{"title":"10 Inch Subwoofers","description":"\u003cp\u003e\u003cstrong\u003e10 inch subwoofers are the all-rounder: deeper than an 8 inch, and small enough for most hatchbacks and saloons.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a raw driver for a custom box, a ready-loaded enclosure, or an \u003ca href=\"\/collections\/active-subwoofers\"\u003eactive subwoofer\u003c\/a\u003e with the amplifier built in. Pair a driver with a \u003ca href=\"\/collections\/1-channel-amplifiers\"\u003emono amplifier\u003c\/a\u003e, browse all \u003ca href=\"\/collections\/subwoofers\"\u003ecar subwoofers\u003c\/a\u003e, or have your sub fitted at our Nottingham workshop.\u003c\/p\u003e","products":[{"product_id":"audison-prima-apbx-10-ds-10-passive-sub-box-compact-subwoofer-enclosure-400w","title":"Audison Prima APBX 10 DS 10\" Passive Sub Box Compact Subwoofer Enclosure 400w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APBX 10 DS is a 10\" passive sealed subwoofer enclosure from the Audison Prima range, housing a dual 4 Ohm driver rated at 400W continuous (800W peak) in an ultra-low-profile 142 mm tall box designed for boot installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the passive APBX 10 DS. The enclosure is also available as the \u003ca href=\"\/products\/audison-prima-apbx-10-as2-10-active-subwoofer-enclosure-compact-sub-box-400w\"\u003eAudison Prima APBX 10 AS2 active subwoofer enclosure\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 10\" (250 mm) APS 10 D, water-repellent pressed paper cone\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W continuous \/ 800W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 + 4 Ohm\u003c\/li\u003e\n\u003cli\u003eEnclosure: 12-litre sealed\u003c\/li\u003e\n\u003cli\u003eHeight: 142 mm (5.6 in)\u003c\/li\u003e\n\u003cli\u003eDimensions (A x B x C): 470 x 334 x 120 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion: 11 mm (one-way)\u003c\/li\u003e\n\u003cli\u003eMagnet: High density flux ferrite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car audio enthusiasts who want components that integrate cleanly with OEM systems without sacrificing sound quality or boot space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-low-profile sealed box (142 mm \/ 5.6 in tall), tuned specifically for the APS 10 D driver.\u003c\/li\u003e\n\u003cli\u003e2 Sides\/2 Sounds: choose Down-Firing mounting for extended low-frequency reach, or Up-Firing for more punch and definition.\u003c\/li\u003e\n\u003cli\u003eLevelling feet with velcro inserts included for secure carpet grip with easy removal.\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug) offers traditional push contacts and a Plug-\u0026amp;-Play terminal block for easy impedance configuration and quick release.\u003c\/li\u003e\n\u003cli\u003eRounded corners aid boot positioning and reinforce the enclosure to reduce resonance.\u003c\/li\u003e\n\u003cli\u003eCone, dustcap and basket geometry engineered for 11 mm (one-way) linear excursion.\u003c\/li\u003e\n\u003cli\u003eMassive motor assembly optimised with FEM (Finite Element Modelling) for control under high excursion conditions.\u003c\/li\u003e\n\u003cli\u003eWater-repellent pressed paper 10\" cone, profiled using FEM simulation and validated with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eDesigned to pair with the AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit\/AP4 D (2 CH bridged) amplifiers, making use of their bass boost and integrated parametric DSP.\u003c\/li\u003e\n\u003cli\u003eSturdy metal driver grille included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe APBX 10 DS is the flagship Prima subwoofer enclosure, built for the highest-performing Prima systems and intended for use with the AP1 D amplifier on the sub channel. Mechanical excursion beyond 18 mm delivers strong authority, while the Thiele \u0026amp; Small parameter setup balances performance across all music genres.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712762470666,"sku":"90208","price":379.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-subwoofer-audison-prima-apbx-10-ds-10-passive-sub-box-compact-subwoofer-enclosure-400w-47165812572426.jpg?v=1748431911"},{"product_id":"audison-prima-aps-10-d-10-car-subwoofer-driver-dual-4-ohm-sub-with-grill-400w","title":"Audison Prima APS 10 D 10\" Car Subwoofer Driver Dual 4 Ohm Sub with Grill 400w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APS 10 D is a 10-inch (250mm) dual 4+4 ohm shallow subwoofer driver rated at 400W continuous (800W peak), with a 120mm ultra-low profile mounting depth and a steel mesh grille included. It is part of the Audison Prima range, designed for compact sealed enclosures of 10–12 litres.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the dual voice coil version. This subwoofer is also available as a single 4 ohm voice coil in the \u003ca href=\"\/products\/audison-prima-aps-10-s4s-10-car-subwoofer-driver-single-4-ohm-sub-with-grill-400w\"\u003eAudison Prima APS 10 S4S\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250mm)\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4+4 ohm voice coils\u003c\/li\u003e\n\u003cli\u003ePower: 400W continuous \/ 800W peak\u003c\/li\u003e\n\u003cli\u003eMounting profile: 120mm (4.7 inch)\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: sealed, 10–12 litres\u003c\/li\u003e\n\u003cli\u003eXmax: 12.6mm (11mm linear excursion one-way)\u003c\/li\u003e\n\u003cli\u003eVoice coil: 60mm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 84dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAudison Prima\u003c\/h2\u003e\n\u003cp\u003eAudison Prima is designed for car enthusiasts who want maximum audio performance from components that integrate with factory (OEM) systems without compromising on space. The APS 10 D delivers high output in ultra-compact sealed enclosures from 10 to 12 litres. Both the dual and single voice coil versions use push connectors for easy wiring and flexible configurations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-low 120mm (4.7 inch) mounting profile for maximum installation flexibility.\u003c\/li\u003e\n\u003cli\u003eOptimised for sealed enclosures from 10 litres.\u003c\/li\u003e\n\u003cli\u003eSpecial cone-dustcap-basket geometry provides 11mm one-way linear excursion while keeping mounting depth to a minimum.\u003c\/li\u003e\n\u003cli\u003eAir vents on the basket underneath the spider eliminate the need for a central pole vent, allowing mounting close to the rear wall of the enclosure.\u003c\/li\u003e\n\u003cli\u003eMassive motor assembly optimised with FEM (Finite Element Modelling) for precise control under high power and high excursion conditions.\u003c\/li\u003e\n\u003cli\u003eWater-repellent pressed paper 10-inch cone, developed with FEM simulation and verified with the Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eDual voice coil design suitable for use with AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH), or AP4.9 bit\/AP4 D (2 CH bridged) amplifiers.\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille and plastic gasket included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOutput depends on excursion — the more air the cone moves, the louder the output. Traditionally, reduced mounting depth has meant limited excursion, but the APS 10 D's cone-dustcap-basket geometry maintains large excursion while keeping depth minimal. The surround and spider are tuned to prevent rocking-mode distortion. The cooling circuit uses basket air vents beneath the spider rather than bottom-plate vents, so the driver can sit close to the enclosure's rear wall — making the most of its compact form factor. If you prefer a ready-built solution, the \u003ca href=\"\/products\/audison-prima-apbx-10-as2-10-active-subwoofer-enclosure-compact-sub-box-400w\"\u003eAudison Prima APBX 10 AS2\u003c\/a\u003e is a 10-inch active subwoofer enclosure rated at 400W.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712783606026,"sku":"90222","price":249.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-subwoofer-audison-prima-aps-10-s4s-10-car-subwoofer-driver-single-4-ohm-sub-with-grill-47165846290698.jpg?v=1748430828"},{"product_id":"audison-prima-apbx-10-as2-10-active-subwoofer-enclosure-compact-sub-box-400w","title":"Audison Prima APBX 10 AS2 10\" Active Subwoofer Enclosure Compact Sub Box 400w","description":"\u003cp\u003e\u003cstrong\u003eThe Audison Prima APBX 10 AS2 is a compact active subwoofer enclosure featuring a 250 mm (10-inch) driver and a built-in 400 W RMS Class D amplifier. It is part of the Audison Prima range, designed for OEM and aftermarket integration in applications where boot space is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your SSP connector is damaged or lost, a replacement is available: \u003ca href=\"\/products\/audison-prima-ssp-replacement-sub-smart-plug-for-apbx-10-as-apbx-8-as\"\u003eAudison Prima SSP Replacement Sub Smart Plug\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 250 mm (10-inch APS 10 DL high-impedance)\u003c\/li\u003e\n\u003cli\u003eAmplifier: integrated 400 W RMS Class D (He-Li technology)\u003c\/li\u003e\n\u003cli\u003ePeak power: 800 W\u003c\/li\u003e\n\u003cli\u003eEnclosure type: air suspension (sealed), ultra-low profile — 158 mm (6.22 in.) depth\u003c\/li\u003e\n\u003cli\u003eInputs: high-level via multi-pin connector; low-level RCA\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: Butterworth 12 dB\/Oct, variable 50–300 Hz, defeatable\u003c\/li\u003e\n\u003cli\u003ePhase control: 0–180°\u003c\/li\u003e\n\u003cli\u003eBass boost: 0–6 dB @ 45 Hz\u003c\/li\u003e\n\u003cli\u003eAuto turn-on (ART): selectable — Remote-in, Hi-level, or Audio signal\u003c\/li\u003e\n\u003cli\u003eMounting: 2S² — down-firing or up-firing\u003c\/li\u003e\n\u003cli\u003eIncludes: HRC AP remote control, SSP Plug \u0026amp; Play terminal block, metal grille, levelling feet with Velcro inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAudison Prima APBX 10 AS2 Active Sub Box\u003c\/h2\u003e\n\n\u003cp\u003eThe Audison Prima range was designed for car enthusiasts who want accurate, nuanced bass that integrates cleanly with OEM systems without sacrificing boot space. The APBX 10 AS2 brings a dedicated high-performance amplification module to the passive Prima box platform, combining the 2S² design, SSP Plug \u0026amp; Play terminal block and an ultra-compact sealed enclosure in a single unit.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 400 W RMS Class D amplifier using He-Li (High-Efficiency \/ Low Impedance) technology — no switching power supply, achieving up to 90% efficiency.\u003c\/li\u003e\n\u003cli\u003eDBT (Dynamic Bass Tracking) input stage enables full use of the He-Li amplifier's power output, maintaining tight, dynamic bass at high listening volumes.\u003c\/li\u003e\n\u003cli\u003eButterworth low-pass filter at 12 dB\/Oct with variable cut frequency (50–300 Hz), phase control (0–180°), and adjustable bass boost 0–6 dB @ 45 Hz.\u003c\/li\u003e\n\u003cli\u003eDefeatable filter for use with a dedicated sub output from a bit or AP bit processor.\u003c\/li\u003e\n\u003cli\u003eHigh-level audio input on multi-pin connector for OEM integration; low-level RCA input for aftermarket head units.\u003c\/li\u003e\n\u003cli\u003eART (Automatic Remote Turn-On) selectable between Remote-in, Hi-level, and Audio signal detection.\u003c\/li\u003e\n\u003cli\u003eUltra-low profile enclosure — 158 mm (6.22 in.) deep — in air suspension, optimised for the APS 10 DL driver.\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug) terminal block with Plug \u0026amp; Play connector for safe, easy removal and refitting.\u003c\/li\u003e\n\u003cli\u003e2S² (2 Sides \/ 2 Sounds) design: down-firing increases low-frequency extension; up-firing delivers more punch and definition.\u003c\/li\u003e\n\u003cli\u003eDown-firing levelling feet with Velcro inserts for secure carpet grip and easy removal.\u003c\/li\u003e\n\u003cli\u003eRounded corners aid boot placement and reduce enclosure resonances.\u003c\/li\u003e\n\u003cli\u003eCone, dust-cap and basket geometry engineered for a wide linear excursion of 9 mm (one direction) at minimal mounting depth.\u003c\/li\u003e\n\u003cli\u003eHRC AP remote control included.\u003c\/li\u003e\n\u003cli\u003eSturdy metal grille included for full driver protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHe-Li Amplification Module\u003c\/h2\u003e\n\u003cp\u003eThe 400 W RMS amplification module uses He-Li (High-Efficiency \/ Low Impedance) technology. By eliminating the DC-DC voltage booster, it reaches approximately 90% efficiency — close to the theoretical limit of Class D design. The DBT (Dynamic Bass Tracking) input stage ensures the amplifier operates at full capacity, delivering controlled, dynamic bass even at high volume levels.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45712836067594,"sku":"90207","price":529.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/audison-subwoofer-audison-prima-apbx-10-as2-10-active-subwoofer-enclosure-compact-sub-box-400w-47165909434634.jpg?v=1748431781"},{"product_id":"hertz-mille-legend-ml-2500-3-10-inch-single-voice-coil-4-ohm-subwoofer-700w-rms","title":"Hertz Mille Legend ML 2500.3 10 Inch Single Voice Coil 4 ohm Subwoofer 700w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Legend ML 2500.3 is a 10 inch (250 mm) single voice coil 4 ohm subwoofer rated at 700 W RMS. It features a 100 mm voice coil, neodymium magnet, and is optimised for compact sealed enclosures. It is part of the Hertz Mille Legend range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMatching grilles: the steel mesh \u003ca href=\"\/products\/hertz-mille-pro-mg-250-3-10-inch-steel-mech-sub-grille-pro-legend-subwoofer\"\u003eMG 250.3\u003c\/a\u003e or the die-cast aluminium \u003ca href=\"\/products\/hertz-mille-legend-mlg-2500-3-10-inch-25cm-subwoofer-grille-for-ml-2500-3-sub\"\u003eMLG 2500.3\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250 mm (10 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 700 W continuous, 1400 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms, single voice coil\u003c\/li\u003e\n\u003cli\u003eVoice coil: 100 mm (4 inch)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 27 to 500 Hz\u003c\/li\u003e\n\u003cli\u003eMagnet: neodymium\u003c\/li\u003e\n\u003cli\u003eXmech: ±27 mm\u003c\/li\u003e\n\u003cli\u003eSealed enclosure volume: 17 to 25 litres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eML 2500.3 Legend\u003c\/h2\u003e\n\u003cp\u003eDesigned to reproduce the impact and emotion of live bass in a car environment, the ML 2500.3 combines extreme power handling with a compact, installation-friendly form factor optimised for sealed box use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge neodymium magnet optimised with FEA simulations for magnetic field stability at high excursion.\u003c\/li\u003e\n\u003cli\u003eVery low carbon content CNC machined plates for maximum magnetic permeability and low distortion at high power levels.\u003c\/li\u003e\n\u003cli\u003eVoice coil internal magnet with high size\/performance ratio for maximum efficiency.\u003c\/li\u003e\n\u003cli\u003eCCAW 100 mm (4 inch) voice coil handling 1400 W musical power, keeping working temperature low and minimising dynamic compression.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound using the In\/Out method for even cooling across coil layers.\u003c\/li\u003e\n\u003cli\u003eVoice coil wound on TIL former: fibreglass-based material combining the heat dissipation of aluminium with the stiffness of Polyamide composites.\u003c\/li\u003e\n\u003cli\u003eCentral pole with Aluminium Shorting Ring for minimum distortion and maximum low-frequency extension.\u003c\/li\u003e\n\u003cli\u003eBoundary Free IIR rubber surround for higher SPL from the same external diameter.\u003c\/li\u003e\n\u003cli\u003eExponential V-cone® with optimised geometry for high stiffness and resistance to deformation at maximum excursion.\u003c\/li\u003e\n\u003cli\u003eMineral-injected paper cone for superior rigidity and damping.\u003c\/li\u003e\n\u003cli\u003eAcoustically transparent anti-resonant aluminium alloy basket with six-spoke self-standing structure and built-in venting holes beneath the spider.\u003c\/li\u003e\n\u003cli\u003eCNC machined diamond-cut basket edge featuring the Hertz logo.\u003c\/li\u003e\n\u003cli\u003eErgonomic, ultra-compact design with electro-acoustic parameters optimised for sealed box applications with 17–25 litre volume.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712847733002,"sku":"90820","price":749.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-legend-ml-2500-3-10-inch-single-voice-coil-4-ohm-subwoofer-700w-rms-47165930373386.jpg?v=1748431750"},{"product_id":"hertz-mille-pro-mp-250-d4-3-10-inch-dual-voice-coil-car-subwoofer-sub-4ohms-600w","title":"Hertz Mille Pro MP 250 D4.3 10 Inch Dual Voice Coil Car Subwoofer Sub 4ohms 600w","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 250 D4.3 is a 10 inch (250 mm) dual voice coil car subwoofer with two 4 ohm coils, rated at 600 W RMS and 1200 W peak. It is part of the Mille Pro range, built using technologies inherited from the flagship Mille Legend line.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with 2+2 ohm coils as the \u003ca href=\"\/products\/hertz-mille-pro-mp-250-d2-3-10-inch-dual-voice-coil-car-subwoofer-sub-2ohms-600w\"\u003eMP 250 D2.3\u003c\/a\u003e. Matching grille: \u003ca href=\"\/products\/hertz-mille-pro-mg-250-3-10-inch-steel-mech-sub-grille-pro-legend-subwoofer\"\u003eMG 250.3\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250 mm (10 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 600 W continuous, 1200 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm (4+4)\u003c\/li\u003e\n\u003cli\u003eVoice coil: 65 mm, four-layer, TIL-P former\u003c\/li\u003e\n\u003cli\u003eMagnet: high density flux ferrite\u003c\/li\u003e\n\u003cli\u003eCone: pressed pulp with mineral powders, V-cone® profile\u003c\/li\u003e\n\u003cli\u003eSurround: high-purity IIR-butyl rubber\u003c\/li\u003e\n\u003cli\u003eBasket: compact 6-spoke aluminium alloy anti-resonant\u003c\/li\u003e\n\u003cli\u003eXmech: ±27 mm\u003c\/li\u003e\n\u003cli\u003eTerminals: push type, up to 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMP 250 D4.3 PRO\u003c\/h2\u003e\n\u003cp\u003e250 mm (10 in.) | Subwoofer | 1200 W | 4+4 Ohm\u003c\/p\u003e\n\u003cp\u003eThe Mille Pro range delivers extreme dynamics, high power handling and a realistic sound stage in a compact footprint. The MP 250 D4.3 carries over key materials and construction techniques from the Mille Legend flagship line to bring that performance to a wider audience.\u003c\/p\u003e\n\u003cp\u003eThe cone is made by pressing paper pulp with injected mineral powders — the same technique used for Legend. The V-cone® profile adds rigidity so the cone behaves like a piston. The surround is high-purity IIR-butyl rubber. Like the Legend ML2000.3 and ML2500.3, Mille Pro subwoofers use Boundary Free Surround technology, which increases the effective emission surface for a given diameter and raises sound pressure output.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminium alloy anti-resonant basket is shared with the top-model ML 2500.3. It aids mechanical damping and remains acoustically transparent. The 65 mm four-layer voice coil is wound on a TIL-P former, delivering high linear displacement.\u003c\/p\u003e\n\u003cp\u003eThe 4 Ω + 4 Ω DVC impedance configuration gives flexibility to match a wide range of amplifier systems. The air cooling and decompression system removes the need for a centre hole on the bottom plate, providing three benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia, keeping operating temperatures low during musical transients.\u003c\/li\u003e\n\u003cli\u003eMaximised magnetic field to the coil within the same overall motor dimensions — more iron in the pole reduces the risk of magnetic saturation and exploits maximum flux density from the magnet.\u003c\/li\u003e\n\u003cli\u003eThe subwoofer can be mounted directly against the box wall. A damping rubber disc (supplied) secures it and maintains air exchange through the 10 vents on the bottom plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHoles behind the voice coil winding and the 10 bottom-plate vents increase air exchange to the coil's inner layers. They work with an innovative assembly system that forces air through the air gap, keeping coil temperature low even under extreme use. The push-type terminals include an anti-short-circuit cover and accept cables up to 8 AWG, keeping wiring resistance ultra-low in 1 ohm configurations.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712852680970,"sku":"90837","price":369.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mp-250-d4-3-10-inch-dual-voice-coil-car-subwoofer-sub-4ohms-600w-47165941809418.jpg?v=1748431736"},{"product_id":"hertz-mille-pro-mp-250-d2-3-10-inch-dual-voice-coil-car-subwoofer-sub-2ohms-600w","title":"Hertz Mille Pro MP 250 D2.3 10 Inch Dual Voice Coil Car Subwoofer Sub 2ohms 600w","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MP 250 D2.3 is a 10 inch (250 mm) dual voice coil car subwoofer with two 2 ohm coils, rated at 600 W RMS and 1200 W peak. It is part of the Mille Pro range, built using technologies derived from the Hertz Mille Legend flagship line.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with 4+4 ohm coils as the \u003ca href=\"\/products\/hertz-mille-pro-mp-250-d4-3-10-inch-dual-voice-coil-car-subwoofer-sub-4ohms-600w\"\u003eMP 250 D4.3\u003c\/a\u003e. Matching grille: \u003ca href=\"\/products\/hertz-mille-pro-mg-250-3-10-inch-steel-mech-sub-grille-pro-legend-subwoofer\"\u003eMG 250.3\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250 mm (10 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 600 W continuous, 1200 W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 2 ohm (2+2)\u003c\/li\u003e\n\u003cli\u003eVoice coil: 65 mm, four-layer, TIL-P former\u003c\/li\u003e\n\u003cli\u003eMagnet: high density flux ferrite\u003c\/li\u003e\n\u003cli\u003eCone: pressed pulp with mineral powders, V-cone® profile\u003c\/li\u003e\n\u003cli\u003eSurround: high-purity IIR-butyl rubber\u003c\/li\u003e\n\u003cli\u003eBasket: compact 6-spoke aluminium alloy anti-resonant\u003c\/li\u003e\n\u003cli\u003eXmech: ±27 mm\u003c\/li\u003e\n\u003cli\u003eTerminals: push type, up to 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMP 250 D2.3 PRO\u003c\/h2\u003e\n\u003cp\u003e250 (10) mm (in.) | Subwoofers | 1200 W | 2+2 Ohm\u003c\/p\u003e\n\u003cp\u003eExtreme dynamics, unlimited power handling, realistic sound stage.\u003c\/p\u003e\n\u003cp\u003eThe Mille Pro range targets outstanding performance in a compact size. Drawing on experience from the Mille Legend line, the R\u0026amp;D team has refined the production process to bring Hertz Sound Experience technology to a broader audience.\u003c\/p\u003e\n\u003cp\u003eThe MP 250 D2.3 cone is pressed paper pulp with injected mineral powders — the same construction used for Legend. The V-cone® profile adds rigidity so the cone operates like a piston. The surround is high-purity IIR-butyl rubber. Like the Legend ML2000.3 and ML2500.3, Mille Pro subwoofers use Boundary Free Surround technology, which increases the emission surface within the same diameter to generate higher sound pressure.\u003c\/p\u003e\n\u003cp\u003eThe compact 6-spoke aluminium alloy anti-resonant basket is shared with the top-model ML 2500.3, contributing to mechanical damping without colouring the sound. The 65 mm four-layer voice coil is wound in a TIL-P former, delivering high linear displacement.\u003c\/p\u003e\n\u003cp\u003eThe 2 Ω + 2 Ω DVC impedance configuration offers flexibility to match a wide range of amplifier systems. The air cooling and decompression system removes the need for a centre hole on the bottom plate, providing three benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter thermal inertia, keeping operating temperatures low during musical transients.\u003c\/li\u003e\n\u003cli\u003eMaximised magnetic field to the coil within the same motor dimensions — more iron in the pole reduces the risk of magnetic saturation and exploits maximum flux density from the magnet.\u003c\/li\u003e\n\u003cli\u003eThe subwoofer can be mounted directly against the enclosure wall. A damping rubber disc (included) secures it to the box and maintains air exchange through the 10 vents on the bottom plate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVents behind the voice coil winding and 10 vents on the bottom plate increase air exchange to the coil's inner layers. These work with an innovative assembly system that forces air through the air gap, keeping coil temperature low even under extreme musical programmes. Push-type terminals with an anti-short-circuit cover accept cables up to 8 AWG, providing ultra-low wiring resistance in low impedance configurations (1 ohm).\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45712853500170,"sku":"90836","price":369.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mp-250-d2-3-10-inch-dual-voice-coil-car-subwoofer-sub-2ohms-600w-47165942628618.jpg?v=1748431727"},{"product_id":"focal-sub10wm-utopia-m-series-10-sub-subwoofer-400w-rms","title":"Focal SUB10WM Utopia M Series 10\" Sub Subwoofer 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal SUB10WM is a 10\" (250mm) subwoofer from the Utopia M series, rated at 400W RMS (800W maximum). It features an M-profile W sandwich cone, a 4.7\" (120mm) dual voice coil and a neodymium motor, and fits a sealed enclosure of just 10 litres minimum. Designed and manufactured in France at Focal's Saint-Étienne workshops.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" (250mm)\u003c\/li\u003e\n\u003cli\u003eVoice coil: 4.7\" (120mm), dual\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 x 4 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W nominal, 800W maximum\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87.5dB (2.83V\/1m)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25Hz – 800Hz\u003c\/li\u003e\n\u003cli\u003eMinimum sealed enclosure: 10L (0.35 cu ft)\u003c\/li\u003e\n\u003cli\u003eMotor: neodymium\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUtopia M SUB10WM subwoofer\u003c\/h2\u003e\n\u003cp\u003eFocal's engineers introduced their M-profile W cone to a subwoofer for the first time in this driver. Combined with the 4.7\" (120mm) dual voice coil and neodymium motor, it delivers exceptional dynamics and audiophile sound from a minimum 10L sealed enclosure.\u003c\/p\u003e\n\n\u003ch2\u003eKey points\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM-profile W sandwich cone\u003c\/li\u003e\n\u003cli\u003eHighly compact — minimum 10L (0.35 cu ft) sealed enclosure\u003c\/li\u003e\n\u003cli\u003eNeodymium motor\u003c\/li\u003e\n\u003cli\u003e400W RMS \/ 800W maximum power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAn à la carte concept\u003c\/h2\u003e\n\u003cp\u003eThe Utopia M line is designed to let you build a fully bespoke car audio system, choosing each driver to suit your vehicle and your requirements.\u003c\/p\u003e\n\n\u003ch2\u003eM-profile W sandwich cone\u003c\/h2\u003e\n\u003cp\u003eThe patented M-profile cone is made from a single piece, combining rigidity, lightness and damping. It delivers an extremely linear frequency response, low distortion and wide sound dispersion. The result is striking realism and detail in the bass.\u003c\/p\u003e\n\n\u003ch2\u003eProgressive spider\u003c\/h2\u003e\n\u003cp\u003eThe progressive spider fitted to all Utopia M drivers reproduces bass impact whilst optimising linearity, precision and dynamics.\u003c\/p\u003e\n\n\u003ch2\u003eMade in France\u003c\/h2\u003e\n\u003cp\u003eThe Utopia M range is entirely designed, developed and manufactured in Focal's Saint-Étienne workshops in France. The SUB10WM chassis blends tradition, performance and distinctly French elegance.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45713048305930,"sku":"90575","price":899.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub10wm-utopia-m-series-10-sub-subwoofer-400w-rms-47166207557898.jpg?v=1748431817"},{"product_id":"hertz-cento-cs-250-s4-sub-10-inch-25cm-250mm-car-subwoofer-4ohm-300w-rms","title":"Hertz Cento CS 250 S4 Sub 10 Inch 25cm 250mm Car Subwoofer 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Cento CS 250 S4 is a 10 inch (250 mm) car subwoofer with a single 4 ohm voice coil, rated at 300 W RMS (600 W peak). Part of the Hertz Cento range, it is optimised for compact sealed enclosures from 16 litres.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eNeed a different impedance? See the \u003ca href=\"\/products\/hertz-cento-cs-250-s2-sub-10-inch-25cm-250mm-car-subwoofer-2ohm-300w-rms\"\u003eHertz Cento CS 250 S2 (2 ohm)\u003c\/a\u003e. The optional CG 250 grille is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" \/ 250 mm\u003c\/li\u003e\n\u003cli\u003ePower handling continuous \/ peak: 300 W \/ 600 W\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms, single voice coil\u003c\/li\u003e\n\u003cli\u003eVoice coil: 35 mm, six-layer copper on glass fibre former\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: sealed, from 16 litres\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene\u003c\/li\u003e\n\u003cli\u003eXmech: 16.5 mm\u003c\/li\u003e\n\u003cli\u003eTerminals: push type, accepts cables up to 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptimised for compact enclosures\u003c\/h2\u003e\n\u003cp\u003eThe CS 250 S4 delivers powerful bass from sealed enclosures starting at just 16 litres, making it a practical choice where boot space is limited. Its compact magnetic group and shallow depth mean the enclosure can be shaped closely around the driver, giving maximum installation flexibility in any vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe 4 ohm single voice coil configuration is compatible with a wide range of amplifiers and suits enclosures housing more than one subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eThermal and acoustic performance\u003c\/h2\u003e\n\u003cp\u003eThe six-layer pure copper voice coil is wound on a high thermal resistance glass fibre former. A dedicated cooling system keeps operating temperature in check during extended high-volume listening.\u003c\/p\u003e\n\n\u003cp\u003eA fluid dynamic optimisation system uses the spider support as an air duct towards venting holes in the basket. This reduces turbulence and the acoustic distortion caused by air compression at high excursions.\u003c\/p\u003e\n\n\u003cp\u003eThe cone geometry, suspension and spider are all designed using FEM (Finite Element Method) simulations for low distortion and good control at high mechanical excursions.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElectroacoustic design optimised for sealed enclosures from 16 litres.\u003c\/li\u003e\n\u003cli\u003eFluid dynamic optimisation system reduces distortion caused by air compression at high excursions.\u003c\/li\u003e\n\u003cli\u003ePolypropylene cone and dust cap geometry engineered via FEM simulations for low-frequency distortion reduction.\u003c\/li\u003e\n\u003cli\u003e35 mm, 4 ohm voice coil wound on six layers of pure copper on a high thermal resistance glass fibre former.\u003c\/li\u003e\n\u003cli\u003eMagnetic group geometry optimised with proprietary software for high undistorted SPL at high excursions.\u003c\/li\u003e\n\u003cli\u003eCompact design with no decompression hole — ideal for custom-shaped enclosures.\u003c\/li\u003e\n\u003cli\u003ePush-type terminal block accepts cables up to 8 AWG for low wiring resistance and easy connection in multi-subwoofer installations.\u003c\/li\u003e\n\u003cli\u003eRubber-protected magnetic assembly and high-strength ABS plastic gasket compatible with the optional CG 250 grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOptional grille\u003c\/h2\u003e\n\u003cp\u003eThe optional CG 250 grille uses robust black metal mesh and features the Hertz diamond aluminium logo, providing full protection and a clean finish in the vehicle.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45713064722698,"sku":"90767","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-cento-cs-250-s4-sub-10-inch-25cm-250mm-car-subwoofer-4ohm-300w-rms-47166250909962.jpg?v=1748431568"},{"product_id":"hertz-cento-cs-250-s2-sub-10-inch-25cm-250mm-car-subwoofer-2ohm-300w-rms","title":"Hertz Cento CS 250 S2 Sub 10 Inch 25cm 250mm Car Subwoofer 2ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Cento CS 250 S2 is a 10 inch (250 mm) car subwoofer with a single 2 ohm voice coil, rated at 300 W RMS (600 W peak). It is part of the Hertz Cento range and is optimised for compact sealed enclosures from 16 litres.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeed a different impedance? See the \u003ca href=\"\/products\/hertz-cento-cs-250-s4-sub-10-inch-25cm-250mm-car-subwoofer-4ohm-300w-rms\"\u003eHertz Cento CS 250 S4 (4 ohm)\u003c\/a\u003e. The optional CG 250 grille is sold separately.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" \/ 250 mm\u003c\/li\u003e\n\u003cli\u003ePower handling continuous \/ peak: 300 W \/ 600 W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms, single voice coil\u003c\/li\u003e\n\u003cli\u003eVoice coil: 35 mm, six-layer pure copper on glass fibre support\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: sealed, from 16 litres\u003c\/li\u003e\n\u003cli\u003eCone material: polypropylene\u003c\/li\u003e\n\u003cli\u003eXmech: 16.5 mm\u003c\/li\u003e\n\u003cli\u003eTerminals: push type, accepts cables up to 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptimised for compact installations\u003c\/h2\u003e\n\u003cp\u003eThe CS 250 S2 is engineered to deliver strong bass from sealed enclosures starting at just 16 litres. Its reduced depth, compact magnetic group and absence of a rear decompression hole mean the enclosure can be shaped tightly around the subwoofer — maximising boot space without sacrificing output.\u003c\/p\u003e\n\u003cp\u003eThe 2 ohm single voice coil configuration offers broad compatibility with amplifiers and suits installations running more than one subwoofer.\u003c\/p\u003e\n\u003ch2\u003eThermal and acoustic performance\u003c\/h2\u003e\n\u003cp\u003eThe six-layer copper voice coil runs a dedicated cooling system that keeps operating temperature in check during extended high-volume sessions. An internal fluid dynamic optimisation system — using the spider support as an air duct towards venting holes in the basket — reduces acoustic distortion caused by air compression at high excursions.\u003c\/p\u003e\n\u003cp\u003eThe cone geometry, suspension and spider were developed using FEM (Finite Element Method) simulations to minimise distortion at high mechanical excursions.\u003c\/p\u003e\n\u003ch2\u003eBuild and installation features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElectroacoustic parameters optimised for sealed enclosures from 16 litres.\u003c\/li\u003e\n\u003cli\u003ePolypropylene cone and dust cap geometry engineered via FEM simulations for low-frequency distortion reduction.\u003c\/li\u003e\n\u003cli\u003e35 mm 2 ohm voice coil wound on six layers of pure copper on a high thermal-resistance glass fibre support.\u003c\/li\u003e\n\u003cli\u003eMagnetic group geometry optimised with proprietary software for high undistorted SPL at high excursions.\u003c\/li\u003e\n\u003cli\u003eNo decompression hole — ideal for custom boxes shaped closely around the driver.\u003c\/li\u003e\n\u003cli\u003ePush-type terminal block accepts cables up to 8 AWG for low wiring resistance and easy connection in multi-subwoofer installs.\u003c\/li\u003e\n\u003cli\u003eRubber-protected magnetic assembly and high-strength ABS plastic gasket compatible with the optional CG 250 grille.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe optional CG 250 grille in black metal mesh includes a Hertz diamond aluminium logo and provides full protection with a clean, finished look.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45713065476362,"sku":"90766","price":169.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-cento-cs-250-s2-sub-10-inch-25cm-250mm-car-subwoofer-2ohm-300w-rms-47166252089610.jpg?v=1748431579"},{"product_id":"jl-audio-cp110-w0v3-sub-10-single-w0-basswedge-ported-subwoofer-300w-rms","title":"JL Audio CP110-W0V3 Sub 10\" Single W0 BassWedge Ported Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CP110-W0v3 is a slot-ported BassWedge enclosure loaded with a single 10-inch \u003ca href=\"\/products\/jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms\"\u003e10W0v3-4\u003c\/a\u003e subwoofer, rated at 300W RMS into 4 ohms. It is a ready-to-connect, value-focused bass upgrade for drivers who want strong output without building a box. Part of JL Audio's W0 range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10-inch 10W0v3-4\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure: slot-ported BassWedge, MDF construction\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 394 x 350 x 441 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 13.15 kg\u003c\/li\u003e\n\u003cli\u003eGrille: not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJL Audio CP110-W0v3 single 10W0v3 BassWedge, ported, 4 ohm\u003c\/h2\u003e\n\u003cp\u003eEnclosed subwoofer system with single 10W0v3-4 subwoofer, dark grey carpet (300W, 4 ohm), ported enclosure.\u003c\/p\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer, producing strong extension and smooth response. The port mouth is flared to minimise airflow noise.\u003c\/p\u003e\n\u003cp\u003eThe BassWedge shape has extended sides so it can be placed with the woofer firing outward or straight down, off the vehicle floor. It works equally well in forward or rear-firing installations, giving flexibility when positioning and loading the enclosure in your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe system ships wired, loaded and ready to connect via a push-button terminal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: dark grey, high-grade automotive carpet with \"JL AUDIO\" embroidery on the top edge and \"Slot-Ported BassWedge™\" embroidered on the port mouth\u003c\/li\u003e\n\u003cli\u003eConstruction: MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713138286858,"sku":"90987","price":249.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp110-w0v3-sub-10-single-w0-basswedge-ported-subwoofer-300w-rms-55022528397578.jpg?v=1748429602"},{"product_id":"jl-audio-ho110-w6v3-subwoofer-10-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms","title":"JL Audio HO110-W6V3 Subwoofer 10 Inch W6 HO Wedge Ported Sub Enclosure 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio HO110-W6v3 is a compact, ready-to-connect ported wedge subwoofer enclosure loaded with a single 10-inch 10W6v3-D4 driver, rated at 600W RMS at 2 ohms. It is part of JL Audio's W6v3 High Output (H.O.) Wedge enclosure range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10-inch 10W6v3-D4\u003c\/li\u003e\n\u003cli\u003ePower handling: 600W RMS\u003c\/li\u003e\n\u003cli\u003eSystem nominal impedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure type: chamber-coupled, slot-ported, rear-firing H.O. Wedge\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–600W\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 308 x 356 x 552 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 21.7 kg\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eFinish: dark grey automotive carpet with black carpet on the woofer baffle\u003c\/li\u003e\n\u003cli\u003eGrille: not included (SGR-10W6v2\/v3 mesh insert available separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJL Audio HO110-W6v3 single 10W6v3 H.O. Wedge, ported, 2 ohm\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented High Output Enclosures deliver a combination of strong bass output and sound quality in a compact package. In the HO110-W6v3, the high power handling of the 10W6v3 driver and its small enclosure requirements produce impressive output with moderate amplification.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling port output to the woofer's direct output. This also provides the surface area and port length needed to maximise W6v3 driver performance.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is engineered to the optimum ported alignment for the 10W6v3 and has been fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThe system ships wired, loaded and ready to connect via a five-way binding post terminal. The recessed mounting baffle offers some woofer protection; a steel mesh grille insert (SGR-10W6v2\/v3) is available separately for additional protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: dark grey, high-grade automotive carpet with black carpet on the woofer baffle; \"JL AUDIO\" embroidered in silver on the side surface\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–600W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 ohms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713201398026,"sku":"91008","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho110-w6v3-subwoofer-10-inch-w6-ho-wedge-ported-sub-enclosure-600w-rms-47166431527178.jpg?v=1748429286"},{"product_id":"jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms","title":"JL Audio ACP110LG-TW1 10” Active Subwoofer MicroSub+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio ACP110LG-TW1 is a complete amplified subwoofer system from the MicroSub+ range, combining a single 10\" 10TW1-0.25 driver in a slot-ported, low-profile MDF enclosure with a built-in 400W DCD Class D amplifier at 0.25 ohm.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOther MicroSub+ sizes: \u003ca href=\"\/products\/jl-audio-acp108lg-w3v3-8-active-subwoofer-microsub-dcd-amplifier-250w-rms\"\u003eACP108LG-W3v3\u003c\/a\u003e and \u003ca href=\"\/products\/jl-audio-acp112lg-tw1-12-active-subwoofer-microsub-dcd-amplifier-400w-rms\"\u003eACP112LG-TW1\u003c\/a\u003e. The optional \u003ca href=\"\/products\/jl-audio-rbc-1-remote-bass-level-control-for-jd-jx-mx-rd-series-amps-amplifiers\"\u003eJL Audio RBC-1 remote bass level control\u003c\/a\u003e lets you adjust subwoofer level from the driver's seat (sold separately).\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10\" 10TW1-0.25\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifier: 400W DCD Class D @ 0.25 ohm\u003c\/li\u003e\n\u003cli\u003eEnclosure: slot-ported, low-profile, CNC-cut MDF\u003c\/li\u003e\n\u003cli\u003eInputs: RCA (70 mV – 1.40 V) and high-level speaker (280 mV – 5.4 V)\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50–200 Hz, 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003eRemote level control: optional (RBC-1)\u003c\/li\u003e\n\u003cli\u003eExternal dimensions (W x H x D): 533 x 343 x 168 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 11.34 kg\u003c\/li\u003e\n\u003cli\u003eFuse: 30A (ATO or ATC); 8 AWG power\/ground wire recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eDCD amplifier technology\u003c\/h2\u003e\n\u003cp\u003eThe built-in DCD Class D amplifier uses direct power conversion and an ultra-high current output section in place of a conventional switching power supply. This allows it to drive the ultra low-impedance 10TW1-0.25 driver at 0.25 ohm with high efficiency and substantial output from a compact enclosure.\u003c\/p\u003e\n\n\u003ch2\u003eEnclosure design\u003c\/h2\u003e\n\u003cp\u003eThe slot-ported enclosure is precisely tuned to the 10TW1 driver. Extensive internal bracing allows thinner wall material, maximising internal volume relative to external size. The port wraps around two walls to achieve the low tuning frequency needed for strong bass extension, and flared port entry and exit points reduce airflow noise.\u003c\/p\u003e\n\n\u003ch2\u003eIntegration and controls\u003c\/h2\u003e\n\u003cp\u003eConnects to factory or aftermarket head units via RCA or high-level speaker inputs. Automatic turn-on works via signal sensing or DC offset sensing. Controls include a variable low-pass filter (50–200 Hz) and an output polarity switch. A quick-disconnect power connector makes removal straightforward when you need the boot space. Adding the optional RBC-1 remote level control (sold separately) gives driver's-seat volume adjustment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e DCD amplified systems require specific matched components. Never use a DCD amplifier or its companion subwoofer with incompatible, non-DCD products — doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\n\u003ch2\u003eFinish and construction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: black high-grade automotive carpet with silver \"JL AUDIO\" embroidery on the front baffle\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 0.25 ohm\u003c\/li\u003e\n\u003cli\u003eEnclosure and subwoofer built in USA with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713203265802,"sku":"90947","price":699.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acp110lg-tw1-10-active-subwoofer-microsub-dcd-amplifier-400w-rms-47166440866058.jpg?v=1748429296"},{"product_id":"jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms","title":"JL Audio ACS110LG-TW1  10” Active Subwoofer PowerWedge+ DCD Amplifier 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio ACS110LG-TW1 is a 10\" active subwoofer system from JL Audio's PowerWedge+™ range, pairing a single 10TW1-0.25 shallow driver with a built-in 400W RMS DCD™ Class D amplifier in a sealed MDF enclosure just 127 mm (5 in) deep.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10\" ACS110LG-TW1. The PowerWedge+™ range is also available in a \u003ca href=\"\/products\/jl-audio-acs112lg-tw1-12-active-subwoofer-powerwedge-dcd-amplifier-400w-rms\"\u003e12\" version (ACS112LG-TW1)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 1 x 10\" 10TW1-0.25\u003c\/li\u003e\n\u003cli\u003eAmplifier: built-in DCD™ Class D, 400W RMS @ 0.25 Ω\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, low-profile, CNC-cut MDF\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50 Hz – 200 Hz, 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003eInputs: RCA (70 mV – 1.40 V) and high-level (280 mV – 5.4 V)\u003c\/li\u003e\n\u003cli\u003eTurn-on: automatic (signal sensing or DC offset sensing)\u003c\/li\u003e\n\u003cli\u003eDimensions: 470 x 283 x 127 mm (W x H x D)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.12 kg\u003c\/li\u003e\n\u003cli\u003eFuse: 30 A; recommended wire: 8 AWG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eJL Audio ACS110LG-TW1: single 10TW1 PowerWedge+™ with DCD™ amplifier\u003c\/h2\u003e\n\n\u003cp\u003eAmplified subwoofer system with a single 10TW1-0.25 driver, a built-in 400W Class D amplifier and a black carpeted sealed enclosure. System impedance: 0.25 Ω.\u003c\/p\u003e\n\n\u003cp\u003eIn PowerWedge+™ systems, amplification is built directly into the subwoofer enclosure. The proprietary DCD™ amplifier technology combines direct power conversion with an ultra-high current output section, eliminating conventional switching power supplies. This allows the amplifier to drive the ultra low-impedance TW1 driver at high power with high efficiency.\u003c\/p\u003e\n\n\u003cp\u003eThe 10TW1's compact box requirements make it well suited to the low-profile enclosure, which has been engineered to the optimum sealed alignment for that driver and refined through real-world listening. The enclosure is only 127 mm (5 in) deep, preserving as much boot space as possible.\u003c\/p\u003e\n\n\u003cp\u003eIntegration with OEM and aftermarket head units is straightforward, with RCA and high-level inputs and automatic turn-on via signal sensing or DC offset sensing. A variable frequency low-pass filter (50–200 Hz) and output polarity control switch are included. An optional RBC-1 remote level control (sold separately) allows subwoofer level adjustment from the driver's seat. A quick-disconnect power connector makes removal easy when you need the space back.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.\u003c\/p\u003e\n\n\u003cp\u003eFinish: Black high-grade automotive carpet with silver \"JL AUDIO\" embroidery on the front baffle. A steel mesh grille is included.\u003c\/p\u003e\n\n\u003cp\u003eConstruction: CNC-cut high-grade MDF\u003c\/p\u003e\n\n\u003cp\u003eAmplifier power: Built-in DCD™ Class D, 400W @ 0.25 Ω\u003c\/p\u003e\n\n\u003cp\u003eNominal impedance: 0.25 Ω\u003c\/p\u003e\n\n\u003cp\u003eEnclosure and subwoofer built in USA with global components.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713204052234,"sku":"90950","price":649.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-acs110lg-tw1-10-active-subwoofer-powerwedge-dcd-amplifier-400w-rms-47166442963210.jpg?v=1748429265"},{"product_id":"jl-audio-cs110tg-tw3-subwoofer-10-tw3-powerwedge-sealed-sub-enclosure-400w-rms","title":"JL Audio CS110TG-TW3 Subwoofer 10\" TW3 PowerWedge Sealed Sub Enclosure 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CS110TG-TW3 is a ready-to-install sealed Truck PowerWedge subwoofer enclosure, loaded with a single 10-inch 10TW3-D4 driver rated at 400W RMS at 2 ohms. Part of JL Audio's TW3 PowerWedge range, it is built specifically for trucks and space-restricted vehicles, measuring just 159 mm deep at its base.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: single 10-inch 10TW3-D4\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100 to 400W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed truck enclosure\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF, black automotive carpet\u003c\/li\u003e\n\u003cli\u003eWidth x height: 483 x 314 mm (19 x 12.375 in)\u003c\/li\u003e\n\u003cli\u003eDepth at base: 159 mm (6.25 in)\u003c\/li\u003e\n\u003cli\u003eDepth at top: 104 mm (4.1 in)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.6 kg (21.2 lb)\u003c\/li\u003e\n\u003cli\u003eGrille: black steel mesh, included\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCS110TG-TW3\u003c\/h2\u003e\n\u003ch3\u003eSingle 10TW3 Truck PowerWedge, Sealed, 2 Ω\u003c\/h3\u003e\n\u003cp\u003eA compact, ready-to-install sealed subwoofer system built around JL Audio's 10TW3-D4 driver, rated at 400W at 2 Ω. Ideal for trucks where under-seat or behind-seat space is limited.\u003c\/p\u003e\n\u003cp\u003eThe enclosure measures just 6.25 in. (159 mm) deep at the base and 4.1 in. (104 mm) at the top. JL Audio engineered the internal volume to the optimum sealed alignment for the 10TW3, then refined it through extensive real-world listening. If you need a smaller option, JL Audio also offer the \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8W3V3-4 8\" W3 Series subwoofer driver\u003c\/a\u003e for comparison.\u003c\/p\u003e\n\u003cp\u003eIt arrives wired, loaded and ready to connect via the five-way binding post terminal — no extra assembly required.\u003c\/p\u003e\n\n\u003ch2\u003eFinish \u0026amp; construction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlack high-grade automotive carpet with \"JL AUDIO\" embroidered in silver on the front baffle\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included for driver protection\u003c\/li\u003e\n\u003cli\u003eCNC-cut high-grade MDF construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eEnclosure specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNominal impedance: 2 Ω\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100 – 400W\u003c\/li\u003e\n\u003cli\u003eEnclosure depth (base): 6.25 in. (159 mm)\u003c\/li\u003e\n\u003cli\u003eEnclosure depth (top): 4.1 in. (104 mm)\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713210704138,"sku":"90994","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs110tg-tw3-subwoofer-10-tw3-powerwedge-sealed-sub-enclosure-400w-rms-47166449647882.jpg?v=1748429246"},{"product_id":"jl-audio-ho110rg-w3v3-subwoofer-10-inch-ho-wedge-ported-sub-enclosure-500w-rms","title":"JL Audio HO110RG-W3V3 Subwoofer 10 Inch HO Wedge Ported Sub Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio HO110RG-W3V3 is a high-output, wedge-style ported subwoofer enclosure housing a single 10-inch 10W3v3-2 driver, rated at 500W RMS at 2 ohms. It is part of JL Audio's H.O. Wedge enclosed subwoofer range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10-inch 10W3v3-2\u003c\/li\u003e\n\u003cli\u003eEnclosure type: chamber-coupled, slot-ported, rear-firing H.O. Wedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W (best performance with 300–500W)\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: three solid aluminium bars\u003c\/li\u003e\n\u003cli\u003eDimensions: 749mm W x 343mm H x 305mm D (190.5mm top depth)\u003c\/li\u003e\n\u003cli\u003eWeight: 15.74kg\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eFinish: dark grey high-grade automotive carpet with black carpet on woofer baffle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHO110RG-W3v3 single 10W3v3 H.O. Wedge enclosed subwoofer system, ported, dark grey \/ black carpet (500W, 2Ω)\u003c\/h2\u003e\n\n\u003cp\u003eJL Audio's patented High Output Enclosures are engineered to deliver high-performance bass, combining strong output with sound quality.\u003c\/p\u003e\n\n\u003cp\u003eThe patented chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling port output directly to the woofer's output. This maximises the surface area and port length needed to get the best from the W3v3 driver.\u003c\/p\u003e\n\n\u003cp\u003eThe enclosure is tuned to the optimum ported alignment for the 10W3v3. It will produce strong output from as little as 150W of amplifier power, and performs best with 300–500W.\u003c\/p\u003e\n\n\u003cp\u003eThe system ships wired, loaded, and ready to connect via the five-way binding post terminal. Three solid aluminium bars provide stylish, rugged woofer protection.\u003c\/p\u003e\n\n\u003cp\u003eThe angled-back design lets the enclosure sit flush against the back of a vehicle's rear seat, saving boot space.\u003c\/p\u003e\n\n\u003cp\u003eFinish: dark grey high-grade automotive carpet, black carpet on the woofer baffle. \"JL AUDIO\" is embroidered in silver on the top surface.\u003c\/p\u003e\n\n\u003cp\u003eConstruction: CNC-cut high-grade MDF.\u003c\/p\u003e\n\n\u003cp\u003eRecommended amplifier power: 150–500W.\u003c\/p\u003e\n\n\u003cp\u003eNominal impedance: 2Ω.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713211359498,"sku":"91009","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-ho110rg-w3v3-subwoofer-10-inch-ho-wedge-ported-sub-enclosure-500w-rms-47166451482890.jpg?v=1748429250"},{"product_id":"edge-10-inch-active-bass-box-sub-subwoofer-ported-enclosure-edb10a-250w-rms","title":"Edge 10 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB10A 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Edge EDB10A-E0 V2 is a self-contained 10-inch active subwoofer in a ported enclosure with a built-in Edge amplifier, rated at 250W RMS and 750W peak. It belongs to Edge's EDB active bass enclosure range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10-inch 250W RMS model. The Edge EDB active bass enclosure range is also available as the \u003ca href=\"\/products\/edge-12-inch-active-bass-box-sub-subwoofer-ported-enclosure-edb12a-300w-rms\"\u003eEDB12A 12-inch 300W RMS version\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 10-inch Edge driver\u003c\/li\u003e\n\u003cli\u003ePower: 250W RMS, 750W peak\u003c\/li\u003e\n\u003cli\u003eAmplifier: built-in Edge 72100 amp\u003c\/li\u003e\n\u003cli\u003eEnclosure: ported, with side-mounted port for a compact design\u003c\/li\u003e\n\u003cli\u003eConstruction: high-density MDF, finished in carpet with Edge detailing\u003c\/li\u003e\n\u003cli\u003eCooling: anodised extruded aluminium heatsink\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eEdge EDB10A-E0 10-inch V2 active enclosure\u003c\/h2\u003e\n\u003cp\u003eThe Edge EDB10A V2 is a self-contained 10-inch active subwoofer in a ported enclosure. It delivers 250W RMS in a compact, tough build with no separate amplifier needed.\u003c\/p\u003e","brand":"Edge","offers":[{"title":"Default Title","offer_id":45713231544586,"sku":"90433","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/edge-subwoofer-edge-10-inch-active-bass-box-sub-subwoofer-ported-enclosure-edb10a-250w-rms-47166490247434.jpg?v=1748431404"},{"product_id":"jl-audio-10tw3-d4-10-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms","title":"JL Audio 10TW3-D4 10 Inch TW3 Series Shallow Mount Subwoofer Dual 4 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10TW3-D4 is a 10-inch (250mm) shallow-mount subwoofer from the TW3 Series, with dual 4 ohm voice coils and 400W RMS power handling. It is designed for very small sealed enclosures and tight spaces where a conventional subwoofer will not fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe TW3 Series is also available as an \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8-inch W3 Series subwoofer\u003c\/a\u003e if a smaller driver suits your install.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10in (250mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–400W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax): 0.6in (15.2mm), one-way\u003c\/li\u003e\n\u003cli\u003eSensitivity (1W\/1m): 82.10dB SPL\u003c\/li\u003e\n\u003cli\u003eFree air resonance (Fs): 32.30Hz\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.625in (244mm)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 3.25 \/ 3.50 inches\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.6kg (10.1lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10TW3-D4 shallow mount\u003c\/h2\u003e\n\u003cp\u003eBuilding on the core technology of JL Audio's TW5 thin-line subwoofers, the TW3 Series delivers shallow mounting depth alongside impressive excursion capability — greater, in fact, than the W3v3s. JL Audio's patented thin-line woofer technology uses a concentric tube structure built into the injection-moulded cone body. This supports the voice coil and a full annular spider, while moving the large motor structure further forward than conventional designs allow.\u003c\/p\u003e\n\u003cp\u003eTW3s are optimised for small sealed enclosures and use JL Audio's tab-ear mounting design to maximise cone area within the mounting footprint.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth: 3.25 \/ 3.50 inches\u003c\/li\u003e\n\u003cli\u003eNo pole vent — permits mounting close to the rear wall of the enclosure\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion capability: 0.60in \/ 15.2mm one-way\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003eConcentric tube architecture\u003c\/li\u003e\n\u003cli\u003ePatented floating cone attach method technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminium-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713245208842,"sku":"90917","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw3-d4-10-inch-tw3-series-shallow-mount-subwoofer-dual-4-ohm-400w-rms-47166517346570.jpg?v=1748429735"},{"product_id":"jl-audio-10tw3-d8-10-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms","title":"JL Audio 10TW3-D8 10 Inch TW3 Series Shallow Mount Subwoofer Dual 8 ohm 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10TW3-D8 is a 10-inch (250 mm) TW3 Series shallow-mount subwoofer with dual 8 ohm voice coils, rated at 400W RMS, and a mounting depth of just 83 mm. It is part of JL Audio's TW3 thin-line subwoofer range, designed for deep bass in small sealed enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS (200–400W recommended)\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 8 ohm voice coils\u003c\/li\u003e\n\u003cli\u003eMounting depth: 83 mm (3.25 inch)\u003c\/li\u003e\n\u003cli\u003eLinear excursion: 15.2 mm (0.60 in) one-way\u003c\/li\u003e\n\u003cli\u003eMounting hole: 244 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 4.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTW3 thin-line technology\u003c\/h2\u003e\n\u003cp\u003eThe TW3 builds on the core technology of JL Audio's TW5 thin-line subwoofers, combining a shallow mounting depth with excursion capability that exceeds that of the W3v3 series. If you need a standard-depth option, the \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003eJL Audio 8W3V3-4 W3 Series subwoofer\u003c\/a\u003e is also available.\u003c\/p\u003e\n\u003cp\u003eJL Audio's patented thin-line woofer technology uses a \"concentric tube\" structure built into the injection-moulded cone body. This supports the voice coil and a full annular spider, while allowing the large motor structure to sit further forward than in conventional designs — making the shallow mounting depth possible without sacrificing excursion.\u003c\/p\u003e\n\u003cp\u003eThe TW3-D8 uses a tab-ear mounting design to maximise cone area within its mounting footprint, and requires only a very small sealed enclosure volume.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth: 3.25 \/ 3.50 inches\u003c\/li\u003e\n\u003cli\u003eNo pole vent — permits mounting close to the rear wall of an enclosure\u003c\/li\u003e\n\u003cli\u003eVery small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eVery long linear excursion: 15.2 mm (0.60 in) one-way\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003e\"Concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eAluminium-alloy dust cap and rear cap with JL Audio logo\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory using global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713246847242,"sku":"90918","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw3-d8-10-inch-tw3-series-shallow-mount-subwoofer-dual-8-ohm-400w-rms-47166519738634.jpg?v=1748429729"},{"product_id":"jl-audio-10tw1-4-10-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms","title":"JL Audio 10TW1-4 10 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10TW1-4 is a 10-inch (250mm) shallow-mount subwoofer from the TW1 series, rated at 300W RMS into 4 ohms, with a mounting depth of just 111mm. Designed for under-seat and space-restricted installs, it operates in sealed enclosures from as little as 0.35 cu ft (10 litres).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 4 ohm version. The TW1 series is also available in \u003ca href=\"\/products\/jl-audio-10tw1-2-10-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms\"\u003e2 ohm (10TW1-2)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS (75–300W recommended)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eMounting depth: 111mm (4.36 inch)\u003c\/li\u003e\n\u003cli\u003eFrontal clearance: 22mm (0.87 inch) with grille\u003c\/li\u003e\n\u003cli\u003eSealed enclosure: from 0.35 cu ft (10 litres)\u003c\/li\u003e\n\u003cli\u003eLinear excursion: 10mm one-way\u003c\/li\u003e\n\u003cli\u003eGrille: steel mesh grille included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eShallow mounting with full bass performance\u003c\/h2\u003e\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 10TW1 combines a shallow mounting depth with genuine excursion capability, operating in enclosures from just 0.35 cu ft (10 litres). The cast alloy frame is designed for extremely tight spaces, including under-seat installs in trucks, two-seat sports cars, and other compact applications.\u003c\/p\u003e\n\n\u003cp\u003eThe patented thin-line architecture uses a \"concentric tube\" structure built into the injection-moulded cone body. This supports the voice coil and a full annular spider, while allowing the motor structure to sit further forward than in conventional designs.\u003c\/p\u003e\n\n\u003cp\u003eThe frame design minimises frontal clearance by recessing the suspension attachment surface, so most forward excursion occurs within the frame's own dimensions. The result is just 22mm (0.87 inch) of frontal clearance required, even with the grille fitted — maximising usable enclosure volume within a given overall depth.\u003c\/p\u003e\n\n\u003cp\u003eDespite being optimised for a much smaller enclosure than any other JL Audio 10-inch subwoofer, the 10TW1 delivers controlled, deep bass rather than the strained sound associated with undersized installs.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth: 111mm (4.36 inch)\u003c\/li\u003e\n\u003cli\u003eNo pole vent: permits mounting close to the rear wall of the enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirement\u003c\/li\u003e\n\u003cli\u003eLong linear excursion: 10mm (0.40 inch) one-way\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713251139850,"sku":"90916","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw1-4-10-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms-47166525145354.jpg?v=1748429713"},{"product_id":"jl-audio-10tw1-2-10-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms","title":"JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10TW1-2 is a 10 inch (250mm) shallow-mount subwoofer from the TW1 series, rated at 300W RMS into 2 ohms, with a mounting depth of just 111mm. Designed for tight installs — under seats, sports cars and compact enclosures — it works in sealed boxes from as little as 0.35 cu ft (10 litres).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 2 ohm version. The TW1 10 inch subwoofer is also available in \u003ca href=\"\/products\/jl-audio-10tw1-4-10-inch-sub-tw1-series-shallow-mount-subwoofer-4-ohm-300w-rms\"\u003e4 ohm (10TW1-4)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS (75–300W recommended)\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eMounting depth: 111mm (4.36 inch)\u003c\/li\u003e\n\u003cli\u003eFrontal clearance: 22mm (0.87 inch) with grille\u003c\/li\u003e\n\u003cli\u003eSealed enclosure: from 0.35 cu ft (10 litres)\u003c\/li\u003e\n\u003cli\u003eLinear excursion: 10mm one-way\u003c\/li\u003e\n\u003cli\u003eGrille: steel mesh grille included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTW1 thin-line subwoofer technology\u003c\/h2\u003e\n\u003cp\u003eBuilt on JL Audio's patented thin-line subwoofer technology, the 10TW1 combines shallow mounting depth with strong excursion capability, operating in enclosures as small as 0.35 cu ft (10 litres). A special cast alloy frame makes it suitable for extremely tight spaces — under-seat installs in trucks, two-seat sports cars and other low-profile applications.\u003c\/p\u003e\n\n\u003cp\u003eThe patented \"concentric tube\" structure is built into the injection-moulded cone body. It supports the voice coil and a full annular spider, while allowing a large motor structure to sit further forward than in conventional designs — compressing the overall architecture without sacrificing performance.\u003c\/p\u003e\n\n\u003cp\u003eA recessed suspension attachment surface means most forward excursion occurs within the frame's own dimensions. This keeps frontal clearance to just 22mm (0.87 inch) — even with the grille fitted — allowing more enclosure volume within a given overall depth.\u003c\/p\u003e\n\n\u003cp\u003eDespite being optimised for a much smaller enclosure than any other JL Audio 10 inch subwoofer, the 10TW1 delivers rich, deep, controlled bass rather than the strained sound of an oversized driver in a cramped box.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eVery shallow mounting depth: 4.36 in (111mm)\u003c\/li\u003e\n\u003cli\u003eNo pole vent — can mount close to the rear wall of the enclosure\u003c\/li\u003e\n\u003cli\u003eExtremely small sealed enclosure volume requirements\u003c\/li\u003e\n\u003cli\u003eLong linear excursion: 0.40 in (10mm) one-way\u003c\/li\u003e\n\u003cli\u003eDMA-optimised motor design\u003c\/li\u003e\n\u003cli\u003ePatented \"concentric tube\" architecture\u003c\/li\u003e\n\u003cli\u003ePatented \"floating cone attach method\" technology\u003c\/li\u003e\n\u003cli\u003eCast alloy frame with flat edges for tight driver grouping\u003c\/li\u003e\n\u003cli\u003eInjection-moulded, mica-filled polypropylene cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included\u003c\/li\u003e\n\u003cli\u003ePrecision-built in the USA at JL Audio's Miramar, Florida factory with global components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713252090122,"sku":"90915","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10tw1-2-10-inch-sub-tw1-series-shallow-mount-subwoofer-2-ohm-300w-rms-47166527471882.jpg?v=1748429706"},{"product_id":"jl-audio-10w7ae-3-w7-series-anniversary-edition-10-inch-sub-subwoofer-750w-rms","title":"JL Audio 10W7AE-3 W7 Series Anniversary Edition 10 Inch Sub Subwoofer 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W7AE-3 is a 10-inch (250 mm) single voice coil subwoofer driver rated at 750W RMS at 3 ohms, part of the W7 Anniversary Edition range from JL Audio.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 750W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 300–750W RMS\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 3 ohms (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 1.25 cu ft (35.4 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 1.5 cu ft (42.5 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 203 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 23 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10W7AE-3: 10th Anniversary Edition W7 10-inch subwoofer (750 W, 3 Ω)\u003c\/h2\u003e\n\u003cp\u003eThe 10W7AE-3 delivers reference-grade sub-bass from a 10-inch driver. Total Car Audio (UK) said of the 10W7: \"This gives an all round performance of such high quality on every level, that bettering it will be very hard to achieve.\" The 10W7 combines exceptional excursion capability for its size with composure under power and accurate tracking of complex bass material.\u003c\/p\u003e\n\u003cp\u003eThe 10W7AE-3 works best with amplifier power in the 300–750W RMS range. It is optimised for a 1.25 cu ft (35.4 l) sealed enclosure or a 1.5 cu ft (42.5 l) ported enclosure. Full enclosure recommendations are in the Specifications tab.\u003c\/p\u003e\n\n\u003ch3\u003eAnniversary Edition\u003c\/h3\u003e\n\u003cp\u003eW7AE subwoofers mark the 10th anniversary of the W7 launch. They are functionally identical to the original W7s but feature the following cosmetic differences:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatin-black powder-coated baskets\u003c\/li\u003e\n\u003cli\u003eBright anodised surround clamp ring\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition cone badge\u003c\/li\u003e\n\u003cli\u003eAnniversary Edition terminal label\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW-Cone\u003c\/h2\u003e\n\u003cp\u003eThe W-Cone is a unit-body cone assembly offering high stiffness with minimal mass. Its shape provides torsional rigidity, which maintains voice coil alignment at the suspension limits.\u003c\/p\u003e\n\n\u003ch2\u003eOverRoll™ Surround\u003c\/h2\u003e\n\u003cp\u003eThis design uses space wasted in conventional speakers to control the W7's massive excursion without sacrificing cone area.\u003c\/p\u003e\n\n\u003ch2\u003eFloating Cone Attach Method (FCAM™)\u003c\/h2\u003e\n\u003cp\u003eConceived by JL Audio, this assembly technique ensures correct surround geometry in the finished speaker for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\n\u003ch2\u003eRadially Cross-Drilled Pole-Piece\u003c\/h2\u003e\n\u003cp\u003eThis venting system directs airflow onto the voice coil former, working with the Elevated Frame cooling technology to remove heat from the voice coil. The result is improved power handling, reduced power compression and more linear performance.\u003c\/p\u003e\n\n\u003ch2\u003eEngineered Lead-Wire System\u003c\/h2\u003e\n\u003cp\u003eThe lead-wire design and attachments are engineered to ensure controlled, quiet lead-wire behaviour under the most extreme excursion demands.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713269686538,"sku":"90925","price":929.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w7ae-3-w7-series-anniversary-edition-10-inch-sub-subwoofer-750w-rms-47166554931466.jpg?v=1748431526"},{"product_id":"jl-audio-10w6v3-d4-w6-series-10-inch-25cm-dual-4-ohm-car-sub-subwoofer-600w-rms","title":"JL Audio 10W6V3-D4 W6 Series 10 Inch 25cm Dual 4 ohm Car Sub Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W6v3-D4 is a 10-inch (250 mm) dual 4-ohm subwoofer from the W6 series, rated at 600W RMS. It is designed to deliver high-quality sub-bass from a compact enclosure, using motor and suspension technologies shared with JL Audio's flagship W7AE subwoofers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10W6v3-D4. The W6v3 is also available as the \u003ca href=\"\/products\/jl-audio-12w6v3-d4-w6-series-12-inch-30cm-dual-4-ohm-car-sub-subwoofer-600w-rms\"\u003e12W6v3-D4\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 600W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 200–600W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm (dual voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 0.55 cu ft (15.6 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 0.75 cu ft (21.2 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 6.89 in \/ 175 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.02 in \/ 229 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.75 in \/ 19 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW6v3 10-inch subwoofer — 600W, dual 4 Ω voice coils\u003c\/h2\u003e\n\u003cp\u003eThe 10W6v3 is designed for the highest quality sub-bass in compact enclosure applications. It shares motor linearity and suspension technologies with JL Audio's flagship W7AE subwoofers, combined with an efficient cooling circuit to reduce distortion and maintain dynamic balance.\u003c\/p\u003e\n\u003cp\u003eBest used with 200–600W RMS of amplifier power. Optimised for a sealed enclosure of 0.55 cu ft (15.6 l) or a ported enclosure of 0.75 cu ft (21.2 l). Dual 4 Ω voice coils allow the 10W6v3-D4 to be wired as a 2 Ω or 8 Ω driver. For a step-down option, see the \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003eJL Audio 8W3v3-4\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eDynamic Motor Analysis — DMA optimised motor\u003c\/h2\u003e\n\u003cp\u003eJL Audio's proprietary Dynamic Motor Analysis (DMA) system uses FEA-based modelling, first developed in 1997, to address motor linearity scientifically. The result is reduced distortion and accurately reproduced transients — tight, clean, articulate bass.\u003c\/p\u003e\n\n\u003ch2\u003eElevated Frame Cooling\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design channels cool air through slots directly above the top-plate to the voice coil. This improves power handling and minimises dynamic parameter shifts and power compression.\u003c\/p\u003e\n\n\u003ch2\u003eFloating Cone Attach Method — FCAM™\u003c\/h2\u003e\n\u003cp\u003eFCAM is a JL Audio assembly technique that ensures correct surround geometry in the finished driver, improving excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\n\u003ch2\u003ePole-Vent Airflow Control — PVAC\u003c\/h2\u003e\n\u003cp\u003eIn high-powered subwoofers, thermal management is essential. PVAC controls airflow through the pole vent to assist voice coil cooling under sustained high-power use.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713271619850,"sku":"90924","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w6v3-d4-w6-series-10-inch-25cm-dual-4-ohm-car-sub-subwoofer-600w-rms-47166558241034.jpg?v=1748431512"},{"product_id":"jl-audio-10w3v3-4-10-25cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms","title":"JL Audio 10W3v3-4 10\" 25cm W3 Series Car Sub Subwoofer Driver 4ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W3v3-4 is a 10\" (250 mm) W3 Series car subwoofer driver with a single 4 ohm voice coil and 500W RMS power handling. It is designed for medium-power systems in compact sealed or ported enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 4 ohm version. The W3 Series 10\" subwoofer is also available in \u003ca href=\"\/products\/jl-audio-10w3v3-2-10-25cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms\"\u003e2 ohm (10W3v3-2)\u003c\/a\u003e — choose the impedance that suits your amplifier. The W3 Series is also available as an \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8\" (20 cm) 4 ohm driver (8W3V3-4)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 0.625 cu ft (17.7 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 1.125 cu ft (31.9 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 5.93 in \/ 151 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.0625 in \/ 230 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.550 in \/ 14.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW3v3 10-inch subwoofer driver\u003c\/h2\u003e\n\u003cp\u003eThe 10W3v3-4 balances power handling, enclosure requirements and excursion for medium-power applications. JL Audio applies several proprietary technologies and assembly techniques to enhance linearity and reliability. It is optimised for a compact 0.625 cu ft (17.7 l) sealed enclosure or a 1.125 cu ft (31.9 l) ported enclosure.\u003c\/p\u003e\n\n\u003ch2\u003eDynamic Motor Analysis — DMA Optimised Motor\u003c\/h2\u003e\n\u003cp\u003eJL Audio's Dynamic Motor Analysis (DMA) is an FEA-based modelling system first developed in 1997 and refined to address speaker motor linearity. The result is reduced distortion and accurately reproduced transients — tight, clean, articulate bass.\u003c\/p\u003e\n\n\u003ch2\u003eElevated Frame Cooling\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design channels cool air through slots directly above the top-plate to the voice coil. This improves power handling and minimises dynamic parameter shifts and power compression.\u003c\/p\u003e\n\n\u003ch2\u003eFloating Cone Attach Method — FCAM™\u003c\/h2\u003e\n\u003cp\u003eThis JL Audio assembly technique ensures correct surround geometry in the finished driver for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\n\u003ch2\u003eVented Reinforcement Collar — VRC®\u003c\/h2\u003e\n\u003cp\u003eThe Vented Reinforcement Collar improves rigidity and stability at the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for better thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713278337290,"sku":"90923","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w3v3-4-10-25cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms-47166565810442.jpg?v=1748429020"},{"product_id":"jl-audio-10w3v3-2-10-25cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms","title":"JL Audio 10W3v3-2 10\" 25cm W3 Series Car Sub Subwoofer Driver 2ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W3v3-2 is a 10\" (250 mm) W3 Series car subwoofer driver with a single 2 ohm voice coil and 500W RMS power handling. It is designed for medium-power systems in compact sealed or ported enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 2 ohm version. The W3 Series 10\" subwoofer is also available as the \u003ca href=\"\/products\/jl-audio-10w3v3-4-10-25cm-w3-series-car-sub-subwoofer-driver-4ohm-500w-rms\"\u003e10W3v3-4 with a single 4 ohm voice coil\u003c\/a\u003e — choose the impedance that suits your amplifier. The W3 Series is also available in an \u003ca href=\"\/products\/jl-audio-8w3v3-4-8-20cm-w3-series-car-sub-subwoofer-driver-4ohm-250w-rms-1\"\u003e8\" (20 cm) version, the 8W3V3-4\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–500W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 0.625 cu ft (17.7 litres)\u003c\/li\u003e\n\u003cli\u003eRecommended ported enclosure: 1.125 cu ft (31.9 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 5.93 in \/ 151 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.0625 in \/ 230 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.550 in \/ 14.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW3v3 10-inch subwoofer (500W, 2 ohm)\u003c\/h2\u003e\n\u003cp\u003eThe 10W3v3-2 balances power handling, enclosure requirements and excursion to deliver strong performance in medium-power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are used to enhance linearity and reliability.\u003c\/p\u003e\n\n\u003ch2\u003eDynamic Motor Analysis – DMA optimised motor\u003c\/h2\u003e\n\u003cp\u003eJL Audio's Dynamic Motor Analysis (DMA) is a suite of FEA-based modelling systems first developed in 1997 and refined over the years to address speaker motor linearity. The result is reduced distortion and accurately reproduced transients — tight, clean, articulate bass.\u003c\/p\u003e\n\n\u003ch2\u003eElevated Frame Cooling\u003c\/h2\u003e\n\u003cp\u003eJL Audio's patented Elevated Frame Cooling design directs cool air through slots above the top-plate to the voice coil. This improves power handling and reduces dynamic parameter shifts and power compression for better sound quality.\u003c\/p\u003e\n\n\u003ch2\u003eFloating Cone Attach Method – FCAM™\u003c\/h2\u003e\n\u003cp\u003eThis JL Audio assembly technique ensures correct surround geometry in the finished driver for better excursion control and dynamic voice coil alignment.\u003c\/p\u003e\n\n\u003ch2\u003eVented Reinforcement Collar\u003c\/h2\u003e\n\u003cp\u003eThe JL Audio Vented Reinforcement Collar (VRC®) improves rigidity and stability at the cone\/spider\/voice coil junction and directs airflow over the voice coil windings for improved thermal performance.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713280401674,"sku":"90922","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w3v3-2-10-25cm-w3-series-car-sub-subwoofer-driver-2ohm-500w-rms-47166566793482.jpg?v=1748429019"},{"product_id":"jl-audio-10w1v3-4-10-25cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 10W1v3-4 10\" 25cm W1 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W1v3-4 is a 10-inch (250 mm) W1 Series car subwoofer driver with a single 4 ohm voice coil and 300W RMS power handling. It belongs to JL Audio's W1v3 range and is designed for shallow installations where amplifier power is moderate.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10-inch 4 ohm W1v3. The W1v3 range is also available in an \u003ca href=\"\/products\/jl-audio-8w1v3-4-8-20cm-w1-series-car-sub-subwoofer-driver-4ohm-150w-rms\"\u003e8-inch W1v3-4\u003c\/a\u003e, a \u003ca href=\"\/products\/jl-audio-12w1v3-4-12-30cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms\"\u003e12-inch W1v3-4\u003c\/a\u003e, and a \u003ca href=\"\/products\/jl-audio-12w1v3-2-12-30cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms\"\u003e12-inch W1v3-2\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250 mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm (single voice coil)\u003c\/li\u003e\n\u003cli\u003eRecommended sealed enclosure: 0.55 cu ft (15.57 litres)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 4.6 in \/ 117 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 9.0625 in \/ 230 mm\u003c\/li\u003e\n\u003cli\u003eLinear excursion (Xmax, one way): 0.45 in \/ 11 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10W1v3-4: shallow-mount 10-inch subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe 10W1v3-4 is built for installations where space is tight and amplifier power is moderate. Its 117 mm mounting depth and compact motor structure let it fit in locations that a typical 10-inch driver cannot. With no pole vent, the rear of the motor can be placed directly against an enclosure boundary. Despite its compact dimensions, it delivers strong sub-bass extension and excursion linearity, supported by several of JL Audio's proprietary technologies.\u003c\/p\u003e\n\u003cp\u003eBest used with 75–300W RMS of amplifier power, optimised for a sealed enclosure of 0.55 cu ft (15.57 litres).\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713287643402,"sku":"90921","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w1v3-4-10-25cm-w1-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166574362890.jpg?v=1748429014"},{"product_id":"jl-audio-10w1v3-2-10-25cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms","title":"JL Audio 10W1v3-2 10\" 25cm W1 Series Car Sub Subwoofer Driver 2ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W1v3-2 is a 10\" (250mm) W1 Series car subwoofer driver rated at 300W RMS with a 2-ohm impedance. It features a shallow 117mm mounting depth and is optimised for compact sealed enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch (250mm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS (75–300W recommended)\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms\u003c\/li\u003e\n\u003cli\u003eMounting depth: 117mm (4.6 inch)\u003c\/li\u003e\n\u003cli\u003eSealed enclosure volume: 0.55 cu ft (15.57 litres)\u003c\/li\u003e\n\u003cli\u003eLinear excursion: 11mm one-way\u003c\/li\u003e\n\u003cli\u003ePole vent: none — motor structure can sit directly against an enclosure wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eW1v3 10-inch Subwoofer (300W, 2Ω)\u003c\/h2\u003e\n\u003cp\u003eThe 10W1v3-2 is an ideal choice where space is tight and amplifier power is moderate. Its shallow 4.6 in. (117mm) mounting depth and compact motor structure allow it to fit in many locations where a standard 10-inch driver will not. With no pole vent, the rear of the motor can be placed directly against an enclosure boundary. Strong excursion capability and linearity deliver extended sub-bass reproduction. Several JL Audio proprietary technologies are used to enhance performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThis driver is best matched with amplifier power in the 75W–300W range and is optimised to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713288986890,"sku":"90920","price":249.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w1v3-2-10-25cm-w1-series-car-sub-subwoofer-driver-2ohm-300w-rms-47166574985482.jpg?v=1748428998"},{"product_id":"jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms","title":"JL Audio 10W0v3-4 10\" 25cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio 10W0v3-4 is a 10\" (250 mm) 4-ohm subwoofer driver rated at 300 W RMS, from JL Audio's W0v3 series. It is designed for compact sealed or ported enclosures and suits first-fit or upgraded bass systems running 75–300 W of amplifier power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 in \/ 250 mm\u003c\/li\u003e\n\u003cli\u003eContinuous power handling (RMS): 300 W\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300 W RMS\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eVoice coil diameter: 2 in\u003c\/li\u003e\n\u003cli\u003eMounting depth: 124 mm\u003c\/li\u003e\n\u003cli\u003eMounting hole diameter: 230 mm\u003c\/li\u003e\n\u003cli\u003eOptimum enclosure: 18.4 l sealed or 31.9 l ported\u003c\/li\u003e\n\u003cli\u003eXmax (one-way): 11.4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e10W0v3-4: 10-inch (250 mm) subwoofer driver, 4 ohm\u003c\/h2\u003e\n\u003cp\u003eThe 10W0v3 is a rugged, reliable subwoofer built for consistent real-world performance. It features a 2 in voice coil and JL Audio's patented Elevated Frame Cooling design for improved power handling and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eBest used with 75–300 W of amplifier power, it is optimised for a compact 0.65 cu. ft. (18.4 l) sealed enclosure or a 1.125 cu. ft. (31.9 l) ported enclosure. If you need a remote bass control for your amplifier, the \u003ca href=\"\/products\/jl-audio-rbc-1-remote-bass-level-control-for-jd-jx-mx-rd-series-amps-amplifiers\"\u003eJL Audio RBC-1\u003c\/a\u003e is a compatible option for JD, JX, MX and RD series amps.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713291772170,"sku":"90919","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms-47166576656650.jpg?v=1748428991"},{"product_id":"jl-audio-cls110rg-w7ae-subwoofer-10-w7-prowedge-sealed-sub-enclosure-750w-rms","title":"JL Audio CLS110RG-W7AE Subwoofer 10\" W7 ProWedge Sealed Sub Enclosure 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CLS110RG-W7AE is a sealed ProWedge enclosed subwoofer system from JL Audio's W7 range, loaded with a single 10\" 10W7AE-3 driver rated at 750W RMS at 3 ohms. It arrives wired and ready to connect — built for listeners who want deep, detailed sub-bass from a compact sealed enclosure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10\" 10W7AE-3\u003c\/li\u003e\n\u003cli\u003eEnclosure type: sealed ProWedge, rear-firing\u003c\/li\u003e\n\u003cli\u003ePower handling: 750W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 300–750W\u003c\/li\u003e\n\u003cli\u003eImpedance: 3 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: three solid aluminium bars\u003c\/li\u003e\n\u003cli\u003eDimensions: 451 mm W x 371 mm H x 422 mm D (292 mm top depth)\u003c\/li\u003e\n\u003cli\u003eWeight: 27.77 kg\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCLS110RG-W7AE Single 10W7AE ProWedge Enclosed Subwoofer System, Sealed, Black Carpet (750W, 3Ω)\u003c\/h2\u003e\n\u003cp\u003eThe sealed ProWedge enclosure has been engineered to the optimum sealed alignment for the 10W7AE-3 driver and fine-tuned through extensive real-world listening. The result is extension, impact, detail and smooth response at any listening level.\u003c\/p\u003e\n\u003cp\u003eThe system ships wired and loaded, ready to connect via the five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eThe angled-back design allows the enclosure to sit tight against the back of a vehicle's rear seat, saving boot space.\u003c\/p\u003e\n\u003cp\u003eFinish: black high-grade automotive carpet with a gloss-black laminated decorative front baffle trim. Three solid aluminium bars provide stylish, rugged woofer protection.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-cut high-grade MDF.\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 300–750W\u003c\/p\u003e\n\u003cp\u003eNominal impedance: 3Ω\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713304715530,"sku":"90982","price":1269.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cls110rg-w7ae-subwoofer-10-w7-prowedge-sealed-sub-enclosure-750w-rms-47166588944650.jpg?v=1748428934"},{"product_id":"jl-audio-cs110lg-tw3-subwoofer-10-tw3-powerwedge-sealed-sub-enclosure-400w-rms","title":"JL Audio CS110LG-TW3 Subwoofer 10\" TW3 PowerWedge Sealed Sub Enclosure 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CS110LG-TW3 is a sealed, low-profile PowerWedge enclosed subwoofer system from JL Audio's TW3 range, housing a single 10-inch 10TW3-D4 driver rated at 400W RMS at 2 ohms. At just 114 mm deep, it fits where a standard subwoofer enclosure cannot.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10-inch 10TW3-D4\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, low-profile PowerWedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 100–400W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: black steel mesh\u003c\/li\u003e\n\u003cli\u003eDimensions: 527 mm W x 357 mm H x 114 mm D\u003c\/li\u003e\n\u003cli\u003eWeight: 9.6 kg\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCS110LG-TW3 Single 10TW3 PowerWedge Enclosed Subwoofer System, Sealed, Black Carpet (400W, 2Ω)\u003c\/h2\u003e\n\u003cp\u003eThis low-profile PowerWedge subwoofer system harnesses the 10TW3 driver to deliver genuine sub-bass from an enclosure only 4.5 in. (114 mm) deep.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is engineered to the optimum sealed alignment for the 10TW3-D4 and fine-tuned through extensive real-world listening.\u003c\/p\u003e\n\u003cp\u003eThe system ships wired, loaded, and ready to connect via the five-way binding post terminal.\u003c\/p\u003e\n\u003cp\u003eFinish: black, high-grade automotive carpet with \"JL AUDIO\" embroidered in silver on the front baffle. A steel mesh grille is included to protect the driver.\u003c\/p\u003e\n\u003cp\u003eConstruction: CNC-cut high-grade MDF.\u003c\/p\u003e\n\u003cp\u003eRecommended amplifier power: 100–400W. Nominal impedance: 2Ω.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713306714378,"sku":"90993","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs110lg-tw3-subwoofer-10-tw3-powerwedge-sealed-sub-enclosure-400w-rms-47166594023690.jpg?v=1748428909"},{"product_id":"jl-audio-cs110lg-tw1-2-subwoofer-10-tw1-powerwedge-sealed-sub-enclosure-300w","title":"JL Audio CS110LG-TW1-2 Subwoofer 10\" TW1 PowerWedge Sealed Sub Enclosure 300w","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CS110LG-TW1-2 is a sealed, low-profile PowerWedge subwoofer enclosure from JL Audio's TW1 range, housing a single 10 inch 10TW1-2 driver rated at 300W RMS at 2 ohms. At just 141 mm deep, it is built for vehicles where boot space is limited.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 10 inch version. The TW1 PowerWedge is also available in \u003ca href=\"\/products\/jl-audio-cs112lg-tw1-2-subwoofer-12-tw1-powerwedge-sealed-sub-enclosure-300w\"\u003e12 inch (CS112LG-TW1-2)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: single 10 inch 10TW1-2\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, low-profile PowerWedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: black steel mesh\u003c\/li\u003e\n\u003cli\u003eDimensions: 381 mm W x 298 mm H x 141 mm D\u003c\/li\u003e\n\u003cli\u003eWeight: 7.90 kg\u003c\/li\u003e\n\u003cli\u003eTerminal: five-way binding post\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCS110LG-TW1-2 Single 10TW1 PowerWedge Enclosed Subwoofer System, Sealed, Black Carpet (300 W, 2 Ω)\u003c\/h2\u003e\n\u003cp\u003eA compact, ready-to-install subwoofer system built around JL Audio's TW1 driver, designed for vehicles where space is limited but bass quality matters.\u003c\/p\u003e\n\u003cp\u003eThe low-profile PowerWedge™ enclosure is only 5.56 in. (141 mm) deep, using the TW1 driver's small-box requirements to deliver strong sub-bass without dominating your boot space. The enclosure is engineered to the optimum sealed alignment for the 10TW1 and refined through real-world listening tests.\u003c\/p\u003e\n\u003cp\u003eIt arrives wired, loaded and ready to connect via the five-way binding post terminal — no additional assembly required.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish: black high-grade automotive carpet with \"JL AUDIO\" embroidered in silver\u003c\/li\u003e\n\u003cli\u003eSteel mesh grille included for driver protection\u003c\/li\u003e\n\u003cli\u003eConstruction: CNC-cut high-grade MDF\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 75–300W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 2 Ω\u003c\/li\u003e\n\u003cli\u003eEnclosure depth: 5.56 in. (141 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713308057866,"sku":"90992","price":429.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cs110lg-tw1-2-subwoofer-10-tw1-powerwedge-sealed-sub-enclosure-300w-47166596743434.jpg?v=1748428900"},{"product_id":"jl-audio-cp210-w0v3-10-25cm-dual-10w0v3-basswedge-ported-subwoofer-600w-rms","title":"JL Audio CP210-W0v3 10\" 25cm Dual 10W0v3 BassWedge Ported Subwoofer 600w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe JL Audio CP210-W0v3 is a ready-to-install BassWedge enclosed subwoofer system featuring two 10W0v3-4 10\" drivers in a slot-ported MDF enclosure, rated at 600W RMS at 2 ohms. It is part of JL Audio's W0v3 range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the dual 10\" CP210-W0v3. The BassWedge range also includes the \u003ca href=\"\/products\/jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms\"\u003eJL Audio 10W0v3-4 driver\u003c\/a\u003e if you prefer to build your own enclosure.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrivers: two 10\" (25cm) 10W0v3-4\u003c\/li\u003e\n\u003cli\u003eEnclosure: slot-ported BassWedge\u003c\/li\u003e\n\u003cli\u003ePower handling: 600W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–600W\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohm\u003c\/li\u003e\n\u003cli\u003eGrille: not included\u003c\/li\u003e\n\u003cli\u003eDimensions: 752mm W x 350mm H x 441mm D (356mm top depth)\u003c\/li\u003e\n\u003cli\u003eWeight: 23kg\u003c\/li\u003e\n\u003cli\u003eTerminal: push-button\u003c\/li\u003e\n\u003cli\u003eFinish: dark grey automotive carpet, MDF construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTwo \u003ca href=\"\/products\/jl-audio-10w0v3-4-10-25cm-w0-series-car-sub-subwoofer-driver-4ohm-300w-rms\"\u003eJL Audio 10W0v3-4\u003c\/a\u003e subwoofers are loaded into a single ready-to-install ported enclosure, wired and connected via a push-button terminal — no extra assembly required.\u003c\/p\u003e\n\u003ch2\u003eCP210-W0v3 Dual 10W0v3 BassWedge Enclosed Subwoofer System, Ported, Dark Gray Carpet (600W, 2Ω)\u003c\/h2\u003e\n\u003cp\u003eThe slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers, improving bass extension and keeping the response smooth. The flared port mouth reduces air-flow noise at volume.\u003c\/p\u003e\n\u003cp\u003eThe BassWedge shape features extended sides, allowing the woofers to fire outward or straight down off the vehicle floor. It works in both forward and rear-firing positions, giving flexibility when fitting to your boot.\u003c\/p\u003e\n\u003ch2\u003eFinish \u0026amp; Construction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDark grey high-grade automotive carpet\u003c\/li\u003e\n\u003cli\u003e\"JL AUDIO\" embroidery on the top edge\u003c\/li\u003e\n\u003cli\u003e\"Slot-Ported BassWedge™\" embroidered on the port mouth\u003c\/li\u003e\n\u003cli\u003eMDF construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":45713308320010,"sku":"90990","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/jl-audio-subwoofer-jl-audio-cp210-w0v3-10-25cm-dual-10w0v3-basswedge-ported-subwoofer-600w-rms-47166598054154.jpg?v=1748428920"},{"product_id":"focal-p25fe-sub-flax-evo-series-10-inch-4-ohm-component-subwoofer-300w-rms","title":"Focal P25FE Sub Flax Evo Series 10 Inch 4 Ohm Component Subwoofer 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal P25FE is a 10 inch, 4-ohm component subwoofer from the Flax Evo Series, rated at 300W RMS (600W peak). It features a glass fibre\/flax\/glass fibre sandwich cone and suits both compact sealed and ported enclosures.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeed a shallower driver? The \u003ca href=\"\/products\/focal-p25fse-sub-flax-evo-series-slim-shallow-10-inch-4-ohm-subwoofer-280w-rms\"\u003eFocal P 25 FSE slim 10 inch subwoofer\u003c\/a\u003e is designed for compact sealed boxes.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" single voice coil\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS, 600W peak\u003c\/li\u003e\n\u003cli\u003eSensitivity: 85dB (2.83V)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 33Hz – 500Hz\u003c\/li\u003e\n\u003cli\u003eTop-mount depth: 5½\"\u003c\/li\u003e\n\u003cli\u003eSealed box volume: 0.35–0.88 cu ft\u003c\/li\u003e\n\u003cli\u003ePorted box volume: 0.88–1.23 cu ft\u003c\/li\u003e\n\u003cli\u003eGrille not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFocal P 25 FE\u003c\/h2\u003e\n\u003cp\u003eFocal spent five years developing the Flax Evo cone material — a layer of flax fibres sandwiched between two layers of glass fibre. The result is a lightweight, rigid cone that combines the warmth of natural fibre with precise, accurate sound reproduction.\u003c\/p\u003e\n\u003ch2\u003eSmall size, big sound\u003c\/h2\u003e\n\u003cp\u003eBuilt at Focal's workshop in France, the P 25 FE delivers strong bass performance from a compact driver, handling up to 300W RMS. It works equally well in sealed or ported enclosures, making it a practical choice for smaller vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10\" 4-ohm component subwoofer\u003c\/li\u003e\n\u003cli\u003eGlass fibre\/flax\/glass fibre laminate cone\u003c\/li\u003e\n\u003cli\u003eRubber surround\u003c\/li\u003e\n\u003cli\u003e300W RMS, 600W peak power handling\u003c\/li\u003e\n\u003cli\u003eFrequency response: 33–500Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 85dB\u003c\/li\u003e\n\u003cli\u003eSealed box volume: 0.35–0.88 cubic feet\u003c\/li\u003e\n\u003cli\u003ePorted box volume: 0.88–1.23 cubic feet\u003c\/li\u003e\n\u003cli\u003eTop-mount depth: 5½\"\u003c\/li\u003e\n\u003cli\u003eGrille not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45713418223882,"sku":"90551","price":249.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-p25fe-sub-flax-evo-series-10-inch-4-ohm-component-subwoofer-300w-rms-47166694654218.jpg?v=1748432911"},{"product_id":"focal-p25fse-sub-flax-evo-series-slim-shallow-10-inch-4-ohm-subwoofer-280w-rms","title":"Focal P25FSE Sub Flax Evo Series Slim Shallow 10 Inch 4 Ohm Subwoofer 280w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal P25FSE is a shallow-mount 10 inch, 4 ohm subwoofer from the Flax Evo Series, rated at 280W RMS. Its 3\" (76mm) mounting depth makes it suitable for compact sealed enclosures in smaller vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf depth is not a constraint, the \u003ca href=\"\/products\/focal-p25fe-sub-flax-evo-series-10-inch-4-ohm-component-subwoofer-300w-rms\"\u003eFocal P 25 FE 10 inch subwoofer\u003c\/a\u003e handles 300W RMS and works in sealed or ported boxes.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" single voice coil, shallow mount\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling: 280W RMS, 560W peak\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87dB (2.83V\/1m)\u003c\/li\u003e\n\u003cli\u003eMounting depth: 3\" (76mm)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 41Hz–400Hz\u003c\/li\u003e\n\u003cli\u003eSealed box volume: 0.42–0.64 cu ft\u003c\/li\u003e\n\u003cli\u003eCone: glass fibre\/flax\/glass fibre laminate with rubber surround\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFocal P 25 FSE\u003c\/h2\u003e\n\u003cp\u003eFocal spent five years developing the Flax Evo cone material — a layer of flax fibres sandwiched between two layers of glass fibre. The result combines the warmth of natural fibre with the rigidity and accuracy of a composite cone.\u003c\/p\u003e\n\u003ch2\u003eSmall size, big sound\u003c\/h2\u003e\n\u003cp\u003eBuilt at Focal's workshop in France, the P25FSE delivers up to 280W RMS from a shallow 3\" (76mm) depth, allowing it to fit a compact sealed enclosure where a standard subwoofer won't.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10\" 4-ohm component subwoofer\u003c\/li\u003e\n\u003cli\u003eShallow-mount design\u003c\/li\u003e\n\u003cli\u003eGlass fibre\/flax\/glass fibre laminate cone with rubber surround\u003c\/li\u003e\n\u003cli\u003e280W RMS (560W peak)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 41–400Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87dB\u003c\/li\u003e\n\u003cli\u003eMounting depth: 3\" (76mm)\u003c\/li\u003e\n\u003cli\u003eSealed box volume: 0.42–0.64 cubic feet\u003c\/li\u003e\n\u003cli\u003eGrille not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45713421959434,"sku":"90552","price":249.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-p25fse-sub-flax-evo-series-slim-shallow-10-inch-4-ohm-subwoofer-280w-rms-47166698946826.jpg?v=1748432948"},{"product_id":"pioneer-ts-wx1010la-powered-active-subwoofer-shallow-sub-bass-remote-300w-rms","title":"Pioneer TS-WX1010LA Powered Active Subwoofer Shallow Sub Bass Remote 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-WX1010LA is a shallow-mount 25 cm (10\") powered subwoofer with a built-in amplifier rated at 300 W RMS (1200 W max). It belongs to Pioneer's active subwoofer range and is designed for drivers who want tight, controlled bass in a compact enclosure that fits where standard subwoofers won't.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDriver size: 25 cm (10\")\u003c\/li\u003e\n\u003cli\u003ePower: 300 W RMS \/ 1200 W max\u003c\/li\u003e\n\u003cli\u003eType: Shallow sealed enclosure with built-in amplifier\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 3.4 kHz\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 50 Hz - 200 Hz (-12 dB\/oct)\u003c\/li\u003e\n\u003cli\u003eControl: Bass remote included\u003c\/li\u003e\n\u003cli\u003eDimensions: 533 x 300 x 150 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 7.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePioneer TS-WX1010LA overview\u003c\/h2\u003e\n\u003cp\u003eA compact, shallow-mount powered subwoofer with a 25 cm driver in a sealed enclosure. The sealed design controls internal air pressure for tight, accurate bass. A bass remote and all cables are included for straightforward installation.\u003c\/p\u003e\n\u003cp\u003eIf you need a larger active subwoofer, Pioneer also offer the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003eTS-WX300A, a 12\" powered subwoofer with 350 W RMS\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e300 W RMS \/ 1200 W max power output\u003c\/li\u003e\n\u003cli\u003e25 cm (10 inch) woofer\u003c\/li\u003e\n\u003cli\u003eShallow-mount sealed enclosure\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifier\u003c\/li\u003e\n\u003cli\u003eBass remote control included\u003c\/li\u003e\n\u003cli\u003eCables included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713444110602,"sku":"91416","price":209.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-wx1010la-powered-active-subwoofer-shallow-sub-bass-remote-300w-rms-47166724243722.jpg?v=1748432884"},{"product_id":"kicker-45tl7r102-sub-10-inch-l7r-vented-truck-subwoofer-enclosure-500w-rms","title":"Kicker 45TL7R102 Sub 10 Inch L7R Vented Truck Subwoofer Enclosure 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 45TL7R102 is a vented truck subwoofer enclosure from Kicker's Solo-Baric L7R range, supplied with a 10-inch square L7R driver fitted and ready to go, rated at 500W RMS into a single 2 ohm terminal. Its shallow profile is designed to fit under or behind truck seats.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor a car boot installation, the same L7R 10-inch driver is available in the front-ported \u003ca href=\"\/products\/kicker-45vl7r102-sub-10-inch-l7r-ported-loaded-subwoofer-enclosure-500w-rms\"\u003eKicker 45VL7R102\u003c\/a\u003e with an angled back.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: Solo-Baric L7R 10\" 2 ohm, included\u003c\/li\u003e\n\u003cli\u003eEnclosure: vented truck box, custom engineered port\u003c\/li\u003e\n\u003cli\u003eImpedance: single 2 ohm terminal\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS, 1000W peak\u003c\/li\u003e\n\u003cli\u003eSensitivity: 88 dB 1W\/1m\u003c\/li\u003e\n\u003cli\u003eDimensions: 54.6 cm W x 38.1 cm H x 16.4 cm top depth \/ 25.4 cm bottom depth\u003c\/li\u003e\n\u003cli\u003eConstruction: reinforced MDF, heavy internal bracing, black carpet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eL7R 10\" vented truck enclosure — 2 ohm\u003c\/h2\u003e\n\u003ch2\u003e45TL7R102\u003c\/h2\u003e\n\u003cp\u003eA complete, ready-to-fit bass solution designed to sit under or behind truck seats without the cost of a custom build.\u003c\/p\u003e\n\u003cp\u003eThe L7R 10-inch subwoofer is included and pre-fitted. Kicker's square driver design uses patented ribbed corners, a UniPlate solid pole piece and backplate, and an injection-moulded SoloKon cone bonded to a vented back brace. This gives up to 20% more cone area than a round driver of the same nominal size, moving more air for greater bass output. The enclosure uses reinforced MDF with heavy internal bracing, rounded corners and thick black carpet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine L7R subwoofer included\u003c\/li\u003e\n\u003cli\u003eCustom engineered port design for maximum bass output\u003c\/li\u003e\n\u003cli\u003eHeavy internal bracing for long-term durability\u003c\/li\u003e\n\u003cli\u003eSingle 2 ohm terminal for straightforward installation\u003c\/li\u003e\n\u003cli\u003eEasy to install and wire\u003c\/li\u003e\n\u003cli\u003eThick black carpeting to resist bumps and scrapes\u003c\/li\u003e\n\u003cli\u003eAesthetically pleasing rounded corners\u003c\/li\u003e\n\u003cli\u003eEmbroidered Kicker logo\u003c\/li\u003e\n\u003cli\u003eThick MDF construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRated at 500W RMS. Kicker recommend pairing this enclosure with a KX series amplifier for best results.\u003c\/p\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45713455874314,"sku":"91071","price":319.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-45tl7r102-sub-10-inch-l7r-vented-truck-subwoofer-enclosure-500w-rms-47166746820874.jpg?v=1748432723"},{"product_id":"pioneer-ts-a250d4-sub-10-25cm-dual-voice-coil-subwoofer-400w-rms","title":"Pioneer TS-A250D4 Sub 10\" 25cm Dual Voice Coil Subwoofer 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-A250D4 is a 10-inch (25 cm) dual voice coil subwoofer from Pioneer's A-series, rated at 400W RMS continuous and 1300W max, with dual 4-ohm coils.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 25 cm (10 inch)\u003c\/li\u003e\n\u003cli\u003eType: dual voice coil (D4)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms per voice coil\u003c\/li\u003e\n\u003cli\u003ePower handling: 400W continuous \/ 1300W max\u003c\/li\u003e\n\u003cli\u003eCone: IMPP™ (injection moulded polypropylene)\u003c\/li\u003e\n\u003cli\u003eTerminals: push type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTS-A250D4 25 cm 4Ω enclosure-type dual voice coil subwoofer (1300W)\u003c\/h2\u003e\n\n\u003ch3\u003eUpgrade your sound with powerful bass\u003c\/h3\u003e\n\u003cp\u003ePioneer's A-series subwoofers are designed to complement its A-series speakers, giving you a straightforward bass upgrade for your car's sound system.\u003c\/p\u003e\n\u003cp\u003eThe A-series subwoofers combine high-quality materials and technology to improve bass response. When matched with Pioneer's GM-A series amplifiers, you get powerful, solid bass at any volume level.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding midbass response from the Injection Moulded Polypropylene (IMPP™) cone\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713457742090,"sku":"91387","price":67.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-a250d4-sub-10-25cm-dual-voice-coil-subwoofer-400w-rms-47166751310090.jpg?v=1748432720"},{"product_id":"kicker-hideaway-51hs10-sub-10-compact-powered-active-underseat-subwoofer-180w-rms","title":"Kicker Hideaway 51HS10 Sub 10\" Compact Powered Active Underseat Subwoofer 180w","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker Hideaway 51HS10 is a compact, powered 10-inch underseat subwoofer with a built-in 180W RMS amplifier in an all-aluminium frame. Standing just 8.1 cm tall, it is designed for tight-space installs and works with factory or aftermarket head units without a line output converter. It is part of Kicker's Hideaway range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 10-inch (25 cm), powered\u003c\/li\u003e\n\u003cli\u003eAmplifier power: 180W RMS\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 to 120 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover: 12dB\/octave low-pass 50 to 120 Hz; 24dB\/octave high-pass at 25 Hz\u003c\/li\u003e\n\u003cli\u003eInputs: low level 250mV to 10V, high level 1V to 40V\u003c\/li\u003e\n\u003cli\u003eKickEQ bass boost: variable to +6dB at 40 Hz; phase switch 0\/180 degrees\u003c\/li\u003e\n\u003cli\u003eRemote bass control: included\u003c\/li\u003e\n\u003cli\u003eDimensions: D 35.6 cm x W 24.9 cm x H 8.1 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.17 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHideaway 51HS10\u003c\/h2\u003e\n\u003cp\u003eThe Hideaway 51HS10 delivers strong low-frequency output from a tough, all-aluminium enclosure measuring just 8.1 cm tall — built for underseat or other space-restricted installs.\u003c\/p\u003e\n\n\u003ch3\u003eFIT Plus\u003c\/h3\u003e\n\u003cp\u003eKicker's FIT+™ (Fail-safe Integration Technology PLUS) accepts input signals from 0.25V up to 40V (400 watts at 4Ω) and is fully compatible with vehicles using start\/stop systems. The HS10 works with almost any vehicle without the added cost of a line output converter.\u003c\/p\u003e\n\n\u003ch3\u003eRemote bass control\u003c\/h3\u003e\n\u003cp\u003eThe included remote control lets you adjust bass level independently of radio volume, giving you the right bass balance at any listening level.\u003c\/p\u003e\n\n\u003ch3\u003eFully loaded\u003c\/h3\u003e\n\u003cp\u003eThe Hideaway includes an adjustable low-pass crossover, variable +6dB bass boost at 40 Hz, a phase switch, and two auto turn-on options: DC-offset or signal sensing.\u003c\/p\u003e\n\n\u003ch3\u003eCompact fit\u003c\/h3\u003e\n\u003cp\u003eJust 2 mm taller than the HS8, the HS10 steps up power and output in the same slim, all-aluminium form factor.\u003c\/p\u003e\n\n\u003ch3\u003eEasy install\u003c\/h3\u003e\n\u003cp\u003eA quick-connect Molex® plug and harness covers power, signal and remote turn-on in one tidy connection. High- and low-level inputs ensure compatibility with nearly any factory or aftermarket head unit, while two automatic turn-on options keep installation straightforward.\u003c\/p\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45713461936394,"sku":"91113","price":399.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-hideaway-hs10-sub-10-compact-powered-active-underseat-subwoofer-180w-rms-47166760517898.jpg?v=1748432710"},{"product_id":"pioneer-ts-a250s4-sub-10-25cm-single-voice-coil-subwoofer-400w-rms","title":"Pioneer TS-A250S4 Sub 10\" 25cm Single Voice Coil Subwoofer 400w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-A250S4 is a 10-inch (25cm) single voice coil subwoofer rated at 400W RMS and 1300W maximum, part of Pioneer's A-series range. It is designed for enclosure use and pairs with A-series speakers and GM-A series amplifiers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 25 cm (10-inch)\u003c\/li\u003e\n\u003cli\u003eVoice coil: single, 4 ohms\u003c\/li\u003e\n\u003cli\u003eContinuous power: 400W RMS\u003c\/li\u003e\n\u003cli\u003eMaximum power: 1300W\u003c\/li\u003e\n\u003cli\u003eCone: injection moulded polypropylene (IMPP™)\u003c\/li\u003e\n\u003cli\u003eTerminals: push type\u003c\/li\u003e\n\u003cli\u003eRange: Pioneer A-series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePioneer TS-A250S4\u003c\/h2\u003e\n\u003cp\u003eA solid 10-inch subwoofer built for enclosure use, delivering deep, controlled bass to complement your existing car audio setup.\u003c\/p\u003e\n\u003cp\u003eThe TS-A250S4 is part of Pioneer's A-series range, designed to work alongside A-series speakers for a matched system upgrade. With 400W RMS handling and a single 4 ohm voice coil, it pairs well with Pioneer's GM-A series amplifiers for clean, powerful bass at any volume. Carefully chosen materials keep distortion low and bass response tight, making this a straightforward upgrade over a factory subwoofer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding midbass response from the injection moulded polypropylene (IMPP™) cone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you need a self-contained solution, Pioneer also offer the \u003ca href=\"\/products\/pioneer-ts-wx300a-sub-active-powered-12-subwoofer-built-in-amplifier-350w-rms\"\u003eTS-WX300A active 12-inch subwoofer with built-in amplifier\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713468883210,"sku":"91388","price":69.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-a250s4-sub-10-25cm-singal-voice-coil-subwoofer-400w-rms-47166776017162.jpg?v=1748432704"},{"product_id":"pioneer-ts-d10d4-sub-d-series-10-25cm-dual-4ohm-voice-coil-subwoofer-500w-rms","title":"Pioneer TS-D10D4 Sub D Series 10\" 25cm Dual 4ohm Voice Coil Subwoofer 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-D10D4 is a 10 inch (25cm) D Series component subwoofer with dual 4 ohm voice coils, rated at 500W RMS (1500W max). It is part of Pioneer's TS-D Series of high-performance car audio subwoofers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the dual 4 ohm (4 Ω x 2) version. The TS-D10D4 is also available with dual 2 ohm voice coils as the \u003ca href=\"\/products\/pioneer-ts-d10d2-sub-d-series-10-25cm-dual-2ohm-voice-coil-subwoofer-500w-rms\"\u003eTS-D10D2\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 25cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS \/ 1500W max\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4 ohm voice coils (4 Ω x 2)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 6.6 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 76 dB\u003c\/li\u003e\n\u003cli\u003eMounting depth: 140 mm\u003c\/li\u003e\n\u003cli\u003eCut-out hole: 230 mm\u003c\/li\u003e\n\u003cli\u003eCone: Aramid Fibre interlaced IMPP™\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: 19.81 litres (0.7 ft³)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTS-D Series Component Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe TS-D Series is designed to produce bold, deep and accurate bass. These subwoofers pair naturally with the TS-D Series of speakers for a cohesive system upgrade.\u003c\/p\u003e\n\u003cp\u003eThe TS-D10D4 delivers low-frequency depth and accuracy with 500W RMS handling and a distortion-free output at any volume level. When paired with Pioneer's GM-D Series amplifiers, the result is powerful, rich, high-quality bass.\u003c\/p\u003e\n\u003cp\u003ePioneer has been developing loudspeaker technology for 80 years, designing and manufacturing each driver in-house to strict performance and quality standards. The Z and D Series are Pioneer's flagship 'High Performance' automotive loudspeaker ranges.\u003c\/p\u003e\n\u003ch2\u003ePERI – Pioneer European Reference Installer\u003c\/h2\u003e\n\u003cp\u003ePioneer has a network of expert PERI-certified installers across Europe with the knowledge and experience to sell and install the Pioneer Z and D Series correctly, maximising performance in your specific vehicle.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713902108938,"sku":"91398","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-d10d4-sub-d-series-10-25cm-dual-4ohm-voice-coil-subwoofer-500w-rms-47167998984458.jpg?v=1748432215"},{"product_id":"pioneer-ts-d10d2-sub-d-series-10-25cm-dual-2ohm-voice-coil-subwoofer-500w-rms","title":"Pioneer TS-D10D2 Sub D Series 10\" 25cm Dual 2ohm Voice Coil Subwoofer 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-D10D2 is a 10-inch (25cm) D-Series component subwoofer with dual 2-ohm voice coils, rated at 500W RMS (1500W max). It is part of Pioneer's TS-D Series of high-performance car audio subwoofers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the dual 2-ohm version. The TS-D10 is also available in \u003ca href=\"\/products\/pioneer-ts-d10d4-sub-d-series-10-25cm-dual-4ohm-voice-coil-subwoofer-500w-rms\"\u003edual 4-ohm (TS-D10D4)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 25cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W RMS \/ 1500W max\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 2 ohm voice coils (2 Ω x 2)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 6.6 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 74 dB\u003c\/li\u003e\n\u003cli\u003eMounting depth: 140 mm\u003c\/li\u003e\n\u003cli\u003eCut-out hole: 230 mm\u003c\/li\u003e\n\u003cli\u003eCone: Aramid Fibre interlaced IMPP™\u003c\/li\u003e\n\u003cli\u003eRecommended enclosure: 19.81 litres (0.7 ft³)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTS-D10D2 25cm \/ 10\" D-Series Component Subwoofer 2 Ohm Dual Voice Coil (DVC)\u003c\/h2\u003e\n\u003ch3\u003ePowerful Bass\u003c\/h3\u003e\n\u003cp\u003eThe Pioneer TS-D Series component subwoofers are designed to produce bold, deep and accurate bass. They pair naturally with other TS-D Series speakers for a matched, high-performance system.\u003c\/p\u003e\n\u003cp\u003eThe TS-D Series combines low-frequency depth with accuracy, delivering big, clear, distortion-free sound at any volume level.\u003c\/p\u003e\n\u003cp\u003eWhen paired with Pioneer's GM-D Series amplifiers, the TS-D Series subwoofers produce rich, powerful bass with no compromise on quality.\u003c\/p\u003e\n\u003cp\u003ePioneer has been developing loudspeaker technology for 80 years. Each Pioneer loudspeaker is designed, engineered and manufactured in-house to Pioneer's own performance and quality standards. The TS-D Series sits within Pioneer's 'High Performance' automotive loudspeaker range alongside the Z Series.\u003c\/p\u003e\n\u003ch2\u003ePERI Pioneer European Reference Installer\u003c\/h2\u003e\n\u003cp\u003ePioneer has a network of expert professional installers across Europe — known as PERI (Pioneer European Reference Installers) — with the knowledge and experience to sell and correctly install the Pioneer Z and D Series, ensuring maximum performance in your specific vehicle.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713902207242,"sku":"91397","price":149.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-d10d2-sub-d-series-10-25cm-dual-2ohm-voice-coil-subwoofer-500w-rms-47167999607050.jpg?v=1748432207"},{"product_id":"pioneer-ts-d10lb-sub-d-series-10-25cm-passive-slim-subwoofer-enclosure-350w-rms","title":"Pioneer TS-D10LB Sub D Series 10\" 25cm Passive Slim Subwoofer Enclosure 350w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Pioneer TS-D10LB is a 10 inch (25cm) D-Series shallow passive subwoofer enclosure rated at 350W RMS (1300W max) at 2 ohms — a ready-boxed bass upgrade from Pioneer's D-Series range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrefer a powered option instead? See the \u003ca href=\"\/products\/pioneer-ts-wx1010la-powered-active-subwoofer-shallow-sub-bass-remote-300w-rms\"\u003ePioneer TS-WX1010LA powered shallow subwoofer\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 25cm\u003c\/li\u003e\n\u003cli\u003eType: shallow passive enclosed subwoofer\u003c\/li\u003e\n\u003cli\u003ePower handling: 350W RMS \/ 1300W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 Ω\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 3.4 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 74 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil: copper round wire 4-layer long voice coil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTS-D10LB 25cm \/ 10\" D-Series Shallow Enclosed Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Pioneer TS-D Series delivers bold, powerful deep bass and is designed to pair directly with the TS-D Series of speakers. The range combines low-frequency depth with accuracy and distortion-free output at any volume level.\u003c\/p\u003e\n\u003cp\u003eWhen paired with Pioneer's GM-D Series of amplifiers, the TS-D Series subwoofers deliver rich, high-quality bass regardless of volume.\u003c\/p\u003e\n\u003cp\u003ePioneer has been developing loudspeaker technology for 80 years, designing, engineering and manufacturing each speaker in-house to its own performance and quality standards. The D-Series sits within Pioneer's 'High Performance' automotive loudspeaker lineup.\u003c\/p\u003e\n\u003ch2\u003ePERI Pioneer European Reference Installer\u003c\/h2\u003e\n\u003cp\u003ePioneer maintains a network of expert PERI-certified professionals across Europe with the knowledge and experience to sell and install the Pioneer Z and D series to the highest standard.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45713902338314,"sku":"91399","price":225.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/pioneer-subwoofer-pioneer-ts-d10lb-sub-d-series-10-25cm-passive-slim-subwoofer-enclosure-350w-rms-47168000917770.jpg?v=1748432210"},{"product_id":"kicker-49l7tdf102-sub-10-inch-l7t-subwoofer-down-firing-loaded-enclosure-500w","title":"Kicker 49L7TDF102 Sub 10 Inch L7T Subwoofer Down Firing Loaded Enclosure 500w","description":"\u003cp\u003e\u003cstrong\u003eThe Kicker 49L7TDF102 is a 10 inch square L7T thin subwoofer in a down-firing sealed enclosure, rated at 500W RMS into a single 2 ohm terminal. It is part of Kicker's L7T Down-Firing Loaded Enclosure range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is the 10 inch. The L7T Down-Firing Loaded Enclosure range is also available in \u003ca href=\"\/products\/kicker-l7tdf122-sub-12-inch-l7t-subwoofer-down-firing-loaded-enclosure-600w\"\u003e12 inch (49L7TDF122, 600W)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSubwoofer: 10\" square L7T, included\u003c\/li\u003e\n\u003cli\u003eDesign: down-firing, sealed\u003c\/li\u003e\n\u003cli\u003eImpedance: single 2 ohm terminal\u003c\/li\u003e\n\u003cli\u003eRMS power: 500W\u003c\/li\u003e\n\u003cli\u003ePeak power: 1000W\u003c\/li\u003e\n\u003cli\u003eSensitivity: 84.1 dB 1W\/1m\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25–100 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions: 59.5 cm W x 36.5 cm D x 15.6 cm H\u003c\/li\u003e\n\u003cli\u003eGrilles: not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eL7T 10\" Down-Firing Loaded Enclosure – 2 Ohm\u003c\/h2\u003e\n\u003ch2\u003e49L7TDF102\u003c\/h2\u003e\n\u003cp\u003eL7T Down-Firing Loaded Enclosures combine an ultra-thin square subwoofer with a custom-tuned box, designed to deliver powerful bass without sacrificing boot space.\u003c\/p\u003e\n\u003cp\u003eRated at 500W RMS, the L7T uses Kicker's signature square sub design, which offers nearly 20% more cone area than a comparable round subwoofer — moving more air and producing louder bass in the same footprint.\u003c\/p\u003e\n\u003cp\u003eThe down-firing enclosure uses thick MDF construction with internal bracing to resist stacking weight and surface scratches.\u003c\/p\u003e\n\u003cp\u003eThe L7T features Forced-Air Cooling™ for high power handling and long-term reliability. As the cone moves downward, hot air around the voice coil is expelled. As it moves upward, cool outside air is drawn in to cool the voice coil.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10 inch L7T subwoofer\u003c\/li\u003e\n\u003cli\u003e2 ohm\u003c\/li\u003e\n\u003cli\u003eRMS power handling: 500W\u003c\/li\u003e\n\u003cli\u003eDown-firing design provides protection for the subwoofer\u003c\/li\u003e\n\u003cli\u003eThick MDF construction with strong internal bracing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kicker","offers":[{"title":"Default Title","offer_id":45713945723146,"sku":"91082","price":349.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/kicker-subwoofer-kicker-49l7tdf102-sub-10-inch-l7t-subwoofer-down-firing-loaded-enclosure-500w-47168088015114.jpg?v=1748432115"},{"product_id":"hertz-mille-pro-mps-250-s4-sub-10-25cm-shallow-car-subwoofer-4-ohm-500w-rms","title":"Hertz Mille Pro MPS 250 S4 Sub 10\" 25cm Shallow Car Subwoofer 4 Ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MPS 250 S4 is a 10-inch (25cm) shallow car subwoofer from the Hertz Mille Pro range, rated at 500W RMS \/ 1000W peak with a single 4-ohm voice coil and an 82.6mm mounting depth.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250mm (10\")\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W continuous \/ 1000W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohms, single voice coil\u003c\/li\u003e\n\u003cli\u003eMounting depth: 82.6mm (3.25\")\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25Hz – 400Hz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 38mm (1.5\"), 6 layers\u003c\/li\u003e\n\u003cli\u003eSealed box volume: from 14 litres (0.49 cu ft)\u003c\/li\u003e\n\u003cli\u003eXmech: 20mm (0.79\")\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMPS 250 S4 4 Ohm Single Voice Coil\u003c\/h2\u003e\n\n\u003cp\u003eThe MPS 250 S4 is optimised for ultra-compact sealed boxes from just 14 litres (0.49 cu ft) — ideal for installations such as under the rear bench of pickup trucks where both space and height are restricted.\u003c\/p\u003e\n\n\u003cp\u003eMille Pro shallow subwoofers deliver strong depth-to-performance ratios thanks to high cone excursion capacity. This is achieved through a dedicated suspension structure for the spider and coil that allows the magnetic group to move inwards, reducing overall depth while maximising linear excursion.\u003c\/p\u003e\n\n\u003cp\u003e500W continuous power handling is made possible by Hertz's proprietary AIR (Air Intercooling Revolution) technology, which optimises fluid dynamics within the internal acoustic structure and magnetic group to reduce air compression and maximise cooling. The 6-layer, 38mm (1.5\") voice coil features cooling openings on the former to maintain thermal stability during high-SPL use.\u003c\/p\u003e\n\n\u003cp\u003eThe magnetic unit has been FEM simulated to maximise force factor (BxL) symmetry, ensuring optimal linearity at high excursions and controlling inductance modulation. Pole piece geometry has been refined using a dedicated simulation model to further improve the unit force factor.\u003c\/p\u003e\n\n\u003cp\u003eHertz R\u0026amp;D also modelled cone and enclosure behaviour to account for the non-linear spring effect of air inside a sealed box, keeping the system as linear as possible at high excursions.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45713956798730,"sku":"90852","price":399.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mps-250-s4-sub-10-25cm-shallow-car-subwoofer-4-ohm-500w-rms-47168102498570.jpg?v=1748432118"},{"product_id":"hertz-mille-pro-mps-250-s2-sub-10-25cm-shallow-car-subwoofer-2-ohm-500w-rms","title":"Hertz Mille Pro MPS 250 S2 Sub 10\" 25cm Shallow Car Subwoofer 2 Ohm 500w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Hertz Mille Pro MPS 250 S2 is a 10\" (25 cm) shallow-mount car subwoofer from the Mille Pro range, rated at 500W RMS with a single 2 ohm voice coil and a mounting depth of just 82.6 mm.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250 mm (10 inch)\u003c\/li\u003e\n\u003cli\u003ePower handling: 500W continuous, 1000W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 ohms, single voice coil\u003c\/li\u003e\n\u003cli\u003eMounting depth: 82.6 mm (3.25 inch)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 Hz to 400 Hz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 38 mm (1.5 inch), 6-layer\u003c\/li\u003e\n\u003cli\u003eXmech: 20 mm\u003c\/li\u003e\n\u003cli\u003eMinimum sealed box volume: 14 litres (0.49 cu ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMPS 250 S2: 2 ohm single voice coil\u003c\/h2\u003e\n\u003cp\u003eMille Pro shallow subwoofers are built to deliver strong performance where space for a subwoofer box is tight.\u003c\/p\u003e\n\n\u003ch2\u003eExtreme dynamics, high power handling, realistic sound stage\u003c\/h2\u003e\n\u003cp\u003eThe MPS 250 is optimised for ultra-compact sealed boxes from just 14 litres (0.49 cu ft). A typical use case is a subwoofer enclosure under the rear bench of a pickup truck, where height and space are limited.\u003c\/p\u003e\n\u003cp\u003eShallow mounting depth is combined with a large cone excursion capacity (Xmech 20 mm). This is achieved through a suspension group design with a dedicated support structure for the spider and coil, which moves the magnetic group inwards — reducing depth while maximising linear cone excursion.\u003c\/p\u003e\n\u003cp\u003e500W continuous power handling is strong for a subwoofer this compact. Hertz achieved it using their proprietary AIR (Air Intercooling Revolution) technology, which optimises the fluid dynamics of the inner acoustic structure and magnetic group to minimise internal air compression and maximise cooling. The 6-layer, 38 mm (1.5 inch) voice coil includes cooling openings on the former for added thermal stability, making the MPS ready for demanding high-SPL sessions.\u003c\/p\u003e\n\u003cp\u003eThe magnetic unit was FEM simulated to maximise force factor (BxL) symmetry for optimal linearity at high excursions, with tight control of inductance modulation. Pole piece geometry was further refined using a simulation model to improve force factor performance.\u003c\/p\u003e\n\u003cp\u003eHertz R\u0026amp;D also modelled cone and enclosure behaviour: inside a sealed box, air acts as a non-linear spring whose effect must be compensated to keep the system as linear as possible at high excursions.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45713959223562,"sku":"90851","price":399.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/hertz-subwoofer-hertz-mille-pro-mps-250-s2-sub-10-25cm-shallow-car-subwoofer-2-ohm-500w-rms-47168106725642.jpg?v=1748432111"},{"product_id":"helix-ik-es10-1-dvc2-subwoofer-10-inch-downfire-shallow-sub-enclosure-300w-rms","title":"Helix IK ES10.1-DVC2 Subwoofer 10 Inch Downfire Shallow Sub Enclosure 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Helix IK ES10.1-DVC2 is a 10 inch (250 mm) downfire shallow ported subwoofer enclosure, rated at 300W RMS and standing just 135 mm high. It belongs to the Helix IK range and is designed for concealed installs such as a double loading floor.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10 inch ES model. The Helix IK downfire shallow enclosure range is also available in an \u003ca href=\"\/products\/helix-ik-e8-1-dvc2-sub-8-inch-downfire-compact-subwoofer-enclosure-300w-rms\"\u003e8 inch version (IK E8.1-DVC2)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 250 mm downfire ported enclosure\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 150–300W RMS\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 x 2 ohm, 1 x 4 ohm or 1 x 1 ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91 dB @ 2.83V \/ 1m, 88 dB @ 1W \/ 1m\u003c\/li\u003e\n\u003cli\u003ePort tuning: 37 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 135 x 725 x 350 mm\u003c\/li\u003e\n\u003cli\u003eChassis: Helix IK S10-DVC2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaximum bass performance, minimum overall height\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDownfire enclosure for ideal bass dispersion and protection of the speaker\u003c\/li\u003e\n\u003cli\u003eExtremely shallow ported design delivers high sound pressure with space-saving fitment\u003c\/li\u003e\n\u003cli\u003eEquipped with a 250 mm \/ 10 inch woofer with sandwich paper cone for deep, rich bass\u003c\/li\u003e\n\u003cli\u003eMagnet system bolted to the rear panel of the enclosure for added stiffness and reduced vibration\u003c\/li\u003e\n\u003cli\u003ePluggable screw terminal for quick, safe installation and removal\u003c\/li\u003e\n\u003cli\u003eVoice coil impedance configurable via connection terminal — 2 x 2 ohms, 1 x 4 ohms or 1 x 1 ohm\u003c\/li\u003e\n\u003cli\u003eFeet with Velcro tape for a secure stand in the vehicle\u003c\/li\u003e\n\u003cli\u003eSturdy carpet surface with embroidered Helix logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe IK ES10.1-DVC2 combines powerful bass with an exceptionally flat enclosure, developed specifically for hidden installation concepts such as a double loading floor, where traditional subwoofers won't fit.\u003c\/p\u003e\n\n\u003ch2\u003eSmart downfire design\u003c\/h2\u003e\n\u003cp\u003eThe downfire construction uses the vehicle floor as an acoustic reflection surface to intensify low-frequency output, protecting the speaker and keeping the overall profile low. Combined with bass-reflex technology and a powerful 250 mm chassis, it delivers dynamic bass with impressive sound pressure while making efficient use of available space.\u003c\/p\u003e\n\n\u003ch2\u003eImpressive sound through smart engineering and high-quality components\u003c\/h2\u003e\n\u003cp\u003eExtremely flat enclosures require careful engineering to prevent unwanted cabinet vibration. On the IK ES10.1-DVC2, the subwoofer's magnet system is bolted directly to the rear panel for added reinforcement.\u003c\/p\u003e\n\u003cp\u003eThe enclosure uses the Helix IK S10-DVC2 250 mm shallow-mount subwoofer chassis, featuring a heavy-duty dual voice coil and a rigid sandwich paper cone that converts amplifier power efficiently into high sound pressure with accurate bass reproduction.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible connectivity\u003c\/h2\u003e\n\u003cp\u003eThe dual voice coil design gives flexibility when choosing a power amplifier. Configurations of 1 x 4 ohms, 2 x 2 ohms or 1 x 1 ohm are all supported via the connection terminal.\u003c\/p\u003e\n\n\u003ch2\u003eRugged, practical, and easy to install\u003c\/h2\u003e\n\u003cp\u003eThe enclosure is finished in a sturdy carpet with an embroidered Helix logo. Velcro-equipped feet provide a secure, stable position in the vehicle. The pluggable screw terminal simplifies installation and makes removal straightforward when extra load space is needed, with the detachable connector leaving no exposed wiring in the vehicle.\u003c\/p\u003e","brand":"Helix","offers":[{"title":"Default Title","offer_id":45713972986122,"sku":"90737","price":269.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/Helix_IK_ES10.1-DVC2.jpg?v=1759756959"},{"product_id":"helix-ik-e10-1-dvc2-subwoofer-10-inch-downfire-compact-sub-enclosure-300w-rms","title":"Helix IK E10.1-DVC2 Subwoofer 10 Inch Downfire Compact Sub Enclosure 300w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Helix IK E10.1-DVC2 is a 10 inch (250 mm) downfire compact ported subwoofer enclosure rated at 300W RMS (600W max), from the Helix IK range. Its dual 2 ohm voice coil is configurable as 2 x 2, 1 x 4 or 1 x 1 ohm at the terminal, making it compatible with a wide range of amplifier setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10 inch DVC2 version. The Helix IK downfire compact sub is also available in \u003ca href=\"\/products\/helix-ik-e8-1-dvc2-sub-8-inch-downfire-compact-subwoofer-enclosure-300w-rms\"\u003e8 inch (IK E8.1-DVC2)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThis is the dual voice coil version. The \u003ca href=\"\/products\/helix-ik-e10-1-svc2-subwoofer-10-inch-downfire-compact-sub-enclosure-300w-rms\"\u003eIK E10.1-SVC2\u003c\/a\u003e is the single 2 ohm version, and the \u003ca href=\"\/products\/helix-ik-es10-1-dvc2-subwoofer-10-inch-downfire-shallow-sub-enclosure-300w-rms\"\u003eIK ES10.1-DVC2\u003c\/a\u003e is a shallower 10 inch alternative.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 250 mm downfire ported enclosure\u003c\/li\u003e\n\u003cli\u003ePower handling: 300W RMS, 600W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 x 2 ohm, 1 x 4 ohm or 1 x 1 ohm\u003c\/li\u003e\n\u003cli\u003eMax. linear excursion: +\/- 8.0 mm\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91 dB @ 2.83V \/ 1m, 88 dB @ 1W \/ 1m\u003c\/li\u003e\n\u003cli\u003ePort tuning: 43 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 187 x 470 x 375 mm\u003c\/li\u003e\n\u003cli\u003eRecommended DSP: highpass 37 Hz, Q = 1.5\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHELIX IK E10.1-DVC2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDownfire enclosure for ideal bass dispersion and speaker protection\u003c\/li\u003e\n\u003cli\u003eCompact ported design delivers high sound pressure with space-saving installation\u003c\/li\u003e\n\u003cli\u003e250 mm \/ 10\" subwoofer with hand-scooped paper cone for rich, deep bass\u003c\/li\u003e\n\u003cli\u003eVoice coil impedance configurable via connection terminal: 2 x 2 ohm, 1 x 4 ohm or 1 x 1 ohm\u003c\/li\u003e\n\u003cli\u003ePluggable screw terminal for quick, safe installation and removal\u003c\/li\u003e\n\u003cli\u003eFeet with Velcro tape for a secure stand in the vehicle\u003c\/li\u003e\n\u003cli\u003eSturdy carpet surface with embroidered HELIX logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe IK E10.1 delivers deep, punchy bass in a compact format — ideal for those who want serious low-frequency performance without the bulk of a conventional enclosure.\u003c\/p\u003e\n\n\u003ch2\u003eSmart downfire design\u003c\/h2\u003e\n\u003cp\u003eThe downfire construction uses the vehicle floor as an acoustic reflection surface to intensify low-frequency output, while also protecting the speaker and keeping the overall profile low. Combined with bass-reflex technology and the 250 mm chassis, it produces strong, dynamic bass while making efficient use of available space.\u003c\/p\u003e\n\n\u003ch2\u003eHigh-grade components for sonic strength\u003c\/h2\u003e\n\u003cp\u003eThe IK E10.1 uses the 250 mm IK W10 chassis. Its stiff hand-scooped paper fibre cone and heavy-duty driver system convert amplifier power into high sound pressure without compression — and resolve subtle bass detail cleanly.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible connection\u003c\/h2\u003e\n\u003cp\u003eThe DVC2 dual 2 ohm voice coil can be wired as 2 x 2, 1 x 4 or 1 x 1 ohm, giving flexibility to match most amplifier configurations and maximise power output. For best results, Helix recommend pairing this sub with a DSP — such as the \u003ca href=\"\/products\/helix-dsp-mini-mk2-compact-6-channel-digital-signal-processor-64-bit-audio-dsp-1\"\u003eHelix DSP Mini MK2\u003c\/a\u003e — and setting a highpass filter at 37 Hz with Q = 1.5.\u003c\/p\u003e\n\n\u003ch2\u003eRugged, practical, and easy to install\u003c\/h2\u003e\n\u003cp\u003eThe enclosure is finished in sturdy carpet with an embroidered HELIX logo. Velcro-taped feet hold it firmly in place in the vehicle. The pluggable screw terminal simplifies installation and makes removal straightforward when extra boot space is needed. The detachable connector also prevents short circuits by ensuring no exposed wiring is left in the vehicle.\u003c\/p\u003e","brand":"Helix","offers":[{"title":"Default Title","offer_id":45713974264074,"sku":"92572","price":269.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/HelixIK10E.2.jpg?v=1759754810"},{"product_id":"focal-sub-10-performance-slim-compact-shallow-10-inch-car-subwoofer-230w-rms","title":"Focal Sub 10 Performance Slim Compact Shallow 10 Inch Car Subwoofer 230w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal Sub 10 Slim is a shallow-mount, compact 10 inch (25 cm) car subwoofer rated at 230W RMS (460W max), with a 4 ohm single voice coil. It belongs to Focal's Subwoofer Line and is designed to fit in restricted spaces such as the sides of a car boot.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the shallow-mount version. For a standard-depth driver see the \u003ca href=\"\/products\/focal-sub-10-performance-single-voice-coil-10-inch-4-ohm-car-subwoofer-250w-rms-1\"\u003eSUB 10\u003c\/a\u003e or \u003ca href=\"\/products\/focal-sub-10-performance-dual-voice-coil-10-inch-2-ohm-car-subwoofer-250w-rms\"\u003eSUB 10 Dual Voice Coil\u003c\/a\u003e; the \u003ca href=\"\/products\/focal-sub-grill-for-10-inch-performance-subwoofer-sub-10-sub-10-dual-sub-10-slim\"\u003eFocal 10 inch subwoofer grill\u003c\/a\u003e fits all three.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 25 cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 230W RMS, 460W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eSensitivity: 85 dB\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene with butyl surround\u003c\/li\u003e\n\u003cli\u003eChassis: steel\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed, from 10 L\u003c\/li\u003e\n\u003cli\u003eDesign: shallow depth for tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFocal SUB 10 Slim: compact subwoofer, Subwoofer Line\u003c\/h2\u003e\n\u003cp\u003eDesigned and developed in France, the Sub 10 Slim features a 10 inch (25 cm) polypropylene cone and a single voice coil architecture. Its very shallow depth makes it easy to install in restricted spaces such as the sides of a car boot.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShallow depth; easy to install in tight spaces\u003c\/li\u003e\n\u003cli\u003eDeep, powerful bass reproduction\u003c\/li\u003e\n\u003cli\u003eEffective in a sealed box from 10 L\u003c\/li\u003e\n\u003cli\u003eRobust steel chassis\u003c\/li\u003e\n\u003cli\u003e230W RMS power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePolypropylene cone\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone provides high rigidity, resisting distortion at loud volumes — well suited to subwoofer use.\u003c\/p\u003e\n\n\u003ch2\u003eSimple connection\u003c\/h2\u003e\n\u003cp\u003eScrewable terminals make connecting the Sub 10 Slim to an audio system straightforward and reliable.\u003c\/p\u003e\n\n\u003ch2\u003eBoosted bass\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone reproduces powerful low frequencies effectively. Adding a subwoofer to an in-car system significantly improves overall sound quality, particularly for dynamics.\u003c\/p\u003e\n\n\u003ch2\u003eTotal compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with all Focal Car Audio products, the Sub 10 Slim is recommended to complement Auditor, Access, Universal, Polyglass and Slatefiber systems. It works in sealed and bass-reflex enclosures, with the slim design also suiting compact sealed boxes.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45714166513930,"sku":"90566","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub-10-performance-slim-compact-shallow-10-inch-car-subwoofer-230w-rms-47168477987082.jpg?v=1748431982"},{"product_id":"focal-sub-10-performance-dual-voice-coil-10-inch-2-ohm-car-subwoofer-250w-rms","title":"Focal Sub 10 Performance Dual Voice Coil 10 Inch 2 Ohm Car Subwoofer 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal SUB 10 Dual is a 10-inch (25 cm) dual voice coil car subwoofer from Focal's Subwoofer Line, rated at 250W RMS (500W max). Its 4 + 4 ohm voice coils can be wired in parallel for 2 ohm operation, letting you exploit an amplifier's full power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the dual voice coil version. The SUB 10 is also available as the \u003ca href=\"\/products\/focal-sub-10-performance-single-voice-coil-10-inch-4-ohm-car-subwoofer-250w-rms-1\"\u003eSUB 10 single voice coil 4 ohm\u003c\/a\u003e and the shallow \u003ca href=\"\/products\/focal-sub-10-performance-slim-compact-shallow-10-inch-car-subwoofer-230w-rms\"\u003eSUB 10 Slim\u003c\/a\u003e. The matching \u003ca href=\"\/products\/focal-sub-grill-for-10-inch-performance-subwoofer-sub-10-sub-10-dual-sub-10-slim\"\u003eFocal 10-inch subwoofer grill\u003c\/a\u003e fits all three.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 25 cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 250W RMS, 500W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 + 4 ohm dual voice coil (2 ohm in parallel)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 85 dB\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene with butyl surround\u003c\/li\u003e\n\u003cli\u003eChassis: steel\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed from 10 L, bass-reflex from 25 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFocal SUB 10 Dual: dual voice coil subwoofer, Subwoofer Line\u003c\/h2\u003e\n\u003cp\u003eDesigned and developed in France, the SUB 10 Dual features a 10-inch (25 cm) polypropylene cone and a dual voice coil architecture. Wiring the coils in parallel gives 2 ohm operation, allowing an amplifier's maximum power to be fully exploited.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeep, powerful bass reproduction\u003c\/li\u003e\n\u003cli\u003eWorks in sealed or bass-reflex enclosures\u003c\/li\u003e\n\u003cli\u003eSealed box from 10 L\u003c\/li\u003e\n\u003cli\u003eBass-reflex box from 25 L\u003c\/li\u003e\n\u003cli\u003eRobust steel chassis\u003c\/li\u003e\n\u003cli\u003e250W RMS power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePolypropylene cone\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone offers high rigidity, resisting distortion at loud volumes — well suited to subwoofer use.\u003c\/p\u003e\n\n\u003ch2\u003eSimple connection\u003c\/h2\u003e\n\u003cp\u003eScrewable terminals make connecting the SUB 10 Dual to your audio system straightforward and secure.\u003c\/p\u003e\n\n\u003ch2\u003eBoosted bass\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone reproduces powerful low frequencies effectively. Adding a subwoofer to an in-car system significantly improves overall sound quality, particularly in dynamics.\u003c\/p\u003e\n\n\u003ch2\u003eTotal compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with all Focal car audio products, the SUB 10 Dual is particularly recommended to complement Auditor, Access, Universal, Polyglass and Slatefiber systems. It works efficiently in both sealed and bass-reflex setups.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45714166776074,"sku":"90564","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub-10-performance-dual-voice-coil-10-inch-2-ohm-car-subwoofer-250w-rms-47168478707978.jpg?v=1748432015"},{"product_id":"focal-sub-10-performance-single-voice-coil-10-inch-4-ohm-car-subwoofer-250w-rms-1","title":"Focal Sub 10 Performance Single Voice Coil 10 Inch 4 Ohm Car Subwoofer 250w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Focal SUB 10 is a 10 inch (25 cm) single voice coil 4 ohm car subwoofer from Focal's Subwoofer Line, rated at 250W RMS (500W max). Its polypropylene cone and steel chassis deliver deep, powerful bass in either a sealed or bass-reflex enclosure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the single voice coil 4 ohm version. The SUB 10 is also available as the \u003ca href=\"\/products\/focal-sub-10-performance-dual-voice-coil-10-inch-2-ohm-car-subwoofer-250w-rms\"\u003eSUB 10 Dual Voice Coil\u003c\/a\u003e and the \u003ca href=\"\/products\/focal-sub-10-performance-slim-compact-shallow-10-inch-car-subwoofer-230w-rms\"\u003eSUB 10 Slim\u003c\/a\u003e. The matching \u003ca href=\"\/products\/focal-sub-grill-for-10-inch-performance-subwoofer-sub-10-sub-10-dual-sub-10-slim\"\u003eFocal 10 inch subwoofer grill\u003c\/a\u003e fits all three.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10 inch \/ 25 cm\u003c\/li\u003e\n\u003cli\u003ePower handling: 250W RMS, 500W max\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 ohm single voice coil\u003c\/li\u003e\n\u003cli\u003eSensitivity: 85 dB\u003c\/li\u003e\n\u003cli\u003eCone: polypropylene with butyl surround\u003c\/li\u003e\n\u003cli\u003eChassis: steel\u003c\/li\u003e\n\u003cli\u003eEnclosure: sealed from 10 L, bass-reflex from 25 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFocal SUB 10: single voice coil subwoofer, Subwoofer Line\u003c\/h2\u003e\n\u003cp\u003eDesigned and developed in France, the SUB 10 features a 10 inch (25 cm) polypropylene cone and a single voice coil architecture for straightforward wiring and reliable bass output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeep and powerful bass\u003c\/li\u003e\n\u003cli\u003eWorks in sealed boxes from 10 L or bass-reflex boxes from 25 L\u003c\/li\u003e\n\u003cli\u003eSteel chassis for robust build quality\u003c\/li\u003e\n\u003cli\u003e250W RMS power handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePolypropylene cone\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone provides high rigidity, reducing distortion at loud volumes — well suited to subwoofer use.\u003c\/p\u003e\n\n\u003ch2\u003eSimple connection\u003c\/h2\u003e\n\u003cp\u003eScrewable terminals make connecting the SUB 10 to your audio system straightforward and secure.\u003c\/p\u003e\n\n\u003ch2\u003eBoosted bass\u003c\/h2\u003e\n\u003cp\u003eThe polypropylene cone reproduces powerful low frequencies effectively. Adding a subwoofer to an in-car system significantly improves overall sound quality, particularly dynamics.\u003c\/p\u003e\n\n\u003ch2\u003eTotal compatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with all Focal car audio products, the SUB 10 is particularly recommended to complement Auditor, Access, Universal, Polyglass and Slatefiber systems. It performs well in both sealed and bass-reflex enclosures.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":45714167431434,"sku":"90565","price":109.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/focal-subwoofer-focal-sub-10-performance-single-voice-coil-10-inch-4-ohm-car-subwoofer-250w-rms-47168480018698.jpg?v=1748431978"},{"product_id":"alpine-r2-w10d4-sub-10-25cm-r-series-subwoofer-dual-4-ohm-voice-coils-750w-rms","title":"Alpine R2-W10D4 Sub 10\" 25cm R Series Subwoofer Dual 4 Ohm Voice Coils 750w RMS","description":"\u003cp\u003e\u003cstrong\u003eThe Alpine R2-W10D4 is a 10-inch (25cm) second-generation R-Series car subwoofer with dual 4-ohm voice coils, rated at 750W RMS and 2250W peak. It suits bass upgrades that need deep, accurate output and flexible wiring from a single 10-inch sub.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing is the 10\" version. The Alpine R2 R-Series subwoofer is also available as a \u003ca href=\"\/products\/alpine-r2-w12d2-sub-12-30cm-r-series-subwoofer-dual-2-ohm-voice-coils-750w-rms\"\u003e12\" dual 2-ohm model (R2-W12D2)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eKey specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 10\" (25cm)\u003c\/li\u003e\n\u003cli\u003ePower handling: 750W RMS \/ 2250W peak\u003c\/li\u003e\n\u003cli\u003eImpedance: dual 4-ohm voice coils (4Ω + 4Ω)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 26Hz - 200Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1W\/1m): 82.4dB\u003c\/li\u003e\n\u003cli\u003eX-Max: 20mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 152mm (6\")\u003c\/li\u003e\n\u003cli\u003eCutout size: 231mm (9-1\/16\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eR Series: The Next Evolution of Proven Performance\u003c\/h2\u003e\n\u003cp\u003eThe 2nd-Gen R-Series subwoofers draw on decades of Alpine engineering experience. They deliver deep, clean, accurate bass using a larger motor structure for better woofer control and more authoritative output than the previous generation.\u003c\/p\u003e\n\n\u003ch2\u003eNew Motor Structure\u003c\/h2\u003e\n\u003cp\u003eLarger, double-stacked magnets provide more motor force for deeper, tighter bass. An integrated Faraday ring minimises distortion, and a Kevlar-treated cone ensures reliable performance even at high volumes.\u003c\/p\u003e\n\n\u003ch2\u003eNext-Gen Sound Performance\u003c\/h2\u003e\n\u003cp\u003eBuilding on the Type R platform, Alpine's R-Series has long been known for high output and reliable performance. The 2nd-Gen models push that further with even greater bass output.\u003c\/p\u003e\n\n\u003ch2\u003eAdditional Reliability\u003c\/h2\u003e\n\u003cp\u003eA polypropylene\/ceramic composite dust cap adds rigidity, internal damping and heat resistance — keeping bass response tight and performance consistent during extended use.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Application\u003c\/h2\u003e\n\u003cp\u003eThe dual voice coil (DVC) design includes easy configuration jumpers for flexible wiring options. An \"EZ-Change\" twist-lock grille mounting system lets you fit or remove an optional grille without screws. Pair this sub with an amplifier you can control on the fly using the \u003ca href=\"\/products\/alpine-rux-knob2-remote-bass-subwoofer-level-control-for-x-r-s-v-pdx-series-amps\"\u003eAlpine RUX-KNOB2 remote bass level control\u003c\/a\u003e, compatible with Alpine R-Series amplifiers.\u003c\/p\u003e\n\n\u003ch2\u003eIncreased Accuracy\u003c\/h2\u003e\n\u003cp\u003eAlpine's High Amplitude Multi-Roll (HAMR) Surround technology allows 20mm of total cone excursion. The rubber surround lets the cone move air efficiently while managing heat, delivering accurate bass output at all listening levels.\u003c\/p\u003e","brand":"Alpine","offers":[{"title":"Default Title","offer_id":45714216550666,"sku":"90042","price":189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/5431\/0922\/files\/alpine-subwoofer-alpine-r2-w10d4-sub-10-25cm-r-series-subwoofer-dual-4-ohm-voice-coils-750w-rms-47168572588298.jpg?v=1748430290"}],"url":"https:\/\/www.cen.uk\/collections\/10-inch-subwoofers.oembed?page=2","provider":"CEN","version":"1.0","type":"link"}