exclusive technologies and proprietary assembly techniques are applied throughout to enhance linearity and reliability.\u003c\/p\u003e\n\u003cp\u003eThe 12W3v3-2 works best with amplifier power in the 150W–500W range. It is optimised for a compact 1.25 cu ft (35.4 l) sealed enclosure, or a 1.75 cu ft (49.6 l) ported enclosure. Full enclosure recommendations are available in the Specifications tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713127801098,"sku":"90933","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w3v3-2-12-30cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-47166358159626.jpg?v=1748429627"},{"product_id":"jl-audio-cp112-w0v3-sub-12-single-w0-basswedge-ported-subwoofer-300w-rms","title":"JL Audio CP112-W0V3 Sub 12\" Single W0 BassWedge Ported Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CP112-W0V3 is a slot-ported BassWedge enclosed subwoofer system loaded with a single 12\" 12W0v3-4 driver, rated at 300W RMS at 4 Ω. It is part of JL Audio's W0 series and arrives wired, loaded, and ready to connect.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIt ships wired and loaded with a push-button terminal, requiring only an amplifier delivering 75 to 300W to get going.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: Single 12\" 12W0v3-4\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75 – 300W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003eEnclosure: Slot-ported BassWedge, MDF construction\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 414 x 386 x 516 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 15 kg\u003c\/li\u003e\n\u003cli\u003eGrille included: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCP112-W0v3: Single 12W0v3 BassWedge, ported, 4 Ω\u003c\/h2\u003e\n\n\u003cp\u003eEnclosed subwoofer system with a single \u003cstrong\u003e12W0v3-4\u003c\/strong\u003e subwoofer in a slot-ported BassWedge enclosure. Finished in dark grey automotive carpet, rated at 300W RMS, 4 Ω.\u003c\/p\u003e\n\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer, producing strong extension and smooth response. The port mouth is flared to minimise air-flow noise.\u003c\/p\u003e\n\n\u003cp\u003eThe BassWedge™ shape features extended sides so the enclosure can be positioned with the woofer firing outward or straight down, off the vehicle floor. It works equally well in forward or rear-firing installations, giving you flexibility to optimise loading for your vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFinish: Dark grey, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth\u003c\/li\u003e\n\u003cli\u003eConstruction: MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75 – 300W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 Ω\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713139761418,"sku":"90988","price":309.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp112-w0v3-sub-12-single-w0-basswedge-ported-subwoofer-300w-rms-47166371397898.jpg?v=1748429589"},{"product_id":"jl-audio-cp212-w0v3-12-30cm-dual-12w0v3-basswedge-ported-subwoofer-600w-rms-1","title":"JL Audio CP212-W0v3 12\" 30cm Dual 12W0v3 BassWedge Ported Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CP212-W0v3 is a ready-to-install BassWedge enclosed subwoofer system housing two 12W0v3-4 drivers in a slot-ported MDF enclosure, rated at 600W RMS at 2 ohms. It is part of JL Audio's W0v3 BassWedge range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrivers: two 12 inch 12W0v3-4\u003c\/li\u003e\n\u003cli\u003eEnclosure: slot-ported BassWedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 600W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–600W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: not included\u003c\/li\u003e\n\u003cli\u003eDimensions: 797 mm W x 386 mm H x 516 mm D (400 mm top depth)\u003c\/li\u003e\n\u003cli\u003eWeight: 27.35 kg\u003c\/li\u003e\n\u003cli\u003eTerminal: push-button\u003c\/li\u003e\n\u003cli\u003eFinish: dark grey high-grade automotive carpet with \"JL AUDIO\" embroidery\u003c\/li\u003e\n\u003cli\u003eConstruction: MDF\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCP212-W0v3 Dual 12W0v3 BassWedge Enclosed Subwoofer System, Ported, Dark Gray Carpet (600 W, 2 Ω)\u003c\/h2\u003e\n\n\u003cp\u003eA ready-to-install dual subwoofer system built around two 12W0v3-4 drivers in a slot-ported BassWedge enclosure. Ships wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers, delivering strong extension and smooth response. The port mouth is flared to minimise airflow noise.\u003c\/p\u003e\n\n\u003cp\u003eThe BassWedge shape features extended sides so the unit can be positioned with the woofers firing outward or straight down, off the vehicle floor. It works equally well in forward or rear-firing installations, giving flexibility to tune the enclosure's loading in your vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFinish: dark grey, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge\" embroidered on the port mouth\u003c\/li\u003e\n\u003cli\u003eConstruction: MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–600W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 Ω\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713141203210,"sku":"90991","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp212-w0v3-12-30cm-dual-12w0v3-basswedge-ported-subwoofer-600w-rms-47166373232906.jpg?v=1748429591"},{"product_id":"jl-audio-12w0v3-4-12-30cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 12W0v3-4 12\" 30cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W0v3-4 is a 12\" (300 mm) single 4-ohm subwoofer driver from the W0 Series, rated at 300W RMS. It features a 2\" voice coil and JL Audio's patented Elevated Frame Cooling design, suited to amplifier power in the 75–300W range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 12\". The W0v3 range is also available in \u003ca href=\"\/products\/jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms\"\u003e10\" (10W0v3-4)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12\" (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eVoice coil diameter: 2\"\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 1.375 cu ft (38.9 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 1.75 cu ft (49.6 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 5.40 in \/ 137 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.45 in \/ 11.4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12W0v3-4: 12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/h2\u003e\n\n\u003cp\u003eThe 12WØv3 delivers strong efficiency, excursion capability and linearity, placing it at the top of its price class. It uses a beefy 2\" diameter voice coil and JL Audio's patented Elevated Frame Cooling design for enhanced power handling and reliability.\u003c\/p\u003e\n\n\u003cp\u003eBest used with 75–300W of amplifier power, the 12WØv3 is optimised for a 1.375 cu ft (38.9 l) sealed enclosure or a 1.75 cu ft (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the Specifications tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713141956874,"sku":"90930","price":189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w0v3-4-12-30cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166374215946.jpg?v=1748429583"},{"product_id":"jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 12W1v3-4 12\" 30cm W1 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W1v3-4 is a 12\" (300 mm) single 4-ohm voice coil subwoofer driver from the W1 Series, rated at 300W RMS. It is a shallow-mount, lightweight driver suited to moderate-power systems of 75–300W, optimised for a compact sealed enclosure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 4-ohm version. The 12W1v3 is also available as the \u003ca href=\"\/products\/jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms\"\u003e12W1v3-2 with a single 2-ohm voice coil\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 1.10 cu ft (31.15 l)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 5.41 in \/ 137 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.45 in \/ 11 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW1v3 12-inch Subwoofer Driver (300W, 4Ω)\u003c\/h2\u003e\n\n\u003cp\u003eA capable, no-fuss 12-inch subwoofer that delivers strong sub-bass performance without needing a large enclosure or high amplifier power.\u003c\/p\u003e\n\n\u003cp\u003eThe 12W1v3 is a lightweight 12-inch driver with solid performance at moderate power levels. Its shallow mounting depth and absence of a pole-vent mean the rear of the motor structure can sit directly against an enclosure boundary. Strong excursion capability and linearity allow it to reproduce deep sub-bass with real extension and clarity. Several of JL Audio's proprietary technologies support its performance and long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003eThe 12W1v3-4 works best with amplifier power in the 75–300W range and is optimised for a compact sealed enclosure of 1.10 cu ft (31.15 l). Full enclosure recommendations are available in the Specifications tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713143857418,"sku":"90932","price":264.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166378705162.jpg?v=1748429574"},{"product_id":"jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms","title":"JL Audio 12W1v3-2 12\" 30cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W1v3-2 is a 12\" (300 mm) single 2 ohm voice coil subwoofer driver from the W1 Series, handling 300W RMS. It is a shallow-mount, lightweight driver suited to moderate-power systems and compact sealed enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 2 ohm version. The 12W1v3 is also available as the \u003ca href=\"\/products\/jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms\"\u003e12W1v3-4 with a single 4 ohm voice coil\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 1.10 cu ft (31.15 l)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 5.41 in \/ 137 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.45 in \/ 11 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12W1v3-2: 12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/h2\u003e\n\n\u003cp\u003eThe 12W1v3 is a lightweight 12-inch driver that delivers strong bass performance at moderate power levels. Its shallow mounting depth and no pole-vent design allow the rear of the motor to sit flush against an enclosure wall. Strong excursion capability and linear movement deliver deep sub-bass extension with clarity. Several JL Audio proprietary technologies improve both performance and long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003eThe 12W1v3-2 works best with amplifier power between 75W and 300W RMS and is optimised for a compact sealed enclosure of 1.10 cu ft (31.15 l). Full enclosure recommendations are available in the Specifications tab.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713149657354,"sku":"90931","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms-47166389846282.jpg?v=1748429566"},{"product_id":"jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms","title":"JL Audio ACP112LG-TW1 12” Active Subwoofer MicroSub+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio ACP112LG-TW1 is a complete amplified subwoofer system from the MicroSub+ range, combining a single 12-inch 12TW1-0.25 driver in a slot-ported, low-profile MDF enclosure with a built-in 400W RMS DCD Class D amplifier at 0.25 ohm.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOther MicroSub+ sizes: \u003ca href=\"\/products\/jl-audio-acp108lg-w3v3-8-active-subwoofer-microsub-dcd-amplifier-250w-rms\"\u003eACP108LG-W3v3\u003c\/a\u003e and \u003ca href=\"\/products\/jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms\"\u003eACP110LG-TW1\u003c\/a\u003e. The optional \u003ca href=\"\/products\/jl-audio-rbc-1-remote-bass-level-control-for-jd-jx-mx-rd-series-amps-amplifiers\"\u003eJL Audio RBC-1 remote bass level control\u003c\/a\u003e lets you adjust subwoofer level from the driver's seat (sold separately).\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12-inch 12TW1-0.25\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifier: 400W DCD Class D @ 0.25 ohm\u003c\/li\u003e\n\u003cli\u003eEnclosure: slot-ported, low-profile, CNC-cut MDF\u003c\/li\u003e\n\u003cli\u003eInputs: RCA (70 mV – 1.40 V) and high-level speaker (280 mV – 5.4 V)\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50–200 Hz, 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003eRemote level control: optional (RBC-1)\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 603 x 400 x 235 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 18.33 kg\u003c\/li\u003e\n\u003cli\u003eFuse: 30 A (ATO or ATC); 8 AWG power\/ground wire recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eACP112LG-TW1: Single 12TW1 MicroSub+ with DCD Amplifier, Ported, 0.25 Ω\u003c\/h2\u003e\n\n\u003cp\u003eThe MicroSub+ system has the amplifier built directly into the enclosure. It uses JL Audio's DCD amplifier technology, which combines direct power conversion with an ultra-high current output section — eliminating a conventional switching power supply and delivering 400W with high efficiency.\u003c\/p\u003e\n\n\u003cp\u003eThe slot-ported enclosure is precisely tuned to the 12TW1 driver. Extensive internal bracing allows thinner wall material, maximising internal volume relative to external size. The port wraps around two walls to achieve a low tuning frequency for good bass extension and smooth response. Flared port entry and exit reduce air-flow noise.\u003c\/p\u003e\n\n\u003cp\u003eIntegration with OEM and aftermarket head units is straightforward, with RCA and high-level inputs and automatic turn-on via signal sensing or DC offset sensing. A variable low-pass filter (50–200 Hz) and output polarity switch are included. A quick-disconnect power connector makes removal easy when you need the boot space back.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e DCD amplified systems require specific matched components. Never use a DCD amplifier or its companion driver with non-DCD products — doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\n\u003cp\u003eFinish: Black high-grade automotive carpet with silver \"JL AUDIO\" embroidery on the front baffle. A steel mesh grille is included.\u003c\/p\u003e\n\n\u003cp\u003eConstruction: CNC-cut high-grade MDF\u003c\/p\u003e\n\n\u003cp\u003eNominal impedance: 0.25 Ω\u003c\/p\u003e\n\n\u003cp\u003eEnclosure and subwoofer built in USA with global components.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713203429642,"sku":"90948","price":759.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms-47166442045706.jpg?v=1748429290"},{"product_id":"jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms","title":"JL Audio ACS112LG-TW1  12” Active Subwoofer PowerWedge+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio ACS112LG-TW1 is a 12-inch active subwoofer system from JL Audio's PowerWedge+™ range, pairing a single 12TW1-0.25 shallow driver with a built-in 400W RMS DCD™ Class D amplifier in a sealed, low-profile enclosure just 168 mm (6.625 in) deep.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 12-inch version. The PowerWedge+™ range is also available in a \u003ca href=\"\/products\/jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms\"\u003e10-inch version (ACS110LG-TW1)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 1 x 12-inch 12TW1-0.25\u003c\/li\u003e\n\u003cli\u003eAmplifier: built-in DCD™ Class D, 400W RMS @ 0.25 Ω\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, low-profile, CNC-cut MDF\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50 Hz – 200 Hz, 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003eInputs: RCA (70 mV – 1.40 V) and high-level (280 mV – 5.4 V)\u003c\/li\u003e\n\u003cli\u003eTurn-on: automatic (signal sensing or DC offset sensing)\u003c\/li\u003e\n\u003cli\u003eDimensions: 533 x 343 x 168 mm (W x H x D)\u003c\/li\u003e\n\u003cli\u003eWeight: 13.24 kg\u003c\/li\u003e\n\u003cli\u003eFuse: 30 A; recommended wire 8 AWG\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 0.25 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJL Audio ACS112LG-TW1: single 12TW1 PowerWedge+™ with DCD™ amplifier\u003c\/h2\u003e\n\n\u003cp\u003eComplete amplified subwoofer system featuring a single 12TW1-0.25 driver, a built-in 400W Class D amplifier, and a black carpeted sealed enclosure. System impedance: 0.25 Ω.\u003c\/p\u003e\n\n\u003cp\u003ePowerWedge+™ systems house the amplifier directly within the subwoofer enclosure. The ACS112LG-TW1 uses JL Audio's exclusive DCD™ amplifier technology, which combines direct power conversion with an ultra-high current output section. This eliminates conventional switching power supplies, allowing the amplifier to drive the ultra low-impedance 12TW1 driver at high power with excellent efficiency.\u003c\/p\u003e\n\n\u003cp\u003eThe enclosure has been engineered to the optimum sealed alignment for the 12TW1 driver and fine-tuned through real-world listening. At just 168 mm (6.625 in) deep, it is designed to deliver genuine sub-bass while preserving as much boot space as possible.\u003c\/p\u003e\n\n\u003cp\u003eIntegration with OEM and aftermarket head units is straightforward. The unit accepts both RCA and high-level inputs and turns on automatically via signal sensing or DC offset sensing. A variable low-pass filter (50–200 Hz) and output polarity control switch are included. An optional RBC-1 remote level control (sold separately) allows subwoofer level adjustment from the driver's seat. A quick-disconnect power connector makes removal easy when boot space is needed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\n\u003cp\u003eFinish: Black, high-grade automotive carpet with silver \"JL AUDIO\" embroidery on the front baffle. A steel mesh grille is included.\u003c\/p\u003e\n\n\u003cp\u003eConstruction: CNC-cut high-grade MDF. Enclosure and subwoofer built in USA with global components.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713207623946,"sku":"90951","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms-47166444568842.jpg?v=1748429258"},{"product_id":"jl-audio-cs112tg-tw3-subwoofer-12-tw3-powerwedge-sealed-sub-enclosure-400w-rms","title":"JL Audio CS112TG-TW3 Subwoofer 12\" TW3 PowerWedge Sealed Sub Enclosure 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CS112TG-TW3 is a sealed Truck PowerWedge enclosed subwoofer system from JL Audio's TW3 range, built around a single 12-inch 12TW3-D4 driver rated at 400W RMS at 2 ohms. It measures just 178 mm deep at the base and 114 mm at the top, making it a ready-to-install solution for truck cab and other space-restricted installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12-inch 12TW3-D4\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed Truck PowerWedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100–400W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eBase depth: 7 in. (178 mm)\u003c\/li\u003e\n\u003cli\u003eTop depth: 4.5 in. (114 mm)\u003c\/li\u003e\n\u003cli\u003eHeight: 371 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 13.2 kg\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eFinish: black automotive carpet\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003cli\u003eGrille: black steel mesh, included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCS112TG-TW3 Single 12TW3 Truck PowerWedge Enclosed Subwoofer System, Sealed, Black Carpet (400 W, 2 Ω)\u003c\/h2\u003e\n\u003cp\u003eA ready-to-install sealed sub enclosure built around the JL Audio 12TW3, designed to fit where standard boxes won't.\u003c\/p\u003e\n\u003cp\u003eThe wedge profile measures just 7 in. (178 mm) deep at the base and 4.5 in. (114 mm) at the top, making it well suited to truck cab installations with limited space. The enclosure volume and alignment have been optimised specifically for the 12TW3, with real-world listening used to fine-tune the result.\u003c\/p\u003e\n\u003cp\u003eIt arrives wired, loaded and ready to connect. A five-way binding post terminal makes amplifier hookup straightforward.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is covered in black high-grade automotive carpet with \"JL AUDIO\" embroidered in silver on the front baffle. A steel mesh grille is included to protect the driver.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eFinish: black automotive carpet\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 Ω\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100–400W RMS\u003c\/li\u003e\n\u003cli\u003eBase depth: 7 in. (178 mm)\u003c\/li\u003e\n\u003cli\u003eTop depth: 4.5 in. (114 mm)\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003cli\u003eGrille: steel mesh, included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713210540298,"sku":"90997","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs112tg-tw3-subwoofer-12-tw3-powerwedge-sealed-sub-enclosure-400w-rms-47166448959754.jpg?v=1748429244"},{"product_id":"jl-audio-ho112rg-w3v3-subwoofer-12-inch-ho-wedge-ported-sub-enclosure-500w-rms","title":"JL Audio HO112RG-W3V3 Subwoofer 12 Inch HO Wedge Ported Sub Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio HO112RG-W3v3 is a ready-to-connect High Output ported wedge enclosure loaded with a single 12-inch 12W3v3-2 subwoofer, rated at 500W RMS into 2 ohms. It is part of JL Audio's H.O. Wedge enclosure range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12-inch 12W3v3-2\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure type: chamber-coupled, slot-ported, rear-firing H.O. Wedge\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W (best with 300–500W)\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 819 x 387 x 343 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 21.27 kg\u003c\/li\u003e\n\u003cli\u003eGrille: aluminium bar grille (three solid bars)\u003c\/li\u003e\n\u003cli\u003eFinish: dark grey high-grade automotive carpet; black carpet on woofer baffle\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJL Audio H.O. Wedge ported enclosure — single 12W3v3-2, 2 ohm\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures are engineered to deliver a combination of strong output and sound quality that is rare in ready-made enclosures.\u003c\/p\u003e\n\u003cp\u003eThe patented chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output directly to the woofer's output. This layout provides the surface area and port length needed to maximise performance from the 12W3v3-2 driver.\u003c\/p\u003e\n\u003cp\u003eThe enclosure has been tuned to the optimum ported alignment for the 12W3v3 through extensive real-world listening. The system performs well with as little as 150W of amplifier power, but is at its best with 300–500W.\u003c\/p\u003e\n\u003cp\u003eThe unit ships wired, loaded and ready to connect via a five-way binding post terminal. The angled-back wedge profile sits tightly against a vehicle's rear seat, keeping boot space loss to a minimum.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: dark grey high-grade automotive carpet; black carpet on woofer baffle; \"JL AUDIO\" embroidered in silver on the top surface\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 ohms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713211588874,"sku":"91012","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho112rg-w3v3-subwoofer-12-inch-ho-wedge-ported-sub-enclosure-500w-rms-47166453055754.jpg?v=1748429247"},{"product_id":"jl-audio-ho112-w6v3-subwoofer-12-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms","title":"JL Audio HO112-W6V3 Subwoofer 12 Inch W6 HO Wedge Ported Sub Enclosure 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio HO112-W6v3 is a loaded, ported 12-inch subwoofer enclosure from JL Audio's W6 H.O. Wedge range, built around a single 12W6v3-D4 driver and rated at 600 W RMS into a 2 ohm system load.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: Single 12W6v3-D4 (12-inch)\u003c\/li\u003e\n\u003cli\u003eContinuous power handling (RMS): 600 W\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200 – 600 W\u003c\/li\u003e\n\u003cli\u003eSystem nominal impedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure: Chamber-coupled, slot-ported, rear-firing H.O. Wedge\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 368 x 406 x 610 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 27.52 kg\u003c\/li\u003e\n\u003cli\u003eGrille included: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHO112-W6v3: Single 12W6v3 H.O. Wedge, ported, 2 ohm\u003c\/h2\u003e\n\u003cp\u003eLoaded ported enclosure housing a single 12W6v3-D4 subwoofer. Finished in dark grey\/black carpet. Rated at 600 W RMS into a 2 ohm system load.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures combine sound quality with high output in a compact package. The 12W6v3's high power handling and modest enclosure requirements keep the overall system size down while remaining capable of impressive output with moderate amplification.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling port output directly to the woofer's output. This provides the surface area and port length needed to maximise W6v3 driver performance. The ported alignment has been engineered specifically for the 12W6v3 and refined through real-world listening.\u003c\/p\u003e\n\u003cp\u003eThe system ships wired, loaded and ready to connect via a five-way binding post terminal. No grille is included, though the recessed mounting baffle offers some woofer protection. A steel mesh grille insert (Model: SGR-12W6v2\/v3) is available separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: Dark grey, high-grade automotive carpet with black carpet on the woofer baffle; \"JL AUDIO\" embroidered in silver on the enclosure side\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200 – 600 W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 ohms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713215881482,"sku":"91010","price":1119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho112-w6v3-subwoofer-12-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms-47166462558474.jpg?v=1748429193"},{"product_id":"jl-audio-ho112r-w7ae-subwoofer-12-inch-w7-ho-wedge-sub-enclosure-1000w-rms","title":"JL Audio HO112R-W7AE Subwoofer 12 Inch W7 HO Wedge Sub Enclosure 1000w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio HO112R-W7AE is a loaded 12-inch High Output wedge enclosure housing a single 12W7AE-3 subwoofer, rated at 1000W RMS at 3 ohms. It is part of JL Audio's W7AE High Output Enclosure range — a ported, ready-to-connect system designed for maximum bass output in a compact, seat-hugging footprint.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12W7AE-3 12-inch subwoofer\u003c\/li\u003e\n\u003cli\u003ePower handling: 1000W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 400–1000W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure type: chamber-coupled, slot-ported, rear-firing wedge\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 864 x 432 x 521 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 53.95 kg\u003c\/li\u003e\n\u003cli\u003eFinish: dark grey \/ black automotive carpet\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eGrille: not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHO112R-W7AE: single 12W7AE H.O. Wedge, ported, 3 Ω\u003c\/h2\u003e\n\u003cp\u003eA loaded enclosure system built around a single 12W7AE-3 subwoofer in a dark grey \/ black carpet, ported enclosure. Rated at 1000W RMS at 3 Ω.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures combine strong sound quality with high output levels. The patented chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling port output directly to the woofer's output. This maximises both surface area and port length to get the best from the 12W7AE-3 driver.\u003c\/p\u003e\n\u003cp\u003eThe enclosure alignment has been optimised specifically for the 12W7AE-3 and refined through extensive real-world listening. The driver's high power handling, combined with the efficiency of the enclosure design, produces a substantial performance combination.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation and design\u003c\/h2\u003e\n\u003cp\u003eThe system ships wired, loaded and ready to connect via a five-way binding post terminal. The recessed mounting baffle offers some protection for the woofer in lieu of a grille. The angled-back wedge shape sits tightly against a vehicle's rear seat, minimising lost boot space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: dark grey, high-grade automotive carpet with black carpet on the woofer baffle; \"JL AUDIO\" embroidered in silver on the top surface\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 400–1000W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 Ω\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713216504074,"sku":"91011","price":1629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho112r-w7ae-subwoofer-12-inch-w7-ho-wedge-sub-enclosure-1000w-rms-47166463443210.jpg?v=1748429181"},{"product_id":"edge-12-inch-active-bass-box-sub-subwoofer-ported-enclosure-edb12a-300w-rms","title":"Edge 12 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB12A 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Edge EDB12A-E0 is a 12-inch active subwoofer in a ported enclosure with a built-in Edge amplifier, rated at 300W RMS and 900W peak. Part of the Edge bass enclosure range, it delivers deep bass straight out of the box with no separate amplifier needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 12-inch EDB12A. The Edge active bass enclosure range is also available in \u003ca href=\"\/products\/edge-10-inch-active-bass-box-sub-subwoofer-ported-enclosure-edb10a-250w-rms\"\u003e10-inch EDB10A (250W RMS)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 12-inch Edge driver\u003c\/li\u003e\n\u003cli\u003ePower: 300W RMS, 900W peak\u003c\/li\u003e\n\u003cli\u003eAmplifier: built-in Edge 72100 amp\u003c\/li\u003e\n\u003cli\u003eEnclosure: ported, with side-mounted port for a compact design\u003c\/li\u003e\n\u003cli\u003eConstruction: high-density MDF, finished in carpet with Edge detailing\u003c\/li\u003e\n\u003cli\u003eCooling: anodised extruded aluminium heatsink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEdge EDB12A-E0 12-inch V2 active enclosure\u003c\/h2\u003e\n\u003cp\u003eThe Edge EDB12A-E0 pairs a 12-inch subwoofer driver with a matched built-in Edge amplifier inside a ported MDF enclosure. No separate amplifier or enclosure is required — just connect and go.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300W RMS output\u003c\/li\u003e\n\u003cli\u003e12-inch subwoofer driver\u003c\/li\u003e\n\u003cli\u003ePorted enclosure design\u003c\/li\u003e\n\u003cli\u003eBuilt-in Edge amplifier\u003c\/li\u003e\n\u003cli\u003eCarpet finish with Edge detailing\u003c\/li\u003e\n\u003cli\u003ePlug-and-play active setup, no separate amp required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Edge","offers":[{"title":"Default Title","offer_id":45713231806730,"sku":"90434","price":149.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/edge-subwoofer-edge-12-inch-active-bass-box-sub-subwoofer-ported-enclosure-edb12a-300w-rms-47166491197706.jpg?v=1748431405"},{"product_id":"jl-audio-12tw3-d4-12-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms","title":"JL Audio 12TW3-D4 12 Inch TW3 Series Shallow Mount Subwoofer Dual 4 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12TW3-D4 is a 12-inch (300 mm) shallow-mount subwoofer from the TW3 Series, with dual 4 ohm voice coils and 400W RMS power handling. Its mounting depth of just 3.5 in (89 mm) and minimal sealed enclosure requirements make it suited to vehicles with limited installation space.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the dual 4 ohm version. The 12TW3 is also available in \u003ca href=\"\/products\/jl-audio-12tw3-d8-12-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms\"\u003edual 8 ohm (12TW3-D8)\u003c\/a\u003e, and the TW3 Series is also available as the \u003ca href=\"\/products\/jl-audio-10tw3-d4-10-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms\"\u003e10-inch 10TW3-D4\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–400W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm (dual voice coil)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 3.5 in \/ 89 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.625 in \/ 295 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.6 in \/ 15.2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12TW3-D4 shallow-mount subwoofer\u003c\/h2\u003e\n\n\u003cp\u003eThe TW3 builds on the core technology of JL Audio's TW5 thin-line subwoofers, combining shallow mounting depth with high excursion capability — exceeding that of the W3v3 Series drivers.\u003c\/p\u003e\n\n\u003cp\u003eJL Audio's patented thin-line woofer technology achieves this using a \"concentric tube\" structure moulded into the cone body. This supports the voice coil and a full annular spider, while positioning the large motor structure further forward than conventional designs allow.\u003c\/p\u003e\n\n\u003cp\u003eTW3s are optimised for small enclosures and use a tab-ear mounting design to maximise cone area within their mounting footprint.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (3.25 \/ 3.50 inches)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to the rear wall of an enclosure\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion capability (0.60 in \/ 15.2 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003e\"Concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminium-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713248911626,"sku":"90928","price":479.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw3-d4-12-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms-47166521016586.jpg?v=1748429742"},{"product_id":"jl-audio-12tw3-d8-12-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms","title":"JL Audio 12TW3-D8 12 Inch TW3 Series Shallow Mount Subwoofer Dual 8 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12TW3-D8 is a 12-inch (300 mm) shallow mount subwoofer from the TW3 Series, rated at 400W RMS with dual 8 ohm voice coils and a mounting depth of just 3.5 in (89 mm).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the dual 8 ohm version. The TW3 12-inch is also available in \u003ca href=\"\/products\/jl-audio-12tw3-d4-12-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms\"\u003edual 4 ohm (12TW3-D4)\u003c\/a\u003e, and the TW3 Series includes a \u003ca href=\"\/products\/jl-audio-10tw3-d4-10-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms\"\u003e10-inch model (10TW3-D4)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–400W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 8 ohm (dual voice coil)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 3.5 in \/ 89 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.625 in \/ 295 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.6 in \/ 15.2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12TW3-D8 Shallow Mount: 12-inch (300 mm) Subwoofer Driver, Dual 8 Ω\u003c\/h2\u003e\n\n\u003cp\u003eBuilt on the same core technology as JL Audio's TW5 thin-line subwoofers, the TW3 Series combines shallow mounting depth with high excursion capability — exceeding that of the W3v3s. JL Audio's patented thin-line woofer technology achieves this via a \"concentric tube\" structure moulded into the cone body, which supports the voice coil and a full annular spider while positioning the motor further forward than conventional designs allow.\u003c\/p\u003e\n\n\u003cp\u003eTW3s are optimised for small sealed enclosures and use a tab-ear mounting design to maximise cone area within the mounting footprint.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth: 3.25 \/ 3.50 inches\u003c\/li\u003e\n\u003cli\u003eNo pole vent — allows mounting close to the rear wall of an enclosure\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eLong linear excursion: 0.60 in \/ 15.2 mm (one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003e\"Concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminium-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713249763594,"sku":"90929","price":419.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw3-d8-12-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms-47166523834634.jpg?v=1748429730"},{"product_id":"jl-audio-12tw1-4-12-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms","title":"JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12TW1-4 is a 12-inch (300 mm) shallow-mount subwoofer from the TW1 series, rated at 300W RMS with a single 4 ohm voice coil. Its 117 mm mounting depth and 0.65 cu ft (18.4 litre) sealed enclosure requirement make it suited to under-seat, truck and sports car installations where a standard 12-inch driver won't fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 4 ohm version. The TW1 12-inch is also available in \u003ca href=\"\/products\/jl-audio-12tw1-2-12-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms\"\u003e2 ohm (12TW1-2)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 0.65 cu ft (18.4 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 4.62 in \/ 117 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.40 in \/ 10.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12TW1-4: 12-inch (300 mm) Subwoofer Driver, 4 Ω\u003c\/h2\u003e\n\n\u003ch3\u003eTW1 12-inch Subwoofer (300 W, 4 Ω)\u003c\/h3\u003e\n\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 12TW1 combines a shallow mounting depth with strong excursion capability, operating in a sealed enclosure as small as 0.65 cu ft (18.4 litres). A cast alloy frame design keeps the overall profile low, making it a practical choice for under-seat truck installs, two-seat sports cars and other space-restricted applications.\u003c\/p\u003e\n\n\u003cp\u003eJL Audio's patented thin-line technology uses a \"concentric tube\" structure built into the injection-moulded cone body. This supports the voice coil and a full annular spider whilst allowing a large motor structure to sit further forward than conventional designs permit.\u003c\/p\u003e\n\n\u003cp\u003eThe frame design minimises the frontal clearance needed during excursion by recessing the suspension attachment surface, so most forward movement stays within the frame's own dimensions. The result is just 0.87 inches (22 mm) of frontal clearance required — grille included — allowing more enclosure volume within a given overall depth.\u003c\/p\u003e\n\n\u003cp\u003eDespite being optimised for a much smaller enclosure than any other JL Audio 12-inch subwoofer, the 12TW1 delivers rich, deep, controlled bass rather than the strained sound of an oversized driver in too small a box.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth: 4.62 in \/ 117 mm\u003c\/li\u003e\n\u003cli\u003eNo pole vent — can mount close to the rear wall of the enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirement\u003c\/li\u003e\n\u003cli\u003eLong linear excursion: 0.40 in \/ 10 mm (one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory using global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713252286730,"sku":"90927","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw1-4-12-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms-47166528815370.jpg?v=1748429719"},{"product_id":"jl-audio-12tw1-2-12-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms","title":"JL Audio 12TW1-2 12 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12TW1-2 is a 12-inch (300 mm) shallow-mount subwoofer from the TW1 series, with a single 2 ohm voice coil and 300W RMS power handling. Its 117 mm mounting depth and 0.65 cu ft (18.4 litre) sealed enclosure requirement make it suited to under-seat, truck and sports car installations where a standard 12-inch driver will not fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 2 ohm version. The TW1 12-inch is also available in \u003ca href=\"\/products\/jl-audio-12tw1-4-12-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms\"\u003e4 ohm (12TW1-4)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 0.65 cu ft (18.4 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 4.62 in \/ 117 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 11.0625 in \/ 281 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.40 in \/ 10.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e12TW1-2: 12-inch (300 mm) Subwoofer Driver, 2 Ω\u003c\/h2\u003e\n\n\u003ch3\u003eTW1 12-inch Subwoofer (300 W, 2 Ω)\u003c\/h3\u003e\n\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 12TW1 combines a shallow mounting depth with strong excursion capability, while working in a very small enclosure (0.65 cu ft \/ 18.4 litres). A special cast alloy frame design allows it to operate in extremely tight spaces — including under-seat installs in trucks, two-seat sports cars, and other applications where a low-profile 12-inch driver is needed.\u003c\/p\u003e\n\n\u003cp\u003eJL Audio's patented thin-line technology compresses the driver architecture using a \"concentric tube\" structure built into the injection-moulded cone body. This supports the voice coil and a full annular spider, while allowing the motor structure to sit further forward than in conventional designs.\u003c\/p\u003e\n\n\u003cp\u003eThe frame design minimises the frontal clearance needed during excursion by recessing the suspension attachment surface, so most forward excursion occurs within the frame's own dimensions. The result is just 0.87 inches (22 mm) of frontal clearance required — even with the grille fitted — allowing more efficient use of space and greater enclosure volume within a given overall depth.\u003c\/p\u003e\n\n\u003cp\u003eDespite being optimised for a much smaller enclosure than any other JL Audio 12-inch subwoofer, the 12TW1 delivers rich, deep, controlled bass rather than the strained sound of an oversized driver in too small a box.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth (4.62 in \/ 117 mm)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to the rear wall of the enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirement\u003c\/li\u003e\n\u003cli\u003eLong linear excursion capability (0.40 in \/ 10 mm, one-way)\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713253794058,"sku":"90926","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12tw1-2-12-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms-47166529929482.jpg?v=1748429718"},{"product_id":"jl-audio-12w7ae-3-w7-series-anniversary-edition-12-inch-sub-subwoofer-1000w-rms","title":"JL Audio 12W7AE-3 W7 Series Anniversary Edition 12 Inch Sub Subwoofer 1000w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W7AE-3 is a 12-inch (300 mm) subwoofer driver rated at 1000 W RMS with a 3 Ω nominal impedance, part of the W7 Anniversary Edition range. It suits high-end car audio systems requiring long-excursion, low-distortion bass from amplifiers in the 400–1000 W RMS range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is optimised for a 1.375 cu ft (38.9 litre) sealed enclosure or a 1.75 cu ft (49.6 litre) ported enclosure.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 in \/ 300 mm\u003c\/li\u003e\n\u003cli\u003ePower handling: 1000 W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 400–1000 W RMS\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 Ω\u003c\/li\u003e\n\u003cli\u003eXmax (one-way): 29 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 241 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 267 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 20.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e10th Anniversary Edition W7 12-inch subwoofer (1000 W, 3 Ω)\u003c\/h2\u003e\n\u003cp\u003eThe 12W7AE combines the long-excursion W7 design with a large 12-inch bore. Reviewers have described it as \"addictive\", \"seductive\" and \"the new subwoofer reference\" for its dynamics, balance and sound quality.\u003c\/p\u003e\n\u003cp\u003eBest used with 400–1000 W RMS of amplifier power, it is optimised for a 1.375 cu ft (38.9 l) sealed enclosure or a 1.75 cu ft (49.6 l) ported enclosure. Full parameters are listed in the Specification tab.\u003c\/p\u003e\n\u003cp\u003eW7AE subwoofers celebrate the 10th anniversary of the W7 subwoofer launch. Functionally identical to the original W7, they are distinguished by the following cosmetic differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-black powder-coated baskets\u003c\/li\u003e\n\u003cli\u003eBright anodised surround clamp ring\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition cone badge\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition terminal label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eW-Cone\u003c\/h2\u003e\n\u003cp\u003eThe W-Cone is a unit-body cone assembly offering very high stiffness with minimal mass. Its shape provides superb torsional rigidity, which is critical for maintaining voice coil alignment at the suspension limits.\u003c\/p\u003e\n\u003ch2\u003eOverRoll surround\u003c\/h2\u003e\n\u003cp\u003eThis design makes use of space wasted in conventional speakers, controlling the W7's large excursion without sacrificing cone area.\u003c\/p\u003e\n\u003ch2\u003eFloating Cone Attach Method (FCAM)\u003c\/h2\u003e\n\u003cp\u003eThis JL Audio assembly technique ensures correct surround geometry in the finished driver for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\u003ch2\u003eRadially cross-drilled pole piece\u003c\/h2\u003e\n\u003cp\u003eThis venting system directs airflow onto the voice coil former, working alongside Elevated Frame cooling technology to enhance thermal dissipation and power handling. The result is more linear performance with reduced power compression.\u003c\/p\u003e\n\u003ch2\u003eEngineered lead-wire system\u003c\/h2\u003e\n\u003cp\u003eCarefully designed lead-wire routing and attachments ensure controlled, quiet lead-wire behaviour even under extreme excursion demands.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713270014218,"sku":"90936","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w7ae-3-w7-series-anniversary-edition-12-inch-sub-subwoofer-1000w-rms-47166555848970.jpg?v=1748431525"},{"product_id":"jl-audio-12w6v3-d4-w6-series-12-inch-30cm-dual-4-ohm-car-sub-subwoofer-600w-rms","title":"JL Audio 12W6V3-D4 W6 Series 12 Inch 30cm Dual 4 ohm Car Sub Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 12W6v3-D4 is a 12-inch (300 mm) dual 4 ohm subwoofer from the W6 Series, rated at 600 W RMS. It is designed for powerful, low-distortion sub-bass and works with amplifiers in the 200–600 W range, wired as a 2 ohm or 8 ohm load.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 in \/ 300 mm\u003c\/li\u003e\n\u003cli\u003ePower handling: 600 W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–600 W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 Ω (usable as 2 Ω or 8 Ω)\u003c\/li\u003e\n\u003cli\u003eXmax (one-way): 19 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 191 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 280 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 11.6 kg\u003c\/li\u003e\n\u003cli\u003eOptimised enclosure: 1.0 cu ft (28.3 l) sealed or 1.3 cu ft (36.8 l) ported\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW6v3 12-inch subwoofer (600 W, dual 4 Ω voice coils)\u003c\/h2\u003e\n\u003cp\u003eThe 12W6v3 delivers intensely powerful sub-bass without sacrificing sound quality. It shares several technologies with JL Audio's flagship W7AE subwoofers, providing advantages in motor linearity and suspension behaviour, combined with an efficient cooling circuit for reduced distortion and outstanding dynamic balance.\u003c\/p\u003e\n\u003cp\u003eIt is optimised for a sealed enclosure of just 1.0 cu ft (28.3 l) or a 1.3 cu ft (36.8 l) ported enclosure. Greater excursion capability and higher power handling set it apart from the JL Audio 12W3v3, allowing higher output. The dual 4 Ω voice coils allow use as a 2 Ω or 8 Ω driver.\u003c\/p\u003e\n\n\u003ch2\u003eDynamic Motor Analysis (DMA) optimised motor\u003c\/h2\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis system is an FEA-based modelling suite first developed in 1997 and refined to address speaker motor linearity. The result is greatly reduced distortion and faithfully reproduced transients — tight, clean, articulate bass.\u003c\/p\u003e\n\n\u003ch2\u003eElevated Frame Cooling\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design channels cool air through slots directly above the top plate to the voice coil. This minimises dynamic parameter shifts and power compression, improving both power handling and sound quality.\u003c\/p\u003e\n\n\u003ch2\u003eFloating Cone Attach Method (FCAM)\u003c\/h2\u003e\n\u003cp\u003eThis JL Audio assembly technique ensures correct surround geometry in the finished speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\n\u003ch2\u003ePole-Vent Airflow Control (PVAC)\u003c\/h2\u003e\n\u003cp\u003eIn high-powered subwoofers, thermal management is essential. PVAC controls airflow through the pole vent to help regulate voice coil temperature during demanding use.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713272307978,"sku":"90935","price":759.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-12w6v3-d4-w6-series-12-inch-30cm-dual-4-ohm-car-sub-subwoofer-600w-rms-47166559748362.jpg?v=1748431514"},{"product_id":"jl-audio-cls112rg-w7ae-subwoofer-12-w7-prowedge-sealed-sub-enclosure-1000w-rms","title":"JL Audio CLS112RG-W7AE Subwoofer 12\" W7 ProWedge Sealed Sub Enclosure 1000w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CLS112RG-W7AE is a sealed ProWedge enclosure loaded with a single 12-inch 12W7AE-3 subwoofer, rated at 1000W RMS into 3 ohms. Part of JL Audio's flagship W7AE range, it is a ready-to-connect enclosed subwoofer system built for high-fidelity sub-bass in a compact, angled-back cabinet.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12-inch 12W7AE-3\u003c\/li\u003e\n\u003cli\u003ePower handling: 1000W RMS\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed, rear-firing ProWedge\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 400–1000W\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 540 x 419 x 432 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 37.10 kg\u003c\/li\u003e\n\u003cli\u003eGrille: three solid aluminium bars\u003c\/li\u003e\n\u003cli\u003eFinish: black automotive carpet with gloss-black laminated decorative front baffle trim\u003c\/li\u003e\n\u003cli\u003eConnection: five-way binding post terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJL Audio CLS112RG-W7AE single 12W7AE ProWedge, sealed, 3 ohm\u003c\/h2\u003e\n\n\u003cp\u003eThis sealed ProWedge system harnesses the performance of the W7AE subwoofer in a compact enclosure that delivers extension, impact, detail and smooth response at any listening level.\u003c\/p\u003e\n\n\u003cp\u003eThe enclosure alignment has been engineered specifically for the 12W7AE-3 and refined through extensive real-world listening. It arrives wired, loaded and ready to connect via a five-way binding post terminal.\u003c\/p\u003e\n\n\u003cp\u003eThe angled-back design saves cargo space by sitting tightly against the back of a vehicle's rear seat.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFinish: black high-grade automotive carpet with gloss-black laminated decorative front baffle trim\u003c\/li\u003e\n\u003cli\u003eGrille: three solid aluminium bars for stylish, rugged woofer protection\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 400–1000W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 ohms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713305600266,"sku":"90983","price":1439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cls112rg-w7ae-subwoofer-12-w7-prowedge-sealed-sub-enclosure-750w-rms-47166590288138.jpg?v=1748428922"},{"product_id":"jl-audio-cs112lg-tw3-subwoofer-12-tw3-powerwedge-sealed-sub-enclosure-400w-rms","title":"JL Audio CS112LG-TW3 Subwoofer 12\" TW3 PowerWedge Sealed Sub Enclosure 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CS112LG-TW3 is a ready-to-install sealed PowerWedge enclosure loaded with a single 12TW3-D4 12-inch subwoofer, rated at 400 W RMS into 2 ohms and just 129 mm deep. It is part of JL Audio's TW3 range, designed for strong sub-bass in vehicles where boot space is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12TW3-D4 (12 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 400 W RMS continuous\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100 to 400 W\u003c\/li\u003e\n\u003cli\u003eSystem impedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed PowerWedge, CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eExternal dimensions: W 603 mm x H 397 mm x D 129 mm (23.75 x 15.625 x 5.0625 in)\u003c\/li\u003e\n\u003cli\u003eNet weight: 13.8 kg (30.5 lb)\u003c\/li\u003e\n\u003cli\u003eFinish: black automotive carpet with \"JL AUDIO\" embroidered in silver on the front baffle\u003c\/li\u003e\n\u003cli\u003eGrille: black steel mesh, included\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCS112LG-TW3\u003c\/h2\u003e\n\n\u003cp\u003eThe PowerWedge enclosure is only 5.0625 in. (129 mm) deep. JL Audio engineered the internal volume specifically for the 12TW3-D4 driver and fine-tuned it through real-world listening, delivering strong sub-bass without eating into boot space.\u003c\/p\u003e\n\n\u003cp\u003eIt arrives pre-wired and loaded. Connect it to your amplifier via the five-way binding post terminal and it is ready to go. If you are looking for a compact standalone driver rather than a complete system, JL Audio also offer the \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8W3V3-4 8\" W3 Series subwoofer driver\u003c\/a\u003e from the same W3 family.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100 to 400 W\u003c\/li\u003e\n\u003cli\u003eEnclosure depth: 5.0625 in. (129 mm)\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed\u003c\/li\u003e\n\u003cli\u003eFinish: black automotive carpet\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003cli\u003eGrille: steel mesh, included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713307205898,"sku":"90996","price":559.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs112lg-tw3-subwoofer-12-tw3-powerwedge-sealed-sub-enclosure-400w-rms-47166594810122.jpg?v=1748428908"},{"product_id":"jl-audio-cs112lg-tw1-2-subwoofer-12-tw1-powerwedge-sealed-sub-enclosure-300w","title":"JL Audio CS112LG-TW1-2 Subwoofer 12\" TW1 PowerWedge Sealed Sub Enclosure 300w","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CS112LG-TW1-2 is a sealed, low-profile PowerWedge enclosed subwoofer system from JL Audio's TW1 range, housing a single 12-inch 12TW1-2 driver rated at 300W RMS at 2 ohms. At just 168 mm deep, it delivers 12-inch sub-bass performance where boot space is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 12-inch version. The TW1 PowerWedge is also available in a \u003ca href=\"\/products\/jl-audio-cs110lg-tw1-2-subwoofer-10-tw1-powerwedge-sealed-sub-enclosure-300w\"\u003e10-inch CS110LG-TW1-2\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 12-inch 12TW1-2\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed, low-profile PowerWedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: black steel mesh\u003c\/li\u003e\n\u003cli\u003eDimensions: 457 mm W x 349 mm H x 168 mm D\u003c\/li\u003e\n\u003cli\u003eWeight: 11.80 kg\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCS112LG-TW1-2 Single 12TW1 PowerWedge Enclosed Subwoofer System, Sealed, Black Carpet (300 W, 2 Ω)\u003c\/h2\u003e\n\n\u003cp\u003eThis low-profile PowerWedge enclosure uses the TW1 subwoofer's compact box requirements to deliver serious sub-bass from an enclosure only 168 mm deep.\u003c\/p\u003e\n\n\u003cp\u003eThe enclosure is CNC-cut from high-grade MDF and tuned to the optimum sealed alignment for the 12TW1 driver through extensive real-world listening tests.\u003c\/p\u003e\n\n\u003cp\u003eThe unit ships wired, loaded and ready to connect via the five-way binding post terminal.\u003c\/p\u003e\n\n\u003cp\u003eFinish: black high-grade automotive carpet with \"JL AUDIO\" embroidered in silver on the top surface. A steel mesh grille is included to protect the driver.\u003c\/p\u003e\n\n\u003cp\u003eConstruction: CNC-cut high-grade MDF.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713307336970,"sku":"90995","price":659.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs112lg-tw1-2-subwoofer-12-tw1-powerwedge-sealed-sub-enclosure-300w-47166596022538.jpg?v=1748428899"},{"product_id":"pioneer-ts-a300d4-sub-12-30cm-dual-voice-coil-subwoofer-500w-rms","title":"Pioneer TS-A300D4 Sub 12\" 30cm Dual Voice Coil Subwoofer 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-A300D4 is a 12\" (30 cm) dual voice coil passive subwoofer rated at 500W RMS (1,500W max), part of Pioneer's A-series car audio range. It requires an external enclosure and amplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12\" \/ 30 cm\u003c\/li\u003e\n\u003cli\u003eContinuous power: 500W RMS\u003c\/li\u003e\n\u003cli\u003eMax power: 1,500W\u003c\/li\u003e\n\u003cli\u003eVoice coil: Dual voice coil (DVC), D4 type\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003eCone: Injection moulded polypropylene (IMPP)\u003c\/li\u003e\n\u003cli\u003eTerminals: Push type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUpgrade your sound with powerful bass\u003c\/h2\u003e\n\u003cp\u003eThe TS-A300D4 is a passive driver designed to upgrade your car's original sound system. It pairs with Pioneer's A-series speakers and is designed to be matched with Pioneer's GM-A series amplifiers for powerful, solid bass at any volume.\u003c\/p\u003e\n\u003cp\u003eIf you'd prefer a self-contained solution, Pioneer also offer the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003eTS-WX300A — a powered 12\" subwoofer with a built-in amplifier rated at 350W RMS\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInjection moulded polypropylene (IMPP) cone for outstanding midbass response\u003c\/li\u003e\n\u003cli\u003eDual voice coil design allows flexible wiring configurations\u003c\/li\u003e\n\u003cli\u003ePassive driver — requires an external enclosure and amplifier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713457873162,"sku":"91390","price":79.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/TS-A300_9cbc569b-5fcf-414c-8677-de8b2f24f282.jpg?v=1793180206"},{"product_id":"pioneer-ts-a300s4-sub-12-30cm-single-voice-coil-subwoofer-500w-rms","title":"Pioneer TS-A300S4 Sub 12\" 30cm Single Voice Coil Subwoofer 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-A300S4 is a 30cm (12-inch) single voice coil, 4-ohm subwoofer from Pioneer's A-Series, rated at 500W RMS continuous and 1500W maximum. It is a passive driver requiring an enclosure and external amplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 30cm (12-inch)\u003c\/li\u003e\n\u003cli\u003ePower: 500W continuous, 1500W maximum\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms, single voice coil\u003c\/li\u003e\n\u003cli\u003eCone: injection moulded polypropylene (IMPP™)\u003c\/li\u003e\n\u003cli\u003eTerminals: push type\u003c\/li\u003e\n\u003cli\u003eType: subwoofer driver for use in an enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTS-A300S4: 30cm 4 ohm enclosure-type single voice coil subwoofer (1500W)\u003c\/h2\u003e\n\u003cp\u003eThe TS-A300S4 is designed to complement Pioneer's A-Series speakers, giving your car's sound system a significant bass upgrade. A-Series subwoofers combine quality materials and engineering to improve bass response over factory-fitted drivers.\u003c\/p\u003e\n\u003cp\u003eFor best results, pair it with a Pioneer GM-A series amplifier for powerful, controlled bass at any volume level. If you'd prefer a self-contained solution, the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003ePioneer TS-WX300A is a 12-inch powered subwoofer with a built-in amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding midbass response with the injection moulded polypropylene (IMPP™) cone\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713469341962,"sku":"91391","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/TS-A300.jpg?v=1793180155"},{"product_id":"pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms","title":"Pioneer TS-WX300A Sub Active Powered 12\" Subwoofer Built in Amplifier 350w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-WX300A is a 30 cm (12-inch) active subwoofer in a ported bass reflex enclosure with a built-in Class-D amplifier, rated at 350 W nominal and 1300 W maximum power. Part of Pioneer's active subwoofer range, it is designed for straightforward installation with the amplifier built in and cables included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 30 cm (12-inch)\u003c\/li\u003e\n\u003cli\u003eType: active subwoofer, built-in Class-D amplifier\u003c\/li\u003e\n\u003cli\u003ePower: 350 W nominal, 1300 W maximum\u003c\/li\u003e\n\u003cli\u003eEnclosure: ported, bass reflex design\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 to 130 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 113 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: single, copper round wire 4-layer\u003c\/li\u003e\n\u003cli\u003eWeight: 10.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTS-WX300A\u003c\/h2\u003e\n\u003ch3\u003e30cm Powered Active Subwoofer with Class-D Built-in Amplifier (1300 W), Single Voice Coil\u003c\/h3\u003e\n\n\u003ch2\u003ePowerful bass that is easy to install\u003c\/h2\u003e\n\u003cp\u003eThe TS-WX300A upgrades your vehicle's audio with strong, powerful bass. The amplifier is built in and cables are included, keeping installation straightforward. If you need a more compact option, Pioneer also offer the \u003ca href=\"\/products\/pioneer-ts-wx1010la-powered-active-subwoofer-shallow-sub-bass-remote-300w-rms\"\u003eTS-WX1010LA powered active subwoofer\u003c\/a\u003e, a shallow design rated at 300 W RMS.\u003c\/p\u003e\n\u003cp\u003eThe TS-WX300A uses a pulp woofer cone for solid, rhythmical bass.\u003c\/p\u003e\n\u003cp\u003eThe Class-D amplifier is built into the side of the enclosure, amplifying bass to high volumes while saving space and installation time. Adjustable settings let you tailor the bass to your taste in music.\u003c\/p\u003e\n\u003cp\u003eThe TS-WX300A is a 30 cm subwoofer in a ported, bass reflex design enclosure, delivering 1300 W maximum power and 350 W nominal power.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713477468426,"sku":"91420","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms-47166800658698.jpg?v=1748432714"},{"product_id":"pioneer-ts-a300b-sub-12-enclosed-slot-port-bass-box-subwoofer-500w-rms","title":"Pioneer TS-A300B Sub 12\" Enclosed Slot Port Bass Box Subwoofer 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-A300B is a 12-inch (30cm) A-Series enclosed slot-port subwoofer rated at 500W RMS (1500W max) — a ready-made sub and box package designed to deliver powerful bass.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch \/ 30cm\u003c\/li\u003e\n\u003cli\u003eType: Enclosed slot-port subwoofer\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS \/ 1500W max\u003c\/li\u003e\n\u003cli\u003eCone: IMPP™\u003c\/li\u003e\n\u003cli\u003eSeries: A-Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTS-A300B 30cm enclosed slot-type port subwoofer\u003c\/h2\u003e\n\u003cp\u003eThis slot-port enclosed subwoofer and box package is designed to upgrade your car's standard sound system. The A-Series subwoofers are built to complement Pioneer's A-Series speakers, giving you a straightforward bass upgrade solution.\u003c\/p\u003e\n\u003cp\u003eA-Series subwoofers use carefully selected materials and IMPP™ cone technology to improve bass response without sacrificing sound quality.\u003c\/p\u003e\n\u003cp\u003ePaired with a Pioneer GM-A Series amplifier, the TS-A300B delivers solid, powerful bass at any volume level. If you'd prefer a self-contained solution, the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003ePioneer TS-WX300A\u003c\/a\u003e is a 12-inch powered subwoofer with a built-in amplifier.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713477632266,"sku":"91389","price":219.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-a300b-sub-12-enclosed-slot-port-bass-box-subwoofer-300w-rms-47166802460938.jpg?v=1748432659"},{"product_id":"pioneer-ts-wx1210ah-12-inch-powered-active-subwoofer-sub-bass-remote-500w-rms","title":"Pioneer TS-WX1210AH 12 Inch Powered Active Subwoofer Sub Bass Remote 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-WX1210AH is a 12-inch (30cm) powered bass reflex subwoofer with a built-in amplifier, rated at 500W RMS and 1500W maximum. It is part of Pioneer's active subwoofer range, designed as a single-enclosure bass upgrade with remote control and cables included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 500W RMS 12\" model. The Pioneer powered subwoofer range is also available as the \u003ca href=\"\/products\/pioneer-ts-wx1010la-powered-active-subwoofer-shallow-sub-bass-remote-300w-rms\"\u003ePioneer TS-WX1010LA 10\" 300W RMS shallow powered subwoofer\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 30cm (12\")\u003c\/li\u003e\n\u003cli\u003eType: single powered bass reflex subwoofer system (built-in amplifier)\u003c\/li\u003e\n\u003cli\u003ePower: 500W nominal, 1500W maximum\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20Hz to 2.9kHz\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50Hz to 200Hz (-12dB\/oct)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 114dB (in car, 2V)\u003c\/li\u003e\n\u003cli\u003eWeight: 12.3kg\u003c\/li\u003e\n\u003cli\u003eDimensions: 373 x 459 (375) x 400mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePowerful bass and easy to install\u003c\/h2\u003e\n\u003cp\u003eThe TS-WX1210AH is a single-driver subwoofer package delivering up to 1500W maximum power (500W nominal). Remote control and cables are included, making installation straightforward without needing a separate amplifier.\u003c\/p\u003e\n\u003cp\u003eThe cabinet and bass reflex port are optimised around the low-frequency characteristics of the single 30cm woofer, enabling faithful, powerful heavy bass reproduction.\u003c\/p\u003e\n\u003cp\u003eA built-in bass boost circuit lets you adjust sound pressure level and frequency characteristics to suit your music and taste.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713599103242,"sku":"91417","price":299.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-wx1210ah-12-inch-powered-active-subwoofer-sub-bass-remote-500w-rms-47167464243466.jpg?v=1748432868"},{"product_id":"pioneer-ts-a30s4-sub-12-30cm-a-series-component-car-subwoofer-4ohms-400w-rms","title":"Pioneer TS-A30S4 Sub 12\" 30cm A Series Component Car Subwoofer 4ohms 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-A30S4 is a 12\" (30cm) A-Series component car subwoofer with a single voice coil, 4 ohm impedance, and 400W RMS (1400W max) power handling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch \/ 30cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS \/ 1400W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 Ω single voice coil\u003c\/li\u003e\n\u003cli\u003eFrequency response: 22 Hz – 1.6 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87 dB\u003c\/li\u003e\n\u003cli\u003eMounting depth: 136 mm\u003c\/li\u003e\n\u003cli\u003eCut-out hole: 281 mm\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: 35.4 litres (1.25 ft³)\u003c\/li\u003e\n\u003cli\u003eXmax: 8.25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTS-A30S4 30 cm \/ 12\" A-Series Component Subwoofer, 1400 W MAX. 400 W NOM.\u003c\/h2\u003e\n\u003cp\u003eA 12\" subwoofer built on Pioneer's bass technology, delivering powerful, low-distortion sound at high volume.\u003c\/p\u003e\n\u003cp\u003eThe IMPP composite seamless cone is injection moulded for a rigid yet lightweight structure, giving punchy bass with minimal distortion. Wiring and installation are straightforward, and the subwoofer is designed for enclosed use. Its styling matches Pioneer's GM-A amplifier range and A-Series speakers. If you prefer a self-contained solution, Pioneer also offer the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003eTS-WX300A active powered 12\" subwoofer with built-in amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eCarSoundFit App\u003c\/h2\u003e\n\u003cp\u003eCompatible with Pioneer's CarSoundFit app, a car sound simulator that helps improve your in-car audio experience.\u003c\/p\u003e\n\n\u003ch2\u003eIMPP™\u003c\/h2\u003e\n\u003cp\u003eThe Injection Moulded Polypropylene cone delivers outstanding midbass response thanks to its ultra-rigid, lightweight construction.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713939595530,"sku":"91392","price":78.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-a30s4-sub-12-30cm-a-series-component-car-subwoofer-4ohms-400w-rms-47168077431050.jpg?v=1748432122"},{"product_id":"pioneer-ts-300d4-sub-12-30cm-champion-series-dual-voice-coil-subwoofer-400w-rms","title":"Pioneer TS-300D4 Sub 12\" 30cm Champion Series Dual Voice Coil Subwoofer 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-300D4 is a 12\" (30cm) Champion Series dual voice coil subwoofer rated at 400W RMS \/ 1400W max, designed for deep, accurate bass across a wide range of enclosure builds.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch \/ 30cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS \/ 1400W max\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm voice coils (4 Ω x 2)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 96 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 - 100 Hz\u003c\/li\u003e\n\u003cli\u003eMounting depth: 147 mm\u003c\/li\u003e\n\u003cli\u003eCut-out hole: 281 mm\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: 35.4 litres (1.25 ft³)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTS-300D4 Champion Series\u003c\/h2\u003e\n\u003cp\u003eA 12-inch sub built for deep, accurate bass at high volumes. The dual voice coil design gives flexible wiring options to suit a variety of amplifier configurations and enclosure builds.\u003c\/p\u003e\n\n\u003ch2\u003eUpgrade your sound with powerful bass\u003c\/h2\u003e\n\u003cp\u003e400W RMS power handling gives you headroom for loud, clean output. If you'd prefer a ready-to-go solution, Pioneer also offer the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003ePioneer TS-WX300A, a 12\" active subwoofer with built-in amplifier rated at 350W RMS\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eStrong sound\u003c\/h2\u003e\n\u003cp\u003eChampion Series subwoofers handle heavy loads at high volumes without losing sound quality. Compact dimensions make the TS-300D4 suitable for boot installs and custom enclosure builds alike.\u003c\/p\u003e\n\n\u003ch2\u003eIMPP membrane\u003c\/h2\u003e\n\u003cp\u003eThe IMPP cone adds rigidity and strength to the diaphragm, producing a tighter, more controlled bass response even at high power levels.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713940414730,"sku":"91381","price":69.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-300d4-sub-12-30cm-champion-series-dual-voice-coil-subwoofer-400w-rms-47168078807306.jpg?v=1748432112"},{"product_id":"kicker-l7tdf122-sub-12-inch-l7t-subwoofer-down-firing-loaded-enclosure-600w","title":"Kicker 49L7TDF122 Sub 12 Inch L7T Subwoofer Down Firing Loaded Enclosure 600w","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 49L7TDF122 is a slim, down-firing loaded enclosure housing a 12 inch L7T square subwoofer, rated at 600W RMS (1200W peak) at 2 ohms. It is part of Kicker's L7T series and is designed for vehicles where boot space is tight but bass performance matters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 49L7TDF122 L7T down-firing loaded enclosure. The Kicker down-firing 12\" loaded enclosure range is also available as the \u003ca href=\"\/products\/kicker-48trtp122-sub-12-inch-down-firing-subwoofer-loaded-enclosure-500w-rms\"\u003eKicker 48TRTP122 at 500W RMS\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 1 x 12 inch L7T square\u003c\/li\u003e\n\u003cli\u003eRMS power: 600W\u003c\/li\u003e\n\u003cli\u003ePeak power: 1200W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 86.1dB (1W\/1m)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25–100Hz\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, down-firing, MDF with internal bracing\u003c\/li\u003e\n\u003cli\u003eDimensions: 38.0 x 60.5 x 16.7cm (H x W x D)\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifier: no\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eL7T 12\" down-firing loaded enclosure, 2 ohm\u003c\/h2\u003e\n\u003cp\u003eThe Kicker 49L7TDF122 fits a 12\" square subwoofer into a slim, ready-to-fit enclosure — ideal where boot space is limited but bass quality is not negotiable.\u003c\/p\u003e\n\u003cp\u003eAt 600W RMS, the L7T delivers serious low-end output. Kicker's square sub design uses nearly 20% more cone area than a comparable round subwoofer, moving more air and producing louder bass without requiring a larger box.\u003c\/p\u003e\n\u003cp\u003eThe down-firing enclosure is built from thick MDF with internal bracing. It resists flex, stacked weight and surface scratches, so luggage can be loaded on top without risking damage to the driver below.\u003c\/p\u003e\n\u003cp\u003eForced-Air Cooling keeps the voice coil temperature in check. As the cone moves down, hot air is pushed out; as it moves up, cool air is drawn back in. This delivers consistent performance and long-term reliability at high power levels.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 inch L7T square subwoofer\u003c\/li\u003e\n\u003cli\u003e2 ohm impedance\u003c\/li\u003e\n\u003cli\u003e600W RMS power handling\u003c\/li\u003e\n\u003cli\u003eDown-firing design provides protection for the subwoofer driver\u003c\/li\u003e\n\u003cli\u003eThick MDF construction with strong internal bracing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45713947197706,"sku":"91083","price":399.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-49l7tdf122-sub-12-inch-l7t-subwoofer-down-firing-loaded-enclosure-600w-47168092111114.jpg?v=1748432105"},{"product_id":"focal-sub-12-performance-single-voice-coil-12-inch-4-ohm-car-subwoofer-300w-rms","title":"Focal Sub 12 Performance Single Voice Coil 12 Inch 4 Ohm Car Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal SUB 12 is a 12 inch (30 cm) single voice coil 4 ohm car subwoofer from Focal's Subwoofer Line, rated at 300W RMS (600W max). A polypropylene cone, ferrite magnet and steel chassis deliver deep, powerful bass in sealed or bass-reflex enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the single voice coil 4 ohm version. The SUB 12 is also available as the \u003ca href=\"\/products\/focal-sub-12-performance-dual-voice-coil-12-inch-2-ohm-car-subwoofer-300w-rms\"\u003eSUB 12 Dual Voice Coil\u003c\/a\u003e and the shallow \u003ca href=\"\/products\/focal-sub-12-performance-slim-compact-shallow-12-inch-car-subwoofer-230w-rms\"\u003eSUB 12 Slim\u003c\/a\u003e. The matching \u003ca href=\"\/products\/focal-sub-grill-for-12-inch-performance-subwoofer-sub-12-sub-12-dual-sub-12-slim\"\u003eFocal 12 inch subwoofer grill\u003c\/a\u003e fits all three.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch \/ 30 cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS, 600W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eSensitivity: 88 dB\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed box from 10L, bass-reflex box from 25L\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene with butyl surround\u003c\/li\u003e\n\u003cli\u003eMagnet: ferrite\u003c\/li\u003e\n\u003cli\u003eChassis: steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFocal SUB 12: single voice coil subwoofer, Subwoofer Line\u003c\/h2\u003e\n\u003cp\u003eDesigned and developed in France, the SUB 12 features a 12 inch (30 cm) polypropylene cone and single voice coil architecture for straightforward installation. It works in sealed or bass-reflex enclosures and is compatible with Focal's Auditor, Access, Universal, Polyglass and Slatefiber car audio systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeep, powerful bass reproduction\u003c\/li\u003e\n\u003cli\u003eWorks in sealed box from 10L or bass-reflex box from 25L\u003c\/li\u003e\n\u003cli\u003eRobust steel chassis\u003c\/li\u003e\n\u003cli\u003e300W RMS power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePolypropylene cone\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone provides high rigidity, resisting distortion at loud volumes — well suited to subwoofer use.\u003c\/p\u003e\n\u003ch2\u003eSimple connection\u003c\/h2\u003e\n\u003cp\u003eScrewable terminals make connecting the SUB 12 to an audio system straightforward and reliable.\u003c\/p\u003e\n\u003ch2\u003eBoosted bass\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone reproduces powerful low frequencies effectively. Adding the SUB 12 to an in-car system significantly improves dynamics and overall sound quality.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45714167628042,"sku":"90568","price":119.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub-12-performance-single-voice-coil-12-inch-4-ohm-car-subwoofer-300w-rms-47168481886474.jpg?v=1748431982"},{"product_id":"focal-sub-12-performance-dual-voice-coil-12-inch-2-ohm-car-subwoofer-300w-rms","title":"Focal Sub 12 Performance Dual Voice Coil 12 Inch 2 Ohm Car Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal Sub 12 Dual is a 12 inch (30 cm) dual voice coil car subwoofer from Focal's Subwoofer Line, rated at 300W RMS (600W max). Its 4 + 4 ohm voice coils can be wired in parallel for 2 ohm operation, letting your amplifier deliver maximum power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the dual voice coil version. The Focal Sub 12 is also available as the \u003ca href=\"\/products\/focal-sub-12-performance-single-voice-coil-12-inch-4-ohm-car-subwoofer-300w-rms\"\u003eSUB 12 single voice coil 4 ohm\u003c\/a\u003e and the shallow \u003ca href=\"\/products\/focal-sub-12-performance-slim-compact-shallow-12-inch-car-subwoofer-230w-rms\"\u003eSUB 12 Slim\u003c\/a\u003e. The matching \u003ca href=\"\/products\/focal-sub-grill-for-12-inch-performance-subwoofer-sub-12-sub-12-dual-sub-12-slim\"\u003eFocal 12 inch subwoofer grill\u003c\/a\u003e fits all three.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch \/ 30 cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS, 600W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 + 4 ohm dual voice coil (2 ohm in parallel)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 88 dB\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene with butyl surround\u003c\/li\u003e\n\u003cli\u003eChassis: steel\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed from 15 L, bass-reflex from 30 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFocal SUB 12 Dual: dual voice coil subwoofer, Subwoofer Line\u003c\/h2\u003e\n\u003cp\u003eDesigned and developed in France, the Sub 12 Dual features a 12 inch (30 cm) polypropylene cone for powerful bass in any in-car audio system. The dual voice coil design allows parallel wiring at 2 ohm, letting you make full use of your amplifier's output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeep, powerful bass\u003c\/li\u003e\n\u003cli\u003eWorks in sealed or bass-reflex enclosures\u003c\/li\u003e\n\u003cli\u003eSealed box from 15 L\u003c\/li\u003e\n\u003cli\u003eBass-reflex box from 30 L\u003c\/li\u003e\n\u003cli\u003eParallel voice coil connection for more SPL\u003c\/li\u003e\n\u003cli\u003eSteel chassis for robust construction\u003c\/li\u003e\n\u003cli\u003eExcellent power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePolypropylene cone\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone is rigid and resists distortion at high volumes — well suited to subwoofer use.\u003c\/p\u003e\n\n\u003ch2\u003eSimple connection\u003c\/h2\u003e\n\u003cp\u003eScrewable terminals make connecting the Sub 12 Dual to your audio system straightforward and secure.\u003c\/p\u003e\n\n\u003ch2\u003eBoosted bass\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone reproduces powerful low frequencies cleanly. Adding a subwoofer to an in-car system significantly improves overall sound quality, particularly dynamics.\u003c\/p\u003e\n\n\u003ch2\u003eTotal compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with all Focal Car Audio products, the Sub 12 Dual is particularly recommended to complement Auditor, Access, Universal, Polyglass and Slatefiber systems. It performs well in both sealed and bass-reflex enclosures.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45714168545546,"sku":"90567","price":149.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub-12-performance-dual-voice-coil-12-inch-2-ohm-car-subwoofer-300w-rms-47168483131658.jpg?v=1748431968"},{"product_id":"focal-sub-12-performance-slim-compact-shallow-12-inch-car-subwoofer-230w-rms","title":"Focal Sub 12 Performance Slim Compact Shallow 12 Inch Car Subwoofer 280w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal Sub 12 Slim is a shallow-mount 12 inch (30 cm) car subwoofer rated at 280W RMS (560W max), with a 4 ohm single voice coil. It belongs to Focal's Subwoofer Line and is designed for tight installation spaces such as boot sides.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the shallow-mount version. Standard-depth options are also available: the SUB 12 (single voice coil) and the SUB 12 Dual Voice Coil. The Focal 12 inch subwoofer grill fits all three variants.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch \/ 30 cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 280W RMS, 560W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87 dB\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene with butyl surround\u003c\/li\u003e\n\u003cli\u003eChassis: steel\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, from 15 L\u003c\/li\u003e\n\u003cli\u003eDesign: shallow depth for restricted spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFocal SUB 12 Slim: compact subwoofer, Subwoofer Line\u003c\/h2\u003e\n\u003cp\u003eDesigned and developed in France, the Sub 12 Slim uses a 12 inch (30 cm) polypropylene cone to deliver strong bass output. Its single voice coil architecture keeps installation straightforward, and its very shallow depth makes it well suited to restricted spaces such as the sides of a car boot.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShallow depth; easy to install in tight spaces\u003c\/li\u003e\n\u003cli\u003eDeep and powerful bass reproduction\u003c\/li\u003e\n\u003cli\u003eEffective in sealed enclosures from 15 L\u003c\/li\u003e\n\u003cli\u003eRobust steel chassis\u003c\/li\u003e\n\u003cli\u003e280W RMS power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePolypropylene cone\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone offers high rigidity, resisting distortion at loud volumes — a key advantage in a subwoofer application.\u003c\/p\u003e\n\n\u003ch2\u003eSimple connection\u003c\/h2\u003e\n\u003cp\u003eScrewable terminals make connecting the Sub 12 Slim to your audio system straightforward and secure.\u003c\/p\u003e\n\n\u003ch2\u003eBoosted bass\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone effectively reproduces powerful low frequencies. Adding a subwoofer to your in-car system significantly improves overall sound quality, particularly in dynamics and low-end response.\u003c\/p\u003e\n\n\u003ch2\u003eTotal compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with all Focal car audio products, the Sub 12 Slim is particularly recommended to complement Auditor, Access, Universal, Polyglass and Slatefiber systems. It works in sealed and bass-reflex enclosures; the slim design also suits compact sealed boxes. If you're building out a full Focal system, the \u003ca href=\"\/products\/focal-165-as3-access-series-3-way-6-5-car-door-component-speakers-80w-rms-pair\"\u003eFocal 165 AS3 Access Series 6.5 inch component speakers\u003c\/a\u003e pair well with a subwoofer upgrade.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45714169004298,"sku":"90569","price":149.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub-12-performance-slim-compact-shallow-12-inch-car-subwoofer-230w-rms-47168484016394.jpg?v=1748431976"},{"product_id":"alpine-r2-w12d4-sub-12-30cm-r-series-subwoofer-dual-4-ohm-voice-coils-750w-rms","title":"Alpine R2-W12D4 Sub 12\" 30cm R Series Subwoofer Dual 4 Ohm Voice Coils 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Alpine R2-W12D4 is a 12-inch (30 cm) second-generation R-Series car subwoofer with dual 4 ohm voice coils, rated at 750 W RMS and 2250 W peak. It is designed for bass-focused systems requiring high output and precise cone control from a single driver.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the dual 4 ohm version. The Alpine R2-W12 is also available in \u003ca href=\"\/products\/alpine-r2-w12d2-sub-12-30cm-r-series-subwoofer-dual-2-ohm-voice-coils-750w-rms\"\u003edual 2 ohm (R2-W12D2)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe dual voice coils can be wired with the supplied jumpers for flexible amplifier matching.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 in (30 cm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 750 W RMS \/ 2250 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 Ω (4 Ω + 4 Ω)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 24 Hz to 200 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1 W \/ 1 m): 84.5 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 65 mm\u003c\/li\u003e\n\u003cli\u003eXmax: 20 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 152 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 275 mm (10-7\/8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eR-Series: the next evolution of proven performance\u003c\/h2\u003e\n\u003cp\u003eThe 2022 2nd-Gen R-Series subwoofers build on decades of Alpine engineering to deliver deep, clean, accurate bass. Alpine's HAMR surround maximises cone excursion and bass output, while a lightweight, rigid ceramic dust cap keeps distortion low. The enlarged motor structure improves overall woofer control for a strong, clean bass response.\u003c\/p\u003e\n\n\u003ch2\u003eNew motor structure\u003c\/h2\u003e\n\u003cp\u003eLarger, double-stacked magnets generate more motor force for deeper bass and tighter cone control than the previous generation. An integrated Faraday ring minimises distortion, and a Kevlar-treated cone ensures durability at high volumes.\u003c\/p\u003e\n\n\u003ch2\u003eNext-gen sound performance\u003c\/h2\u003e\n\u003cp\u003eBuilding on the reputation of the original Type R platform, the 2nd-Gen R-Series delivers even greater bass output and reliable performance. Pair it with a compatible amplifier and use the \u003ca href=\"\/products\/alpine-rux-knob2-remote-bass-subwoofer-level-control-for-x-r-s-v-pdx-series-amps\"\u003eAlpine RUX-KNOB2 remote bass level control\u003c\/a\u003e for convenient adjustment from the driver's seat.\u003c\/p\u003e\n\n\u003ch2\u003eAdditional reliability\u003c\/h2\u003e\n\u003cp\u003eA polypropylene\/ceramic composite dust cap provides rigidity and internal damping to smooth the bass response and reproduce tight bass. The material also offers higher heat resistance for sustained, non-stop bass performance.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible application\u003c\/h2\u003e\n\u003cp\u003eThe dual voice coil (DVC) design includes easy-configuration \"EZ-Change\" jumpers for flexible wiring options. The twist-lock grille mounting system allows an optional grille to be fitted or removed without mounting screws, offering additional cone protection.\u003c\/p\u003e\n\n\u003ch2\u003eIncreased accuracy\u003c\/h2\u003e\n\u003cp\u003eAlpine's High Amplitude Multi-Roll (HAMR) rubber surround lets the cone move air efficiently while staying cool, allowing 20 mm of total cone excursion for accurate, controlled bass reproduction.\u003c\/p\u003e","brand":"Alpine","offers":[{"title":"Default Title","offer_id":45714217369866,"sku":"90044","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/alpine-subwoofer-alpine-r2-w12d4-sub-12-30cm-r-series-subwoofer-dual-4-ohm-voice-coils-750w-rms-47168574226698.jpg?v=1748430300"},{"product_id":"alpine-r2-w12d2-sub-12-30cm-r-series-subwoofer-dual-2-ohm-voice-coils-750w-rms","title":"Alpine R2-W12D2 Sub 12\" 30cm R Series Subwoofer Dual 2 Ohm Voice Coils 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Alpine R2-W12D2 is a 12-inch (30cm) second-generation R-Series subwoofer with dual 2-ohm voice coils, rated at 750 W RMS and 2,250 W peak. It is a passive sub driver from Alpine's 2nd-Gen R-Series range, built for car audio enthusiasts who want deep, accurate, high-output bass.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12-inch (30cm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 750 W RMS, 2,250 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual voice coil, 2 ohm + 2 ohm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 24 Hz to 200 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1W\/1m): 84.5 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: 65 mm\u003c\/li\u003e\n\u003cli\u003eX-Max: 20 mm\u003c\/li\u003e\n\u003cli\u003eCut-out diameter: 275 mm (10-7\/8 in)\u003c\/li\u003e\n\u003cli\u003eTerminals: push-type, up to 8AWG wire; CTA-2031 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThe 2nd-Gen R-Series subwoofers\u003c\/h2\u003e\n\u003cp\u003eThe 2nd-Gen R-Series subwoofers draw from decades of Alpine engineering experience. They deliver deep, clean, accurate bass, and feature Alpine's HAMR Surround for maximum cone excursion. A new ceramic dust cap keeps distortion to a minimum, while an enlarged motor structure improves woofer control for a clean, strong bass response.\u003c\/p\u003e\n\n\u003ch2\u003eNew motor structure\u003c\/h2\u003e\n\u003cp\u003eLarger, double-stacked magnets provide more motor force for deeper, tighter bass compared to the previous generation. An integrated Faraday ring minimises distortion for cleaner output, and a Kevlar-treated cone ensures durability and reliable performance even at high volumes.\u003c\/p\u003e\n\n\u003ch2\u003eNext-gen sound performance\u003c\/h2\u003e\n\u003cp\u003eBuilding on the legacy of the Type R platform, Alpine's R-Series has long been recognised for output and reliability. The 2nd-Gen R-Series pushes that further with even greater bass output. To get the most from this subwoofer, Alpine's \u003ca href=\"\/products\/alpine-rux-knob2-remote-bass-subwoofer-level-control-for-x-r-s-v-pdx-series-amps\"\u003eRUX-KNOB2 remote bass level control\u003c\/a\u003e is compatible with R-Series amplifiers and makes fine-tuning your bass level straightforward from the driver's seat.\u003c\/p\u003e\n\n\u003ch2\u003eAdditional reliability\u003c\/h2\u003e\n\u003cp\u003eA polypropylene\/ceramic composite dust cap provides rigidity and internal damping to smooth bass response and reproduce tight bass. The material also offers higher heat reliability for sustained, non-stop bass performance.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible application\u003c\/h2\u003e\n\u003cp\u003eThe R2-W12D2 features a dual voice coil (DVC) with easy-configuration jumpers for flexible wiring options. A new \"EZ-Change\" twist-lock grille mounting system allows an optional grille to be fitted or removed without mounting screws, giving added cone protection.\u003c\/p\u003e\n\n\u003ch2\u003eIncreased accuracy\u003c\/h2\u003e\n\u003cp\u003eAlpine's High Amplitude Multi-Roll (HAMR) Surround technology allows the cone to move air efficiently while staying cool. It delivers 20 mm of total cone excursion for accurate, controlled bass output.\u003c\/p\u003e","brand":"Alpine","offers":[{"title":"Default Title","offer_id":45714217795850,"sku":"90043","price":209.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/alpine-subwoofer-alpine-r2-w12d2-sub-12-30cm-r-series-subwoofer-dual-2-ohm-voice-coils-750w-rms-47168575602954.jpg?v=1748430292"},{"product_id":"vibe-subwoofer-12-inch-powerful-car-bass-sub-500w-rms-dual-2-ohms-slick12d2-v3","title":"Vibe Subwoofer 12 Inch Powerful Car Bass Sub 500w RMS Dual 2 ohms SLICK12D2-V3","description":"\u003cp\u003e\u003cstrong\u003eThe Vibe SLICK12D2-V3 is a 12-inch dual 2-ohm car subwoofer from the Vibe Slick range, rated at 500W RMS and 1500W peak, featuring a 2-inch OFC 4-layer voice coil, composite paper cone and wide roll butyl foam surround on Vibe's Torsion basket.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 12-inch model. The Vibe Slick series is also available as the \u003ca href=\"\/products\/vibe-subwoofer-8-inch-powerful-car-bass-sub-450w-rms-dual-2-ohms-slick8d2-v3\"\u003e8-inch SLICK8D2-V3\u003c\/a\u003e and the \u003ca href=\"\/products\/vibe-subwoofer-10-inch-powerful-car-bass-sub-500w-rms-dual-2-ohms-slick10d2-v0\"\u003e10-inch SLICK10D2-V3\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch\u003c\/li\u003e\n\u003cli\u003ePower: 500W RMS, 1500W peak, 3000W SPL (burp)\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 2 ohms\u003c\/li\u003e\n\u003cli\u003eVoice coil: 2 inch (50mm) OFC, 4-layer, high temperature\u003c\/li\u003e\n\u003cli\u003eCone: composite paper with PP dome dust cap\u003c\/li\u003e\n\u003cli\u003eSurround: wide roll butyl foam\u003c\/li\u003e\n\u003cli\u003eMotor: FEMM designed, bumped backplate\u003c\/li\u003e\n\u003cli\u003eTerminals: spring loaded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSLICK12D2-V3 12-inch 1500W max subwoofer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: SLICK12D2\u003c\/li\u003e\n\u003cli\u003e500W RMS\u003c\/li\u003e\n\u003cli\u003e1500W max\u003c\/li\u003e\n\u003cli\u003eDual 2 ohms\u003c\/li\u003e\n\u003cli\u003eWide roll foam surround\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe SLICK12D2-V3 features the largest magnet assembly and highest motor force ever used on a Vibe entry-level subwoofer. Mounted on Vibe's Torsion basket, the large spider assembly delivers more excursion than any previous Slick model.\u003c\/p\u003e\n\n\u003cp\u003eThe high-temperature 2-inch (50mm) 4-layer dual 2-ohm voice coil provides a significant power handling increase over earlier versions. A semi-pressed composite FEA cone paired with the wide roll stitched foam surround produces powerful low-frequency response with strong fidelity.\u003c\/p\u003e\n\n\u003ch2\u003ePowerful, precise, versatile\u003c\/h2\u003e\n\n\u003cp\u003eThe largest magnet structure Vibe has produced in this range, combined with a precision-engineered voice coil, spider pack and cone, delivers deep and precise bass. The redesigned dust cap adds cone strength and a distinctive two-tone floating appearance.\u003c\/p\u003e\n\n\u003cp\u003eThe wide roll foam surround allows high excursion for accurate reproduction of the lowest frequencies, making this the most capable Slick subwoofer Vibe has built.\u003c\/p\u003e","brand":"Vibe","offers":[{"title":"Default Title","offer_id":45714233196810,"sku":"91679","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/vibe-subwoofer-vibe-subwoofer-12-inch-powerful-car-bass-sub-500w-rms-dual-2-ohms-slick12d2-v3-47168604078346.jpg?v=1748430244"},{"product_id":"edge-spl-sub-12-inch-subwoofer-dual-2-ohm-voice-coil-1500w-rms-edp122spl-e3","title":"Edge SPL Sub 12 Inch Subwoofer Dual 2 Ohm Voice Coil 1500w RMS EDP122SPL-E3","description":"\u003cp\u003e\u003cstrong\u003eThe Edge EDP122SPL-E3 is a 12-inch SPL car subwoofer with dual 2 Ohm voice coils, rated at 1500W RMS (3000W peak), from Edge's SPL sub range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch\u003c\/li\u003e\n\u003cli\u003eRMS power: 1500W\u003c\/li\u003e\n\u003cli\u003ePeak power: 3000W\u003c\/li\u003e\n\u003cli\u003eImpedance: Dual 2 Ohm\u003c\/li\u003e\n\u003cli\u003eVoice coil: 45mm copper winding\u003c\/li\u003e\n\u003cli\u003eCone: Non-pressed paper\u003c\/li\u003e\n\u003cli\u003eSurround: Stitched wide roll foam\u003c\/li\u003e\n\u003cli\u003eMagnets: Dual Y35 ferrite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eEDP122SPL-E3\u003c\/h2\u003e\n\u003cp\u003eBuilt for high-output SPL use, the EDP122SPL-E3 handles 1500W RMS and is designed for setups where volume and bass pressure are the priority.\u003c\/p\u003e\n\n\u003ch2\u003e12 Inch SPL Subwoofer 1500W RMS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNon-pressed paper cone\u003c\/li\u003e\n\u003cli\u003eWide roll foam surround\u003c\/li\u003e\n\u003cli\u003eBlack polycotton spiders\u003c\/li\u003e\n\u003cli\u003eDual Y35 ferrite magnets\u003c\/li\u003e\n\u003cli\u003e45mm copper voice coil winding\u003c\/li\u003e\n\u003cli\u003eDual 2 Ohm voice coil configuration\u003c\/li\u003e\n\u003cli\u003e1500W RMS \/ 3000W peak power handling\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Edge","offers":[{"title":"Default Title","offer_id":45714233393418,"sku":"90436","price":179.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/EDP122SP.jpg?v=1759147373"},{"product_id":"hertz-mille-pro-mpbx-300-s2-sub-12-shallow-subwoofer-enclosure-2-ohm-500w-rms","title":"Hertz Mille Pro MPBX 300 S2 Sub 12\" Shallow Subwoofer Enclosure 2 Ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MPBX 300 S2 is an ultra-shallow 12-inch (300mm) sealed subwoofer enclosure, loaded with the MPS 300 S2 driver and rated at 500W RMS \/ 1000W peak at 2 ohms. It is part of the Hertz Mille Pro range, designed for installations where boot or cabin depth is restricted.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: Hertz MPS 300 S2, 300mm (12in), single voice coil\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W continuous, 1000W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25Hz to 400Hz\u003c\/li\u003e\n\u003cli\u003eEnclosure: ultra-shallow sealed, 15mm wood, down- or up-firing (2S²)\u003c\/li\u003e\n\u003cli\u003eDepth: 118mm (4.65in)\u003c\/li\u003e\n\u003cli\u003eConnection: SSP plug-and-play terminal block plus push terminals\u003c\/li\u003e\n\u003cli\u003eWeight: 10.8kg\u003c\/li\u003e\n\u003cli\u003eAward: EISA Award Best Product 2022–2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMPBX 300 S2 2-ohm sealed enclosure\u003c\/h2\u003e\n\n\u003cp\u003eThe enclosure is built from 15mm (0.59in) wood with panel-to-panel internal bracing, solid corners and internal sound-absorbing material to minimise resonances and virtually increase internal volume. Round corners make placement easier.\u003c\/p\u003e\n\n\u003cp\u003eThe 2S² (2 Sides\/2 Sounds) design lets you choose between down-firing mounting — using the supplied feet with hook-and-loop inserts for extended low-frequency reach — or up-firing installation for more punch and definition. The SSP (Sub Smart Plug) connection system combines a plug-and-play terminal block with traditional push terminals for a secure, quick-release connection.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eUltra-shallow sealed enclosure specifically optimised for the MPS 300 S2 driver.\u003c\/li\u003e\n\u003cli\u003e15mm (0.59in) wood thickness for a robust structure.\u003c\/li\u003e\n\u003cli\u003ePanel-to-panel internal bracing with solid corners to minimise resonances.\u003c\/li\u003e\n\u003cli\u003eRound corners to ease placement.\u003c\/li\u003e\n\u003cli\u003eInternal sound-absorbing material reduces acoustic resonances and virtually increases box volume.\u003c\/li\u003e\n\u003cli\u003e2S² design: down-firing (supplied feet with hook-and-loop inserts) or up-firing installation.\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug): plug-and-play terminal block plus traditional push terminals for bulletproof, quick-release connection.\u003c\/li\u003e\n\u003cli\u003eScrewless mesh grille included with adjustable logo position, suitable for reverse install.\u003c\/li\u003e\n\u003cli\u003eEID: Scan, Discover, Identify.\u003c\/li\u003e\n\u003cli\u003eMPS 300 S2 driver: ultra-shallow structure compatible with minimum-depth enclosures.\u003c\/li\u003e\n\u003cli\u003e500W continuous power handling at 2 ohms.\u003c\/li\u003e\n\u003cli\u003eAir Intercooling Revolution (A.I.R.) prevents air-compression-related limitations.\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium frame.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45714282479882,"sku":"90843","price":599.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mpbx-300-s2-sub-12-shallow-subwoofer-enclosure-2-ohm-500w-rms-47168697729290.jpg?v=1748430127"},{"product_id":"kicker-48trtp122-sub-12-inch-down-firing-subwoofer-loaded-enclosure-500w-rms","title":"Kicker 48TRTP122 Sub 12 Inch Down Firing Subwoofer Loaded Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 48TRTP122 is a 12\" down-firing loaded subwoofer enclosure rated at 500W RMS (1000W peak) at 2 ohms, pairing a CompRT active driver with a passive reFLEX radiator in a low-profile braced MDF box. It is part of Kicker's TRTP range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 12\" (30 cm) CompRT with passive reFLEX radiator\u003c\/li\u003e\n\u003cli\u003eEnclosure: Down-firing loaded enclosure, braced MDF\u003c\/li\u003e\n\u003cli\u003eRMS power: 500W\u003c\/li\u003e\n\u003cli\u003ePeak power: 1000W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm (single terminal)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 98 dB 1W\/1m\u003c\/li\u003e\n\u003cli\u003eInstalled height: 15.6 cm (6 1\/8\")\u003c\/li\u003e\n\u003cli\u003eBox size: 37.0 cm wide x 70.0 cm long\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKicker TRTP CompRT 12\" down-firing loaded enclosure, 2 ohm (48TRTP122)\u003c\/h2\u003e\n\u003cp\u003eThe TRTP down-firing loaded enclosure fits under a pickup seat or in the boot, delivering strong bass without sacrificing cargo space. It comes loaded with a passive reFLEX subwoofer and a CompRT active sub for extremely low bass extension.\u003c\/p\u003e\n\u003cp\u003eThe enclosures for the reFLEX and CompRT sub are pre-wired to a single 2 ohm terminal. The box is built to take the weight of stacked cargo, with extensive internal bracing and thick MDF construction throughout.\u003c\/p\u003e\n\u003cp\u003eThe CompRT features red double stitching bonding an improved Santoprene surround to a polypropylene woofer cone. SoloKon technology joins the cone to the vented back brace, forming a single integrated unit that cools the motor and reduces distortion. Kicker's Forced-Air Cooling keeps the drivers running approximately 20 percent cooler.\u003c\/p\u003e\n\u003cp\u003eThe 48TRTP122 works best with 500W of recommended amplifier power. If you prefer an all-in-one solution, the \u003ca href=\"\/products\/kicker-ptrtp12-powered-down-firing-12-sub-active-subwoofer-enclosure-500w-rms\"\u003eKicker 51PTRTP12 adds a built-in 500W amplifier\u003c\/a\u003e to the same down-firing 12\" format. For more output, Kicker also offer the \u003ca href=\"\/products\/kicker-l7tdf122-sub-12-inch-l7t-subwoofer-down-firing-loaded-enclosure-600w\"\u003e49L7TDF122 L7T 12\" down-firing enclosure rated at 600W\u003c\/a\u003e.\u003c\/p\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45714294341898,"sku":"91080","price":339.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-48trtp122-sub-12-inch-down-firing-subwoofer-loaded-enclosure-500w-rms-47168724861194.jpg?v=1748430107"},{"product_id":"kicker-48tcwrt122-sub-12-inch-thin-profile-subwoofer-loaded-enclosure-500w-rms","title":"Kicker 48TCWRT122 Sub 12 Inch Thin Profile Subwoofer Loaded Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 48TCWRT122 is a 12 inch CompRT thin-profile loaded enclosure, rated at 500W RMS into a single 2 ohm terminal. It pairs a CompRT active subwoofer with a reFLEX passive radiator and belongs to Kicker's CompRT loaded enclosure range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 12 inch. The CompRT thin-profile loaded enclosure is also available in \u003ca href=\"\/products\/kicker-48tcwrt672-sub-6-75-inch-thin-profile-subwoofer-loaded-enclosure-150w-rms\"\u003e6.75 inch\u003c\/a\u003e, \u003ca href=\"\/products\/kicker-48tcwrt82-sub-8-inch-thin-profile-subwoofer-loaded-enclosure-300w-rms\"\u003e8 inch\u003c\/a\u003e and \u003ca href=\"\/products\/kicker-48tcwrt102-sub-10-inch-thin-profile-subwoofer-loaded-enclosure-400w-rms\"\u003e10 inch\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 12\" (30 cm) CompRT active sub plus reFLEX passive radiator\u003c\/li\u003e\n\u003cli\u003eImpedance: single 2 ohm terminal\u003c\/li\u003e\n\u003cli\u003eRecommended power: 500W RMS\u003c\/li\u003e\n\u003cli\u003ePeak power: 1000W\u003c\/li\u003e\n\u003cli\u003eSensitivity: 98 dB 1W\/1m\u003c\/li\u003e\n\u003cli\u003eDimensions: 68.5 cm W x 34.3 cm H x 8.9 cm top depth \/ 17.7 cm bottom depth\u003c\/li\u003e\n\u003cli\u003eConstruction: thick MDF, internal bracing, carpet finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompRT 12\" thin-profile loaded enclosure — 2 ohm\u003c\/h2\u003e\n\n\u003cp\u003eThe CompRT loaded enclosure delivers deep bass in a compact footprint. It fits under a seat, behind a rear bench or in a cargo area, and comes carpeted with a single 2 ohm terminal ready to connect.\u003c\/p\u003e\n\n\u003cp\u003eThe enclosure features extensive internal bracing and thick MDF construction. The CompRT sub uses red double stitching to bond an improved Santoprene surround to a polypropylene cone. SoloKon™ technology joins the cone to a vented back brace, forming a single integrated unit that cools the motor and reduces distortion.\u003c\/p\u003e\n\n\u003cp\u003eForced-Air Cooling™ helps the sub run 20 per cent cooler for improved long-term reliability. The reFLEX™ passive radiator works alongside the CompRT active sub to extend low-frequency output. Recommended amplifier power is 500W RMS.\u003c\/p\u003e\n\n\u003cp\u003eIf you need a powered solution, the \u003ca href=\"\/products\/kicker-48trtp122-sub-12-inch-down-firing-subwoofer-loaded-enclosure-500w-rms\"\u003eKicker 48TRTP122 12 inch down-firing loaded enclosure\u003c\/a\u003e is a related alternative worth considering.\u003c\/p\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45714297422090,"sku":"91076","price":339.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-48tcwrt122-sub-12-inch-thin-profile-subwoofer-loaded-enclosure-500w-rms-47168730202378.jpg?v=1748430104"},{"product_id":"kicker-tl7t122-sub-12-inch-l7t-subwoofer-thin-profile-loaded-enclosure-600w","title":"Kicker 46TL7T122 Sub 12 Inch L7T Subwoofer Thin Profile Loaded Enclosure 600w","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 46TL7T122 is a thin-profile loaded enclosure housing a Solo-Baric L7T 12-inch square subwoofer, rated at 600W RMS into a 2-ohm load. At just under eight inches deep at its deepest point, it fits under or behind seats in trucks, saloons and hatchbacks. It is part of Kicker's L7T shallow subwoofer range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the standard forward-firing 46TL7T122. The L7T 12\" loaded enclosure is also available in a \u003ca href=\"\/products\/kicker-l7tdf122-sub-12-inch-l7t-subwoofer-down-firing-loaded-enclosure-600w\"\u003edown-firing configuration (49L7TDF122)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003ePrefer to build your own box? The bare \u003ca href=\"\/products\/kicker-ka46l7t122-l7t-12-shallow-dual-2-ohm-subwoofer-600w\"\u003e46L7T122 L7T subwoofer\u003c\/a\u003e is also available. Other sizes: \u003ca href=\"\/products\/kicker-tl7t82-sub-8-inch-l7t-subwoofer-this-profile-loaded-enclosure-350w-rms\"\u003e46TL7T82\u003c\/a\u003e, \u003ca href=\"\/products\/kicker-46tl7t102-sub-10-inch-l7t-subwoofer-thin-profile-loaded-enclosure-500w\"\u003e46TL7T102\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: Solo-Baric L7T 12\" square, included\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003ePower handling: 600W RMS\u003c\/li\u003e\n\u003cli\u003eSensitivity: 86.54 dB 1W\/1m\u003c\/li\u003e\n\u003cli\u003eDepth: 4-3\/8\" (11.2 cm) top, 7-3\/4\" (19.6 cm) bottom\u003c\/li\u003e\n\u003cli\u003eHeight x width: 35 x 54.6 cm\u003c\/li\u003e\n\u003cli\u003eConstruction: thick MDF, black carpet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTL7T 12\" Thin Profile Loaded Enclosure — 2 Ohm\u003c\/h2\u003e\n\n\u003ch2\u003e46TL7T122\u003c\/h2\u003e\n\n\u003cp\u003eAt barely seven inches deep at its shallowest point, the TL7T 12-inch enclosure delivers big bass under or behind your seats. It works equally well mounted in a truck, saloon or hatchback, combining a compact footprint with 600W recommended power handling.\u003c\/p\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45714302501130,"sku":"91073","price":359.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-46tl7t122-sub-12-inch-l7t-subwoofer-thin-profile-loaded-enclosure-600w-47168742981898.jpg?v=1748431910"},{"product_id":"kicker-44vl7s122-sub-12-inch-l7s-subwoofer-solo-baric-loaded-enclosure-750w-rms","title":"Kicker 44VL7S122 Sub 12 Inch L7S Subwoofer Solo Baric Loaded Enclosure 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 44VL7S122 is a vented loaded enclosure housing a Solo-Baric L7S 12-inch square subwoofer, rated at 750W RMS into a single 2 ohm connection. It is part of Kicker's Solo-Baric L7S range and arrives ready to install — no custom box required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: Solo-Baric L7S 12\" (30 cm), included\u003c\/li\u003e\n\u003cli\u003eEnclosure type: vented, custom engineered port\u003c\/li\u003e\n\u003cli\u003eImpedance: single 2 ohm terminal\u003c\/li\u003e\n\u003cli\u003ePower handling: 750W RMS, 1500W peak\u003c\/li\u003e\n\u003cli\u003eSensitivity: 86.9 dB 1W\/1m\u003c\/li\u003e\n\u003cli\u003eDimensions: 47.6 cm W x 40.6 cm H x 37.4 cm top depth \/ 45.5 cm bottom depth\u003c\/li\u003e\n\u003cli\u003eConstruction: thick MDF, heavy internal bracing, black carpet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSolo-Baric L7S 12\" vented loaded enclosure — 2 ohm\u003c\/h2\u003e\n\u003cp\u003eThe 44VL7S122 enclosure delivers big, legendary bass straight out of the box. It features a custom-designed vent and terminal cup, extra-thick front baffle and fortified back bracing for a solid, rattle-free build. The included Solo-Baric L7S 12-inch subwoofer runs on a single 2 ohm connection and works best with the recommended 750W of amplifier power. If you'd prefer a down-firing alternative, the \u003ca href=\"\/products\/kicker-l7tdf122-sub-12-inch-l7t-subwoofer-down-firing-loaded-enclosure-600w\"\u003eKicker 49L7TDF122 L7T 12-inch down-firing enclosure\u003c\/a\u003e is worth considering.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Solo-Baric L7S subwoofer included\u003c\/li\u003e\n\u003cli\u003eCustom engineered port design\u003c\/li\u003e\n\u003cli\u003eHeavy internal bracing\u003c\/li\u003e\n\u003cli\u003eSingle 2 ohm terminal\u003c\/li\u003e\n\u003cli\u003eEasy to install and wire\u003c\/li\u003e\n\u003cli\u003eThick MDF construction\u003c\/li\u003e\n\u003cli\u003eThick black carpet finish\u003c\/li\u003e\n\u003cli\u003eRounded corners\u003c\/li\u003e\n\u003cli\u003eEmbroidered Kicker logo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45714305253642,"sku":"91070","price":449.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-44vl7s122-sub-12-inch-l7s-subwoofer-solo-baric-loaded-enclosure-750w-rms-47168749601034.jpg?v=1748431923"},{"product_id":"kicker-ptrtp12-powered-down-firing-12-sub-active-subwoofer-enclosure-500w-rms","title":"Kicker 51PTRTP12 Powered Down Firing 12\" Sub Active Subwoofer Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 51PTRTP12 is a powered, down-firing 12-inch subwoofer enclosure with a built-in 500 W RMS amplifier, pairing an active CompRT subwoofer with a passive reFLEX sub. Part of Kicker's PTRTP range, it is designed for drivers who want strong bass from a compact, factory-tuned enclosure that integrates with an existing factory system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the powered 51PTRTP12. The down-firing 12\" loaded enclosure range is also available as the \u003ca href=\"\/products\/kicker-48trtp122-sub-12-inch-down-firing-subwoofer-loaded-enclosure-500w-rms\"\u003eKicker 48TRTP122 500 W RMS passive loaded enclosure\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Powered down-firing enclosure\u003c\/li\u003e\n\u003cli\u003eWoofer size: 12\" (30 cm) active CompRT plus passive reFLEX\u003c\/li\u003e\n\u003cli\u003eRMS power: 500 W at 14.4 V\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 Hz – 120 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover: Variable low-pass 50–120 Hz (12 dB\/oct), high-pass at 25 Hz\u003c\/li\u003e\n\u003cli\u003eBass boost: KickEQ variable to +6 dB, centred at 40 Hz\u003c\/li\u003e\n\u003cli\u003eInputs: Low level 125 mV – 5 V, high level 1 V – 40 V\u003c\/li\u003e\n\u003cli\u003eBox size: 16.6 cm (H) x 37 cm (D) x 70 cm (W)\u003c\/li\u003e\n\u003cli\u003eRemote bass control included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e51PTRTP12 powered down-firing 12\" enclosure\u003c\/h2\u003e\n\n\u003ch3\u003eHard-hitting bass in a single package\u003c\/h3\u003e\n\u003cp\u003eThe PTRTP combines an active CompRT subwoofer, a passive reFLEX sub, and a power-matched built-in amplifier into one efficient bass solution. Everything is factory-tuned and ready to fit into tight spaces in many trucks and SUVs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact, factory-tuned enclosure suits tight locations in many trucks and SUVs\u003c\/li\u003e\n\u003cli\u003e12-inch sub paired with a built-in 500 W power-matched amplifier\u003c\/li\u003e\n\u003cli\u003eEasily integrates with a factory system\u003c\/li\u003e\n\u003cli\u003eDown-firing design for ultimate driver protection\u003c\/li\u003e\n\u003cli\u003eThick, tough internal bracing to resist stacking weight\u003c\/li\u003e\n\u003cli\u003eActive CompRT sub matched with passive reFLEX sub for extra output\u003c\/li\u003e\n\u003cli\u003eRemote bass control included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45714390745354,"sku":"91086","price":499.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-51ptrtp12-powered-down-firing-12-sub-active-subwoofer-enclosure-500w-rms-47168914850058.jpg?v=1748431376"},{"product_id":"hertz-mille-pro-mps-300-s4-sub-12-inch-30cm-shallow-car-subwoofer-4-ohm-500w-rms","title":"Hertz Mille Pro MPS 300 S4 Sub 12 Inch 30cm Shallow Car Subwoofer 4 Ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MPS 300 S4 is a 12 inch (300 mm) shallow car subwoofer from Hertz's Mille Pro range, rated at 500W RMS (1000W peak) with a single 4 ohm voice coil and a mounting depth of just 88 mm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 4 ohm (S4) version. The MPS 300 is also available in \u003ca href=\"\/products\/hertz-mille-pro-mps-300-s2-sub-12-inch-30cm-shallow-car-subwoofer-2-ohm-500w-rms\"\u003e2 ohm (S2)\u003c\/a\u003e. A robust screw-less mesh grille is included.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 12 inch (300 mm) shallow subwoofer\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS, 1000W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eMounting depth: 88 mm (3.46 in)\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, from 22.7 L (0.8 cu ft)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 – 400 Hz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 38 mm six-layer copper\u003c\/li\u003e\n\u003cli\u003eXmech: 20 mm\u003c\/li\u003e\n\u003cli\u003eFrame: die-cast aluminium, grille included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExtreme dynamics, unlimited power handling, realistic sound stage\u003c\/h2\u003e\n\u003cp\u003eMille Pro Shallow Subwoofer key features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-shallow overall depth of 88 mm\u003c\/li\u003e\n\u003cli\u003e500W continuous power handling\u003c\/li\u003e\n\u003cli\u003eOptimised for extremely compact sealed enclosures from 22.7 L (0.8 cu ft)\u003c\/li\u003e\n\u003cli\u003eAir Intercooling Revolution (A.I.R.) prevents air-compression-related limitations\u003c\/li\u003e\n\u003cli\u003eHigh mechanical excursion (Xmech 20 mm)\u003c\/li\u003e\n\u003cli\u003eSix-layer copper voice coil (38 mm \/ 1.5 in) for high thermal capacity\u003c\/li\u003e\n\u003cli\u003eNon-vented rear design allows reduced enclosure depth\u003c\/li\u003e\n\u003cli\u003eRobust screw-less mesh grille included with black screws provided\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium frame\u003c\/li\u003e\n\u003cli\u003eSolid horizontal 8AWG spring-loaded terminals\u003c\/li\u003e\n\u003cli\u003eEID: Scan, Discover, Identify\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe MPS 300 S4 is designed for installs where space is severely limited — a typical example being a subwoofer enclosure fitted under the rear bench of a pick-up truck, where both space and height are restricted.\u003c\/p\u003e\n\u003cp\u003eDespite its shallow profile, the MPS 300 S4 combines low mounting depth with high cone excursion (Xmech 20 mm). This is achieved through a dedicated support structure for the spider and coil that moves the magnetic group inwards, reducing depth whilst maximising linear cone excursion.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45714495602954,"sku":"90854","price":449.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mps-300-s4-sub-12-inch-30cm-shallow-car-subwoofer-4-ohm-500w-rms-47169107132682.jpg?v=1748431234"}],"url":"https:\/\/www.cen.uk\/collections\/12-inch-subwoofers.oembed?page=2","provider":"CEN","version":"1.0","type":"link"}