Audison Authorised Retailer and Installer Nottingham 2 YEAR WARRANTY EARN 189 CEN POINTS

Audison Prima APS 8 R 8" Car Subwoofer Driver Single 4 Ohm Sub with Grill 250w RMS

Audison Prima APS 8 R 8" Car Subwoofer Driver Single 4 Ohm Sub with Grill 250w RMS

Order now. Select express for delivery

Next Working Day Delivery

Select Express Delivery at the checkout, Unfortunately we do not offer a Saturday Delivery.

£0
£189
IN STOCK
WE HAVE MORE ON ORDER. EXPECTED AVAILABILITY 1-2 WEEKS.

NOTIFY ME WHEN IN STOCK? WE'LL SEND YOU AN EMAIL WHEN THIS ITEM IS BACK IN STOCK.

Prima APS 8 R

Subwoofer Driver | 500 W Peak Power | 200 mm | 4 ohm

Audison Prima

Audison Prima was designed to meet the interest of the car model enthusiasts who like to appreciate all the nuances of the musical message with components that are perfectly integrated in the car OEM system, preserving the most precious Prima on Audison requirement of OEM integration: space.

With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output.

  • Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility.
  • Designed to deliver maximum performance in a reflex enclosure starting from 8.5 lt.
  • Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm,
  • one-way) while keeping the mounting depth to minimum.
  • Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
  • Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
  • Water-repellent pressed paper 8 in. cone featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
  • Specifically developed to be combined with either the Audison AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers.
  • Steel mesh grille and plastic gasket included.

However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

  • Size    200 mm
  • Power Handling - Peak    500 W
  • Power Handling - Continuous    250 W
  • Impedance    4 Ohm
  • Magnet Material    HIGH DENSITY FLUX FERRITE
  • Voice Coil Ø    40 mm
  • Woofer Qes    0,43
  • Cone Material    WATER REPELLENT PRESSED PAPER
  • Xmax    8.8 mm
  • Xmech    16.5 mm
  • D    173 mm
  • Driver Displacement Volume    0.67
  • Re    3.7 Ohm
  • Fs    32 Hz
  • Vas    26.5 l
  • Mms    80 g
  • Cms    0.33 mm/N
  • BL    11.5 T•m
  • Qms    5.1
  • Qts    0.41
  • Le Standard    1.45 mH
  • Spl    84 dB
  • Audison Prima APS 8 R
  • Steel mesh grille and plastic gasket
  • Product Information

    Prima APS 8 R

    Subwoofer Driver | 500 W Peak Power | 200 mm | 4 ohm

    Audison Prima

    Audison Prima was designed to meet the interest of the car model enthusiasts who like to appreciate all the nuances of the musical message with components that are perfectly integrated in the car OEM system, preserving the most precious Prima on Audison requirement of OEM integration: space.

    With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output.

    • Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility.
    • Designed to deliver maximum performance in a reflex enclosure starting from 8.5 lt.
    • Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm,
    • one-way) while keeping the mounting depth to minimum.
    • Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
    • Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
    • Water-repellent pressed paper 8 in. cone featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
    • Specifically developed to be combined with either the Audison AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers.
    • Steel mesh grille and plastic gasket included.

    However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

  • Specification
    • Size    200 mm
    • Power Handling - Peak    500 W
    • Power Handling - Continuous    250 W
    • Impedance    4 Ohm
    • Magnet Material    HIGH DENSITY FLUX FERRITE
    • Voice Coil Ø    40 mm
    • Woofer Qes    0,43
    • Cone Material    WATER REPELLENT PRESSED PAPER
    • Xmax    8.8 mm
    • Xmech    16.5 mm
    • D    173 mm
    • Driver Displacement Volume    0.67
    • Re    3.7 Ohm
    • Fs    32 Hz
    • Vas    26.5 l
    • Mms    80 g
    • Cms    0.33 mm/N
    • BL    11.5 T•m
    • Qms    5.1
    • Qts    0.41
    • Le Standard    1.45 mH
    • Spl    84 dB
  • What's Included
    • Audison Prima APS 8 R
    • Steel mesh grille and plastic gasket
View / write a review

There are no reviews for this product.